ESLV6Q - Shaver PANASONIC - Free user manual and instructions

Product type	Rechargeable shaver
Brand	Panasonic
Model	ES-LV6Q
Power supply	AC adapter (RE7-87), automatic voltage conversion
Motor voltage	3.6 V DC
Charging time	Approximately 1 hour
Battery life	Approximately 2 weeks (3 minutes shaving per day)
Noise (shaving)	64 dB(A) (ref. 1 pW)
Noise (trimmer)	68 dB(A) (ref. 1 pW)
Use	Dry or wet shaving, usable in the shower
Functions	Beard sensor, intelligent lock, sonic vibration cleaning mode, precision trimmer
Battery type	Built-in rechargeable lithium-ion
Maintenance	Water cleaning, lubrication with supplied oil
Replacement parts (outer foil)	WES9177
Replacement parts (inner blades)	WES9170
Replacement parts (foil and blades set)	WES9036
Recommended charging temperature	10 °C to 35 °C
Minimum operating temperature	5 °C
Warranty	Included (warranty card provided)
Included accessories	Travel case, cleaning brush, oil, instruction manual

Frequently Asked Questions - ESLV6Q PANASONIC

How to charge the shaver?

Insert the appliance plug into the shaver, connect the AC adapter to a mains outlet. The charge status indicator lights up. Charging takes about 1 hour. You cannot use the shaver while charging.

Can I use the shaver in the shower?

Yes, this shaver is waterproof and can be used in the shower or cleaned with water. Make sure to disconnect the AC adapter before cleaning.

How to clean the shaver?

After use, turn off the appliance and disconnect the adapter. Clean the outer foil with soapy water, activate sonic vibration cleaning mode (press the on/off button for >2 seconds), remove the foil section and rinse under running water. Dry completely before lubricating.

What is the supplied oil for?

The oil (composed of liquid paraffin) lubricates the blades to ensure smooth movement and comfortable shaving. Apply one drop to each system foil and to the precision trimmer after cleaning.

When to replace the outer foil and inner blades?

An indicator appears after about 1 year (based on 3 min/day). Replace the outer foil every year and the inner blades every two years. References: foil WES9177, blades WES9170, set WES9036.

The shaver does not start, what to do?

Check the intelligent lock: place the shaver on a surface then pick it up to unlock. If still locked, press and hold the on/off button for more than 2 seconds to force unlock. Make sure the battery is charged.

Does the battery degrade if not used for a long time?

Yes, if the shaver is unused for more than 6 months, the battery may deteriorate. Fully charge the appliance at least once every 6 months to maintain its performance.

Can I charge the shaver after each use?

Yes, the lithium-ion battery is not affected by frequent charging. You can charge after each use without issue.

What to do if the beard sensor does not respond?

The sensor may not react depending on beard thickness, amount of hair in the head, type of shaving gel, or if the battery level is low. Apply oil to the blades or recharge the shaver. This is not a malfunction.

Does the shaver heat up normally?

Slight heat is normal. If the outer foil heats up excessively, apply oil or replace the foil if it is damaged or deformed.

USER MANUAL ESLV6Q PANASONIC

Operating Instructions

(Household) Rechargeable Shaver

Model No. ES-LV6Q

C E

GB English.5 DK Dansk...115 Cz Cesky 221
D Deutsch 23 P Portugues.133 SK Slovensky.239
Français. 43 N Norsk. 151 Magyar. 257
Italiano 61 S Svenska 169 RO Romana 275
NL Netherlands.....79 FIN Suomi....187 TR Turkce. 293
Espanol. 97 Polski 203

D

E

G

4

ES-LV6Q_EU.indb 4 2017/12/22 10:34:31

Panasonic

Operating Instructions

(Household) Rechargeable Shaver

Model No. ES-LV6Q

Contents

Safety precautions. 8 FAQ. 17

Intended use 11 Troubleshooting 18

Parts identification. 12 Service. 20

Preparation. 12 For environmental protection and

How to use 13 recycling of materials. 21

Cleaning the shaver 15 Specifications 22

Replacing the system outer foil and the inner blades. 17

Thank you for purchasing this Panasonic product.

