6906000 - Workbench WOLFCRAFT - Free user manual and instructions

Product type	Multifunctional workbench (saw table, routing table, workbench)
Brand	Wolfcraft
Model	6906000 (MASTER cut 1500)
Dimensions (assembled)	780 x 520 x 863 mm (L x W x H)
Dimensions (folded)	1335 x 520 x 260 mm
Work surface	780 x 500 mm
Weight	17 kg
Max load	200 kg
Max cutting height (circular saw)	60 mm (with blade ≤200 mm)
Max cutting width (with parallel guide)	375 mm
Clamping hole diameter	20 mm
Compatible tool power supply	230 V / 50 Hz, max power 2760 W (via integrated safety switch)
Main functions	Stationary circular saw (blade ≤200 mm), jigsaw, routing table (with accessory ref. 6901000), workbench with vise and clamps
Included equipment	Vise, angle stop (0-65°), parallel stop, protective cover with dust extraction, safety switch, height-adjustable machine platform, push stick, 4 clamping brackets, Allen key
Optional accessories	Additional riving knife (ref. 6903000 for blade ≤160 mm, ref. 6904000 for blade ≤200 mm), parallel routing stop (ref. 6901000), roller stand (ref. 6119973)
Maintenance and cleaning	Clean after use, check screws regularly for tightness, do not use outdoors in rain
Safety	Protective cover, safety switch, angle and parallel stop, locking clamp, riving knife mandatory for circular saw
Materials	Aluminum (work plate), steel (frame)
Warranty	10 years (upon presentation of invoice)
Standards	CE, DIN EN 60745-1, DIN EN 60745-2-5, DIN EN 60745-2-11

Frequently Asked Questions - 6906000 WOLFCRAFT

How to mount a circular saw on the MASTER cut 1500 workbench?

Open the machine platform by tilting it (figure 16). Place the saw in the middle of the saw slot, align it parallel to the slot, then fix it using the side stops and clamping brackets. Ensure the blade protrudes less than 20 mm above the front edge of the slot. Close the platform and insert the Allen key to lock it (figure 17).

What is the maximum load capacity of the workbench?

The maximum load is 200 kg evenly distributed over the work surface. Do not use as a ladder or scaffold.

How to fold and unfold the table for transport?

To fold, loosen the two locking levers, remove them, and tilt the table forward (the casters make transport easier). To unfold, hold the table, place a foot on the damper, and tilt backward until it engages. Reinsert the levers and tighten the handle screws.

Can I use a router on this workbench?

Yes, but only with the optional parallel routing stop (ref. 6901000). Use only 230 V routers with power ≤1800 W and cutter diameter ≤27 mm. Use the smallest possible support ring.

What types of circular saws are compatible?

Portable circular saws with a riving knife, blade diameter ≤200 mm, and cutting depth ≤70 mm. The base plate must match the dimensions shown (figure 18). Use only blades in good condition.

How to adjust the height of the machine platform?

Loosen the six lock nuts under the platform, then adjust the height with the six set screws so that the platform is flush with the work surface. Retighten all lock nuts before use.

What is the safety switch for?

The safety switch allows you to connect the power tool and operate it safely. It is equipped with a thermal circuit breaker (press after overload). Always use the locking clamp to keep the switch in the on position.

How to use the angle stop for bevel cuts?

Loosen the stop screw, set the desired angle between 0 and 65°, then retighten. Place the workpiece against the stop and push it toward the blade. The stop guides the workpiece in the guide groove and lifts the protective cover.

Where can I find spare parts or additional accessories?

Accessories such as riving knives (ref. 6903000, 6904000) or the routing stop (ref. 6901000) are available from your Wolfcraft dealer. For spare parts, contact Wolfcraft customer service (email: [e-mail]).

What materials can I work with this workbench?

Work is limited to wood and chip-forming plastics. Exception: with a jigsaw equipped with a suitable blade, you can work soft metals such as aluminum.

USER MANUAL 6906000 WOLFCRAFT

SW5
m = 311

5
0

• PLEASE NOTE: Do read all safety & other instructions that have come with the Master cut 1500 and with the power tools you use for work.
  Failing to observe the safety & other instructions may cause electric shocks, fire and/or severe injuries.
• Do keep the operating instructions for future reference in a safe place.

TECHNICAL DATA

dimensions (put up for use): 780 × 520 × 863 mm (width x depth x height)

dimensions (folded up): 1335 × 520 × 260 mm

worktop: 780 × 500 ~mm

maximum height of work piece: circular saw bench 60mm

maximum cutting width with parallel guide: circular saw bench 375 mm

diameter of the clamping holes: 20 mm

load-bearing capacity: 200kg

weight: 17 kg

SYMBOLS AND THEIR MEANING

Warning against a general danger

Do not use the machine for cutting firewood.

Read the instructions!

Use only hand circular saws with a maximum cutting depth of 70~mm

Goggles must be worn.

Use only saw blades with a maximum diameter of 200mm for your hand circular saw.

Hearing protection must be worn.

Set the cutting depth of your hand circular saw before every cut in such a way that the saw blade does not protrude more than 4mm from the work piece.

Dust mask must be worn.

Use only hand circular saws with a riving knife.

Pull the plug.

Use only machines with a maximum output of 2760 W.

General information

The pictogram indicated refers to the machine plate dimensions of the circular hand saw (smaller or larger base plate dimensions).

ASSEMBLY TOOLS

1 allen wrench: SW 5 (included in the scope of delivery)

2 screw drivers: PH 1, PH 2 (not included in the scope of delivery)

3 hexagon wrenches: SW 8, 10, 13 (not included in the scope of delivery)

INTENDED USE

The MASTER cut 1500 is a multifunctional work and machine table. It is suitable for:

• mounting a circular hand saw with riving knife on the machine plate with a max. 200 mm saw blade diameter and max. 70 mm cutting depth.
  Do not use saws with base plate dimensions greater than the maximum values indicated (see Fig. 18). It makes the MASTER cut 1500 a stationary circular saw bench.
• use as a circular saw bench for circular hand saws without a riving knife. Only in conjunction with separate riving knife accessory, art. no. 6903000 with max. 160 mm saw blade diameter and min. 2.4 mm cutting width.
• use as a circular saw bench for circular hand saws without a riving knife. Only in conjunction with separate riving knife accessory, art. no. 6903000 with saw blade diameters from min. 161 mm to max. 200 mm, a cutting width from min. 2.4 mm and a max. cutting width of 66 mm.
• use as a jigsaw table.
• use as a milling table only in conjunction with the parallel milling guide, art. no. 6901000 and for 230V routers with a maximum rating of 1800W . Do not use cutters with a diameter of more than 27mm !
• Use as a working table for machining workpieces (e.g. drilling, sanding, etc.).
• Observe the manufacturer's safety instructions for the machines used as well as the safety instructions for the machine table.
• When disposing of the MASTER cut 1500, please observe the local disposal regulations.

The user is liable for any damage or accidents resulting from improper use.

GB

GENERAL SAFETY INSTRUCTIONS

• Keep your workplace clean and well lit. Poor housekeeping or unlit working areas may result in accidents.
• Do not work with power tools in an explosive ambience, where flammable liquids are kept and where gas or dust occur. Power tools will generate sparks which might ignite the dust or vapours.
• Keep children and other persons off your workplace, while using power tools. When getting distracted you can lose the control over the equipment.
• The plug of the power tool must fit into the socket. The plug must not be tampered with. Do not use adapters together with grounded power tools. Unmodified plugs and matching sockets will reduce the risk of getting an electric shock.
• Keep power tools out of the rain and away from wetness. Water penetrating into a power tool will heighten the risk of getting an electric shock.
• When working with a power tool outside, use only extension cords that are suitable for outdoor use. Using an extension cord that is suitable for outdoor use will reduce the risk of getting an electric shock.
  If it is unavoidable to use a power tool in a wet ambience, use a residual-current circuit-breaker. It will reduce the risk of getting an electric shock.
  Take care of what you do and handle the power tool with care. Never use a power tool, when you feel tired or when you are under the influence of drugs of any kind or alcohol. One moment of inat-tentiveness while using the power tool can cause severe injuries.
• Do wear suitable personal protective clothing and equipment, such as hearing protection, goggles, dust masks while doing dust-generating jobs as well as protective gloves, when processing rough materials and when changing tools.
• Remove the setting tools or wrenches before switching on the power tool. A tool or wrench attached to a rotating part of the equipment may cause injuries.
• Wear suitable clothes, i.e. no loose garments or jewellery. Keep your hair, clothing and gloves away from rotating parts. Loose garments, jewellery or long hair may be caught by such rotating parts.
  Always use the protective hood with the dust extractor.
• Do not use power tools with a defective switch. A power tool that can no longer be switched on or off is dangerous and needs repairing.
• Keep unused power tools out of the reach of children. Do not allow persons using equipment which they are not familiar with it, or persons who have not read these instructions. Power tools pose a danger, when being used by inexperienced persons.
• Check before starting to work, whether equipment and tools function properly. Never work with damaged or blunt tools.
• Have your power tools only repaired by duly qualified personnel. Demand original spares, so that the safety of the power tool remains ensured.
• Pull the plug from the socket and/or remove the battery pack from the power tools before you change the setting of your equipment or before you replace any components. The unin-entional re-start of a power tool may cause accidents.
• Put up the machine table properly before installing the power tool. The table's safe assembly is vital to prevent it from collapsing.
• Attach the power tool safely to the machine plate before using it. If the power tool gets out of place on the machine plate, you may lose control of it.
• Put the machine table on a firm, plain and horizontal surface. If the machine table can shift or wobble, neither the power tool nor the work piece can be moved safely and steadily.
• Do not overload the machine table and do not use it as ladder or scaffolding. Excess loads or standing on the machine table can shift the table's centre of gravity upwards, so that it may topple over.
• Do not process any other materials than wood or easily machinable plastic. Exception: It is also allowed processing easily machinable metals (e.g. aluminium), but only with the jig-saw and a suitable saw blade
• Loose splinters, chips or similar residues must not be removed by hand from the area close to the running saw blade!
  The machines used must conform to DIN EN 60745-1. Equipment built after 1994 must bear the CE sign.
• Do not merely saw by hand without a guiding aid; use the parallel or the angle guide.
• Saw blades must not be slowed down by pushing from the side after the drive has been deactivated!
• Use the tools for their intended purpose only.
• Use only faultless saw blades; the base body must not be thicker and the width of the set of teeth not narrower than the thickness of the splitting wedge.
• Make regular checks, whether all screws are tightened firmly!
• Never use your workbench in an improper way or for purposes other than intended!
• Remove all objects from the workbench that are not required.
• Do not use the machine for cutting firewood.
• Do not use the machine table for cutting log wood.
  The power tools must only be switched on and off via the safety switch.
• Use only the switch clamp supplied to permanently fix the appliance switch in the „ON“ position.
  Always use a push stick when processing small or narrow work pieces.
• When not in use, hang the push stick on the bracket provided (Fig. 8).
• Make sure that the two swivelling brackets for securing the table legs are seated correctly with the safety bolts inserted in the holes in the side section and that the knurled screws are firmly tightened (Fig. 15.3).
• Before starting work, make sure that the hand-held circular saw, router or jigsaw is properly attached to the machine plate, the machine plate is safely arrested in the notch on the machine table and the Allen wrench is inserted for additional safety (Fig. 17.3).
• Do not use the machine outdoors in the rain.
• Observe the maximum permitted workpiece dimensions (see Technical data).

