AD 7065 - Vacuum Cleaner ADLER - Free user manual and instructions

Product type	Canister vacuum cleaner
Brand	ADLER
Model	AD 7065
Dimensions (L x W x H)	30 x 30 x 50 cm
Weight	5 kg
Power consumption	800 W
Filter type	Cyclone filter and HEPA filter
Dust tank capacity	2 L
Operating radius	8 m
Cord length	5 m
Noise level	78 dB
Main functions	Vacuuming hard floors and carpets, parquet brush, crevice tool
Maintenance and cleaning	Empty the tank after each use, clean the HEPA filter every month
Safety	Automatic shut-off in case of overheating, automatic cord rewind
Spare parts and repairability	Filters, bags, brushes available under reference AD 7065
General information	2-year warranty, made in China

Frequently Asked Questions - AD 7065 ADLER

How to start the AD 7065 vacuum cleaner?

Plug in the appliance, then press the on/off button located on the vacuum cleaner body.

How to clean the HEPA filter?

Remove the filter, tap it gently to remove dust and rinse it with lukewarm water if necessary. Let it dry for 24 hours before putting it back.

How to change the dust bag?

Open the compartment, remove the full bag and insert a new AD 7065 compatible bag. Close the cover.

What to do if suction is weak?

Check that the tank is not full, the filter is not clogged and the hose is not blocked. Clean or replace the parts if necessary.

The red light is on, what does it mean?

The red light usually indicates a full bag or clogged filter. Empty the bag and clean the filter to turn off the light.

Can I vacuum liquids with this vacuum cleaner?

No, this vacuum cleaner is designed only for dry vacuuming. Never vacuum liquids to avoid damaging the appliance.

How to rewind the power cord?

Press the rewind button located at the back of the vacuum cleaner. The cord retracts automatically. Hold the plug to prevent it from whipping.

Where to buy spare parts for the AD 7065?

Filters, bags and brushes are available from ADLER authorized dealers or online under reference AD 7065.

What is the warranty period?

The AD 7065 vacuum cleaner is guaranteed for 2 years against any manufacturing defects. Keep the purchase receipt to claim the warranty.

How to store the vacuum cleaner?

Store the vacuum cleaner in a dry place, away from dust. Wind the cord and place the accessories in their holder.

USER MANUAL AD 7065 ADLER

AD 7065

EN	User Manual	3	FI	Käyttöohje	82
DE	Bedienungsanleitung	8	PL	Instrukcja obsługi	87
FR	Mode d'emploi	13	IT	Manuale d'uso	92
ES	Manual de usuario	19	SV	Bruksanvisning	98
PT	Manual de Instruções	24	BG	Ръководство за употреба	103
LT	Naudojimo instrukcija	29	DA	Brugsanvisning	108
LV	Lietošanas instrukcija	34	SK	Používatel'ská príručka	113
ET	Kasutusjuhend	39	BS	Korisnički priručnik	118
HU	Használati útmutató	44	MK	Упатство за употреба	123
RO	Manual de utilizare	50	HR	Korisnički priručnik	129
CS	Návod k použití	55	UK	Керівництво користувача	134
RU	Руководство пользователя	60	SR	Упутство за употребу	139
EL	Еүхειρίδιο χρήσης	65	AR	دليل المستخدم	145
NL	Gebruikershandleiding	71	AZ	İstifadəçi təlimatı	149
SL	Navodila za uporabo	77	SQ	Manuali i përdorimit	154

Picture I.

Picture II.

User Manual (EN)

GENERAL SAFETY CONDITIONS

IMPORTANT SAFETY INSTRUCTIONS FOR USE

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

1. Before using the device, read the instruction manual and follow the instructions contained therein. The manufacturer is not responsible for damage caused by using the device contrary to its intended use or improper operation.

2. The device is for domestic use only. Do not use for other purposes incompatible with its intended use.

1. 3. The device should be connected only to a 220-240V ~50-60 Hz grounded outlet.

4. In order to increase the safety of use, multiple electrical appliances should not be plugged into a single circuit at the same time.

5. Take special care when using the device when children are around. Do not allow children to play with the appliance; do not allow children or persons unfamiliar with the appliance to use it.