Before operating this unit, please read these instructions completely and save them for future use.

Warning

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• The supply cord cannot be replaced. If the cord is damaged, the AC adaptor should be scrapped.

• This WET/DRY shaver can be used for wet shaving using shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean with water. The following symbol means suitable for use in a bath or shower.

• Do not use anything other than the supplied AC adaptor for any purpose. Also, do not use any other product with the supplied AC adaptor. (See page 12.)
• The following symbol indicates that a specific detachable power supply unit is required for connecting the electrical appliance to the supply mains. The type reference of power supply unit is marked near the symbol.

7

Safety precautions

To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.

Explanation of symbols

The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.

DANGER

Denotes a potential hazard that will result in serious injury or death.

WARNING

Denotes a potential hazard that could result in serious injury or death.

CAUTION

Denotes a hazard that could result in minor injury or property damage.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users to a specific operating procedure that must not be performed.

This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.

WARNING

This product

This shaver has a built-in rechargeable battery. Do not throw into fire, apply heat, or charge, use, or leave in a high temperature environment.

• Doing so may cause overheating, ignition, or explosion.

Do not modify or repair.
- Doing so may cause fire, electric shock, or injury. Contact an authorized service centre for repair (battery change etc).
Never disassemble except when disposing of the product. - Doing so may cause fire, electric shock, or injury.

In case of an abnormality or malfunction Immediately stop using and remove the adaptor if there is an abnormality or malfunction.

-Failure to do so may cause fire, electric shock, or injury. Abnormality or malfunction cases>

The main unit, adaptor or cord is deformed or abnormally hot.
The main unit, adaptor or cord smells of burning.
- There is an abnormal sound during use or charging of the main unit, adaptor or cord.
- Immediately request inspection or repair at an authorized service centre.

Power supply

Do not connect or disconnect the adaptor to a household outlet with a wet hand.
- Doing so may cause electric shock or injury.

WARNING

Do not immerse the AC adaptor in water or wash with water.

Do not place the AC adaptor over or near water filled sink or bathtub.

Never use the appliance if the AC adaptor is damaged or if the power plug fits loosely in a household outlet.

Do not damage, modify, or forcibly bend, pull, or twist the cord. Also, do not place anything heavy on or pinch the cord.

• Doing so may cause electric shock or fire due to a short circuit.

Do not use in a way exceeding the rating of the household outlet or the wiring.
- Exceeding the rating by connecting too many plugs to one household outlet may cause fire due to overheating.

Always ensure the appliance is operated on an electric power source matched to the rated voltage
indicated on the AC adaptor. Fully insert the adaptor.
- Failure to do so may cause fire or electric shock.

Disconnect the AC adaptor when cleaning the shaver with water.
- Failure to do so may cause electric shock or injury.

Regularly clean the power plug and the appliance plug to prevent dust from accumulating.
- Failure to do so may cause fire due to insulation failure caused by humidity.

Preventing accidents

Do not place within reach of children or infants. Do not let them use it.
- Putting parts or accessories in the mouth may cause an accident or injury.

If oil is consumed accidentally, do not induce vomiting, drink a large amount of water and contact a physician.

If oil comes into contact with eyes, wash immediately and thoroughly with running water and contact a physician.

Failure to follow these instructions may result in physical problems.

CAUTION

Protecting the skin

Do not use excessive pressure to apply the system outer foil to your lip or other part of your face.
Do not apply the system outer foil directly to blemishes or injured skin.

Do not touch the blade section (metallic section) of the inner blade.

• Doing so may cause injury to skin or hand.

Do not forcefully press the system outer foil. Also, do not touch the system outer foil with fingers or nails when in use.
Do not use this product for hair on head or any other part of the body.
- Doing so may cause injury to skin or reduce the life of the system outer foil.

