PNTS 1400 C1 - Vacuum Cleaner PARKSIDE - Free user manual and instructions

Product Type	Wet/Dry Vacuum Cleaner
Model	PNTS 1400 C1
Brand	PARKSIDE
Power Consumption	1400 W
Voltage	220-240 V ~ 50/60 Hz
Protection Class	Class II
Tank Capacity	20 L
Max. Airflow	240 m³/h
Blower Function	Yes
Integrated Socket	Yes, with automatic start
Suction Hose Length	1.8 m
Power Cord Length	3 m
Weight	5.5 kg
Dimensions (W x H x D)	400 x 400 x 500 mm
Noise Level (LpA)	76 dB(A)
Filter Type	Cartridge filter (washable)
Foam Filter	Included for wet vacuuming
Safety Features	Overheating protection, drip-proof motor head
Maintenance	Clean filter after each use; rinse tank regularly
Spare Parts Available	Filter, hose, nozzles, foam filter
Application	Household, workshop, car cleaning

Frequently Asked Questions - PNTS 1400 C1 PARKSIDE

What is the power of the Parkside PNTS 1400 C1 vacuum cleaner?

The PNTS 1400 C1 has a 1400 W motor, providing strong suction for both dry and wet debris.

Can it vacuum water?

Yes, it is a wet/dry vacuum. Use the included foam filter when vacuuming liquids. Ensure the cartridge filter is removed or dry.

How do I clean the filter?

Clean the cartridge filter by tapping it gently or rinsing with water (allow to dry completely). The foam filter should be hand-washed and dried.

What is the tank capacity?

The tank has a capacity of 20 liters for both dry and wet waste.

Does it have a blower function?

Yes, the blower function is activated by connecting the hose to the blower port, useful for clearing leaves or sawdust.

How long is the power cord?

The power cord is 3 meters long, giving you a good working radius.

Is the Parkside PNTS 1400 C1 suitable for car cleaning?

Yes, it comes with nozzles designed for crevices and upholstery, making it ideal for vehicle interior cleaning.

How do I use the automatic socket?

The integrated socket allows you to connect a power tool. The vacuum will start automatically when the tool is turned on (max load 2000 W).

What is the noise level?

The noise level is approximately 76 dB(A), which is typical for a vacuum of this power class.

Where can I get spare parts?

Spare parts such as filters, hoses, and nozzles are available from Parkside or online retailers. Check the user manual for part numbers.

USER MANUAL PNTS 1400 C1 PARKSIDE

Translation of original operation manual

HU

SZÁRAZ-NEDVESPORSZÍVÓ

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

PL

GB Translation of original operation manual Page 4

General description......5

Delivery Contents......5

Overview....5

Description of operation......6

Technical data......6

Safety information......6

Symbols used in the instructions .....6

General notes on safety 6

Assembly....7

Operation 8

Switching on/off......8

Dry vacuuming 8

Wet vacuuming 9

Blow Function....9

Cleaning/Maintenance......9

Trouble shooting 10

Storage....10

Disposal/Environmental protection ....10

Replacement parts/Accessories ..11

Guarantee 12

Repair Service....13

Service-Center....13

Service Branch 13

Translation of the original EC declaration of conformity......80

Exploded Drawing 83

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product.

During production, this equipment has been checked for quality and subjected to a final inspection. The functionality of your equipment is therefore guaranteed. It cannot be ruled out that residual quantities of water or lubricants will remain on or in the equipment/hose lines in isolated cases. This is not a fault or defect and it represents no cause for concern.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal.

Before using the product, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified.

Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Application

The appliance is intended for domestic wet and dry vacuuming in, for example, the house, work room, car or garage.

This equipment is not suitable for commercial use. Commercial use will invalidate the guarantee.

Vacuuming of flammable or explosive materials or those which endanger health is prohibited. The manufacturer will not be held responsible for injuries resulting from use which does not comply with the directions, or from incorrect use.

General description

The illustration of the principal functioning parts can be found on the front and back foldout pages.

Delivery Contents

Unpack the equipment and check that it is complete.

The equipment is supplied with the motor head on (see A 3). To take off the motor head and remove the accessories, release the locking lever (A 14) can fold down the bow handle tie bars (A 2) towards the suction nozzle (A 8).

