User manual BEKO Air-conditioner : 77 free PDF user manuals

Q: How to solve a Homewhiz connection problem on the Beko BP109AC?

Homewhiz setup steps: Make sure your phone is connected to your home WiFi network Download the HomeWhiz app and register with your email address Turn on the device and press the SPEED button for 5 seconds Observe the wireless icon which should flash quickly , then press again for a slow flash In the app, select your home WiFi network and enter the password If the connection fails: Check your internet connection (the operational frequency is 2.4 GHz) Restart the app and your phone Completely turn off the device, then turn it back on and restart the setup If network auto-detection does not work, use manual network entry in the app Once connected, you will be able to control cooling, heating, dehumidification, and fan modes from your phone (temperature 16-31°C, timer programming up to 24 hours).

Q: Where is the water level sensor located on the BEKO BP112HB air conditioner?

The water level sensor of the BEKO BP112HB air conditioner is generally located inside the water collection tank. To locate it, follow these steps: Turn off and unplug the device to ensure your safety. Remove the water collection tank from the unit. Inspect the inside of the tank : the sensor is a small device or electrical contact attached inside the tank housing. This sensor detects the accumulated water level to prevent overflow. If you cannot find it easily, make sure the tank is completely removed and carefully examine its internal walls.

Q: Why does the dehumidifier indicator keep flashing constantly while the tank is empty on the BEKO BP112HB air conditioner?

If the dehumidifier indicator keeps flashing despite an empty tank on your BEKO BP112HB air conditioner, it may indicate a malfunction related to the water level sensor or the drainage system. Here are some steps to diagnose and resolve this issue: 1. Checking the water level sensor Ensure that the sensor is neither blocked nor damaged. Gently clean the sensor to remove dust or debris that may interfere with detection. 2. Cleaning the tank and its location Remove the tank and clean it thoroughly. Check that the tank's location is clean and free of debris. 3. Checking the drainage system If your model is equipped with a continuous drainage system, inspect the drainage hose for any blockages. Ensure that the hose is properly installed and not kinked. 4. Restarting the device Turn off the air conditioner and unplug it from the electrical outlet for a few minutes. Plug the device back in and turn it on to see if the problem persists. If after these checks the indicator continues to flash, it is possible that an internal component requires technical intervention. In this case, it is recommended to contact a specialized after-sales service.

Models BEKO Air-conditioner most viewed

User manual BEKO Air-conditioner : user manuals and guides in PDF

Models BEKO Air-conditioner most viewed

Other categories BEKO

Recent questions about Air-conditioner BEKO