User manual PARKSIDE Screwdriver : 52 free PDF user manuals

Q: Is the PLG 20 X 20V TEAM charger compatible with the PABS 14.4 A1 battery?

No, the PLG 20 X 20V TEAM charger is not compatible with the PABS 14.4 A1 battery. Your PABS 14.4 A1 battery (14.4 V) requires a charger from the Parkside X 20 V TEAM range. The PLG 20 X 20V TEAM model does not appear in the list of recommended chargers. The chargers compatible with your battery are: PLG 20 A1 PLG 20 A3 PLG 20 A4 PLG 20 C1 PLG 20 C3 PDSLG 20 A1 SmartPLGS 2012 A1 Important: The manual states that batteries from the Parkside X 20 V TEAM range must only be charged with chargers belonging to the Parkside X 20 V TEAM range . Using a non-compatible charger may damage the battery or create a safety hazard.

Q: How to adjust the torque on the PARKSIDE PABS 20-Li I9 drill driver?

The PARKSIDE PABS 20-Li I9 drill driver has 18 adjustable torque settings (plus one special setting) to adapt the tightening force according to your needs. Torque adjustment procedure: Locate the torque selector : It is in the form of a rotating ring located at the base of the drill chuck, marked with numbers from 1 to 18 and a special symbol. Turn the selector to choose the desired torque level: Settings 1 to 6 : low torque, ideal for delicate screws, soft materials, or finishing work Settings 7 to 12 : medium torque, suitable for standard screwing into wood and common materials Settings 13 to 18 : high torque (up to 28 Nm maximum), for thick screws and heavy-duty work Special setting : use as a drill (without torque limitation) Test first on a test piece before starting your work, especially if you are not familiar with the exact material. This simple selection allows you to avoid damaging screws or fragile surfaces by precisely controlling the applied force.

Q: Which charger should I use for the PARKSIDE PABS 14.4 A1 drill?

For your PARKSIDE PABS 14.4 A1 drill, you should use a charger from the Parkside X 20 V TEAM range. The 14.4 V lithium-ion battery can only be charged correctly and safely with chargers specifically designed for this range. Recommended charger models: PLG 20 A1 PLG 20 A3 PLG 20 A4 PLG 20 C1 PLG 20 C3 PDSLG 20 A1 These chargers are designed to deliver the appropriate voltage and optimal charging current for the 14.4 V batteries in this range. Using an incompatible charger or a non-certified universal charger could damage the battery, reduce its lifespan, or create a risk of overheating. To find the right charger for your needs, you can consult the complete compatibility list on the website www.lidl.de/akku or from official Parkside retailers. Just make sure that the chosen model belongs to the X 20 V TEAM series and matches your battery voltage (14.4 V).

Models PARKSIDE Screwdriver most viewed

User manual PARKSIDE Screwdriver : user manuals and guides in PDF

Models PARKSIDE Screwdriver most viewed

Other categories PARKSIDE

Recent questions about Screwdriver PARKSIDE