CAUTION

Check the system outer foil for cracks or deformations before use.

• Failure to do so may cause injury to the skin.

Be sure to place the protective cap on the shaver when carrying around or storing.

• Failure to do so may cause injury to skin or reduce the life of the system outer foil.

Note the following precautions

Do not wrap the cord around the adaptor when storing.

• Doing so may cause the wire in the cord to break with

the load, and may cause fire due to a short circuit.

Do not allow metal objects or trash to adhere to the power plug or the appliance plug.

• Doing so may cause electric shock or fire due to a short circuit.

Do not disconnect the adaptor or the appliance plug by holding onto the cord.

• Doing so may cause electric shock or injury.

Do not share your shaver with your family or other people.

• Doing so may result in infection or inflammation.

Do not drop or hit against other objects.

• Doing so may cause injury.

Disconnect the adaptor from the household outlet when not charging.

• Failure to do so may cause electric shock or fire due to electrical leakage resulting from insulation deterioration

Handling of the removed battery when disposing

DANGER

• The rechargeable battery is exclusively for use with this appliance. Do not use the battery with other products.

• Do not charge the battery after it has been removed from the product.

• Do not throw into fire or apply heat.

• Do not hit, disassemble, modify, or puncture with a nail.

• Do not let the positive and negative terminals of the battery get in contact with each other through metallic objects.

• Do not carry or store the battery together with metallic jewellery such as necklaces and hairpins.

• Do not use or leave the battery where it will be exposed to high temperatures, such as under direct sunlight or near other sources of heat.

• Never peel off the tube.

• Doing so may cause overheating, ignition, or explosion.

WARNING

After removing the rechargeable battery, do not keep it within reach of children and infants.

• The battery will harm the body if accidentally swallowed.

If this happens, consult a physician immediately.

If the battery fluid leaks out and comes in contact with the eyes, do not rub the eyes, and thoroughly rinse with clean water, such as tap water.

• Failure to do so may cause eye injury. Consult a physician immediately.

CAUTION

If the battery fluid leaks out and comes in contact with the skin or clothes, rinse off with clean water, such as tap water.

• Failure to do so may cause inflammation.

Intended use

• Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.
• Do not bring the system outer foil into contact with hard objects.
  Doing so may damage the blades as they are very thin and deform easily.
• Do not dry the main unit with a dryer or a fan heater.
  Doing so may cause malfunction or deformation of the parts.
• Do not leave the shaver exposed to direct sunlight with the foil frame detached.
  Doing so may deteriorate the waterproof rubber and degrade waterproof function, which may cause to malfunction.
• Store the shaver in a place with low humidity after use.
  Failure to do so may cause malfunction due to condensation or rust.
• Keep both the inner blades inserted. If only one of the inner blades is inserted, the shaver may be damaged.
• If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time.

Parts identification

A Main body

① Protective cap
② System outer foil
③ Foil frame
④ Smooth rollers They help to glide the skin more eas
⑤ Foill frame release buttons
⑥ Power switch
⑦ Lamp display a. Used time
b. Battery capacity I
c. Shaving sensor lamp (4)
d. Clean lamp (F)
e. Switch lock lamp ( h
f. Foil/blade check lamp (
g. Charge status lamp (
⑧ Appliance socket
⑨ Outerfoil section
System outer foil release buttons
① Inner blades
(2)Trimmer
⑬Trimmer handle

AC adaptor (RE7-87)

Adaptor
⑤ Power plug
16 Cord
⑦ Appliance plug

Accessories

Travel case
Cleaning brush
Oil
F Operating Instructions
Guarantee Card

Preparation

Charging the shaver

• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.

1 Insert the appliance plug [67] into the shaver.

2 Plug the adaptor [B] into a household outlet.

• Check that the charge status lamp () is glowing.
• Charging is completed after

approx. 1 hour.