SAFETY INSTRUCTIONS FOR CIRCULAR SAWS

• Apart from these machine-specific safety instructions, do also observe the safety instructions for the hand-held circular saw you work with.
  Only use hand-held circular saws with splitting wedge, with a maximum saw blade diameter of 200 mm and a maximum cutting depth of 70 mm.
• Use only saws within the above maximum dimensions for the base plate (see Fig. 18).
• Use the circular saw bench only, when the protective hood is properly fixed.
  CAUTION: Make sure that the saw blade has been installed parallel to the opening in the saw gap and realign the hand-held circular saw, if necessary.
  Support long work pieces at the removal side, so that they rest in a horizontal position; e.g. with a wolfcraft roller trestle (Art. No. 6119973).
• Avoid overloading the hand-held circular saw.
• Do not use grinding pads.
• Use only recommended brands of saw blades and select them depending on the material to be sawn.
  DANGER: Keep your hands off the sawing area and the saw blade.
• Never reach under the work piece. The protective hood cannot protect you from the saw blade underneath the work piece.
• Adapt the cutting depth to the thickness of the work piece; less than a full tooth height should be visible under the work piece.
• Be always aware that the work piece can be caught by the running saw blade and hit the operator.
• A back stroke is the result of using the saw incorrectly and/or for a wrong application. It can be prevented by suitable precautionary measures, as described below.

G

• Keep the saw firmly with both hands and put your arms in a position, so that you can ab-sorb the back stroke forces. Always stand to the side of the saw blade; never align your body with the saw blade. In the event of a back stroke, the circular saw can jump back-wards, although the operator should be able to master the situation by taking suitable pre-cautionary measures.
• Should the saw blade be jammed or should you interrupt your work, always switch off the saw and keep it steady in the material until the saw blade has come to a standstill. Never try to remove the saw from the work piece or pull it backwards, as long as the saw blade is rotating, as this may result in a back stroke. Find out the reason why the saw blade is jammed and eliminate the cause.
  If you wish to re-start a saw that is still in the work piece, centre the saw blade in the saw gap and check. whether saw teeth might be blocked in the work piece. If the saw blade jams, it may free itself from the work piece or cause a back stroke during the re-start of the saw.
  Support large plates, in order to minimize the risk of a back stroke caused by a jammed saw blade. Large plates may bend under their own weight. Plates must be supported on both sides, both near the saw gap and at the edge.
• Do not use blunt or damaged saw blades. Saw blades with blunt or incorrectly set teeth will increase the friction at the narrow saw gap, cause the saw blade to jam and may result in a back stroke.
• Set and fix the cutting depth and the cutting angle before starting to saw. If the settings change during the sawing, the saw blade may get blocked and cause a back stroke.
  Take extra care when making a "plunge cut" into an existing wall or other concealed areas. The immersing saw blade may block in concealed objects and cause a back stroke.
• Always use the push stick when cutting slashes and joints, since the saw blade is not visible.

SAFETY INSTRUCTIONS FOR JIGSAWS

• Apart from these machine-specific safety instructions, do also observe the safety instruc-tions for the jigsaw you work with.
• Never work with a damaged jigsaw.
• Avoid overloading the jigsaw.

PLEASE NOTE: USE THE MILLING TABLE EXCLUSIVELY IN COMBINATION WITH THE PARALLEL MILLING GUIDE (ART. NO. 6901000)

SAFETY INSTRUCTIONS FOR ROUTERS

• Apart from these machine-specific safety instructions, do also observe the safety instrc-tions of the router you work with.
• Be always aware that the work piece may unexpectedly get out of control during the mill-ing process and strike back.
• Do not use the machine table for curved work!
  Therefore, carry out the milling work exclusively with the parallel milling guide (which is available as accessory under Art.-No. 6901000), in order to prevent back strokes and to protect your hands from touching the cutter.
  Observe the original operating instructions for the parallel milling guide (Art.-No. 6901000), in order to be able to install it correctly.
• Do not use routers with a rating of more than 1800 W and a voltage of more than 230 V.
• Do not use cutters with a diameter of more than 27mm
• Please observe that the feed must be against the cutter's direction of rotation.
• Select the spacer rings supplied in relation to the size of the milling tool. Safe work requires selecting the smallest possible spacer ring.
• Use only sharp and properly maintained milling tools that have been set in accordance with the tool manufacturer's instructions.
• Observe the data concerning the minimum/maximum speed and the direction of rotation indicated directly on the equipment and tools used, or on their packaging, or as detailed in the operating instructions.
• Please be aware that the improper use of milling tools, of work pieces and of the guiding devices for the work piece may cause dangerous situations.
• Keep your hands off the milling tool, when milling close to the guide.
• If possible, use table pressure shoes in addition to the parallel milling guide while milling.
• Support long work pieces on the removal side, in order to avoid dangerous situations that may be caused by the uncontrolled tilting of the work piece. The support must rest on sta-ble ground and have the same height as the machine table, e.g. the roller trestle (Art. No. 6119973).
• Do only process work pieces that, considering their weight, can be held and advanced safely by one person.
• Choose the correct speed that is appropriate for tool and work piece. Please refer to the operating instructions of your router for the correct speed parameters.
• Observe the admissible maximum dimensions for the work pieces (see Technical data).

SCOPE OF DELIVERY

Take the Master cut 1500 out of the cardboard box and check whether the contents are complete and all pictured parts are included (Fig. 1, Fig. 2).

BASIC ASSEMBLY

Installation of the table; Place the top section of the table on a flat, clean surface. Secure the front pair of legs and lower strut using all fixing parts as shown in the illustration. Make sure that the two locking levers are seated correctly in the retaining holes and both knurled screws are firmly tightened (Fig. 3.1). Then mount the rear pair of legs and the second lower strut. Secure the two cross struts to the front pair of fixed legs, then fold the rear pair of legs upwards and attach the other end of the two cross struts (Fig 3.2). Now attach the two cushion feet with wheels to the rear pair of legs as illustrated and the other two feet to the front pair of legs (Fig. 3.3).

CAUTION: Make sure that the fixing parts marked with an information symbol are only tightened to such an extent that the table can be folded up with minimal resistance. Always check that both safety brackets are engaged and both knurled screws are firmly tightened.

The table can now be set down on its legs.

CAUTION: Take care not to pinch your hands when folding up and unfolding the table or swivelling the machine plate.

Vice: Mount the vice to the machine table as illustrated. The vice can be mounted on the right or left side (Fig. 4).

Safety switch: Mount the safety switch to the machine table as illustrated (Fig. 5).

GB

Protective hood: Assemble the individual components of the protective hood first. Then slide the protective hood holder with the guide into the aluminium profile and tighten the two Allen screws using the Allen wrench (Fig. 6).

Switch clamp: Knot one end of the cord in the hole of the switch clamp and the other end with the protective hood holder (Fig. 7).

Push stick: Put the push stick on the holder (Fig. 8).

Angle guide: Mount the angle guide as illustrated (Fig. 9). The aluminium rail may have to be adjusted depending on the height of the workpiece. Vertical with a minimum workpiece height of 15mm (Fig. 9.1), horizontal with a maximum workpiece height of 15mm (Fig. 9.1). The angle guide directs the workpiece into the guide groove (Fig. 9.3).

Parallel guide: Mount the guide holder as illustrated (Fig. 10.1). Assemble the two screws and square nuts only loosely (10.2). Slide in the aluminium guide as illustrated and tighten the screws (Fig. 10.3). Then slide the parallel guide into the slot and tighten the knurled screw (Fig. 10.4).

CAUTION: Lock the machine plate: The Allen wrench is used to lock the machine plate and must be inserted in the table in the "lock" position as illustrated before starting work (Fig. 11).

Spacer rings: The two spacer rings are designed to increase safety during routing. Always select the smallest possible spacer ring for the cutter being used (Fig. 12).

Clamping claws: Insert the clamping claws in the predrilled holes and use in conjunction with the vice to secure your workpieces.

FOLDING UP AND UNFOLDING THE TABLE

CAUTION: Before folding up the table, always disconnect the mains plug and appliance inlet from the safety switch!

Folding up: Slacken both knurled screws enough to allow the two locking levers to be retracted and turned (Fig. 14.1). Then fold the table in the direction of the arrow. For your own safety, always rest your foot against one of the cushion feet as illustrated to ensure that the table cannot slip (Fig. 14.2). The wheels on the cushion feet are used to transport the table more easily (Fig. 14.3).

Unfolding: Hold the table securely with both hands and rest your foot against one of the cushion feet as illustrated (Fig. 15.1). Now tilt the table in the direction of the arrows in a single movement until it has unfolded completely (Fig. 15.2). Then push the front edge of the table down with one hand until the top section engages in position. Insert both locking levers into the holes and tighten both knurled screws (Fig. 15.3).

PREPARATIONS PRIOR TO INSTALLING MACHINES

CAUTION: The procedure for opening and closing the machine plate before starting work is described here and must be performed every time a machine is changed!

Opening the machine plate to install a machine; Remove the Allen wrench from the safety lock. Swivel both plastic levers upwards, hold the two levers and raise the machine plate slightly. Lift the machine plate in the direction of the arrow until it is vertical and slide forwards up to the guide. Then lay down the machine plate until it is resting safely on the table (Fig. 16).

CAUTION: When working with the machine plate, do not reach under the machine plate with your fingers (danger of injury).

Closing the machine plate after successful machine installation; Raise the machine plate slightly. Then push all the way back to the rear guide and raise to a vertical position. Hold the machine plate by the two plastic levers and tilt the machine plate in the direction of the arrow until it reaches engagement position. Engage the machine plate from above and close both plastic levers. Insert the Allen key back into the safety socket to lock the machine plate (Fig. 17).

ASSEMBLY OF THE HAND-HELD CIRCULAR SAW

Open the machine plate as shown in Fig. 16.

Suitable hand-held circular saws: Please refer to Fig. 18 for the maximum dimensions permitted dimensions of hand-held circular saws. Always use circular hand saws with a riving knife, max. 200mm saw blade diameter and max. 70mm cutting depth.