6. WARNING: This equipment may be used by children over 8 years of age and persons with limited physical, sensory or mental ability, or persons without experience or familiarity with the equipment, if it is under the supervision of a person responsible for their safety or they have been given instructions on the safe use of the equipment and are aware of the dangers associated with its use. Children should not play with the equipment. Cleaning and maintenance of the equipment should not be performed by children unless they are over 8 years of age and these activities are performed under supervision.

1. 7. Always after use, remove the plug from the power outlet by holding the outlet with your hand. DO NOT pull on the power cord.
2. Do not immerse the cable, plug, or the entire device in water or other liquids. Do not expose the unit to weather conditions (rain, sun, etc.) or use it in high humidity environments (bathrooms, humid motor homes).

Periodically check the condition of the power cord. If the power cord is damaged, it should be replaced by a specialized repair facility to avoid danger.

1. Do not use the device with a damaged power cord or if it has been dropped or damaged in any other way, or if it is not working properly. Do not repair the device yourself, as there is a risk of electric shock. Take the damaged device to a competent service center for inspection or repair. All repairs may be carried

out only by authorized service centers. Improper repair may cause serious danger to the user.

10) Do not use the device near flammable materials. 11) The power cord must not touch hot surfaces. 12) Do not leave the device or the power supply to the outlet unattended. 13) To provide additional protection, it is advisable to install in an electrical circuit a residual current device (RCD) with a rated residual current not exceeding 30 mA. In this regard, consult a specialist electrician. 14) Do not let the motor part of the device get wet. 15) Do not use the device outside the home; use it only indoors. 16) Do not use the vacuum cleaner to collect flammable substances (such as fuel, solvents). 17) Do not vacuum sharp-edged objects (such as glass shards). 18) Do not point the suction tube of the vacuum cleaner towards other people or animals. 19) Vacuum only dry surfaces. 20) Use only accessories designed for this device. 21) Take special care when vacuuming stairs; take care of your safety. 22) Do not block any ventilation holes. 23) Do not run the vacuum cleaner without the filter in place. 24) Do not pull the vacuum cleaner by the hose. 25) Be careful that the power cord is not cut by the door or stuck. Pay attention to the length of the power cord when moving the vacuum cleaner. Rapidly pulling the vacuum cleaner with the cable stretched taut can cause damage to the cable. 26) Do not vacuum dust and construction debris; the residue of such debris will immediately void the warranty. 27) Do not leave the device unattended during operation. 28) Always unplug the unit if left unattended, and before folding, unfolding, or cleaning. 29) Always turn off the device with the button before unplugging.

CAUTION:

1. The vacuum cleaner is designed for dry cleaning of rooms. 2) The vacuum cleaner is not designed to collect water or other liquids; do not use it to collect smoldering or burning cigarettes or ashes. 3) Do not use the vacuum cleaner to collect dust from plaster, concrete, flour, or ashes.
2. Remove sharp objects from the floor before cleaning to prevent damage to the hose.

If the suction power of the vacuum cleaner drops sharply during cleaning, immediately turn it off, unplug it from the outlet and check the telescopic tube (4) or flexible hose (7) for patency. Remove the obstruction, after which you can resume cleaning.

PRODUCT DESCRIPTION: AD7065 vacuum cleaner - see figure I.

1. floor/carpet brush
2. floor/carpet switch
3. telescopic tube button
4. telescopic extension tube
5. flexible hose holder
6. manual adjustment of suction power
7. flexible hose
8. flexible hose end
9. hose end locks
10. air inlet
11. Complete dust container.
12. carrying handle
13. dust container lock button
14. power cord retraction button
15. parking position hanger
16. power button
17. suction power knob
18. outlet filter cover
19. HEPA 13 filter
20. Lower dust container cover
21. Locking device of the lower dust container cover

22. Dust container housing

1. Dust container upper cover
2. Cyclone filter
3. Inlet filter

26 Sponge filter

1. Accessory holder

28 Crevice tool

1. Upholstery brush 2-in-1

30 Mini-turbo brush

1. Parquet brush

BEFORE FIRST USE

After transporting or storing the device in sub-zero temperatures, unpack it and wait at least 3 hours before using it.

