Q: How to clean dust and black spots on the Yaber T1 Pro?

The Yaber T1 Pro uses an open optics , making regular cleaning important to maintain projection quality. Here’s how to effectively remove black spots and dust: Three recommended methods Cold air blowing (recommended first) - Use cold air through the dust port to blow away light particles. Light tapping - Gently tap the projector to dislodge accumulated dust. Cotton swabs - For stubborn spots: use soft cotton swabs to gently clean the optics if necessary. What to absolutely avoid Do not use paper or dry cloth to rub directly on the lens Never use chemicals, detergents, or liquids No water or moisture Dust filter maintenance Clean the dust filter every 6 months to 1 year depending on your usage. To access it, remove the rear cover and the sealing cap with a screwdriver.

Q: Does the ambient lighting stay on during projection?

The Yaber T1 Pro has an ambient lighting mode (Ambient Light Mode) that operates independently of the projection. Unlike a standard projection, this mode is specifically activated by tilting the projector downwards when it is in power-on mode or speaker mode. Operation during projection: During normal use of the projector (facing forward for projection onto a screen or wall), the ambient lighting mode is not active. The ambient lighting only activates when you tilt the projector downwards to create a light ambiance, thus creating two distinct operating modes: classic projection and ambient lighting. If you want to use the T1 Pro exclusively for projecting content, the ambient lighting will not activate unless you tilt the projector downwards. Therefore, you can project without any restrictions from the ambient lighting. Additionally, if you activate this mode (by tilting the projector downwards), you can adjust or disable it via the projector's settings menu by accessing the section dedicated to ambient lighting. To completely disable this mode or in case of malfunction, consult the T1 Pro Settings menu or contact Yaber support at service@yaber.com for assistance tailored to your model.

Question 1

Can Bluetooth be used for audio playback while the ambient lamp is on?

Accepted Answer

Yes, you can use Bluetooth audio playback simultaneously with the ambient lamp.

According to the Yaber T1 Pro manual, these two features are independent and can work together:

Bluetooth Connectivity: you can pair speakers or sound systems via Settings > Bluetooth and listen to music from your phone.
Ambient Mode: the ambient lighting lamp is activated by tilting the projector downwards (when powered on). In this mode, the projector no longer displays the image but continues to play audio content through its internal speakers or connected Bluetooth devices.

There are no reported limitations in the manual preventing Bluetooth audio playback while the ambient mode is in operation. Therefore, you can listen to music via Bluetooth while enjoying the ambient lighting.

Question 2

How to clean dust and black spots on the Yaber T1 Pro?

Accepted Answer

The Yaber T1 Pro uses an open optics, making regular cleaning important to maintain projection quality. Here’s how to effectively remove black spots and dust:

Three recommended methods

Cold air blowing (recommended first) - Use cold air through the dust port to blow away light particles.
Light tapping - Gently tap the projector to dislodge accumulated dust.
Cotton swabs - For stubborn spots: use soft cotton swabs to gently clean the optics if necessary.

What to absolutely avoid

Do not use paper or dry cloth to rub directly on the lens
Never use chemicals, detergents, or liquids
No water or moisture

Dust filter maintenance

Clean the dust filter every 6 months to 1 year depending on your usage. To access it, remove the rear cover and the sealing cap with a screwdriver.

Question 3

Does the ambient lighting stay on during projection?

Accepted Answer

The Yaber T1 Pro has an ambient lighting mode (Ambient Light Mode) that operates independently of the projection. Unlike a standard projection, this mode is specifically activated by tilting the projector downwards when it is in power-on mode or speaker mode.

Operation during projection: During normal use of the projector (facing forward for projection onto a screen or wall), the ambient lighting mode is not active. The ambient lighting only activates when you tilt the projector downwards to create a light ambiance, thus creating two distinct operating modes: classic projection and ambient lighting.

If you want to use the T1 Pro exclusively for projecting content, the ambient lighting will not activate unless you tilt the projector downwards. Therefore, you can project without any restrictions from the ambient lighting. Additionally, if you activate this mode (by tilting the projector downwards), you can adjust or disable it via the projector's settings menu by accessing the section dedicated to ambient lighting.

To completely disable this mode or in case of malfunction, consult the T1 Pro Settings menu or contact Yaber support at service@yaber.com for assistance tailored to your model.

User manual Yaber : user manuals and guides in PDF

Models Yaber most viewed

Browse manuals Yaber by appliance type

Recent questions about devices Yaber