Q: My AD 1190 clock radio is plugged in but the battery is dead and won't turn on. The charge indicator is red while connected via USB. What should I do?

The fact that the charge indicator lights up red is a very good sign: it indicates that the device is correctly detecting the USB power and is starting to charge the built-in 1800 mAh battery. However, you need to let the device charge long enough before turning it back on. Here is the procedure to follow: Fully charge the device - With a standard voltage of 5V/1A, a fully discharged 1800 mAh battery requires between 1 and 1.5 hours to fully charge. Keep the red indicator on and wait at least 1 hour before attempting to turn it back on. Check the USB cable - Test with another functional 5V/1A USB cable. A poor connection, a damaged or defective cable prevents the actual charge from reaching the battery. Make sure the USB connection is securely plugged into the port. Press and hold the Power button - Once sufficient charge is reached (minimum 1 hour), unplug the USB cable and then press and hold the ON/OFF button located at the back of the device (button 10) continuously for at least 10 to 15 seconds. The device may take a few seconds to respond. If the device remains completely inactive after following all these steps (full charge of at least 1 hour and prolonged pressing of the button), there may be a hardware issue. The battery may be defective and unable to hold its charge, or there may be an internal electronic malfunction preventing it from turning on. In this case, contact Adler customer service or check the warranty conditions of your product, as this falls under a manufacturing defect. Note: It is normal for the device not to respond at all if the battery is not sufficiently charged. Be patient and always allow the minimum recommended charging time before concluding that there is a defect.

Q: What are the functions of each button on the ADLER AD 1184 remote control?

The remote control for the ADLER AD 1184 has 19 main buttons to control your radio. Button functions: Standby - Press briefly to put the radio in/out of standby Mode - Switch between DAB/FM/BT/USB or TF/SD Numeric keys (0-9) - Select a radio station or track number Previous/Next - Navigate between stations or tracks; hold down for fast search Enter/OK - Confirm menu selections or play/pause music Back - Go back one step in menus VOL +/- - Increase or decrease the volume Mute - Mute/unmute the speakers Sleep Timer - Set the sleep timer: OFF/15/30/45/60/75/90/120 minutes Snooze - Activate when the alarm goes off; press to adjust duration Brightness - Toggle between 3 levels of LCD brightness Preset - Access saved favorite stations Skip - Skip to the next track Clock/Alarm/Menu - Access time, alarm, and system settings Info - Display various information DAB/FM - Start searching for radio stations

Q: What is the operating principle of the ADLER AD 4496 boiler?

The ADLER AD 4496 boiler operates on the principle of gas combustion . It is designed to supply both the central heating system and the production of domestic hot water. Main features: Nominal power: 24 kW Fuel: natural gas or propane Energy efficiency: 90% Safety: equipped with mechanisms to protect against overheating and gas leaks The device converts the energy from gas into heat through controlled combustion. Compliant with European standards, it has built-in safety devices to protect its operation. An annual professional inspection is recommended to keep the device in good working condition.

Question 1

My AD 1190 clock radio is plugged in but the battery is dead and won't turn on. The charge indicator is red while connected via USB. What should I do?

Accepted Answer

The fact that the charge indicator lights up red is a very good sign: it indicates that the device is correctly detecting the USB power and is starting to charge the built-in 1800 mAh battery. However, you need to let the device charge long enough before turning it back on.

Here is the procedure to follow:

Fully charge the device - With a standard voltage of 5V/1A, a fully discharged 1800 mAh battery requires between 1 and 1.5 hours to fully charge. Keep the red indicator on and wait at least 1 hour before attempting to turn it back on.
Check the USB cable - Test with another functional 5V/1A USB cable. A poor connection, a damaged or defective cable prevents the actual charge from reaching the battery. Make sure the USB connection is securely plugged into the port.
Press and hold the Power button - Once sufficient charge is reached (minimum 1 hour), unplug the USB cable and then press and hold the ON/OFF button located at the back of the device (button 10) continuously for at least 10 to 15 seconds. The device may take a few seconds to respond.

If the device remains completely inactive after following all these steps (full charge of at least 1 hour and prolonged pressing of the button), there may be a hardware issue. The battery may be defective and unable to hold its charge, or there may be an internal electronic malfunction preventing it from turning on. In this case, contact Adler customer service or check the warranty conditions of your product, as this falls under a manufacturing defect.

Note: It is normal for the device not to respond at all if the battery is not sufficiently charged. Be patient and always allow the minimum recommended charging time before concluding that there is a defect.

Question 2

How to install the potato grater in the grinder?

Accepted Answer

To install the potato grater in your ADLER AD 4815 grinder:

Installation Steps

Hold the plastic edges of the grater (orange for the fine variant, or dark red for the coarse variant) and insert it into the grinding chamber.
Turn clockwise until it is properly positioned on the drive shaft. You will feel a slight resistance when it is in place.
Insert the pusher into the opening of the dispenser at the top of the chamber.

Tip: For potatoes, both grater options available yield excellent results: the fine grater (orange) for a smoother texture, or the coarse grater (dark red) for a more rustic texture.

Important: Before any assembly or disassembly, ensure that the device is unplugged.

Question 3

What are the functions of each button on the ADLER AD 1184 remote control?

Accepted Answer

The remote control for the ADLER AD 1184 has 19 main buttons to control your radio.

Button functions:

Standby - Press briefly to put the radio in/out of standby
Mode - Switch between DAB/FM/BT/USB or TF/SD
Numeric keys (0-9) - Select a radio station or track number
Previous/Next - Navigate between stations or tracks; hold down for fast search
Enter/OK - Confirm menu selections or play/pause music
Back - Go back one step in menus
VOL +/- - Increase or decrease the volume
Mute - Mute/unmute the speakers
Sleep Timer - Set the sleep timer: OFF/15/30/45/60/75/90/120 minutes
Snooze - Activate when the alarm goes off; press to adjust duration
Brightness - Toggle between 3 levels of LCD brightness
Preset - Access saved favorite stations
Skip - Skip to the next track
Clock/Alarm/Menu - Access time, alarm, and system settings
Info - Display various information
DAB/FM - Start searching for radio stations

Question 4

What is the operating principle of the ADLER AD 4496 boiler?

Accepted Answer

The ADLER AD 4496 boiler operates on the principle of gas combustion. It is designed to supply both the central heating system and the production of domestic hot water.

Main features:

Nominal power: 24 kW
Fuel: natural gas or propane
Energy efficiency: 90%
Safety: equipped with mechanisms to protect against overheating and gas leaks

The device converts the energy from gas into heat through controlled combustion. Compliant with European standards, it has built-in safety devices to protect its operation.

An annual professional inspection is recommended to keep the device in good working condition.

User manual ADLER : user manuals and guides in PDF

Models ADLER most viewed

Browse manuals ADLER by appliance type

Recent questions about devices ADLER