USE OF ACCESSORIES:

- floor/carpet brush (1): When using the brush (1), set the switch (2) to the desired "FLOOR/carpet" position.

- crevice nozzle (28): Use the crevice nozzle (28) to clean radiators, crevices, spaces between couch cushions and the like.

- upholstery brush (29): It is designed to clean fabric surfaces of upholstered furniture and to collect dust from the surface of furniture, while the presence of fibers on the brush (29) prevents damage to the polished surface of furniture.

When working, put the brush on the cap (29).

- mini-turbo brush (30): It is designed for cleaning fabric surfaces in hard-to-reach corners, such as the interior of a car.

- parquet brush (31): It is designed for cleaning wooden surfaces.

VACUUM CLEANER ASSEMBLY

I. Inserting and removing the flexible hose (7).

Insert the end of the flexible hose (7) (8) into the air inlet (10) until the latches (9) snap into place. To remove the flexible hose (7), push in the latches (9) and disconnect the end (8) from the air inlet (10).

II. Attaching the telescopic tube (4) and accessories

Attach the telescopic extension tube (4) to the flexible hose holder (5). Extend the lower part of the tube (4) to the required length, after pressing the button (3). Select the necessary accessories:

- floor/carpet brush (1),

- crevice nozzle (28)

- 2-in-1 upholstery brush (29)

- mini-turbo brush (30)

- parquet brush (31)

and then attach it to the telescoping extension tube (4).

The crevice nozzle (28) and the 2-in-1 upholstery brush (29) can be attached to the flexible hose holder (5).

USING THE VACUUM CLEANER

1. The dust container (11) is equipped with a cyclone filter (24), which centrifuges debris and dust from the sucked air, while the inlet filter (25) and sponge filter (26) trap the finest dust particles.

NOTE: Make sure that the inlet filter (25) and sponge filter (26) are always clean, as the overall performance of the vacuum cleaner depends on this.

2) Before turning on and using the vacuum cleaner, make sure that the cyclone filter (24), filters (25, 26), dust container (11) and HEPA exhaust filter (19) are properly installed.

1. Remove the power plug and unroll the power cord to the required length, plug the power plug into the power outlet.
2. The yellow marking on the power cord indicates the maximum length of the cord. Do not extend the power cord

further than the red mark.

1. Press the power button (16) to turn on the vacuum cleaner.
2. While cleaning, you can adjust the suction power with the manual suction power regulator (6) on the flexible hose handle (5) or by turning the suction power adjustment knob (17).
3. When you have finished cleaning, turn off the vacuum cleaner by pressing the power button (16) and unplug it. 8) To retract the power cord, press the button (14); hold the cord with your hand while retracting it.
4. If you need to take a break during cleaning, turn off the vacuum cleaner by pressing the power button (16) and attach the brush (1) to the parking position hanger (15).

NOTE: Before changing accessories or cleaning the dust container (11), turn off the vacuum cleaner by pressing the power button (16) and unplug it.

CLEANING AND MAINTENANCE

I. Cleaning the dust container (11):

a) It is recommended to remove debris and dust from the dust container (11) after each cleaning of the room. b) Turn off the vacuum cleaner by pressing the power button (16) again and unplug it. c) Hold the dust container handle, press the lock (13) and remove the entire dust container (11) (Fig. II.1). d) Place the entire dust container (11) over the dust garbage can. e) Press the clamp (21), and then the lower cover (20) will drop down, releasing dust and fine debris (Fig. II.2). f) Remove accumulated dust and debris from the dust container (11), if it still does not fall into the dust garbage can. g) Close the lower cover (20). h) Install the entire dust bin (11) back in place and make sure the dust bin (11) is properly fastened.

II. Cleaning the filters (24), (25), (26).

NOTE! Make sure that the cyclone filter (24), filters (25, 26) and dust container housing (22) are COMPLETELY dry before assembling and reinstalling the entire dust container (11) in its place.

