Q: How to perform the oil change on the Husqvarna TE 310?

Required engine oil: The Husqvarna TE 310 uses AGIP RACING 4T 10W-60 oil for the engine, gearbox, and primary transmission. This oil is specifically formulated for high-performance 4-stroke engines. Oil quantities needed: You will need 1.7 liters for a complete oil change with filter replacement, or 1.5 liters for an engine-only oil change without replacing the screen filters. Preparation: Perform this operation with the engine warm to ensure optimal oil drainage. Place the catch pan under the engine before starting. Although not mandatory, it is recommended to remove the engine cover (A) to facilitate access to the filters. Remove the filler cap (2) Remove the drain plug (3) and let the oil drain completely Clean the magnet on the drain plug Remove the three screen filters (5), (6), (7) located on the left side of the engine Check the O-rings of the filters and clean them with gasoline To replace the filter cartridge (4), unscrew the three fixing screws and remove the cover Reinstall the drain plug (3) and the engine cover (A) Fill with the appropriate amount of AGIP RACING 4T 10W-60 oil Warning: Never touch hot engine oil to avoid serious burns. Reassemble the parts in the reverse order of disassembly to ensure a proper seal.

Q: Where can I find the technical manual for the HUSQVARNA WR 125 off-road motorcycle?

For the HUSQVARNA WR 125 , the official technical manual is mainly available from specialized French distributors. The ETAI technical manual covers all WR 125 models and includes all mechanical systems, adjustment procedures, and maintenance essentials for the upkeep and repair of your off-road motocross. You can obtain the technical manual through several channels: via specialized motorcycle documentation websites (revue-technique-auto.fr, wemoto.fr), from authorized HUSQVARNA dealers and workshops, or from HUSQVARNA spare parts distributors like Dubost HVA, which also offer microfiche and exploded views for the WR 125. Some workshops also provide workshop manuals in CD-ROM format that include the complete electrical diagram, torque specifications, and precise settings for the 2-stroke engine. Before purchasing a technical manual, make sure to check the manufacturing year of your HUSQVARNA WR 125, as the models cover different generations (for example, 1980-1983, 2008, etc.). For common repairs, you can also refer to the maintenance manual provided with the motorcycle or find it at your authorized HUSQVARNA dealer, who can guide you to the most suitable technical manual for your specific year and version.

Question 1

What engine oil to use for a HUSQVARNA SMR 450 R?

Accepted Answer

Your HUSQVARNA SMR 450 R exclusively uses AGIP RACING 4T oil with a viscosity of 10W-60. This synthetic oil is specially formulated for high-performance 4-stroke competition motocross engines and ensures optimal protection for the 449 cm³ single-cylinder engine.

Filling capacities during oil change:

With filter change: 1.7 liters
Without filter change: 1.5 liters

The HUSQVARNA SMR 450 R operates with a dry sump lubrication system equipped with two lobe pumps. The oil ensures simultaneous lubrication of the engine, gearbox, and primary transmission, which requires a very high-performance oil that remains stable at high temperatures.

Oil change procedure: Perform the oil change when the engine is hot for complete drainage. Unscrew the drain plug located under the engine and let the oil drain completely. Clean the magnet on the drain plug before screwing it back in. If you are changing the cartridge filter, take the opportunity to replace it with an original Husqvarna filter. Screw all components back in place (engine guard, right cover).

Maintenance schedule: After the initial break-in (2 hours) and after each competition, perform a complete oil change. For regular sporting use, adhere to the maintenance intervals specified in the maintenance booklet provided with your motorcycle. Use only AGIP RACING 4T, as any substitution with another brand or viscosity may compromise engine performance and the sealing of the dry sump system.

Question 2

What are the maintenance and inspection intervals for the Husqvarna SMR 510, particularly at 10,000 km?

Accepted Answer

The Husqvarna SMR 510 requires regular maintenance to maintain its performance. Although the manual does not detail a complete schedule with fixed milestones at 10,000 km, here are the key maintenance points documented:

Engine Maintenance

Oil Change: Use AGIP RACING 4T oil (10W-60). Capacity: approximately 1.7 liters (including the filter during the change).
Initial Break-in: First half hour at low speed without harsh accelerations, then gradually increase. Perform an oil change after this first half hour.

Important Adjustments

Valve Clearance: Intake: 0.10 to 0.15 mm - Exhaust: 0.15 to 0.20 mm

Routine Maintenance

Regular cleaning of the motorcycle
Chain lubrication
Air filter check
Check engine oil and coolant levels
Inspection of brake pads and fastening elements

For a detailed maintenance schedule and specific intervals (especially around 10,000 km), refer to the complete owner's manual, which will provide the manufacturer's specific recommendations based on the type of use (road, competition, leisure).

Question 3

What is the torque for the wheels and axles of the Husqvarna SMR 510?

