ADLER

AD 7059 - Vacuum Cleaner ADLER - Free user manual and instructions

Find the device manual for free AD 7059 ADLER in PDF.

📄 124 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ADLER AD 7059 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeBagless Vacuum Cleaner
ModelAD 7059
BrandAdler
Maximum Power2000 W
Container Capacity2.5 L
FiltrationWashable HEPA Filter
Operating Radius8 m (5 m cable + 3 m hose)
Noise Level72 dB(A)
Dimensions (L x W x H)40 x 28 x 32 cm
Weight4.8 kg
Power Supply220-240 V ~ 50/60 Hz
Brush TypeMotorized Roller Brush
Included AccessoriesCrevice tool, upholstery brush, dusting brush
Filter MaintenanceRegular cleaning under cold water
Filter ReplacementEvery 6 months depending on use
SafetyAutomatic shut-off in case of overheating
Spare Parts AvailableYes, filter, brush, hose
RepairabilityRepairability index: 8.2/10
Warranty2 years

Frequently Asked Questions - AD 7059 ADLER

How to empty the container of the Adler AD 7059 vacuum cleaner?
Press the release button on top of the container, then lift the lid. Empty the dust into a trash can and rinse the container with clean water if necessary. Let it dry completely before reassembling.
Is the HEPA filter washable?
Yes, the HEPA filter of the Adler AD 7059 is washable with cold water. Let it air dry for at least 24 hours before reinstalling. Do not use detergent or put it in the dishwasher.
What to do if the vacuum loses suction?
First check if the container is full or the filter is clogged. Clean the filter and empty the container. Then inspect the hose and brush for any blockage. If the problem persists, refer to the manual.
How to maintain the motorized brush?
Turn off and unplug the appliance. Remove the brush by pressing the side tabs. Remove hair and tangled threads with scissors or a cleaning tool. Reassemble by clicking it back.
Is the power cord retractable?
Yes, the Adler AD 7059 is equipped with an automatic cord rewinder. Press the pedal at the back of the appliance to rewind the cord neatly.
Can I use the vacuum on hard floors?
Yes, the main brush can be used on hard floors. For better efficiency, you can deactivate the motorized brushing by pressing the button on the handle. Use appropriate accessories for furniture and crevices.
How to reset the filter change indicator?
After cleaning or replacing the filter, plug in the vacuum and turn it on. Press and hold the reset button (located near the indicator) for 3 seconds until the indicator turns off.
The vacuum stops by itself during use, what to do?
This may be due to overheating. Allow the appliance to cool down for 30 minutes after unplugging it. Check that the filter and container are not clogged. If the problem persists, contact customer service.
Where can I buy spare parts for the Adler AD 7059?
Spare parts (filters, brushes, hoses) are available on the official Adler website or at authorized dealers. Use the model number AD 7059 to find compatible parts.
What is the noise level of this vacuum cleaner?
The noise level is about 72 dB(A), comparable to a standard vacuum cleaner. Use it preferably when you are not bothered by noise.

User questions about AD 7059 ADLER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual AD 7059 - ADLER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AD 7059 by ADLER.

USER MANUAL AD 7059 ADLER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ADLER

Model : AD 7059

Category : Vacuum Cleaner