Question 1

How to set the day on the LIVARNO LED lamp with sensor?

Accepted Answer

To set the day on your LIVARNO LED lamp equipped with a sensor, follow these simple steps:

Turn on the lamp and make sure the display is visible.
Access the setting mode by pressing the Mode, Set, or a similar button on the lamp.
Set the day using the + or - buttons to scroll through the days of the week. Depending on the model, the day may be displayed as a number (1 for Monday, 2 for Tuesday, etc.) or by its name.
Confirm your selection by pressing the Mode or Set button again.
Exit the setting mode by waiting a few seconds without pressing a button, or by pressing the Mode button until you return to normal display.

This procedure allows you to correctly adjust the day displayed on your lamp, which can be useful for alarm functions or integrated time display.

Question 2

Why did my LIVARNO LED ceiling light suddenly turn off and won't turn back on?

Accepted Answer

If your LIVARNO LED ceiling light has suddenly turned off and won't turn back on, several causes may explain this malfunction. Here are the steps to follow to identify and possibly resolve the issue:

1. Check the power supply

Make sure the switch controlling the ceiling light is in the ON position.
Check if other electrical devices are working on the same circuit to rule out a general power outage.
Check the circuit breaker or fuse corresponding to the ceiling light circuit in your electrical panel. If the breaker has tripped, reset it.

2. Check the LED bulb

Although LEDs have a long lifespan, they can sometimes fail.
If possible, replace the LED bulb with another compatible functional one to check if the problem is with the bulb.

3. Inspect the electrical connections

If you are comfortable with electrical work, turn off the main power supply before any intervention.
Check that the wires are properly connected, with no signs of wear or stripping.
Ensure that the connection terminals of the ceiling light are clean and tightly secured.

4. Other possible causes

An internal fault in the ceiling light or its electronic circuit may be the cause of the failure.
In this case, it is recommended to contact a qualified professional for a safe diagnosis and repair.

By following these steps, you can often identify the cause of your LIVARNO LED ceiling light's sudden shutdown and take appropriate measures to get it working again.

Question 3

How to assemble the LIVARNO solar LED projector with motion detector and what to do in case of missing parts?

Accepted Answer

Contents of the package: Before starting the assembly, check that you have all the items provided with your LIVARNO projector: 1 solar LED projector with motion detector, 1 mounting hardware (2 plugs and 5 screws for model 1262-S, or 2 plugs and 2 screws for model 1262-B), and 1 spacer (only for model 1262-S). If a part is missing, contact customer service immediately (Tel. 00800 80040044 or administration@mynetsend.de) before proceeding with the assembly.

Preparation and choice of installation location: Select a location at a height of 2 to 4 m from the ground. Ensure that the projector can illuminate the desired area and that the motion detector (100° detection angle, range up to 8 m adjustable) covers the desired area. Keep it away from any urban lighting at night, as this may interfere with the detector. The solar panel should receive maximum direct light, ideally facing south. Finally, check that no gas, water, or electrical lines are located under the wall before drilling.

Mounting the projector (models 1262-B and 1262-S without spacer): Start by transferring the positions of the guide holes (visible on the projector) to the wall. Drill two holes with a diameter of 6 mm and insert the provided plugs. Screw the screws into the plugs, leaving about 3 mm of space between the screw head and the wall. Slide the projector's guide holes onto the screws and slide it along the guide to its final position. Adjust the gap between the screws and the wall if necessary to ensure a firm attachment.

Mounting the model 1262-S with spacer: If you are using the model 1262-S with spacer, start by securely screwing the spacer to the projector using the provided screws. Then, attach the spacer to the wall by sliding the screws through the guide holes of the spacer and into the wall plugs, then tighten them well.

Adjusting the angle and orientation: Once fixed, adjust the orientation of the projector by loosening the two rotary knobs located on the sides of the projector. You can tilt it up to 180° vertically to optimize lighting and motion detection. For the model 1262-S with spacer, an additional rotary knob allows you to adjust the height. Tighten all knobs again once the ideal position is reached. Ensure that the detector is oriented directly towards the area to be protected.

Initial cleaning and commissioning: Wipe the solar panel with a dry, lint-free cloth to ensure optimal charging. Ensure that the motion detector is not dirty. Allow the projector to charge in the sun for 7 to 8 hours during the day before first use. The device offers up to 40 hours of autonomy in continuous mode with a fully charged battery, and the detector provides an adjustable lighting duration of 10 to 60 seconds after motion detection.

