How to remove the LED light fixture to access the blades of the CasaFan Eco Neo III?

Question

Accepted Answer

Turn off the power at the circuit breaker before any intervention. This is a mandatory step for your safety.

The LED light kit of the CasaFan Eco Neo III is an optional accessory that attaches under the motor and may need to be removed to access the blades or perform maintenance. Here are the steps to remove it:

Locate the cover ring situated directly under the motor box
Slowly turn this ring counterclockwise until it detaches. There is no need to force it
Remove the decorative ring, which frees access to the light fixture cover
The light fixture cover (bottom part of the kit) can then be removed downwards by simply pulling
If the light fixture is still electrically connected, gently disconnect the electrical connectors. These connectors can be unplugged by hand without the need for tools

Once the light fixture is removed, you have direct access to the fan blades. You can then access the screws securing the blades located on the motor mounting arms, as well as the tightening screws for the blade supports.

Important: Before handling the light fixture or electricity, ensure that the power is completely turned off at the circuit breaker. Work on electrical connections and electrical maintenance should be carried out by a qualified electrician. Never reassemble the light fixture without first turning off the power.

Practical tip: Before reassembling the kit, check that all electrical connectors are in good condition. The light fixture cover should be reattached carefully to avoid damaging the seals or connectors.

User manual CasaFan : user manuals and guides in PDF

Models CasaFan most viewed

Browse manuals CasaFan by appliance type

Recent questions about devices CasaFan