What should I do if my PARKSIDE PGKGA 40Li B2 tool does not start?

Question

Accepted Answer

Your PARKSIDE PGKGA 40Li B2 multifunction garden tool uses two 40 V Li-ion batteries to operate. If the device does not start, it is important to check several elements because the device will not start if one of the two batteries is depleted.

Start by checking the status of your two batteries. Ensure that each is fully charged using the provided charger (PLG20A3 or PLG20A1). You can check the charge level by pressing the charge indicator button (28) on the device: the LED indicators will show you the status of each battery. If only one battery is discharged, recharge it before trying again.

Next, make sure that both batteries are properly inserted. To insert a battery, push it along the guide rail until you hear a click. Check that the battery contacts are clean and free of corrosion or dust. If you do not hear the confirmation click, remove the battery and try again, ensuring it is aligned correctly.

To start the device correctly, first press the safety switch (29) while holding down the on/off button (30). You can then release the safety switch. This two-step procedure protects the user against accidental starts.

If the device still does not start, check that the on/off switch (30) is not damaged. Also, try letting the tool return to room temperature if you had exposed it to extremely low or high temperatures. If all these checks do not resolve the issue, it is possible that the motor is defective and requires repair by the authorized PARKSIDE service center.

User manual PARKSIDE Cordless multifunction garden tool : user manuals and guides in PDF

Models PARKSIDE Cordless multifunction garden tool most viewed

Other categories PARKSIDE

Recent questions about Cordless multifunction garden tool PARKSIDE