The cyclone filter (24) and filters (25, 26) are installed in the dust bin (11). Preliminarily remove dust and debris from the dust container (11) as described above.

a) Turn the cover (23) counterclockwise and remove it. Remove the sponge filter (26), take out the inlet filter (25) and cyclone filter (24). b) Clean the cyclone filter (24) of dust and debris. Wash the cyclone filter (24) under a stream of warm water and dry completely. c) Wash the inlet filter (25) and sponge filter (26) under a stream of warm water and dry. Dry the filters (25, 26) completely. d) Do not dry any filter with a hair dryer or similar device. Do not wash parts in a dishwasher. e) Wash the dust container housing (22), wipe it and dry it. f) Insert the cyclone filter (24) into the dust container housing (22). g) Insert the inlet filter (25) and sponge filter (26) into the cyclone filter (24). h) Replace the cover (23) and turn it clockwise as far as it will go. i) Install the completely assembled dust container (11) back into place, make sure that the entire dust container (11) is properly attached.

III. Cleaning the HEPA 13 exhaust filter (19).

Turn off the vacuum cleaner and remove the power cord plug from the power outlet.

a) Remove the outlet filter cover (18) by turning it clockwise and remove the HEPA outlet filter (19) (Fig. II.3). b) Wash the HEPA outlet filter (19) and cover (18) under a stream of lukewarm water. Do not wash the HEPA outlet filter (19) and cover (18) in the dishwasher. c) Dry the HEPA outlet filter (19) and cover (18). Do not dry the HEPA filter (19) with a hair dryer or similar device. d) Install the HEPA outlet filter (19) back into place. e) Put the cover (18) back in place, turning it counterclockwise until it stops.

IV. Vacuum cleaner housing

a) Clean the vacuum cleaner housing with a soft, slightly dampened cloth, then wipe dry. Be careful that no liquid gets into the vacuum cleaner body. b) Do not use solvents or abrasives to clean the vacuum cleaner body and accessories. c) Do not immerse the vacuum cleaner body, power cord, or plug in water or other liquids.

PROTECTION AGAINST OVERHEATING

1) If the electric motor overheats during operation, the overheat protection system will be activated and the device will shut down automatically. 2) In this case, press the power button (16) and unplug the device. 3) Wait 30-40 minutes for the vacuum cleaner to cool down and turn it on again. The cooling time may differ from the specified value depending on the temperature in the room. 4) If the vacuum cleaner does not turn on, it may be due to another malfunction. In this case, contact the dealer's service center indicated on the purchase receipt.

STORAGE

1) Before putting the vacuum cleaner away for a long period of time, clean the vacuum cleaner body, dust container outside and inside, cyclone filter (24), filters (25, 26), and HEPA exhaust filter (19). 2) To make it easier to store the vacuum cleaner, use the parking position hanger (16) to attach the tube (4) and hose (7). 3) Attach the accessory holder (27) to mount the crevice nozzle (28) and 2-in-1 upholstery brush (29). 4) Store the vacuum cleaner in a dry and cool place, out of the reach of children and people with disabilities.

The complete set consists of:

1. vacuum cleaner with installed dust container and filters
2. flexible hose
3. telescopic extension tube
4. floor/carpet brush
5. crevice tool
6. Upholstery brush 2-in-1
7. Mini-TURBO brush
8. Parquet brush
9. crevice nozzle
10. instruction manual
11. hanger for accessories

Technical Specifications

Power supply: 220-240V~50-60Hz

Rated power: 700W

Suction power: 170W

Dust container capacity: 1.6 liters

For the sake of the environment. Cardboard packaging and polyethylene (PE) bags should be disposed of in the appropriate containers for separate collection of municipal waste according to their description. If there are batteries in the device, remove them and separately return them to a collection and storage point. Return the used device to a suitable collection and storage facility, as the hazardous substances in it may pose a threat to health and the environment. The marking on the product indicates that the device should not be disposed of in the container with municipal waste. Waste electrical equipment is waste that contains substances harmful to humans, animals and the environment. These substances can lead to contamination of the soil, water or air, and through this they can enter the human body and lead to numerous health ailments, such as vision, hearing, speech disorders, they can also damage the kidneys, liver and heart, and cause skin diseases. Harmful substances can also have adverse effects on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing on the contaminated soils, and products made from them may risk the above-mentioned health effects. Do not dispose of the device in the municipal waste container!!!