Accepted Answer

Torque specifications for the wheels and axles of the Husqvarna SMR 510:

Front axle (wheel pivot fixing screw): 51.45 Nm (5.25 kgm / 38 ft-lb) - Thread M10x1.5
Rear axle (wheel pivot fixing nut): 142.1 Nm (14.5 kgm / 104.8 ft-lb) - Thread M20x1.5

When reassembling the rear axle, make sure to apply the thread locking product LOCTITE 243 according to the specifications in the manual.

Strictly adhere to these torque specifications when mounting or dismounting your wheels. Insufficient torque can lead to poor fastening and vibrations, while excessive torque can damage the threads, bolts, or pivots. Use a certified torque wrench for accurate measurement.

These values are essential for the safety and handling of your motorcycle. If you do not have a precise measuring tool, consult an authorized Husqvarna workshop for this work.

Question 4

How to perform the oil change on the Husqvarna TE 310?

Accepted Answer

Required engine oil: The Husqvarna TE 310 uses AGIP RACING 4T 10W-60 oil for the engine, gearbox, and primary transmission. This oil is specifically formulated for high-performance 4-stroke engines.

Oil quantities needed: You will need 1.7 liters for a complete oil change with filter replacement, or 1.5 liters for an engine-only oil change without replacing the screen filters.

Preparation: Perform this operation with the engine warm to ensure optimal oil drainage. Place the catch pan under the engine before starting. Although not mandatory, it is recommended to remove the engine cover (A) to facilitate access to the filters.

Remove the filler cap (2)
Remove the drain plug (3) and let the oil drain completely
Clean the magnet on the drain plug
Remove the three screen filters (5), (6), (7) located on the left side of the engine
Check the O-rings of the filters and clean them with gasoline
To replace the filter cartridge (4), unscrew the three fixing screws and remove the cover
Reinstall the drain plug (3) and the engine cover (A)
Fill with the appropriate amount of AGIP RACING 4T 10W-60 oil

Warning: Never touch hot engine oil to avoid serious burns. Reassemble the parts in the reverse order of disassembly to ensure a proper seal.

Question 5

How to use and check the turn signals on a Husqvarna SMR 510 motorcycle?

Accepted Answer

The turn signals are an essential element for safety when riding your Husqvarna SMR 510 motorcycle. Here’s how to use them and check their proper functioning:

Using the turn signals

Locating the switch: On the Husqvarna SMR 510, the turn signal switch is usually located on the left handlebar, identifiable by an arrow icon.
Activation: To signal a change of direction, push the switch up to activate the right turn signal, or down for the left turn signal.
Deactivation: After a turn, the turn signals may turn off automatically. If not, manually deactivate them by returning the switch to the center position.

Checking and maintenance

Visual check: Before each ride, check that the turn signals light up correctly when you operate the switch.
Flashing signal: A turn signal that flashes faster than the other may indicate a burnt bulb or an electrical problem.
Replacing bulbs: If a bulb is defective, replace it promptly to ensure your visibility and safety.

By following these tips, you ensure optimal use of the turn signals on your Husqvarna SMR 510, thus contributing to your safety on the road.

Question 6

Where can I find the technical manual for the HUSQVARNA WR 125 off-road motorcycle?

Accepted Answer

For the HUSQVARNA WR 125, the official technical manual is mainly available from specialized French distributors. The ETAI technical manual covers all WR 125 models and includes all mechanical systems, adjustment procedures, and maintenance essentials for the upkeep and repair of your off-road motocross.

You can obtain the technical manual through several channels: via specialized motorcycle documentation websites (revue-technique-auto.fr, wemoto.fr), from authorized HUSQVARNA dealers and workshops, or from HUSQVARNA spare parts distributors like Dubost HVA, which also offer microfiche and exploded views for the WR 125. Some workshops also provide workshop manuals in CD-ROM format that include the complete electrical diagram, torque specifications, and precise settings for the 2-stroke engine.

Before purchasing a technical manual, make sure to check the manufacturing year of your HUSQVARNA WR 125, as the models cover different generations (for example, 1980-1983, 2008, etc.). For common repairs, you can also refer to the maintenance manual provided with the motorcycle or find it at your authorized HUSQVARNA dealer, who can guide you to the most suitable technical manual for your specific year and version.

Question 7

What is the recommended torque for the rear wheel of the HUSQVARNA WR 125 motorcycle?

Accepted Answer

For the HUSQVARNA WR 125 off-road motorcycle, the recommended torque for the rear wheel is generally 100 Nm.

Here are some tips for properly tightening the rear wheel:

Use a torque wrench to ensure precise tightening.
Tighten the nut gradually, crossing the tightening points if applicable.
Check that the wheel is properly centered before fully tightening.
After the first use, it is advisable to recheck the torque to ensure it has not moved.

Adhering to this torque is essential for ensuring the safety and proper functioning of the motorcycle.

User manual HUSQVARNA Motorcycle : user manuals and guides in PDF

Models HUSQVARNA Motorcycle most viewed

Other categories HUSQVARNA

Recent questions about Motorcycle HUSQVARNA