3 Disconnect the adaptor after charging is completed.

Note

You cannot operate the shaver while charging.

While charging After charging is completed

glows.

The number of the battery capacity lamp will increase as charging progresses.

All the battery capacity lamp and will glow and then turn off after 5 seconds.

Notes

• When charging the shaver for the first time or when it has not been in use for more than 6 months, the charging time may change or the charge status lamp () may not glow for a few minutes. It will eventually glow if kept connected.

• Recommended ambient temperature for charging is 10^ - 35^ . It may take longer to charge, or the charge status lamp () will blink quickly and the battery may fail to charge properly in extremely high or low temperatures.
  The shaver can be used for approximately 2 weeks with a full charge.

(Based on one 3-minute dry-shave usages per day in an ambient temperature range of 20^ - 30^ .)

The number of usable days varies depending on the following conditions.

• Beard thickness
• Pressure applied to the skin
• Usage frequency of the sonic vibration cleaning mode
• If there is noise from the radio or other sources while using or charging the appliance, move to a different location to use the appliance.

How to use

This appliance has a smart lock function, so the power switch is automatically locked to prevent accidental operation when not shaving.

Unlocking the power switch

The lamps illuminate upwards and the power switch is automatically unlocked when the main body is grasped.

The remaining battery capacity will be shown and then turn off after approximately 1 second.

Locking the power switch

The lamps illuminate downwards and the power switch is automatically locked 1 minute after releasing the main body.
The switch lock lamp will light up for 5 seconds and turn off.
- The sensor may respond and the power switch may be unlocked when an electrical device or metal object is brought closer. This is not abnormal.

Shaving beard

1 Press and shave.

• The "shaving sensor", which automatically adjusts the power depending on the beard thickness, will operate.

It will shave with high power on areas where the beard is heavy, and reduce the power on areas where the beard is thin, to reduce burden on the skin.

Tips for better shaving

Apply the whole system outer foil perpendicularly against the skin and shave by slowly gliding the shaver over the face against the grain of the beard.

• The beard under the chin and around the throat can be shaved better by stretching the skin so the beard will stand.
• To prevent damaging the system outer foil, do not shave with only a part of the system outer foil.

2 Press when finished.

While using After use
m = 311

The used time and remaining battery capacity are shown and then turn off after 7 seconds.

The shown time returns to [0'00"] after 10 minutes.
The shaving sensor lamp
(+) blinks.

The used time and remaining battery capacity blink alternately and then turn off after 8 seconds.

When the battery capacity is low

10% appears and blinks.
The appliance beeps twice after switched off.
- You can shave 1 to 2 times after "10%" appears. (This will differ depending on usage.)

Notes

The appliance may not operate in an ambient temperature lower than approximately 5^
- The shaving sensor may not respond depending on the type and quantity of the shaving gel. This is not abnormal.
- Depending on the beard thickness or the amount of beard trimmings in the shaver head, the shaving sensor may not react and the driving sound may not change. This is not abnormal.
- To prevent erroneous operation, place your fingers on the finger rest while using the shaver.

• The sonic vibration cleaning mode is activated when the power switch is pressed for more than 2 seconds while the shaver is not operating. (See this page.) You cannot shave in this mode.

Switching the shaver head

You can change the pivot action.

FREE

The shaver head is moved to prevent missed spots.

LOCK

You can lock the shaver head.

Using the trimmer

1. Slide the trimmer handle up to the "mm" position so that the trimmer stands upright.
2. Press and use.

Press and hold the top knob (a) and slide the trimmer handle down to lower the trimmer.

Tips for better usage

Apply the trimmer edge perpendicular to skin gently and move downward slowly.

Trimming sideburns Pre-shave of long beards

Cleaning the shaver

We recommend cleaning the shaver after each use.

Cleaning with water

• Turn the shaver off and disconnect the AC adaptor.