Assembly and alignment of the hand-held circular saw: Retract the protective pendulum hood on the hand-held circular saw and position the machine centrally over the saw gap. Release the cutting depth lock on the circular saw and set the machine to the maximum cutting depth (Fig. 18.2). Tighten the cutting depth lock again. Align the blade on the circular saw centrally and parallel to the saw gap.

CAUTION: Check the distance between the foremost tooth on the saw blade to the front edge of the saw gap. This distance must be less than 20mm

Assembly example for machines with smaller base plates.

After aligning the machine, attach the two side stops so that their surfaces are in full contact with the machine's base plate. Then attach the two clamping claws (Fig. 18.3). Secure one side of the base plate. Install the angle bracket with two side stops first. Make sure they are in full contact with the base plate. In the same way, install an angle bracket with two side stops on the opposite side. Attach the two clamping claws (Fig. 18.4). The two clamping claws must be installed as close to the longer side of the base plate as possible.

Assembly example for machines with larger base plates.

After aligning the machine, attach the two side stops so that their surfaces are in full contact with the machine's base plate. Then attach the two clamping claws (Fig. 18.5 c). Install the two side stops as close to the longer side of the base plate as possible (Fig. 18.5 d). Attach the angle bracket to a side stop using a screw, washer, lock washer and nut (Fig. 18.5 b). Then attach the clamping claws. In the same way, attach an angle bracket to a side stop on the opposite side using a screw, washer, lock washer and nut (Fig. 18.5 b). Finally, attach the clamping claws (Fig. 18.5 a).

GB

Close and lock the machine plate as shown in Fig. 17.

CAUTION: Make sure that the saw blade has been installed parallel to the opening in the saw gap and realign the hand-held circular saw, if necessary.

Connection with the power supply: Plug the appliance inlet of the hand-held circular saw into the safety switch and an extension cord leading from the safety switch to the mains socket outlet (Fig. 19.1). The extension cord is not included in the scope of delivery.

CAUTION: Press the thermostatic switch before operating for the first time! If the power is interrupted due to excess voltage, wait 5 - 10 min. and press the thermostatic switch. The ON switch can then be pressed (Figs. 19.2, 19.3).

Press the red button (OFF) on the safety switch. Then attach the switch to the hand-held circular saw (Fig. 19.4). Now press the green button (ON) and check that the saw blade rotates freely in the gap insert (Fig. 19.6), then press the red button (OFF) again (Fig. 19.7).

CAUTION: Always pull out the mains plug if the table is not in use or when folding up the table.

The MASTER cut 1500 is now ready for use.

STATIONARY SAWING WITH THE HAND-HELD CIRCULAR SAW

CAUTION: Always work with the protective hood and switch on dust extraction at the protective hood.

Sawing with the angle guide

Slide the angle guide into the slot (Fig. 20.1). Make sure that the black end of the stop runs as closely as possible under the protective hood so that the hood can be lifted (Fig. 20.2). Now retract the angle guide and rest the workpiece against the angle guide. Switch on the hand-held circular saw at the safety switch. Push the workpiece towards the circular saw in the direction of the arrow with one hand on the angle guide and the other hand on the workpiece as shown (Fig. 20.3) until the blade cuts all the way through the workpiece. Then switch off the hand-held circular saw using the safety switch.

CAUTION: Make always sure that your hands are kept at a sufficient distance from the rotating saw blade (danger of injury).

CAUTION: The length of the workpieces from the centre of the saw gap to the protective hood holder the must not exceed 330mm

The angle guide makes it possible to saw workpieces at angles ranging between 0^ and 65^ . Loosen the knurled screw, set the required angle and tighten the knurled screw firmly again (Fig. 20.4). You can now use the saw as shown in Fig. 20.1 to 20.3.

Sawing with the parallel guide

Insert the parallel guide with loosened knurled screw into the slot. Slide the parallel guide up to the protective hood. Make sure that the aluminium guide does not protrude beyond the last visible tooth on the circular saw blade (Fig 21.1). If it does, loosen the fixing screws, move the guide back slightly and tighten the screws again. Set the required cutting depth and tighten the knurled screw. Then switch on the hand-held circular saw at the safety switch. Push the workpiece towards the circular saw in the direction of the arrow as shown (Fig. 21.2) until the blade cuts all the way through the workpiece. Then switch off the hand-held circular saw using the safety switch. Always use the push stick included in the scope of delivery for narrow workpieces (Fig. 21.3).

CAUTION: The length of the workpieces must not exceed 375mm from the centre of the saw gap to the parallel guide and 330mm from the centre of the saw gap to the protective hood holder (Fig. 21.4).

Vertical litre cuts

The hand-held circular saw must be realigned for vertical mitre cuts. Set the required mitre angle on the hand-held circular saw. Retract the protective pendulum hood on the hand-held circular saw and position the machine centrally over the saw gap. Release the cutting depth lock on the circular saw and set the machine to the maximum cutting depth. Tighten the cutting depth lock again. Align the blade on the circular saw centrally and parallel to the saw gap (Fig. 22.1, 22.2).

CAUTION: Check the distance between the foremost tooth on the saw blade to the front edge of the saw gap. This distance must be less than 20mm (Fig. 22.3).

After aligning the machine, attach the two side stops so that their surfaces are in full contact with the machine's base plate. Then attach the two clamping claws (Fig. 22.4 a). Secure one side of the base plate. Install the angle bracket with two side stops first. Make sure they are in full contact with the base plate. In the same way, install an angle bracket with two side stops on the opposite side. Attach the two clamping claws. The two clamping claws must be installed as close to the longer side of the base plate as possible (Fig. 22.4 b). Note: With larger base plates, proceed as described on page 15 (Fig. 18.5). Check once again that the saw blade rotates freely in the saw gap (Fig. 22.5).

Close and lock the machine plate as shown in Fig. 17.

CAUTION: Make sure that the saw blade has been installed parallel to the opening in the saw gap and realign the hand-held circular saw, if necessary.

SAWING WITH THE JIGSAW

Align the jigsaw on the machine plate in such a way that the saw blade runs in the centre of the saw opening (Fig. 23.1). Install the jigsaw with four side stops and four claws as illustrated (Fig. 23.2). Close and lock the machine plate as shown in Fig. 17. Attach the switch clamp to the switch on the jigsaw and connect the appliance inlet to the safety switch. Always use the protective hood when operating the jigsaw (Fig. 23.3).

USE AS A WORKBENCH

The MASTER cut 1500 is equipped with 4 plastic clamping claws. They can be used to clamp workpieces flexibly and safely (Fig 24).

ADJUSTING THE MACHINE PLATE

The height of the machine plate in the worktop was set in the factory to ensure that the workpiece glides smoothly over the worktop and machine plate area. The height of the machine plate can be adjusted, if necessary. Loosen the six lock nuts. Align the height of the machine plate using the six adjusting screws until it is flush with the worktop and then tighten the lock nuts again. Before starting work, always check that the six lock nuts are fastened tightly. Also check that the screws and lock nuts on both holders for engaging the machine plate are always fastened tightly (Fig. 25).

SPECIAL ACCESSORIES FOR THE MASTER cut 1500

TWO EXTRA ATTACHABLE RIVING KNIVES, ART. NO. 6930000 AND 6904000 DESIGNED

FOR HAND-HELD CIRCULAR SAWS WITHOUT A RIVING KNIFE

CAUTION: The special accessories described here are only compatible with the MASTER cut 1500.

NOTE: The following section describes how this special accessory functions and is operated, and an illustration is included on page 24.

INTENDED USE

The two riving knives enable the operation of hand-held circular saws that have no riving knife.

Riving knife 6903000 is designed for hand-held circular saws with circular saw blades that have a maximum diameter of 160mm and a cutting width between 2.4mm and 2.8mm .

Riving knife 6904000 is designed for operating hand-held circular saws with saw blades that have a maximum diameter of 200mm , a cutting width between 2.4mm and 2.8mm and a maximum cutting depth of 66mm .

CAUTION: Before using the special accessories, always read the general safety instructions, the safety instructions for hand-held circular saws and the original instruction manual accompanying the hand-held circular saw without a riving knife.

RIVING KNIVES ART. NO. 6903000 AND 6904000

Riving knife 6903000 includes the following components: 1x riving knife (for a max. circular saw blade diameter of 160mm ), 1x riving knife holder (long version), 1x setting gauge (Fig. A).

Riving knife 6904000 includes the following components: 1x riving knife (for a max. circular saw blade diameter of 200mm ), 1x riving knife holder (short version), 1x setting gauge (Fig. B).

CAUTION: The following section describes how the riving knife (Art. No. 6903000) for hand-held circular saws with a max. saw blade diameter of 160~mm is assembled and functions.

The riving knife (Art. No. 6904000) for hand-held circular saws with a max. saw blade diameter of 200mm is assembled and functions in the same way. However, it is possible to machine workpieces with a max. height of 60mm using this riving knife.

ATTACHING RIVING KNIVES

Open the machine plate as shown in Fig. 16 (Fig. C.1). Assemble the locating bolt with the fixing parts. Assemble the components loosely (Fig. C.2). Close the machine plate (Fig. C.3). Insert the riving knife approx. 2cm into the groove on the locating bolt from above. Make sure that the riving knife is inserted in the direction of the arrow up to the stop on the machine plate as illustrated (= vertical direction). Tighten the Allen screw (Fig. C.4, C.5). Open the machine plate again (Fig. C.6).

ASSEMBLY OF THE HAND-HELD CIRCULAR SAW

Retract the protective pendulum hood on the hand-held circular saw and position the machine centrally over the saw gap. Release the cutting depth lock on the circular saw and set the machine to the maximum cutting depth. Tighten the cutting depth lock again.

CAUTION: Check the distance between the foremost tooth on the saw blade to the front edge of the saw gap. This distance must be less than 20mm

Align the front end of the hand-held circular saw with the 0 mark on the base plate of the hand-held circular saw and the two auxiliary marking lines on the machine plate. At the rear end of the hand-held circular saw, align the saw blade centrally in relation to the riving knife (Fig. D.1). Note: The best place to check whether the machine is aligned correctly is behind the riving knife in the direction of the circular saw blade because the saw blade is thicker than the riving knife. After aligning the hand-held circular saw, attach the two side stops so that their surfaces are in full contact with the machine's base plate. Then attach the two clamping claws (Fig. D.2).

CAUTION: Make sure that the saw blade is aligned centrally in relation to the riving knife, otherwise the hand-held circular saw must be realigned.

Secure another side of the base plate. Install the angle bracket with two side stops first. Make sure they are in full contact with the base plate. In the same way, install an angle bracket with two side stops on the opposite side. Attach the two clamping claws (Fig. D.3). The two clamping claws must be installed as close to the longer side of the base plate as possible. Note: Refer to pages 13 - 15 for other attachment options on a variety of base plates.