• Motor housing
• Stainless steel container
• Bow handle
• Cable holder
• 4 steering castors with attachment ports for accessories
• Telescopic suction pipe
• Suction hose
• Handle with air regulation
• Foam filter
• Fluted filter with filter cover (already mounted)
• Paper filter bag
• Switchable household nozzle
• Crevice nozzle
• 8 cross-head screws
• Instruction Manual

Dispose of the packaging material in a proper manner.

Overview

Housing

Bow handle

2 Bow handle tie bars
3 Motor housing
4 Cable holder
5 Mains power cable
6 On/off switch
7 Vent holes
8 Suction connection
9 Stainless steel container

10 Drainage outlet
11 4 steering castors
12 Anti-static chain (not visible)
14 Locking lever
15 Blow connection
16 2 attachment ports
17 Telescopic suction pipe

13 4 attachment ports for accessories

Accessories

18 Vacuum tube holder
19 Suction hose
20 Handle with air regulation

Filter

21 Foam filter for wet vacuuming 22 Filter cover
23 Fluted filter for dry vacuuming
24 Paper filter bag for vacuuming both large and small dirt particles

Nozzles

25 Switchable household nozzle
for vacuuming carpets for vacuuming smooth surfaces

26 Crevice nozzle

27 Filter basket

Description of operation

The equipment is fitted with a stable stainless steel container to hold liquid and dust. The steering castors allow for maximum mobility of the device. For wet vacuuming, the suction airflow is switched off by a float when the stainless steel container is full. The equipment also has a blow function. To prevent electrostatic charging during vacuuming, an anti-static chain is fitted on the bottom of the equipment. The following describes the function of the operating parts.

Technical data

Rated voltage .... 230-240 V\~, 50 Hz Rated power input (Power consumption)....1400 W Cable length....4 m Safety class....□ II Protection category....IP24 Suction force....16 kPA, (160 mbar) Stainless steel container capacity brutto.... approx. 23 l useful volume....approx. 15 l Weight (incl. all accessories)....7.7 kg

Technical and visual modifications may be carried out due to further development without prior notice. All dimensions, information and statements provided in these Operating Instructions are therefore subject to amendment. Legal claims which are based on the Operating Instructions can therefore not be recognised.

Safety information

Symbols used in the instructions

Hazard symbols with in- formation on prevention of personal injury and property damage.

Precaution symbol with information on prevention of harm / damage.

Notice symbol with information on how to handle the device properly.

General notes on safety

Caution! When using electrical machines, observe the following basic safety measures for the prevention of electric shocks and the risk of injury and fire:

To avoid accidents and injuries:

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Never leave a machine which is ready for operation unattended at the workplace.
  • People and animals must not be vacuumed with the machine.
• Do not aim the suction hose and nozzle at yourself or others during use,

particularly not at the eyes and ears; there is a risk of injury.

- Do not vacuum any hot, incandescent, flammable, explosive materials, or those which endanger health. This includes hot ashes, petrol, solvents, acids or caustic solutions. Personal injury could occur.

- Nozzles and suction tubes must not reach head level whilst in use. Personal injury could occur.

To avoid accidents and injuries from electric shocks:

• Ensure that the mains cable is not damaged by being pulled over sharp edges, by jamming, or by pulling on the cable.
• Before each use, check the power supply lead and the extension cable for damage and ageing. Do not use the equipment if the cable is damaged or worn. Danger of electric shock hazard.
• If the power cable for this equipment is damaged, it must be replaced by the manufacturer, a customer service agent of the same or a similarly qualified person in order to prevent hazards.
• Switch the machine off and pull the plug under the following circumstances:
• when you are not using the device,
• transporting it or leaving it unattended;
• when you are checking the device, cleaning it or removing blockages;
• when you are carrying out cleaning or maintenance work or replacing accessories;
• when the power or extension cable is damaged; after contact with foreign bodies or in case of abnormal vibration.

- Do not use the cable to pull the plug out of the socket. Protect the cable from

heat, oil, and sharp edges.

