KEYS-TO-GO - Keyboard LOGITECH - Free user manual and instructions

Product Type	Ultra-portable wireless keyboard
Dimensions (L x W x H)	242 x 137 x 6 mm
Weight	180 g
Power source	CR2032 button cell battery (included)
Estimated battery life	3 months (depending on usage)
Connectivity	Bluetooth 3.0
Wireless range	10 meters
Compatible operating systems	iOS, Android, Windows, macOS
Number of keys	79 (island layout)
Materials	Plastic with silicone coating for protection
Available colors	Gray, Blue, Pink
Main features	Touch typing, specific iOS/Android shortcuts, integrated cover
Care and cleaning	Clean with a soft, slightly damp cloth; do not use abrasive products
Safety	Avoid excessive moisture; only use the recommended battery
Spare parts and repairability	Standard CR2032 button cell battery, commercially available
Manufacturer warranty	1 year

Frequently Asked Questions - KEYS-TO-GO LOGITECH

How to turn on the Keys-To-Go keyboard?

Slide the switch on the side of the keyboard to the ON position. An indicator light flashes briefly to confirm power on.

How to connect the keyboard via Bluetooth?

Ensure the keyboard is on. Enable Bluetooth on your device (iOS/Android/PC). Look for 'Keys-To-Go' in the device list and select it. If a code confirmation appears, type the code on the keyboard and confirm.

How to replace the keyboard battery?

Open the battery compartment using a Phillips screwdriver (located under the keyboard). Replace the used battery with a new CR2032 button cell respecting polarity (+ / -). Close the compartment carefully.

Is the keyboard compatible with an Android tablet?

Yes, the Logitech Keys-To-Go works with any Bluetooth-compatible device running Android, iOS, Windows or macOS. Check that your Android version supports Bluetooth keyboards (Android 4.0+ recommended).

What are the keyboard shortcuts for iOS?

The keyboard includes specific iOS keys: press Cmd + H for home, Cmd + Space for Spotlight search, and Cmd + Tab to switch between apps.

What is the battery life?

Estimated battery life is about 3 months for standard use of 2 hours per day. Intensive use or backlighting (not present on this model) would reduce this duration.

Is the keyboard waterproof?

No, the keyboard is not waterproof. The silicone coating offers limited splash resistance, but it must not be immersed or exposed to excessive moisture. In case of liquid spill, turn off and dry quickly.

How to clean the keyboard?

Use a soft cloth slightly damp (clean water) to wipe the surface. Do not use chemical or abrasive products. For stubborn dirt, you can remove the silicone cover (if removable) and wash it separately with soapy water.

What are the exact dimensions of the keyboard?

The keyboard measures 242 mm long, 137 mm wide, and 6 mm thick. It is designed to be easily carried in a bag or case.

Is the protective cover an integral part of the keyboard?

Yes, the keyboard is integrated into a protective cover that folds to form a lid. This cover protects the keys when transported and also serves as a tablet stand.

USER MANUAL KEYS-TO-GO LOGITECH

Ultra-portable keyboard

Setup Guide

BC

Contents

English. 3

Deutsch .....11

Français .....20

Italiano. 29

Español ..... 38

Português ..... 47

Nederlands .....56

Svenska 65

Dansk 74

Norsk 83

Suomi 92

Greek. . . . . . . . . . . . . . . . . . . . 101

Russian. . . . . . . . . . . . . . . . . . . 110

Hungarian 119

1. Hot keys
2. Keyboard
3. Bluetooth® connect key
4. Battery check key
5. Bluetooth and battery status light
6. On/off switch
7. Micro-USB charging port
8. Micro-USB charging cable
9. Documentation

Set up your product

1. Turn on the keyboard:

Bluetooth discovery starts automatically and continues for 15 minutes. The status light blinks blue.

If the status light briefly turns red, charge the battery. For more information, see "Charge the battery."

2. Establish Bluetooth connection:

On your iPad, make sure Bluetooth is on. Select Settings > Bluetooth > On.

Select "Keys-To-Go" from the Devices menu.

Tip: If "Keys-To-Go" isn't in the list, try pressing and holding the Bluetooth connect key on your keyboard for 2 seconds.

Charge the battery

You should charge the battery when:

• the status light turns red briefly when you turn on the keyboard, or
• the status light blinks red when you press the battery check key:

A fully charged battery provides about 3 months of power when the keyboard is used about two hours a day.

Charging your battery

1. Use the micro-USB charging cable provided to connect the keyboard to your computer or a USB power adaptor. The status light blinks green while the keyboard is charging.