Adjust the safety distance between the riving knife and circular saw blade using the setting gauge.

Close the machine plate (Fig. E.1). Fit the individual parts to the riving knife as shown in the illustration (Fig. E.2). Tighten the screw and the knurled nut connected to the riving knife and loosely tighten the screw and knurled nut in the front of the housing (Fig. E.3). Loosen the riving knife fastening using the Allen wrench (Fig. E.4). Slide down the riving knife vertically in relation to the circular saw blade (Fig. E.5). Slide down the riving knife until at least one circular saw blade tooth reaches the housing of the setting gauge (detailed view E.6). Now tighten the front knurd nut (Fig. E.6). When the Allen screw is tightened, the safety distance between the circular saw blade and the riving knife is adjusted to max. 5 mm (Fig. E.7). Then unscrew the setting gauge from the riving knife (Fig. E.8).

CAUTION: Make sure that the saw blade is aligned centrally in relation to the riving knife (detailed view in Fig. E.8) and that the max. safety distance of 5 mm between the circular saw blade and riving knife is maintained (detailed view in Fig. E.6), otherwise the hand-held circular saw must be realigned.

CAUTION: Before starting work, always check that the riving knife and fixing parts are fastened tightly!

GB

Lock the machine plate as shown in Fig. 17. The table is now ready for stationary sawing, please also read the section on stationary sawing with the hand-held circular saw.

Cutting depth adjustment

If the cutting depth of the hand held circular saw is changed, the height of the riving knife must also be adjusted to guarantee the max. 5 mm safety distance to the circular saw blade. First loosen the riving knife using the Allen wrench. Then set the hand-held circular saw to the required cutting depth. Tighten the cutting depth lock again. Attach and position the setting gauge together with the riving knife as illustrated in Fig. E.1 to E.8.

Vertical litre cuts

The hand-held circular saw must be realigned for vertical litre cuts. Set the required litre angle on the hand-held circular saw. Retract the protective pendulum hood on the hand-held circular saw and position the machine centrally over the saw gap. Release the cutting depth lock on the circular saw and set the machine to the maximum cutting depth. Tighten the cutting depth lock again (Fig. F.1, F.2). Loosen the Allen key and turn the riving knife until it is positioned exactly central in relation to the circular saw blade (Fig. F.3).

CAUTION: Check the distance between the foremost tooth on the saw blade to the front edge of the saw gap. This distance must be less than 20 mm (Fig. F.4).

Tighten the Allen screw (Fig. F.5).

CAUTION: Align the saw blade parallel in the saw gap while ensuring that the circular saw blade is always positioned centrally in relation to the riving knife.

Attach the two side stops so that their surfaces are in full contact with the machine's base plate. Then attach the two clamping claws. Secure another side of the base plate. Install the angle bracket with two side stops first. Make sure they are in full contact with the base plate. In the same way, install an angle bracket with two side stops on the opposite side. Attach the two clamping claws. The two clamping claws must be installed as close to the longer side of the base plate as possible (Fig. G).

Adjust the safety distance between the riving knife and circular saw blade using the setting gauge.

Close the machine plate (Fig. H.1). Fit the individual parts to the riving knife as shown in the illustration (Fig. H.2). Tighten the screw and the knurled nut connected to the riving knife and loosely tighten the screw and knurled nut in the front of the housing (Fig. H.3). Loosen the riving knife fastening using the Allen wrench (Fig. H.4). Slide the riving knife towards the circular saw blade at the same angle as the saw blade (Fig. H.5). Slide down the riving knife until at least one circular saw blade tooth reaches the housing of the setting gauge (detailed view H.6). Now tighten the front knurled nut (Fig. H.6). When the Allen screw is tightened, the safety distance between the circular saw blade and the riving knife is adjusted to max. 5 mm (Fig. H.7). Unscrew the setting gauge from the riving knife again. Lock the machine plate as shown in Fig. 17 and check once again that the saw blade rotates freely (Fig. I).

CAUTION: Make sure that the saw blade is aligned centrally in relation to the riving knife (detailed view in Fig. 1) and that the max. safety distance of 5mm between the circular saw blade and riving knife is maintained (detailed view in Fig. H.6), otherwise the hand-held circular saw must be realigned.

CAUTION: Before starting work, always check that the riving knife and fixing parts are fastened tightly!

The table is now ready for stationary sawing, please also read the section on stationary sawing with the hand-held circular saw.

Warranty

Dear hobbyist!

You have purchased a high-quality wolfcraft® appliance, which we know you will enjoy using. wolfcraft® appliances are built to high technical standards, and undergo intensive development and test phases before leaving the factory. Constant controls and regular tests during their manufacture, ensure a high quality standard. Sound technical developments, and reliable quality controls warrant for the right choice of appliance.

We provide a warranty of 10 years from the day of purchase on the wolfcraft® product you acquired, provided it is exclusively used for DIY purposes. The warranty only covers damage to the item purchased, and only such damage that can be attributed to faulty material und poor workmanship. The warranty does not cover defects and damage that must be attributed to improper use or insufficient maintenance. Nor does the warranty cover the usual wear and tear as well as defects and damage, of which the customer has been aware when purchasing the equipment.

Warranty claims can only be asserted by producing the invoice or the till receipt.

The warranty granted by wolfcraft does not in any way restrict your statutory consumer rights (i.e. contract performance, withdrawal from the contract, price reduction, claims for damages or reimbursement of expenses).

Declaration of Conformity pursuant to Directive 2006/42/EC on Machinery, Annex II A

wolfcraft GmbH in D-56746 Kempenich, Wolff-Str. 1, hereby declares that this product (MASTER cut 1500) conforms to Directive 2006/42/EC on Machinery. TUEV Rheinland LGA Products GmbH, Tillystrasse 2, 90431 Nurnberg. BM: 60087567 0001 Conformity with the following standards: DIN EN 60745-1, DIN EN 60745-2-5, DIN EN 60745-2-11

Person authorized to sign the Declaration of Conformity and to compile the technical documentation. (Management/Technology/Logistics; wolfcraft GmbH)

INTRODUCTION

ATTENTION: assures you of always maintaining your homes.

MONTAGE DU COIN DE FENDAGE

Varning for all manna risker.

IpoeiOioiOn yiaKaTe YEVIKO KIVUVO

△aβατεις Μθηγεί

Ppeneva xpnoiopoiouvta yuaia npoatala

Ppene va xpaonoiouvtai wtoaoinie

Ppeneva xpnouonoeiata paoka npootaia

ByaTe a'tn npica

Tia yevikn pAnpOphiPOn

Mx npoonoeite to npxavna yia konm Euaia yia kaon

Xpoiopoioie anokkietika sikpiova xipoc epeyto 806 konr70x

XpnoiOeite anokkeiotka diokopiova xepoc je meyotn diapetpo diokou konc 200 xla.

GENEL EMNIYET UyarILARI

Rezani's paralelinim dorazem

3 chei inbus SW 8,10,13 (neinclusa in livhare)

UTILIZAREA CORESPUNZATOARE

TEXHNUECKHXAPAKTEPNCNIK

Pa3mepn pa3rha:780x520x863 MM (uipnHa x dbioyna x BucnHa)

Pazmepn npnbpaHa: 335 x 520 x 260 MM

Pabotha nnou: 780 x 500 MM

MaKc. BncounHa Ha TaaHa: HactoJenuPkyJrp 60 MM

MaKcmaJHa WnpHa Ha p3aHe c npaIeH BODa: npkynpeH nnot 375 MM

LJ6noHHaOTBOpHTe3a3TgraHe:20MM

Donyctmo HArOBaBe: 200 kg

Terno: 17 kg

CHMBOJIH 3HAUEHNE

PpeDynpKdHne 3a o6ua onacnoct

Ppoetete Hnctpykunnte/yka3aHnntal

Hocete npedna3n ounila!

Hocete aHTnΦoHn.

HocTe npoTHBnpaxOba Macka.

U3baTeTeekeepa

3a 067ua HnΦopMaun

He n3non3BaTte 3a p3aHe Ha DbPba 3a orpeB.

H3noJI3BaIe cAmo pUHH UHPKynpH C MaKcHMaHa DbI6OuHa Ha p3aHe OT 70 MM.

H3noJI3BaIe caMo pUHn UHPKynrnp C MaKcHmAnen DnaMeTbp Ha nncka ot 200 MM.

PpeHBCRAO P3AHE HACTPOBBAITEbIbOCHHa Hpa3aHe Taka, yepekeunrDnck da ce nodaba ot DetaiHa MaKcMAmHO 4 MM.

H3non3BaIte cAmo pBCHN CHPKynapc pa3dEnTeneH KINH.

H3non3BaIte cAmo MaunHH C MaKcMaHa MOUHOCT OT 2760 W.

CbOTBtHO 6o3aHaeHATA NIKTOrpama ce OTHAC 3a pa3MePHTe Ha onOpHATA NIOOHa HpbHnA UPKyIrp (NO-MaMKn CbOTB. NO-TOEMN pa3MePn Ha onOpHATA NIOOa).

HHCTPYMEHTN 3A MOHTX

1 KIOHAC BbTpweH WIEcTOrpaH3 SW 5 (Bn3a B oxbata Ha doctabkata)

2 OTBeptK:PH1,PH2 (HeBn3aR B06xBataHaNoCTaBkata)

3 WECTOCTEHeH KInou: SW 8, 10, 13 (HE BnnaB O6xBata Ha DoCTaBkata)

YIOTPEBA IIO IIPEDHA3HAUHHE

MASTERcut 1500 e MHOrofoyHKUHOHaHa Maca 3a pBua H MaunHpa bOta. Ta e noxdoa 3a:

MOHTANBpxyMaunHHnHnIOTHaPbUeHNzPkynpCHOH3aPa3KnHBAHeCMKmAHenDnAmeTpBnHaPekEuaN200mmMakcmHnHa 1b6OuHaHa p3a70 mm. H3noJ3BaTecmo zPkynp, uHrTO onOpHa nOoHa He npBnBaA NOcoEHnTE MAKcHMAHn pa3MePN (BK. fHr. 18). Pto TOnHauHnCe cONoynCTaONOHApEnzPkynp
- Ynotpe6a kato Maca 3a p'ueh upkyipb 63 kHn 3a paueBaHe. Camo B KOM6HaCn C KInn 3a paueBaHe kato OTdEHa npHaJnKHOCT Kat. N9 6903000 c MaKcmaIen dIaMeTp b Ha peKeuIg Dnck 160 mm m MmHaHa Ha prHa 2,4 mm.
YnOTpe6a KATO Maca 3a pTBHeu UHPKynRp 6e3 KINH 3a paueenBaHe. CaMO B KOMbHaunC KINH 3a pa3eBnBe H KATO OTdEHNpaHnA nHKeHCTN K. NO 6904000 c MAKcMAMnHn DnAmetpn Ha pekeu nnck ot 161 mm do MaKc.200 mm, MMmAnHa uHpHnHa Ha P3aHe 2,4 mm mAKcMAMnHa dIb6OumHa ha pr3aHe do 66 mm.
- YnTope6a KaTo Maca 3a BepTKKaenH TpNoH.
- Ynotpe6a kato Maca 3a φpe3a cMoB KOMbHaunC yCnpopeH orpaHHTen 3a φpe3a Kat. N9 6901000 n 3a o6epfpe3a c 230 V mAKCMyM 1800 W. He n3noJ3BaIe φpe3c dAmAetbp no-tolm ot 27 mm!
- Ynortpe6a kato paobtha Maca 3a o6paobKa Ha 3arOToBKn (Hanp. npo6nBaHe, nnaiFahe n dp.).
Tp6Ba da ce cna3Baat dAHnTe Ha npOn3BOaHTe H yKa3aHHTa 3a 6e30NaCHOCT 3a 3nON3BaHNTe MaHH, KaKTo n yKa3aHHTa 3a 6e30NaCHOCT 3a pa6oTHata Maca.
- PnH3xBpIHa HAMSTERcut 1500 cna3BaIte MeCTHHe pa3npoe6n 3a H3xBpIHa OtnaIbI.