1 Apply some hand soap and some water to the system outer foil.

2 Press for more than 2 seconds to activate the sonic vibration cleaning mode.

• Splashing of foam is suppres
  The battery capacity lamps blink in order.
  After about 20 seconds, it will be automatically turned off, or you can turn it off by pressing the power switch.

3 Remove the outer foil section and clean with running water.

See page 17 for attaching and removing the outer foil section.
- Splashing is reduced by rinsing the shaver in sonic vibration cleaning mode.
- After rinsing with water, shake the shaver up and down for a few times to remove excess moisture and then wipe off any drops of water with a dry cloth.

4 Dry the outer foil section, the shaver, and the trimmer

[A12]completely.

• Allow the shaver to dry in the shade, avoid direct sunlight.

5 Lubricate the shaver.

It will keep the movement of the blade smooth and maintain a comfort shave.

1. Apply one drop of oil to each of the system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately five seconds.
4. Switch off the shaver, and wipe off any excess oil from the system outer foil with a soft cloth.

Notes

• Be careful not to hit the main body on the sink or any other object while draining the water. Failure to do so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
  Doing so may cause malfunction, or cracking or discoloration of the parts.
  Wipe with diluted soapy water.

16

• Do not use any kitchen or bathroom detergents other than hand soap.

Doing so may cause malfunction.

Cleaning with the brush

Remove the outer foil section and the inner blades. (See page 17.)

Cleaning with the long brush

Clean the outer foil section [A8], system outer foil [A2], the shaver body [A] and the trimmer [A12] using the long brush.

Cleaning with the short brush

• Clean the inner blades [A] using the short brush by moving it in direction as illustrated.
• Do not move the short brush perpendicularly against the blades as it will damage the inner blades and affect their sharpness.

Replacing the system outer foil and the inner blades

appears on the lamp display once a year. (Based on one 3-minute shave use per day)

We recommend checking the system outer foil and the inner blades when it appears.

Press the power switch for more than 30 seconds to turn off Even if is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.

system outer foil once every year

inner blades once every two years

Removing the outer foil section

Press the foil frame release buttons [A5] and lift the outer foil section [A9] upwards.

Attaching the outer foil section

After turning the foil frame mark ( ) to the front, securely attach the outer foil section [A9] to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons [A10] and pull down the system outer foil [A2].

2. Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

1. Align the foil frame mark ( ) and the system outer foil mark ( △) and securely attach together until it clicks.

Replacing the inner blades

1. Remove the inner blades [A] one at a time.
2. Insert the inner blades one at a time.

Note

Do not throw away the foil frame.

FAQ

Question

Will the battery deteriorate if not used for an extended period of time?

Can I charge the shaver after every use?

Why should the adaptor be disconnected after charge?

What is the constituent of the dedicated oil?

Answer

The battery will deteriorate if not used for over 6 months, so make sure to perform a full charge at least once every 6 months.
The battery used is a lithium-ion, so charging after every use will have no effect on battery life.

Charging the battery for more than 1 hour will not affect battery performance, but disconnect the adaptor for safety and to save energy.
Constituent of the oil is liquid paraffin.

Question Answer

Why does the appliance beep twice after switched off?

The sound indicates that the battery capacity is running low. Please charge the appliance.

Troubleshooting

Perform the following actions. If the problems still cannot be solved, contact the store where you purchased the unit or a service centre authorized by Panasonic for repair.

Problem Action

The power switch does not turn ON.

The appliance may not unlock depending on usage conditions. Place the appliance on the desk, then pick it up again. If it still does not operate, press and hold the power switch for more than 2 seconds to forcibly unlock the appliance.

Problem Action

The shaving sensor does not respond.

Depending on the beard thickness or the amount of beard trimmings in the shaver head, the shaving sensor may not react and the driving sound may not change. This is not abnormal.
The shaving sensor may not respond depending on the type and quantity of the shaving gel. This is not abnormal.
The shaving sensor may not respond when the remaining battery capacity is low. If this happens, recharge the shaver.
Apply oil. (See page 16.) The shaving sensor may not respond when there is not enough oil on the blades.

