User manual PARKSIDE Vacuum Cleaner : 30 free PDF user manuals

Q: How to replace the broken wheel support of the PARKSIDE PWS 20 C2 vacuum cleaner?

The wheel support of your PARKSIDE PWS 20 C2 is the directional wheel located under the tank (container). This wheel can break after a shock or due to wear. Fortunately, it can be easily replaced in a few minutes. Required spare part: Directional wheels are sold in packs of 4 (reference 91105810 ). You can order them directly from www.grizzlytools.shop or contact customer service. Spare parts remain available throughout the warranty period (3 years). Steps to replace the broken wheel: Completely unplug the vacuum cleaner from the electrical outlet. Turn the device upside down to access the bottom of the tank (container). Locate the damaged wheel among the 4 wheels present under the tank. Gently pull or unscrew the defective wheel (depending on the fastening system). Insert the new directional wheel into its housing by pushing it until it clicks into place. Check that the wheel turns freely in all directions. Reassemble the vacuum cleaner in its normal position and briefly test it without loading the tank. If you do not have the three drain screws (reference 9110398540) to easily access under the tank, you can remove them by unscrewing. Otherwise, simply tilting the device is usually sufficient to replace a wheel. If the problem persists after replacement or if other wheels show signs of wear, replace all 4 wheels to ensure optimal stability and avoid uneven wear of the device. For any questions or if you are not comfortable with the handling, contact customer service: 0800 919270 (France) or grizzly@lidl.fr .

Q: What should I do if my PARKSIDE PWD 25 C4 vacuum cleaner won't turn on despite a properly checked outlet and filter?

If your PARKSIDE PWD 25 C4 vacuum cleaner won't turn on while the power outlet and filter are correctly in place, here are several steps to check to identify and resolve the issue: 1. Check the power cord Inspect the cord for any cuts, wear, or visible damage. A damaged cord may prevent the vacuum from receiving electricity. 2. Check the power button Make sure the power switch is in the "ON" position. Check that it is not stuck or defective. 3. Remove accessories Remove brushes or other removable accessories. Try turning the device back on without these accessories, as improper assembly may prevent it from starting. 4. Check for overheating If the vacuum has been used for a long time, it may have shut off automatically to prevent overheating. Allow it to cool down for at least 30 minutes before attempting to turn it back on. 5. Check the fuse Some models have a protective fuse. Check if it is blown and replace it if necessary. If after all these checks your vacuum still does not work, there may be an internal problem requiring professional repair.

Models PARKSIDE Vacuum Cleaner most viewed

User manual PARKSIDE Vacuum Cleaner : user manuals and guides in PDF

Models PARKSIDE Vacuum Cleaner most viewed

Other categories PARKSIDE

Recent questions about Vacuum Cleaner PARKSIDE