IotpeBntenr HOCN OTROBOPHOCT 3a 1eTH N 3IonoIyKn, Bb3HKnHaiN BCJeCTBHe Ha yIOTpe6a He No IpEHa3HaueHne.

BG

OBUHNHCPTPYKUN3ABE3ONACHOCT

• PoiDpBkaHte BaWata paOHTa oNact YnCTa H Do6pe OCBTeHa. Be3npAdbKbT Nn HeOCBETHe Tpe a60THn 6nactn Morat da npeu3BnKaT 3NONONYK.
  He 3n03BaTe eKTPueeckn HNCTPmuNT BbB B3pHBOONACHa CpeDa, npu HAnuue He a 3aapanm TeUHOCTn, ra3OBe nI npaxoo6pa3HN MATEPAH. ENEKTpueeckte HNCTPmuNT OTDenr HCKPN, KOIO MOrAT Da Bb3PnAmeHr npaxoo6pa3HN MATEPAH NIN napH.
  -Дрьгтdeua nHn CTpaHnHn Hua dauee ot eEektpueckn HNCTpyMeH NO Bpe Me Ha paOta. OTKnoHraHeto Ha BHMaHHeTo MoKe Da DOBeDe do 3ary6a Ha KOHTpol Bbpxy eEektpueckn HNCTpyMeH.
• Ue nceIbHa 3apnHOTO yctpoCTBO Ha enektpueckn HcTpymeT Tp6Ba Da cB0tBeCTBA Ha KOHTa. B HmkaBb CnyaH He npomeHte KOHCTpykuneta Ha uenceLa. Korato paobnte cbc 3aemeHN (3aynen) eektpueckn HcTpyMeHn He 3no3BaTe aanTepe 3a ceela. N3no3BaHeTo Ha opRnHaHn Ie neCENn INoXoAun KOTAKTN HAmaJIra PnCKa OTKOB yap.
• Pnpnae eektpnueckn Hctpmert ot dbxnd Bnara. PpOHKBaHTo Ha Boda B eektpneckn Hctpyment nobuaba onachoctta
  Korato paobOTte c eneKTPnueckn HNCTpymEnH a OTKpHTo, nON3BaTe caMo YdbJNKeTHeHH Ka6JIe, KOHTo Ca npEHa3HaueHH 3a paObTa Ha OTkpHTo. NsON3BaHTo Ha yDbJNKeTHeHH Ka6e, npEHa3HaueHH 3a paObTa Ha OTKpHTo, hAmAnBa PnCKa oT KOKB Udap.
  Korato H3non3BaHTo Ha eEKeTpueckn HHTpymeHT BbB BnaJHa CpeJa He Moke Da 6Ie PpeDtBpateHo, H3non3BaTte 3aunTeH PpeKbcBaCpeu yTeueH ToK. H3non3BaHTo HA 3auHte HpeKcbCaU Cpeu yTeueH ToK HamanraPnCKa OT TKOB ynap.
  BbTe BHNMaTeHn, BHIMaBai Te KaBO npaHTe, NOxOJaTe C paaym KbM pabOTa c EneKTPnEckn HNCTpyMeT. He n3oN3aIte ENEKTPnEckn HNCTpyMeT, KOATO CTy MOpEn HN CE HAmpTa e NO B3JeCTBHeTo H YAIOBaUcn CpedCTBa, AIKOXOI INH MeINKaMeHTn. EINH MOMeHT Ha HEbHMaHHe Prn IINON3BaHTo H EAENKTPnEckn HNCTpyMeT MoKe JDoDBeDE O CePN03Hn HapAHBBaHn.
  Hocete noxdxodn nyn npedna3n cpectBa: aHTNFOHN, npedna3H ouHa, npoTBO npaxoBA macka npi pa60tn, npi konTO ce o6pa3yBa npax, 3aunTHn pkaBnnpn o6pa60TKa Ha rpybNOBpXHOCTn npn CMHa HNCTpyMeHTn.
• Otrtpahe HNCTpymeHTte 3a HactpoKa HnraeHn KIOObe npedn da BkIOUHTe eEeKTPueckn HNCTpymeHT. HNCTpymeHT nnn KIOU, KOITo Ce HAmpa BbB BbPTAa ce qact Ha NCHTpymeHTa, MoKe da npednBnKa HapaHBaHH.
  HocTe noXoHaIO o6NeKIO. He HocTe 0nPOKO 6NeKIO nIi HaKTH. DpBkTe KOCHTe CN, 6NeKlOTo n PbKaBUNITE Cn daneue ot DBNKeUITE CE qactn. Cbo6OHDTo 6NeKIO, HAKHTe IIN Dblrnte KOCH Morat Da 6bDat 3axBaHATOn OT DBNKeUITE CE qactn.
  BnHaHn H3non3BaTe npedna3nte n C ekctpaKtopa 3a npax.
  He H3noIbAte enektpnueckn HNCTpyMeH, YHTo npeBknIOBaTe e deFeKeTHe. EneKTPnueckn HNCTpyMeHT, KOTo He MoKe da Ce BKnIOBa H3KNHOBA, e ONaCeh N Tp6Ba Da 6bDe pemOHnpaH.
  CbXpAHBaIe ENKTPMueCKHe HCTpyMeHn, KOTo He n3non3BaTe, H3bH DoctbNa Ha Deua. He No3BONBAIte Ha Nua da pa6oTc C eNKTpuEckn HHTpyMeHn, KOTo He ca 3aNo3HaTc Hero nn He ca npOehn Te3n HCTpyKuH. EneKtpuecknte HCTpyMeHn ca OaCHn, KOrato ce pONBAT ot HeobyeuHn Nua.
• Ppei 3aOnuBaHe Ha pa6oTa npOBepTe DaIy ypeDITE HnHCTpyMeHTte pa6oTt. He pa6oTe TE HNKORA c NOBpeDEHN IIN IIN 3xa6EHN INCHpymeHTN.
  B3naIepMOHTHa cB0e nEeKtpueeCKn HNCTpyMeHcMo Ha KBaIIINpHaPcH CneuaIIINpHa NepcoHa. KaTO ce H3no13BaT cMo opRHHnpe3epBNuactn. CToBa Ce rapaHTnpa, ye 6e3onacHOCTTa Ha eNEeKtpueeCKn HNCTpyMeHt ue bDe 3ana3ea.
• 3BaTe uekepa ot KOhtakTa /nHn akyMnyatopa ot en.HCTpyMeHT. npei Da HapbaHTe HaCTpOKn Hn da CMeHnte npHaJNeXHOCTN. HeBONHO TO BkIOUyBaHe e npuHa 3a 3IOnoLyKN.
• PnpaHnHa MoHTpAte en. HCTpyMeHr Cnlo6e TpaBnHO MaCATA Ha MaunHata. PpaBnHTo CrNo6BaHe e BaXHo 3a npedotbpaTBAhe Ha naHaHe.
  3akpenete cnypno en. nHctpymeHT ha nnota ha Maunnata, npen da ro n3non3bate. nIb3raHTo Ha en.nHCTpymEn Bbpxy nIOT Ha Maunnata MOKe da doBepe Do 3ary6a Ha KOHTpol.
  CnokTe Macata Ha MaunHata Bbpxy paBHa Hxop3oHTaHa NobbpxHOCT. Ako Macata Ha MaunHata Ce nIb3ra nn KlaT, en.nHcTpymeHnn Detaiht He MoKe da Ce HanpaBnBa paBHomepHo.
  He npetobapbaTe Macata Ha MaunHata H He n3non3BaTe KaTo Cbna nn CKeIe. IpetobapbaHTo nn Ctoeheto Bbpxy Macata Ha MaunHata MoKe da DOBeDe Do h3mecBaHa ueHTbpa Ha TeKecTt Ha Macata MoKe da ce O6bphe.
  He 6pa6oBaTe DpyH MaTeepHaN OCBEN IbPBO HnPiactMaC, KOTo IeCho ce peKaT. NkHIOueHHe: CaMo C npOboJeH TpOH N IOxOdaHpeKeuIN DnCKOBe MoT Da Ce 6pa6oTBaN neCHO nOdaBaun CE Ha P3aHc MeTaH. (Hap. anyMHH).
  He oTcpanhaBate c pka otuyneH npueta, ctpyKn nn noo6H uactn OT dtaa B 6n30ct do dBHexata ce pekeua qact / HOK, nck,
• 3nnon3bAHnte MaunHrpa6Ba da OTROBAPHT Ha DIN EN 60745-1. Ypei npon3BeHn OT 1995 r. Hacam Tpr6Ba da HmAt 3hak CE.
  HepekeHa pkaT.e He HapnabnaBaTe detaa cmo Cpbka,a n3non3BaTe npanenHnn bTNOB orpaHHTEN.
  CneI n3KnIOUbaHe Ha 3aDbNkBaHcTo, He cInpaTte peKeIuTe qactn KaTo rnpTHnckate O t CtpaHI!
  -Ⅲnol3BaIte HHTCPyMEnITe cMo NO cbuHCKOTo NM npedHa3NaueHne.
  -ⅢIIOI3BaIe cAmO 63yIpeHn peKeIIN DnCKOB; OCHOBHOTo TAno He MoKe Da 6bJe No-De6Eno, a 3b6HTe Da 6bDat NO-TECHN OT De6EHHaTHa pa3TBapAIIH KInH.
  PpOBeHbAtepeoBHO，dAn60nToBete ca3npaBo 3aterHaTl
  He nno3BaTe HnKora pa6oTHata Cm Maca HenpofoecnoHaHNO He no npedHa3haueHne!
• OTeTaPaHete BCnKn npEdMeTHo OT paOToTHa Maca, KOTo He ca Heo6xOdHM.
• He n3noJ3BaIte 3a p3aHe Ha DbpbBa 3a orpeB.
• He n3noBaaTe Macata Ha MaunHata 3a pr3aHe Ho obJnDbpBeH MaepHnA.
  BknOuBaHTo H3KnIOUbaHTo Ha 3nON3BaHIne nnHCTpyMeHTn da CTaBA cAmo Ype3 3auTHnI npKeKbCBAu.
  3a npoBjHKnTeHNO fHKcnpaHa npeKbCbaHa Ha ypeDa B No3uNnBKKIOUeHO",H3No3BaIte 3a ByToHa 3a BKIOUcbHe
  CmeheTne noBpeHHeNte BIOJKNc npOdbIroBaT OTBOP C HOBI.
  Korato He ro n3nonBate, 3aKaayeTe 6ytau npbT Ha npedBnEHHra BHT.
  Korato He 3nnon3bate npbkykata 3a 36yTbahe, 3aKaaye Hn npdeBnEHHa 3a centa dbpkaa 3a cbxpaHHe (fnr.8).
• YBepete Ce, Ye DBeTe BbPTaIe N Ce IpJbKnn 3a ΦHKnPaHa He KpaKaTa Ha Macata Ca NoCTaBeHn C OCNryPHTenHnte 6oNTOBe B OTBOpHte Ha CTpaHnHaT aACT N BnHTOBete C pKoXBaTKa Ca 3dpaBO 3aterHtN (FmR.15.3).
• Pnpnnyckane B eKcnnnoataa Cye bpe, Ye puyHnr TpNkynrnp, 06eppe3a HnBepKanHHrr TpnoH ca 3akpenenHdo6pe Bbpxy MaHHnHnT, MaHHnHnr NtOe 3akNIOUe CHryPHO B n3pr3AHHo TBOp Ha pa6oTHATA Maca H wectorpaHHr KIOUe e noctabeh 3a DonbHnTeHa ChrypHoc (FNR.17.3).
• He n3noJI3BaIte Macata 3a pr3aHe Na OTKPnTO B DbKIOBHO Bpeme.
  Cn3BaIte MaKCHMaHHTe pa3MepHa 3aTOrOBKHTe (Bx. "TexHueeCKn DaHHN").

