Q: How to connect the ground wire of the Create Wind Calm fan with light?

For the Create Wind Calm with LED light fan, the ground wire must be connected correctly to the connection panel according to the wiring diagram provided in the installation instructions. Two grounding points are provided on the receiver: one for the fan itself and one for the LED lighting circuit. Steps to connect the ground wire: Turn off the power at the circuit breaker before any work Identify the ground wire in your installation (normally green and yellow or yellow depending on your country) Connect the ground wire to the “Ground Terminal” of the remote receiver indicated in the diagram Ensure that the fan, mounting bracket, and lighting kit are all properly grounded Check that all connections are well insulated and secure Wiring diagram for the model with LED: The receiver receives the mains input through the L (black) and N (white) wires. The ground wire must be connected separately. For the LED lighting, a dedicated blue cable (Light L) controls the light, while the gray, pink, and red cables control the motor speeds. Important: A faulty ground connection on this model can cause dim or flickering LED lights . Please ensure that the ground wire is firmly connected and undamaged. If you are not familiar with electrical connections, consult a qualified electrician to ensure a safe installation that complies with local standards.

Q: How to download the assembly manual for the Create Wind Cup?

The assembly manual for the Create Wind Cup is available for free immediate download on this page. At the top of the PDF viewer, click on the "Download the manual in PDF" button (downward arrow icon) to retrieve the complete 88-page document in French. The manual thoroughly covers all aspects of assembly and use: Safety instructions and electrical recommendations Complete identification of parts and accessories Installation of the wall or suspended mounting bracket Assembly of the blades, the rosette, and the structure Electrical connection and installation of the rod Programming and use of the remote control (speeds, lighting, timer, reverse function) Wi-Fi connection for compatible models and use of the mobile app Troubleshooting tips for vibrations or abnormal noises No registration is required to download. The document can be viewed offline or printed for step-by-step guidance during assembly. For specific questions, the manual also includes an integrated FAQ section answering the 10 most frequently asked questions about the installation and use of the fan. An AI assistant is also available on the page for any additional questions.

Question 1

How to mount the Create Wind Calm fan on a beam or external structure?

Accepted Answer

The Create Wind Calm fan can be mounted on a beam or load-bearing structure depending on the material of the latter. Here are the recommended methods:

Mounting on wooden structure

The mounting bracket must be firmly screwed onto the load-bearing structure (wooden beam). Use screws that are long and sturdy enough to go through the bracket and penetrate deeply into the wood.

Mounting on concrete or steel structure

For a concrete beam, drill 8 mm holes and use appropriate expansion plugs before securing the mounting bracket.

Important points to follow

Ensure that the beam is strong enough to support the weight of the fan (approximately 4-5 kg depending on the model)
Maintain a minimum height of 2.3 m between the ground and the lowest point of the blades
The fan is designed for indoor use - if your veranda is completely open to the elements, this is not suitable
Ensure a proper grounding of the fan, the bracket, and all metal components

Refer to the detailed mounting diagrams in your manual (installation pages) to precisely adapt the type of mounting to the material of your beam.

Question 2

How to disable or turn off the indicator lights of the Create Air Mist?

Accepted Answer

It is not possible to disable or turn off the indicator lights of the Create Air Mist while the device is in operation. The control panel has built-in indicator lights that automatically turn on to inform you of the device's status.

These indicator lights indicate:

Power (power indicator) - lit when the device is plugged in
The selected mode (natural mode indicator or night mode)
Active functions (oscillation indicator, timer, humidification)
The humidity level during spraying

There is no button or setting in the manual to disable these indicator lights. They are an integral part of the product's control and indication system.

The only way to completely turn off the lights is to power down the device by pressing the power button, which will turn off all lights except the power indicator that remains on as long as the device is plugged into an electrical outlet.

Question 3

How to install the rear grille on the motor block of the AIR STAND WOOD fan?

Accepted Answer

The rear grille of your Create AIR STAND WOOD fan attaches to the motor block using a clip or clamp system, which is the most common for this type of stand fan.

Ensure that the fan is turned off and unplugged before proceeding;
Locate the attachment points (notches or holes) on the sides of the motor block;
Align the clips of the rear grille with these points;
Press firmly on the grille until it clicks into place properly;
Check that the grille is securely attached and stable before using the device.

Question 4

How to connect the ground wire of the Create Wind Calm fan with light?

Accepted Answer

For the Create Wind Calm with LED light fan, the ground wire must be connected correctly to the connection panel according to the wiring diagram provided in the installation instructions. Two grounding points are provided on the receiver: one for the fan itself and one for the LED lighting circuit.

Steps to connect the ground wire:

Turn off the power at the circuit breaker before any work
Identify the ground wire in your installation (normally green and yellow or yellow depending on your country)
Connect the ground wire to the “Ground Terminal” of the remote receiver indicated in the diagram
Ensure that the fan, mounting bracket, and lighting kit are all properly grounded
Check that all connections are well insulated and secure

Wiring diagram for the model with LED: The receiver receives the mains input through the L (black) and N (white) wires. The ground wire must be connected separately. For the LED lighting, a dedicated blue cable (Light L) controls the light, while the gray, pink, and red cables control the motor speeds.

Important: A faulty ground connection on this model can cause dim or flickering LED lights. Please ensure that the ground wire is firmly connected and undamaged. If you are not familiar with electrical connections, consult a qualified electrician to ensure a safe installation that complies with local standards.

Question 5

How to download the assembly manual for the Create Wind Cup?

Accepted Answer

The assembly manual for the Create Wind Cup is available for free immediate download on this page. At the top of the PDF viewer, click on the "Download the manual in PDF" button (downward arrow icon) to retrieve the complete 88-page document in French.

The manual thoroughly covers all aspects of assembly and use:

Safety instructions and electrical recommendations
Complete identification of parts and accessories
Installation of the wall or suspended mounting bracket
Assembly of the blades, the rosette, and the structure
Electrical connection and installation of the rod
Programming and use of the remote control (speeds, lighting, timer, reverse function)
Wi-Fi connection for compatible models and use of the mobile app
Troubleshooting tips for vibrations or abnormal noises

No registration is required to download. The document can be viewed offline or printed for step-by-step guidance during assembly.

For specific questions, the manual also includes an integrated FAQ section answering the 10 most frequently asked questions about the installation and use of the fan. An AI assistant is also available on the page for any additional questions.

User manual Create Fan : user manuals and guides in PDF

Models Create Fan most viewed

Other categories Create

Recent questions about Fan Create