In case of missing parts: If you notice the absence of a part after unpacking, do not attempt to assemble the projector. Contact LIVARNO customer service at the contact details provided below with your article number (IAN 459049_2401), proof of purchase, and a precise description of the missing parts. A free replacement will be offered under warranty. For your peace of mind, keep your original receipt, which serves as mandatory proof of purchase.

After-sales service contacts: In France: Tel. 00800 80040044 or Email: administration@mynetsend.de. For more information and additional manuals, visit www.lidl-service.com using your article number (IAN 459049_2401).

Question 4

How to adjust an outdoor LED projector LIVARNO?

Accepted Answer

Electrical installation and safety: Your LIVARNO projector must be installed by a qualified electrician. Before installation, ensure that the circuit is not live. The projector operates at 220-250V~, 50/60Hz, 20W and should be mounted 2-3 meters high, at least 0.5 meters away from flammable materials. Allow the product to cool for 15 minutes before touching it, as it can become very hot.

Three adjustment switches: Your LIVARNO projector has three rotary switches on the back of the motion detector to adapt the lighting to your environment. The TIME switch (no. 11) controls the lighting duration: turn it clockwise to increase the duration from 5 seconds to 5 minutes. The SENS switch (no. 12) adjusts the sensitivity of the detector: by turning it clockwise, you can increase the range up to 12 meters. The LUX switch (no. 13) determines the daylight level at which the lighting activates: it is adjustable from 2 lux (functional at night) to 20,000 lux (reacts even in broad daylight).

Orientation of the motion detector: This procedure should be performed at dusk. First, turn the LUX switch to the maximum (to the right), then orient the detector towards the area you wish to monitor. Move across this area with transverse movements (perpendicular to the detector) to check the coverage. You can adjust the sensitivity (SENS) or reorient the projector until you achieve the desired behavior. Important: the detector primarily captures perpendicular movements; it does not detect direct movements towards it.

Final adjustment according to the seasons: Once the detector is oriented, set the LUX switch to the desired position. Slowly turn it counterclockwise until the detector responds to movements in your area. Note that the detector detects thermal radiation: in cold seasons, it will be more sensitive to body heat than in warm seasons. Remember to adjust the sensitivity (SENS) throughout the seasons to maintain optimal performance.

Technical specifications: Your projector features 32 non-replaceable LEDs emitting 2100 lumens in warm white (3000K). The IP54 protection rating makes it resistant to dust and splashes. The motion detector's range reaches approximately 12 meters with a detection angle of 180°. The product is covered by a 36-month warranty from the date of purchase.

Maintenance: Before any intervention, cut off the power by removing the fuse or lowering the circuit breaker. Clean the projector only with a soft, slightly damp cloth. Never immerse the product in water or any liquid, as this could damage it. The LEDs cannot be replaced; if they fail, the projector must be repaired by a professional.

Question 5

How to adjust the LIVARNO LED solar spotlight with motion detector?

Accepted Answer

To optimize the operation of your LIVARNO LED solar spotlight with motion detector, here are the main adjustments to make:

1. Installation and Charging

Place the spotlight in a location exposed to direct sunlight so that the battery charges effectively.
Allow it to charge for at least 8 hours before the first use.
Ensure that the main switch is in the "ON" position if your model is equipped with one.

2. Adjusting the Motion Detector Sensitivity

Locate the sensitivity button or potentiometer, usually found at the back or side of the spotlight.
Turn it to adjust the detection distance: a high sensitivity will detect movements from further away, while a low sensitivity will limit detection to nearby movements.

3. Adjusting the Lighting Duration

Some models allow you to set how long the light stays on after detection.
Look for a button marked "Time" or similar and adjust the duration according to your needs (e.g., 10, 30, or 60 seconds).

4. Orientation and Angle of the Spotlight

Adjust the tilt angle of the spotlight to precisely illuminate the desired area.
To do this, slightly loosen the mounting screws, reposition the spotlight, and then tighten the screws.

5. Testing the Detector

After adjustments, test the detector by moving in front of the spotlight to check that it lights up correctly.

Additional Tips:

Ensure that the sensor is not obstructed and that the lens is clean for optimal operation.
If you encounter difficulties, check that the battery is well charged and that the installation is correct.

User manual LIVARNO Consumer product : user manuals and guides in PDF

Models LIVARNO Consumer product most viewed

Other categories LIVARNO

Recent questions about Consumer product LIVARNO