BG

HHCTPYKUN 3A BE3ONACHOCT 3A LIPKUYIARPH

• OcbEN Te3n CneuHn yka3aHn 3a 6e3onacHOCTa MaunHata, HnpeMeHHo Cna3BaIe Te3n YkA3AHN 3a IINON3BAHN pYeuH cnpKpyIep.
• 3nnon3BaIte cmo pBHyH uPkyIpaC pa3Tbapu KINH, MaKc. 200 mm dnaMaTebp Ha peKeUH IInCT n Do MaKc. 70 mm dbl6OHHa H pr3aHe.
• 3nON3BaIe cAmO TPOHOH B pAMKITE Ha yNOMeHaTIte MAKcMmaJIHH pa3MepeH Ha OCHOBHATA IIoOa (BHX QH.18).
• N3non3BaIte HAcToIeH UInKpyIep CamO CbC 3aUnTeH KAnA KOnTO CbOTBeTCTBa Ha N3NCKBaHHaTa
  BHNMAHNE: PpOBepe TaIIN peKeuHrT Dnck Ha cNpKynpa e MOHTpAH yCnpEHO HA OTbopa B npoeena 3a pnaHe; npHnyda pUHnA TpR6Ba da ce CEHTPOBA HAnBO.
• PioiPaiTe 6bIg IeTAAHn OTKbM cTpaHATA Ha CBAHHe, Taka He, Te da Jekat XOpHOTaHHO; HApIMep C Onopeh poIKOB cTaHB wolfcraft (apt.Nr.6119973).
  -Ⅲ6BBAe npetobapBaHe npbHn npkynp.
  -He n3noJI3BaIte ⅢnΦOBuHN DnCKOBe.
• 3nnon3baaTe cmo npenopbuaHn pekeu nDnCKOBe Hn Hn3bpaate B 3aBNCMOCT OT Maepnana, KOITTO TpBa da ce peke.
  -ONACHOCT:He np6bnjkaBte pueTe cn KbM oJlaTt Ha pr3aHe N KbM peKeuHn Dnck.
• He nianaiTe noi detaa. 3aunTHnIAT kanaK He moKe da Bn npednaOn ot pexeuniaNck.
  HaroTe bNoHata Ha p3aHe KbM De6eHHata Ha DetaiHa. Pd DetaiHa Tp6Ba Da ce BHKda No-MaIKO OT TbHATA BnCOHnHa 3b6te.
• BdTe BnHaH noTOrBeHH 3a ToBa, Ye npn pR3aHe DeTaNbT MoKe Da 6bDe 3axBaHAT OT peKeuHa NcK N da 6bDe HxBpEn CpeUy 0cbNyBaun MaunHata.
• O6paTHnT yIap epe3yIITAT OT HENpABHnHO HIN HENoDxOaHIO 3N013BaHe Ha TpHOHa. ToM MoKe Da 6bDe npedotBpAteH C NOxOraHnpedoxpaHTeHH MePK, KaKTo e ONcaHo No-Dony.
• pIbXte TPOHc 3nPBO C bBETe n PAMEHETo NOCTABETe B NIOXHEHe DA MOrAT Da NOEMAT CINHHe TA OpaBHnYdAP. CTOIE BHNAR B cTAPnO HPEKUINCK, HNKORA He NoCTABRnTE TNOTO Cn HA EDA HINNc RpeKHe Dnck. PnOb apOBaYd AP UINPKyIpBt MOKe Da OTCKOH HaaAD, HO oCnykBaunu INepcoHAN MoKe Da ObnAe e CnHIne Ha OpaBHnYdAP C NOxOXAnu INpEOXPaHHTEN MHepKn.
  Ako peKHeuHnT DNCK 60NOKPbI HnBne pKbcHETe paObTA. 3MKnOHTe TPOHa I rO npbXte CnOKoHOB MATEpHana, DOkATO peKHeuHnT DNCK CNpe c nDHNK. HnKora He onrTaBte O CTpaHnTe TPOHa OT DetaHa N da o N3rTeNlnt Ha3d, DOkato peKHeuHnT DNCK Ce DBNK, INaue MOKe da noCnDEBa 60patehUpy. YctahOBete O nCTPAHETe npHHaTae 3a 60KnHPaHETo HA peKHeuHnDNCK.
  Ako nckate da npchete OTHO BO TPOHOb, KOTo e cnpB B detaHb, ZENTPnaipe TPOHb B pnoeHa hpa3aHe H ppoBepeTe daan peKeuHte 3b6n He ca ce zakHHnB B dtaJIb. Ako peKeuHnT DcK e zakHHnE, ToJ MOke Da ce n3MbKHe OT detaJIb nn da npedINBnKa obpateH ydp, KORATO TpOHOT bJe PCHAT OTHO.
  IopnpTe TOnEMTNE IIOCKOCTH, 3a da HamaNTe PnCKa OT o6pateH yad OT boknappeKeu DNCK. TOnEMTNE IIOCKOCTN MORAT da CE OTHa NOcBtHO cTnerNO. IIOCKOCTNe TPrBa Da 6bDat noIpneH N ODBe Tcpani, KaKTo 6n3o Do pKeJua N Dnck n npueHa na pr3aHe, Taka CbIoNo KpAan.
  He 3nol3BaIte TbHn Hn NIOBpeDeHn peKeu nn DnCKOBe. PeKeu nn DnCKOBe C TbHn Hn NOrpeHNO pOneHTnpaHn 3b6n npEINBnKBat Ype3 TBbpTe TcHn Ipoen Ha pr3aHe, NOBHeHO TpHe, BOKpaHe Ha peKeu nn Dnck n OgbateH yap.
• Pnpn p3ahe 3aterhe 3dpabHO hactpoHKte Ha nbbochHATA n Ha bfgna Hp3aHe. Ako no BpeMe Ha p3aHe hactpoKITE ce npomeHr, pekeuHT dNCK MoKe da ce 3aknnnHa da nocneBa o6paten yap.
  -5bTeOc0eHO BHMaTeJIHn npn .NoTbBaun cpe3oBe" B cbueCTByBaun CteHN HIN dpTu yAcTbUN, KOTo He ce BNkDAt. NtBbaunr peKeu
  -3a Tpnoh 3a WnHObE H TpnoH 3a FyRn BnHarn H3NON3BaTe DpbKka 3a NODaBaHe, NOHeKe NtCTbT He Ce BNkDa.

YKA3AHNRA 3A BE3ONACHOCT 3A INPOBOIDH TPNOHN

OcBHe T3n CneuHn 3a MaunHa yka3aHn 3a 6e3oNaCHOCT, cna3BaTe HnpeMeHHo yka3aHnTa 3a 6e3oNaCHOCT Ha n3non3BaHn np6oDhenTPOH.
-He pa6oTe c noBpeDen np6oDcH TpnoH.
-ИЗБВаNTe npetOBapBaHETO Ha npoBODnTpnoH.

