HT 75 - Curling iron BEURER - Free user manual and instructions

USER MANUAL HT 75 BEURER

Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are present Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address

1 automatic curling tongs

1 copy of these instructions for use 1 Included in delivery 11 2 Signs and symbols 12 3 Warnings and safety notes 13 4 Device description 14 5 Usage 14 6 Cleaning and maintenance 15 7 Disposal 15 8 Technical specifications 15 9 Warranty 16 ENGLISH Table of contents12

2. SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device: DANGER Indicates an imminent danger If it is not avoided, it will result in death or serious injury WARNING Indicates a potentially impending danger If it is not avoided, there is a risk of death or serious injury CAUTION Indicates a potentially impending danger If it is not avoided, slight or minor injuries may result NOTICE Indicates a potentially harmful situation If it is not avoided, the system or something in its vicinity may be damaged Danger This device must not be used near water or in water (eg in a wash basin, or in the shower or bath) – risk of electric shock!

Marking to identify the packaging material A = material abbreviation, B = material number: 1–7 = plastics, 20–22 = paper and cardboard Read the instructions Product information Note on important information Disposal in accordance with the Waste Electrical and Electronic Equipment EC Directive (WEEE) CE labelling This product satisfies the requirements of the applicable European and national directives Do not dispose of batteries containing harmful substances with household waste Conformity assessed marking for the United Kingdom Manufacturer Importer symbol Separate the packaging elements and dispose of them in accordance with local regulations Separate the product and packaging elements and dispose of them in accordance with local regulations The products demonstrably meet the requirements of the Technical Regulations of the EAEU Protection class II device The device is double-insulated and, therefore, meets protection class 213

The device must only be used for the purpose for which it was designed and in the manner specified in these instructions for use

This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills, or a lack of experience and/or knowledge, provided that they are supervised or have been instructed on how to use the device safely, and have understood the risks involved

Children must not play with the device

Danger of suocation! Keep packaging materials away from children

Cleaning and user maintenance must not be performed by children unless supervised DANGER

Do not use this device near bathtubs, shower trays or other containers which have water in them

Risk of electric shock! Never submerge the device in water or other liquids! If the device falls into water, do not reach into the water! First switch o the fuse at the fuse box and then pull the mains plug out of the socket

If using the curling tongs in the bathroom, unplug them after use – this is because proximity to water constitutes a danger even when the curling tongs are switched o

As an additional safety measure, the installation in the bathroom circuit of a residual current device (FI/RCD) with a rated tripping current not exceeding 30 mA is recommended Ask your installer for advice WARNING

This device is not designed for use in commercial areas

If the mains connection cable of this device is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualified person to avoid any risk Do not use the device if it is damaged or not functioning correctly

around the curling tongs!

during use as it will become very hot14

Risk of fire! Place the device on a non-flammable surface only

Risk of fire! The device must not be covered

Risk of fire! Do not use the device on artificial hair

Risk of burns and fire! The device can become very hot When the device is hot, it must only be held using the handle

The associated drawings are shown on page 3

Preparing for use 1 Fully dry your hair before using the curling tongs 2 Make sure that your hair is clean and free from styling products This does not apply to products which protect the hair against heat 3 Comb your hair with a large-toothed comb to get rid of any tangles 4 Stand on a dry, non-conductive surface Dry your hands thoroughly Starting use

To switch on the curling tongs, press and hold the ON/OFF button

for two seconds The curling tongs show the currently set temperature setting in the temperature display

The ion outlet gently emits the ions

to select your desired temperature setting (170°C, 190°C or 210°C) The selected temperature setting flashes in the temperature display

As soon as the curling tongs have reached the selected temperature, the temperature display

lights up permanently The curling tongs are now ready for use We suggest the following temperature settings for your hair type: Temperature setting Hair type 170 °C Fine, brittle, coloured or bleached hair 190 °C Normal hair 210 °C Thick and resistant hair 3 Separate your hair into individual sections with a width of approx two centimetres Hold the sections taut at the tips 4 Carefully guide the sections as shown (see drawing

on the fold-out page) into the slot between the two heating rods

Make sure that the temperature display

is facing you Make sure that you leave enough space between your hand and the heating rods

until the hair section is completely wound up (see drawing

on fold-out page) After 12 seconds, an acoustic signal sounds and the curl is now ready After the acoustic signal, pull the curling tongs downwards and o 6 Repeat the process with another section of hair After use

Switch o the curling tongs after each use or interruption To switch o the curling tongs, press and hold the ON/OFF button

for two seconds The temperature display

goes out 2 Pull the mains plug out of the socket

Place the curling tongs on a stable, horizontal and non-flammable surface to cool down Make sure that the heating rod

does not touch the surface 4 Wait until the heating rod

has cooled down completely Then store the curling tongs in a dry place out of the reach of children

Risk of electric shock! Always unplug the mains plug from the socket before cleaning Make sure that no water gets inside the device!

Risk of fire! Never clean the curling tongs with highly flammable liquids! If the curling tongs are dirty, clean them with a slightly damp cloth If they are very dirty, you can also moisten the cloth with a mild soapy solution Do not use the curling tongs until they are completely dry

For environmental reasons, do not dispose of the device in household waste at the end of its service life Dispose of the device at a suitable local collection or recycling point in your country Observe the local regulations for material disposal Dispose of the device in accordance with EC Directive Waste Electrical and Electronic Equipment (WEEE) If you have any questions, please contact the local authorities responsible for waste disposal You can obtain the location of collection points for old devices from the local or municipal authorities, local waste disposal companies or your retailer, for example

8. TECHNICAL SPECIFICATIONS

Weight: Approx 420 g Voltage supply: 100-240 V ~ 50/60 Hz Power consumption: 45 W Protection class: II Ambient conditions: Only approved for indoor use Permissible temperature range: -10°C to +40°C Subject to technical changes The CE mark has been applied in accordance with the following European directives: EMC 2014/30/EU LVD 2014/35/EU The Declaration of Conformity for this product can be found at the following address: https://www.beurer.com/web/we-landingpages/de/cedeclarationofconformity.php16