• Make sure that the mains voltage corresponds with the information on the rating plate.
• Only plug the appliance into a socket which is safeguarded by at least 16 A.
• For use in a humid environment (e.g.: in a bathroom) and when wet vacuuming, plug into a socket with a residual current safeguard device (circuit breaker) with a rated residual current of no more than 30 mA

The following states how damage to the appliance and possible injury to people can be avoided:

• Ensure that the machine is correctly assembled and the filters are in the correct position.
• Do not use without the filter. This could damage the machine.
• Only use replacement parts and accessories delivered and recommended by our Service Centre (see "Replacement parts/Accessories"). The use of parts by other manufacturers immediately renders the guarantee void.
• Only have repairs carried out at our authorised customer service points.
• Observe the instructions for cleaning and maintenance of the machine.
• Store the appliance in a dry place and out of reach of children.

B

Assembly

Pull out the mains plug. Danger of electric shock.

1. Place the 4 steering castors (11) onto the mounts on the stainless steel container (9). Attach each steering castor with a crosshead bolt (11a).

2. Fit the bow handle (1) onto the two

GB

bow handle tie bars (2) and screw it in place with 2 crosshead bolts (1a).

1. Fold down the bow handle (1) towards the suction nozzle (8). Place the motor head (3) on the stainless steel container (9). Close the stainless steel container by folding up the bow handle and fixing it with the locking levers (14) (the tension can be adjusted with the locking lever adjusting screw). Several positions are possible for the bow handle.

Never vacuum without a filter!

1. Fit the power cable holder (4) onto the motor head (3) and screw it in place with 2 crosshead bolts (4a).

2. Fit the accessories:

3. Connect the suction hose (19).

4. Fit the handle (20)
5. Fit the telescopic suction pipe (17). (Press the knob on the telescopic suction pipe in the direction and separate to the desired length).
6. Fit the desired nozzle (25/26).

To store the suction set during breaks, push together the telescopic suction hose (17) and plug the suction pipe holder (18) into the socket on the motor housing (see picture B below).

Operation

Switching on/off

Connect the mains plug.

Do not vacuum without a filter! to insert the filter is described in the chapters "dry vacuuming" and "wet vacuuming").

Switching On:

On/Off Switch (see A 6) In position "I"

Switching Off:

On/Off Switch (see A 6) In position "0"

Dry vacuuming

Vacuuming with a fluted filter:

1. For dry vacuuming, fit the fluted filter (23) onto the filter basket (27) on the motor head (3). The sealing lip that curves upward must point away from the motor head.

2. Fit the filter cover (22) and lock it with a light turn:

Lock the filter cover

Unlock the filter cover

Vacuuming with the paper filter bag:

To avoid the fluted filter becoming clogged, we recommend the additional use of a paper filter bag.

1. Fit the fluted filter (23).
2. Fold the side flaps on the paper filter bag (24) down on the perforation.
3. Completely unfold the paper filter bag (24) and pull it over the internal suction nozzle (8) in the stainless steel container (9). The connector on the suction nozzle must be completely enclosed by the sealing ring on the filter bag opening.

A fine dirt filter bag made of micro filter fleece is also optionally available, which can be used in place of the included paper filter bag (see "Replacement parts/Accessories").

Vacuuming with the dry filter (filter bag, optionally available):

The anti-tear filter bag, which is optionally available (see "Replacement parts / Accessories"), is suitable for vacuuming both large and small dirt particles.

1. Place the foam filter (A 21) on the filter basket (D 27) (see "Wet Vacuuming").
2. Pull the fabric bag over the filter basket.

Wet vacuuming

For wet vacuuming or to vacuum water, fit the foam filter (21) to the filter basket (27) on the motor head (3).

To avoid tearing the foam filter (21):

• Use only a dry filter;
• Turn over the edge of the filter a little.

When the container (9) is full, the suction opening is shut off by a float, and suction is then cut off. Switch the appliance off, remove the plug from the socket and empty the container (see "Cleaning/Maintenance").

If foam or liquid exits, switch off the machine immediately.

Blow Function

Operation without the use of a filter is recommended.

- Connect the suction hose (19) to the connecting blower (15) on the motor head (3).

Cleaning/Maintenance

Pull out the mains plug. Danger of electric shock.