Service: If you wish to purchase spare parts or report any complaints, please contact directly the seller who issued the receipt.

USE OF ACCESSORIES:

- Floor/carpet brush (1): when using the brush (1), set the switch (2) to the desired position "Floor/Carpet".

USE OF ACCESSORIES:

GENERAL SAFETY CONDITIONS

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

1. Before using the device, read the user manual and follow the instructions contained therein. The manufacturer is not responsible for damage caused by use of the device contrary to its intended purpose or improper operation.
2. The device is for household use only. Do not use for any purposes other than those consistent with its intended use.
3. The device should only be connected to a grounded outlet of 220-240V ~50-60 Hz.

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND SAVE FOR FUTURE REFERENCE

1. Before using the device, read the user manual and follow the instructions contained therein. The manufacturer is not responsible for damage caused by using the device contrary to its intended purpose or unprofessional operation.
2. The device is for household use only. Do not use for other purposes that are not in accordance with its intended purpose.
3. The device should only be connected to a grounded outlet of 220-240V ~50-60 Hz. To increase operational safety, do not connect multiple electrical devices to one circuit at the same time.
4. Be especially careful when using the device when children are nearby. Children should not be allowed to play with the device. Do not allow children or persons unfamiliar with the device.
5. WARNING: This equipment can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or persons who lack sufficient experience or knowledge of the equipment, if they are under supervision or if they have been given instructions on how to use the equipment, instructions on safe use of the device and are aware of the dangers associated with its use. Children should not play with the equipment. Cleaning and maintenance of the device should not be performed by children unless they are older than 8 years and these actions are performed under supervision.
6. Whenever you finish using it, unplug the plug from the outlet by holding the outlet with your hand. DO NOT pull the power cord.
7. Do not immerse the cable, plug, or the entire appliance in water or any other liquid. Do not expose the appliance to weather conditions (rain, sun, etc.) or use it in conditions of high humidity (bathrooms, damp campers).
8. Periodically check the condition of the power cord. If the power cord is damaged, it should be replaced by a specialized service to avoid danger.
9. Do not use the appliance if the power cord is damaged, if it has been dropped or damaged in any way, or if it is not working normally. Do not attempt to repair the appliance yourself, as this may lead to electric shock. Take the damaged appliance to an appropriate service center for inspection or repair. All repairs should only be carried out by authorized services. Improperly performed repairs may pose a serious threat to the user.
10. Do not use the appliance near flammable materials.
11. The power cord must not touch hot surfaces.
12. Do not leave the appliance or plug unattended while it is switched on.
13. To ensure additional protection, it is advisable to install a residual current device (RCD) with a rated residual current in the electrical circuit not exceeding 30 mA. In this regard, consult a qualified electrician.
14. Do not allow the motor part of the appliance to get wet.
15. Do not use the appliance outdoors; use it only indoors.
16. Do not use the vacuum cleaner to pick up flammable substances (such as fuel, solvents).
17. Do not vacuum objects with sharp edges (e.g., glass shards).
18. Do not point the vacuum cleaner's suction tube at other people or animals.
19. Only vacuum dry surfaces.
20. Use only accessories intended for this appliance.
21. Be especially careful when vacuuming stairs; watch out for your safety.
22. Do not block the ventilation openings.
23. Do not operate the vacuum cleaner without the filter in place.
24. Do not pull the vacuum cleaner by the hose.
25. Make sure the power cord does not get caught in doors or become trapped. When moving the vacuum cleaner, pay attention to the length of the power cord. Suddenly pulling the vacuum cleaner while the cord is under tension can damage it.
26. Do not vacuum dust and construction debris; residues of this type of contamination will immediately void the warranty.
27. Do not leave the appliance unattended while it is in operation.
28. Always disconnect the appliance from the power supply if it is left unattended and before assembling, disassembling, or cleaning.
29. Before removing the plug from the socket, always turn off the appliance with the button.

ATTENTION:

Suction power: 170 W