BHIMAHHE: H3N013BAIte MACATA 3A ΦPE3OBAHE CAMO B KOMENHALIIN

C I NAPAJIENHINΦPE3OB BODAU (APT. NO 6901000)

YKA3AHN 3A BE3ONACHOCT 3A O6EPΦPE3A

• Ocbentn yka3aHna 3a be3onacnoct, cneuHmHn 3a MaunHa, cna3BaTte HnpemHeHO yka3aHnraTa 3a be3oNaCHOCT Ha nON3BaHaTata o6epepe3a.
  -5bdeTe BnHarnnoDrotBeHH 3a TOBa, ye npn Fpe3oBaHe DeTaNbT MoKe HeOuaKaBaHO da N3ne3e N3BbN KOHTpOn I da NoCneDbA o6paTeH yap.
  He n3no3BaTe Macata Ha MaunHata 3a φpe3oBaHe noD tba!
  3apaHToBA H3NbHnBaHTe pa60HTe C pfe3a, H3K1HouTEnHO cMo C npAneHHr OpAHHTen, KOITo MOKe Da CE NOnyU KATO PnHaDNeHKHOCT KbM MaunHata (apt.-NO. 6901000). 3a da npedotBpaTte o6paTHu yapn KaKTO nOIOnpaHe Ha pfe3a Tc pbKa.
  CnBaTe opHnHaHata HcTpyKun 3a o6cnyKbaHe Ha napaneHHra OprpanuHTen Ha ppe3a (npoN.No 6901000) 3a da ce ocBueCTBN KopeKTEN MOHTAK.
  He n3no3BaIte o6epΦpe3n c noBee 1800 W n noBee 230 V.
  -He n3noJ3BaIe 0pe3n c DnaMeTbp noboe oT 27 mm!
  Cn3BaIte npabInoto, Ye noDaBaHTo Ha HnCTpyMeHTa Tp6Ba Da CTaBa cMo Cpeu Nyocokata Ha BbPteHe.
  -36epete doCTaBeHnTE NOIOXKNN pBcTeHN B CbOTHOWeHne C rONMHaTn HpEeOBAunn HnCTpyMeH. 3a cnrypha pa6ota Tpa6Ba da ce n3no3Ba Ha-MaIKN NIOxKeH npBcTeH.
• 3nnon3baTe cAmO octpn HcE30Baun HNCTpyMeHTn, noDdbpxKaHN HAcTPOeHN CbIaCHO daHHNE O T npOn3BOHNTeHa HNCTpyMeHTn.
  CnBaBnTe npH n3no3BaHnTe ypeHn HnCTpyMeHTn, NOOeHnTe Bbpxy npOyKTA, ONaKOBkATA Hn B paOHTa HNCTpyKUN NOCOeHN DaHHN 3a MmH.-/MaKc.06OpOTn n OOKaTn Ha BbPteHe.
  BHHMaBaHTe, nOrpeuHOTo H3nOJ3BaHe Ha ope3OBaun HnCTpyMeHTn, Detaiu npncnoCobneHn 3a HnpaBnBaHe Ha da TaHa MoKe da DO na OOna Cha CHTyaun.
  -Дрькte рьцete даец OTфpe3OBaunn HNCTpymENT.
  -ДOKOLKOTo E Bb3MOKHO npn Фpe3OBAHe, ИЗнOL3BaTe npHTNCKaUng КpaueTa ДОпьнHTEнHo KbMnapaJIeHHOrpAHHHTeHaФpe3aTa.
• Ykpene Te bIITte DetaiHn OT cTpaHATA Ha CHEMaHe, 3a da npedotbpaHTte onachn ciTyauuHn OT hekoHTpOlnpaHO pno6pbuaHe. Onopata Tpr6Ba Da CTOn CTabnHIO n da IMA cbUATA BcOUnHa KATO HA MacaTA H MaunHATA, Hanp. onOpen poKOB cTAtNB (apt.NG.6119973).
• O6paobTBaTe cAmO DetaiHn, KOIO Bb3 OCHOBa HA TxAHATA rolemHa H Ha TxAHOTo Tp8Ba Da MORAT 6bDat pNDbpxKaHn CHyphOn HnapabnaBAn OH paobTHNK.
  B CbOTBeTcBHe C HnCTpyMeHa N DeTaIHa H36peTe CbOTBeTHte O6oToH. B Pa60THa TnHCTpyKmHa BaWata Oeeppe3a ige Hamepnte CTOnHOCTHe Ha O6oPHTe.
  CnzaBaIte MaKcHMaIIHITepa3MepeHaTeaTna(BnK TexHnueeCKXapaKTepuCTmKn).

BG

OKOMNNEKTOBKA

Pa3oNaKobaiTe KaOHa cMaster cut 1500 npoBepe TaHn CbDtpKa BcNKn YacTh, noKa3aHn Ha fHyprte (fmr. 1, fnr. 2).

OCHOBEH MOHTAK

MOnTaknHaMacata:Noctabete rohpataact Ha macata bBypxy paHbN uCCTaOCHOBa.3aKpenetepnehdataDboKa KpaKa nDolnataHanpehna noDnpora,kaKTo e NOKaHOHa Hpypata,C BcUckn KpeNekHN enemnti.BHMabaIe Dbata KcKpuauin NOCTa da Ca BNEIIN BTOBpHTe 3a 3axBaHaHe nBtA hPbKOxBAkTa Da ca 3pABo 3aTeHATn (Phr. 3.1).CNeT ToBa MOtnpaIte 3aDHaT a BoKa n BTOPA tOJHa HanpeHn noDnpora.3aTeHete HanePeyn NoOpn KbM npdHATA HeNOBnHa DBOKa KpaKa, cNeI KOeTO oBpHete 3aDHaT a BoKa Kpa Ka Harope nMOThnPae TpyRn KpaHn DBeT e HapEnu HApENu (Phr. 3.2).TbXHeTbe TBeT a N3a KpaKa C KOJIeua KbM 3aDHaT a BoKa KpaKa, a DpyrIne DBe KbM npedHata DBOKa KpaKa, kaKTo e NOKaHOHa Hpypata (Phr. 3.3).

BHHMAHNE: BHIMaBaIte OToBeJIaHaHTe KpeJeKHeIeIeMeHTn Da 6bDat 3aTeHATn CaMo DToJIOKOBa, Ye Macata Da MoKe Da Ce CbBa CJeKO cBnpOTIBeHne. BnHar npOBepRaIte DaII nDbete FHKcpaun IpBXKn ca 3aueHnn I dBaT a BNHTa C pBkoXBaTKa ca 3dpaBO 3aTeHATn.

Macata moKe da ce noctabra cAmo BbpxkpaKaTata.

BHHMAMHE:BHMaBaTe Da He npTnChete pLcTe Cnp Pa3bBaHe H cBbHa He Ma Macata, KaKTo N Pn 3aBbPtaHe Ha MaunHHHNIOT.

MehreMoHTnpaTe MeHReMeTo KbMa paOthata Maca, KaKTo e Noka3aHo Ha fHypata. MeHReMeTo MoKe da ce MOHTnpa ot dChata nIOT IaBata cTpHa (fHr. 4).

3aunTeH pKeBcBa? MoTHnpaIe 3aunTHnpeKbCBa KbMa paOthata Maca, KaTTo e nokaaHo Ha fHypata (Hr.5).

PpeNa3eH Kanak: MoHTnpaTe Hau-HanpeoTDeHNHe DaTaNHa npEpaN3Hn Kanak. Cne ToBa nXhHe TbPKaHte Ha npEpaN3eH Kanak c HapablaBaaata B aIyMnHBeBn npOHHn 3aTeHete DbTa BnHTa C bTpeWen WeCTOCTe H WeCTOrpMaHn KIOU (fHr.6).

Klema 3a BkIouBaHe: 3abpbxTe EINHn Kaia Ha UHypa B OTBopa Hc KEmata 3a BkIOUbaHe, a Dpyra-B paMOHa npEpa3Hn Kaak (fHr.7).

Pp3ka 3a n36yTbahe; NocTaBepe np4kata 3a n36yTbahe Ha nbpkaa (Hr.8).

BfIOB ORpaHHTEN: MoTHpAte BflOBnI ORpaHHTEN, KAKTo e NOKa3aHo Ha HpypTa (Hr. 9). AanyMHHeBnT ORpaHHTEN Tp6Ba da ce MOHTnpoTOHO B 3aBcHmOCT OT BnCOUHATA. PnB BnCOUHa Ha 3aRTOBkata OT MHNmym 15 mm -BepTKaJIHO (Hr. 9.1), npN BnCOUHa Ha 3arOTOBkata OT MAKcMym 15 mm -XOpN3OHJnHO (Hr. 9.1). BflOBnI ORpaHHTEN BODN 3aRTOBkATA B HnPaBnBaunn KaHAN (Hr. 9.3).

YcnpedeH orpaHHTe: MoTnpaIte IbpXaHa Ha orpaHHTe, KaKTo e nok3aHo Ha fHypata (fHr. 10.1). MoTnpaIte XnaBao DbTa BnHt a KBApaTHe raIK (fHr. 10.2). NocTabe anyMHHBeBaor paHHTe, KaKTo e noKa3aHo Ha fHypata, n 3aterhe BnHTobete (fHr. 10.3). Cled ToBa noCTabete ycnpeHnraorpaHHTe B HapabNbaaata n 3aterhe BnHTa c pkoXBtka (fHr. 10.4).

BHIMAHHE: Bnokpahe Ha MaunHHnnn nnot: IectorpamHnat knou cyuK 3a aunTHo 6nOKpahe Ha MaunHHnnn nnot n npedn BcKa pa6ota C macata Tpa6ba da ce noCTaRa KaT0 e noka3aHO Ha fnypaTa, o603naeHO kato noLoKeHne, lock" (6nOKpaHO) (fnr.11).

IopnoKn npbctehn: DbaT a noJIOKHN npbcteHa cnkyat 3a BaWata 6e3onacHoc T npu pa6ota c o6eppe3a. Bnarn n36npaTe haManknBb3MOKeH noJIOKHe npbCTen 3a Hsnon3BaHata Ppe3a (Fir.12).

Pnxbatn: Ibxhete npnxbaTne B npedbapntelno npoBHTe OTbOpn. 3aedHO c MeHrEmTo TE cnykat 3a KcnpaHe Ha 3aTOBkTe.

CfBAHE H PA3fBAHE HA MACATA

BHIMAHHE: Pnpdi cBbAhe Ha Macata 3aBnHKeIHeN 3BaKdAte 3axpaHbAunu Ie nceN Ie Ie CnHa ypeDa oT 3aunTHn pkeCbau.

CfBBAHe: Pa3BnIe BnHTOBe TcPbKoXBtKa DToJIKOBA, Ye DbATA NkCnPaun NoCTa da MOrat da Ce N3TETN 3ABbpTNT (Fnr. 14.1). CnE ToBa CbHETe Macata no Nocoka Ha CTpeKnata. C OrneD ha BaWata Be3onacHOCT BnIMaBaiTe eINH kpaD aCe HAMpa B Tanata, KaKTO e NOKa3Ho HA Fmrypata, 3a Da He MoKe Macata da Ce n3nb3an (Fnr. 14.2). KoneLauTa B tanite 3a kpaKaT a cnykat 3a no-Necho npndnBkBahe (Fnr. 14.3).

Pa3bBAhe: XbaHe 3pABoC DBe pBcE Macata H NoCTabete Kpaka B Tanata, KaKTo e NOKa3aHo Ha FInpyata (Hr. 15.1). 3aBbPte Me macata C eHNO dbnKeHne no nocKa HA cTpekata, dokato ce pa3bHe dokpa (Hr. 15.2). CTeJ TOBa HATCHETe HADONY c EHa PbKa PpeHnK pA HA macata, 3a da ce fHKnPa no-NECHO ropHata qact. TbxHE tBATA fHKcnpaunocTa BOTBPNTe HaBTa BHNTa cPbKOXBtKa (Hr. 15.3).

IIOIROBKA 3A 3AKPENBAHE HA MALINHH

BHIMAHHE: OTBAPARHETO 3aTbapARHETO HA MaunHHNn PnO e OnnCaHO Tk PnpDn paOToTa n TpOBA da Ce CNEBa pRn BcRAHa Ha MaunHHne!