Problem Action
The shaving sensor responds even though the shaver is not in contact with the skin.	Clean the beard trimmings from the shaver. When the shaver is extremely dirty, remove the foil frame and wash with water. (See page 15.)
	Replace the system outer foil and/or inner blades. Expected life of system outer foil and inner blades: System outer foil: Approximately 1 year Inner blades: Approximately 2 years
Operating time is short even after charging.	Apply oil. This can be improved by cleaning every time after shaving. When the number of operations per charge starts to decrease, the battery is nearing the end of its life.

Problem Action
Use the appliance in an ambient temperature approximately 5 °C or higher.
The battery has reached the end of its life.
The shaver will not operate with the AC adaptor connected. Please use the shaver after it has been sufficiently charged and the AC adaptor disconnected.
The shaving sensor is operating. The sound changes depending on the beard thickness.
Apply oil. The blades will not move smoothly when there is no oil on the blades, requiring more power.
The shaver makes a high- pitched sound due to the linear motor drive. This does not indicate a problem.
Confirm that the blades are properly attached.
Clean the system outer foil with the brush.
This can be improved by cleaning every time after shaving.
Problem Action
Shavings fly out in all directions.	This can be improved by cleaning every time after shaving. Clean the inner blades with the brush when shavings are adhering to the inner blades.
System outer foil gets hot.	Apply oil. Replace the system outer foil if it is damaged or deformed. (See page 17.)
You do not get as close a shave as before.	This can be improved by cleaning every time after shaving. Replace the system outer foil and/or inner blades. Expected life of system outer foil and inner blades: System outer foil: Approximately 1 year Inner blades: Approximately 2 years
	Apply oil.

Service

Contact

Please visit Panasonic web site http://www.panasonic.com or contact an authorized service centre (you find its contact address in the pan european guarantee leaflet.) if you need information or if the shaver or the cord gets damaged.

Replacement parts

Replacement parts are available at your dealer or Service Centre.

Replacement parts for ES-LV6Q	System outer foil and inner blades	WES9036
	System outer foil WES9177
	Inner blades WES9170

Battery life

The life of the battery is 3 years. The battery in this shaver is not intended to be replaced by consumers. Have the battery replaced by an authorized service centre.

For environmental protection and recycling of materials

This shaver contains a Lithium-ion battery. Please make sure that the battery is disposed of at an officially assigned location, if there is one in your country.

Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and batteries, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol) This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

Disposal of the built-in rechargeable battery

Remove the built-in rechargeable battery before disposing of the shaver.

Please make sure that the battery is disposed of at an officially designated location if there is one.

This figure must only be used when disposing of the shaver, and must not be used to repair it. If you dismantle the shaver yourself, it will no longer be waterproof, which may cause it to malfunction.

• Remove the shaver from the AC adaptor.
• Press the power switch to turn on the power and then keep the power on until the battery is completely discharged.
• Perform steps① to ⑤ and lift the battery, and then remove it.
• Take care not to short circuit the positive and negative terminals of the removed battery, and insulate the terminals by applying tape to them.

Specifications

Power source	See the name plate on the AC adaptor. (Automatic voltage conversion)
Motor voltage	3.6 V---
Charging time Approx. 1 hour
Airborne	In shaving mode: 64 (dB (A) re 1 pW)
Acoustical Noise	In trimmer mode: 68 (dB (A) re 1 pW)

This product is intended for household use only.

Panasonic

Betriebsanleitung

Tag违法犯罪 or the use of a computer program to gain money or gain money from a person who has been convicted for a crime.

vises "10%, og" -blinker.

Trimming at bakkenbarter

m = 311

© Panasonic Corporation 2018

EN,GE,FR,IT,DU,SP,DA,PT,NW,SW,FI,PL,CZ,SK,HU,RO,TK

Printed in Japan

ES9700LV6Q1E Y0218-0