1. Charge your keyboard until the status light turns solid green.

Each minute of charging gives you about two hours' use.

Note: This ratio is approximate and is based on the standard user experience. Your result may vary.

It takes 2.5 hours to fully charge the battery.

Hot keys

Home = iPad Home screen

Switch applications

Search

Type keywords in the search bar for contacts, music, notes, events, mail, web, Wikipedia, and more

Switch language

Switches the keyboard language

Virtual keyboard

Shows/hides the virtual keyboard

Screen Shot

Previous track

Play/Pause

Next track

Mute

Volume down

Volume up

Bluetooth connect

Battery check

Function keys

Fn + X = Cut

Fn + C = Copy

Fn + V = Paste

Fn + Left cursor = Select left

Selects text on the left, word by word

Fn + Right cursor = Select right

Selects text on the right, word by word

Note:

- To select a function key, press and hold the Fn key, and then press the key indicated above.

Use your product

Status light indications

Light Description
Blinking green The battery is charging.
Solid green When charging, indicates that the battery is fully charged (100%).When you press the battery check key, solid green for 2 seconds indicates that the battery power is good (above 20%).
Blinking red Battery power is low (less than 20%).Recharge the battery.
Solid red When you first turn on your keyboard,the status light shows solid red briefly if battery power is low.
Blinking blue Fast: The keyboard is in discovery mode, ready for pairing.Slow: The keyboard is trying to reconnect to your iPad.
Solid blue Bluetooth pairing or reconnection is successful.

Connecting to a different iOS device

1. Make sure the keyboard is turned on.
2. On your iOS device, check that Bluetooth is turned on. Select Settings > Bluetooth > On.
3. Press and hold the Bluetooth connect key on the keyboard for 2 seconds. The keyboard turns discoverable for 3 minutes.
4. Select "Keys-To-Go" from the Devices menu.

When you've finished using your product When not in use, turn off the keyboard to conserve battery power.

Note:

- The keyboard enters sleep mode if powered on and not used for 2 hours. To exit sleep mode, press any key.

Battery disposal at product end of life

1. Cut along the fabric at the top edge of the keyboard:

1. Use a screwdriver to pry the fabric away from the area around the on/off switch:

1. Separate the inner and outer fabric layers, and pull them away from the corner:

1. Pull back the yellow plate to reveal the battery and remove it:

1. Dispose of the battery according to local laws.

Visit Product Support

There's more information and support online for your product. Take a moment to visit Product Support to learn more about your new Bluetooth keyboard. Browse online articles for setup help, usage tips, and information about additional features. If your Bluetooth keyboard has optional software, learn about its benefits and how it can help you customize your product.

Connect with other users in our Community Forums to get advice, ask questions, and share solutions.

At Product Support, you'll find a wide selection of content including:

• Tutorials
• Troubleshooting
• Support community • Online documentation
• Warranty information
• Spare parts (when available)

Go to:

www.logitech.com/support/keystogo-ipad

Troubleshooting

The keyboard does not work

• Press any key to wake the keyboard from sleep mode.
• Turn the keyboard Off and then back On.
• Recharge the internal battery. For more information, see “Charge the battery.”
• Re-establish the Bluetooth connection between the keyboard and your iPad:
• On your iPad, check that Bluetooth is turned on.
• Press and hold the Bluetooth connect key on your keyboard for 2 seconds.
• Choose “Keys-To-Go” from the Devices menu on your iPad. The status light briefly turns blue after the Bluetooth connection is made.

What do you think?

Thank you for purchasing our product. Please take a minute to tell us what you think of it.

www.logitech.com/ithink

10 English

Note:

www.logitech.com/ithink

Note:

www.logitech.com/ithink

Note:

www.logitech.com/ithink

Note:

www.logitech.com/ithink

Note:

www.logitech.com/ithink

Know your product

N.B.

www.logitech.com/ithink

Product overview

Note!

www.logitech.com/ithink

1. Charge the keyboard until the status indicator lights up solid green without blinking.

Note:

www.logitech.com/ithink

1. Dispose of the battery in accordance with local regulations.

www.logitech.com/ithink

Get to know your product

Note:

www.logitech.com/ithink

Note:

www.logitech.com/ithink

Note.

www.logitech.com/ithink

Note:

www.logitech.com/ithink

Product description

Note:

Get to know your device

Note:

Product description

After you finish using the product

Note:

1. Dispose of batteries in accordance with local regulations.

Get to know your product

Note:

Note:

Logitech®

www.logitech.com

www.logitech.com/support/keystogo-ipad

© 2014 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Apple, iPad, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

621-000446.002