Always check the appliance before use for any obvious faults such as a defective mains cable, and have these repaired or replaced.

Cleaning the device:

Never hose the device down with water. Never use aggressive cleaning agents or solvents. This could damage the appliance.

- After use, empty the stainless steel container (9):

- Opening the drain plug to allow the vacuumed liquid to drain out (A 10). A liquid residue remains in the container.

To remove all residual liquids, fold down the bow handle (1) and take off the motor head (A 3): fix the bow handle with the locking levers (14), hold the stainless steel container (9) with one hand on the bow handle and the other on the bottom of the container and pour out the residual liquid.

• Clean the waste tank with a damp cloth.
• Wash the foam filter ( A 21) with luke-warm water and soap, and allow to dry.
• Beat the dust out of the fluted filter (A 23) and clean it with a paint brush or hand brush.

- Replace the paper filter bag ( A 24) when full (see "Replacement parts/Accessories" for reordering)

- Knock the optional dry filter (fabric bag) out. Where necessary, wash with lukewarm water and soap, and allow to dry.

Storage

1. Release both locking levers

(A 14) can fold down the bow handle (1).

1. Wind the power cable (5) around the power cable holder (4).

2. The attachment ports (13/16) serve to store the telescopic suction hose (17), suction hose (19) and nozzles (25/26).

3. Store the appliance in a dry place and out of reach of children.

Disposal/Environmental protection

Be environmentally friendly. Return the tool, accessories and packaging to a recycling centre when you have finished with them.

Machines must not be disposed of with household refuse.

Take the machine to a recycling point. The waste plastic and metal parts can be separated, accurately graded and passed on for recycling. Contact our Service Centre for more details. Defective units returned to us will be disposed of for free.

Trouble shooting

Problem Possible cause Fault correction
Device does not start	Mains voltage is not present
	Defective on/off switch (A 6)
	Worn carbon brushes
	Defective motor
Low or lack of suction	Hose system (A 19) or jets (A 25/26) blocked
	Suction pipe (A 17) assembled incorrectly
	Container (A 9) open
	Container (A 9) full
	Filter (A 21/23/24) full or clogged

Replacement parts/Accessories

You can order replacement parts directly via our Service Centre (see page 46). Please state the appliance type when placing an order.

Item Description Product No.

17/18	Telescopic suction pipe	91099003
19	Suction hose	91099004
20	Handle with air regulation	91099006
21	Foam filter, pack of 3	30250101
23	Fluted filter without filter cover, with steel inner mesh	91099009

24 Paper filter bags, pack of 5 30250133

25	Switchable household nozzle	91099008
26	Crevice nozzle	91099005

Optionally available:

Description Design Use Product No.

Fluted filter with filter cover	Without steel inner mesh			91092030
Fine dirt filter bag 30 l, pack of 5	2-layer micro filter fleece, white			30250110
Dry filter Blue fabric bag, washable				30250131

Guarantee

Dear Customer,

This equipment is provided with a 3-year guarantee from the date of purchase. In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.

If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The guarantee applies for all material and manufacturing defects. This guarantee does not extend to cover product parts that are subject to normal wear and may therefore be considered as wearing parts (e.g. filters or attachments) or to cover damage to breakable parts (e.g. switches, batteries, or parts made of glass).

This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided.

The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure efficient handling of your query, please follow the directions below:

• Please have the receipt and item number (IAN 89964) ready as proof of purchase for all enquiries.
• Please find the item number on the rating plate, an engraved plate on the front page of your manual (bottom left) or as a sticker on the back or bottom.
• Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.

- After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you.

We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect.

Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.

We will dispose of your defective devices free of charge when you send them to us.

Service-Center

Service Great Britain

Tel.: [phone]

(£ 0.10/Min.)

E-Mail: [e-mail]

IAN 89964

Service Branch

Please note that the following address is not a service address. Please initially contact the service centre specified above.

DES UK Ltd.

Unit B7

Oxford Street Industrial Park

Vulcan Road

Bilston, West Midlands WV14 7LF

Spis tresci

Wstep 14

Przeznaczenie....14

Opis ogólny....15

Service-Center......57

Service-Center......68

Service-Center....79