OtBapAHe Ha MaunHHn HnIOT 3a MoHTaxHn paBToH: CbaneTe WeCTORpaHH KIOU Ha 3aunTHata 6NoKpOBKa. 3abptete DBeTne NactMacobn IocTa Harope n leko NOBmHHe Me MaunHHn HnIOT 3a DaBaTae NoCTa. 3abptete MaunHHn HnIOT no nocoka Ha cTpeNkata,doKato 3actaHe BepTKaHNO, nro 6yThet He nped do orpanuHnTe HnCne ToBa 3abptete MaunHHn HnIOT dotoNKoBa, ye da 3actaHe ctaBnHO bPxy Macata (fHr.16).

BHIMAHHE:BHMaBAte MHOrO npbCTHe Bn Da He nonaHaT NOAHHHnI NIOI pN 3BpBaHe Ha Te3n DeHOCTH (OnaCHOCT O HapaHRBaHe).

BG

3aTbpaHHe MaMunHHn HnO Tcne yCneWeH MOHTaK HaMaunHnHa; NOBmHHe Te IeKO MaunHHn HnOT. CnE ToBa EINHOpeMeHHo Ro n3IbPnAte DOKpAHsADn HTo NoCTABeTe 3aCTAte BEpTHKaHNO Do aDnHOrOpAHnTe. XBaHete 3dPaBO MaunHHn HnOT 3a DBATA PnACTMacobnNocta H0 RaBpTe NO cOcKa HA CTpeNkata, DOkato 3actae B NONOKeHHe 3a KHCpaHe. FHKcpaTe OTPO MaunHHn HnOT 3aTbOpTe Dbata pactmacobnIOCTa. TBxHEe OTHOBo WEctORpAMnKIOu HtRE3DoTo 3a 3actonopRaBe, 3a da 6bokpate MaunHHn HnOT (Phr.17).

MOHTAX HA PbueH UINPKyIAP

OTbopTe MaunHHnI NIO, KaKTo e nOKa3aHO Ha qHr. 16.

CbMecTNm pBHyn uKpynlpi: B3emTe MAkcmamHne pa3mepn OT cbMeTmne pHuN uKpyIrp (fH. 18). H3non3BaTe cmo pBuHn uKpyIrp C HOK 3a pa3knHBAe C MaKcMaJeH dHaMeTbp H peKeUH dack 200 mm M AkcMaHa Dbl6OuHa Ha pr3aHe do 70 mm.

MoHTaK u cHrpoBaHe Ha pUHNuPkyIrp: H3IbPnAte Ha3aD NOBnKHHNpEpa3e Kanak Ha pUHNuCpKynp I eHTnpaIte MaunHata Bbpyx npouena 3a pr3aHe. OcbOoTe 6loKnPOBkata 3a dblboounHa Ha pr3aHe Ha pUHNu CpKynp I cnYchete Dnckdo Kpar Ha dlboounHaTa Ha pr3aHe (PHR.18.2). 3aterHete 6loKnPOBkata 3a dlboounHa Ta pr3aHe. LcHTpPaIte pUHNuCpKynp ycnpoeHo Ha npouena 3a pr3aHe.

BHMAMHIE: PpOBepe pa3cTOrHHeTo OT Hn-PrEHNr 3b6 Ha peKeunr DnCK Do PrEHNr KpaH Na PPOeNa 3a P3aHe. To TpR6Ba Da e no-MaIKo or 20 mm.

PnMep 3a MoTAn Ha MaunHn C no-MaIKn onOpHn nloH.

CneIeHTPOBkata Ha MaunHata MOHTPae Hau-HanpeD Dbata CtpaHnHn OrpaHnHnTn, Taka Ye ZnATA NIOBbpxHOCT da e B KOHTAKC O onOpHata nnoHa MaunHata. CneTOBa MOHTPae Dbata npxbata (fMg. 18.3). 3akpenete Ehata cTpHa ha ONOpHata nnoa. 3a ceNTa MOHTPae hau-HanpeD bTpKauch C DaBA CTPaHnHn ORpaHnHnTn, BHmAbaiye nLATA NIOBbpxHOCT da e B KOHTAKC O onOpHata nnooA. CneTOBa O t CpeUyONOnOHa TcPaHa MOHTPae AANOruHNO bTbPKauch C Da BA CTPaHnHn ORpaHnHnTn, MoHTPae Dba npxbata (fMg. 18.4). Dbata npxbata Tpr6Ba da ca MoHTPae KOKOTO ce Moke no-daneue no nocoka Ha no-dlrata cTpHa ha ONOpHata nnooA.

PnHmep 3a MoHTaX Ha MaunHH C no-ronemOnopHn nnou.

CnEeHTPOBkata Ha MaunHata MOHTpAte Hau-HanpeDdbata CtpaHnHOrpaHnHTen, TaKa Ye cHaTATA NOBbpxHOCT Da E B KOHTAKC onOpHata nOoHa HA MauHATA. CnE ToBA MoHTpAte Dba TpXbTa (Phr. 18.5 c). MoHTpAte Dba CtpaHnHOr pArHnHTen KOLKOTc Me MoKe no-daneue no nocoka ha no-dlbrrata CtpaHa ha onOpHata nNoa (Phr. 18.5 d). MoHTpAte bTNOBte DpbKau C edNH CtpaHnHcH OrpAHnHTen I doTbnHtEnIO C BnHT, Wai6a, OcnHyprtenHa Wai6a N raKa (Phr. 18.5 b). CnE ToBA MoHTpAte npXbTa. Ot cpeUynONKHATA CTPaHa MOHTpAte aHanOrHIO bTnoB DpbKa u C eHN CtpaHnHcH OrpAHnHTen I doTbnHtEnIO C BnHT, Wai6a, OcnHyprtnHa Wai6a N raKa (Phr. 18.5 b). Hakpar MoHTpAte npXbTa (Phr. 18.5 a).

3aTbOpete H 6JOKnpaIte MaunHHHn IIO, KaKTo e nok3aHO Ha fHr.17.

BHMAHNE: PpOBepTe Oue BeHbK DaIIpeKeuIaR Tnck Ha UcPKyIpa e MOHTnpaH ycNopeH0 Ha OTbopa B npouena 3a p3aHe; npHJka PbHnT UcPKyIaR TpRbBa da ce CEHTPOBa HHOBO.

Cbbp3BaHe KbM enektp03axpaHbAheTo: PbXHeTe eencela Ha pBHyra UpkyIep B 3auTHnna PpeKbCBaun EHN H yDblkntenH KaBnOT 3auTHnna PpeKbCBaU B 3axpaHbAun KOHTAKT (fHr.19.1).YDbNknteHHr KaBn He E BKnIOueH B KOMPNEKTa.

BHMAHHE: Ppei nIbpoHauJIHO NycaHe B EKcNlOaTuaHnHaTHcHete TepMonpeKbcBaay! Cne IpeKbcBaHe Ha eJIeKtpo3axpaHbaHTo BCNECTBHe Na CBpXhAnpeJHHe HATcHete TepMonpeKbcBaay, cne KaTO N3yakate 5 - 10 MInHyTN. Cne ToBa IpeKbcBaYbT BKJI./N3KJI. MoKe Da ce HaTcHene (fhr. 19.2 n fnr. 19.3).

HaTnchete UepBENH 6yToH (N3KJL.) Ha 3aunTHnI pKeBcBaC. Cne ToBA MoHTnpaTe KJIeMaTa 3a BKIOUbaHe Ha pBHyH nIpyKnHp (FmR. 19.4). HATnCHete 3eENH 6yToH (BKJL.) n npOBepTe cboDnH xoHa peKeuH dNck B npouena (FmR. 19.6), Cne KOeTO OTHOBO HATnCHete UepBeHH 6yToH (N3KJL.) (FmR. 19.7).

BHIMAHHE: Ipei ci tBbAHe Ha MacaTa N KOrato He a H3non3BaTe, pInHUnHIO h3BaJdaIe 3axpaHbAunu Iecen.

MASTERcut1500e rotoB3a pa60ta.

CTAUHOHAPHO PR3AHE C PbueH LIPPKyIAP

BHIMAHHE:BHHaHpa6oTe c npednazeh Kanak n 3non3BaIte CHTema 3a npaxocmyuehe npn Hrro.

Prahe c brrnoBnOrpahnHnten

PbXhete bIIOBnO rpaHnHTen B HapabNbaaata (frr. 20.1). BmmabaiTe cepHHAT Kpai Ha orpaHnHTe I da Mmaba KOkTO ce Moke no-6bn3o ND pnpdA3nH kana, 3a de o csoHpyn nobDmrahe h Ka naka (frr. 20.2). NsIbpnaTe bIIOBn OPAHnHTen Ha3ad n NoCTabe 3aTOBkATA do Hero. BInouche pblHnUcPKyIparOT zauTHnIpeKcbay. C eHATA pka H bIIOBn OPAHnHTEN i pyrata Ha 3aTOBkATA 6ytai Te no nocoka HA cTpeJIkata 3aTOBkata KbM peKeJIIaN DICK, KaKTo e NOKa3HO h Fnypata (frr. 20.3), dOKaTO cpeKeTe DOKpHa 3aTOBkATA.

CneTobnKIOHOTHOPOBpUHPNpO T3aUNTHINPpeKcbau.

BHHMAHHE:BHHaBHaBte pBcTe Bn da ca doctaTbHNO daJeOe OpeKeuHN DnCK (onachocT o HapaHBAHe).

BHHMHNIE: IbJnHnHaTa Ha 3arotOBKIne ot cpedaHa npouena 3a p3aHe do paMToHa npedna3HnKa nak Tp6Ba da e MaKc. 330 mm.

CbrnoBnOrpaHnHTe moKTe dapeKTe 3arotOBKn noD bTbN 0° do 65°. 3a ceta pa3BnTE BnTHa C pkoXBtKa, perynpaTe jenahna HbI n 3aterHeTe OTHBO BnHTa C pbkOxBaTKa (fnr. 20.4). CneToBa peKTe, kaKTo e noka3aHo Ha fnr. 20.1 do fnr. 20.3.

Pra3aHecycnpednHaOrpaHnHTen

TbXHETe yCnpOeHNr ORAPHHTEN C TOBpEN B HINT C pKoXBnA H napBaBnAaBata. ByTHETe YcnpOeHNr ORAPHHTEN 6nIHO Do npEJa3Hn I kanak. YBepeCe ae anymNHeBnT OrpAHHTEN B NkAcBb CnyaH He CTbpN no-HanpeD on TocneHn BnIM 3b Ha peKeun Dnck (Φnr.21.1). B TAKb Cnyae pa3BnITE KpeneKHHTe BINTOBe, M3DbPnaTE MaNKo H3aD orpAHHTEN n CNEI TOBA OTHOB 3ateHETe BNTBOTe.

BG

PeynepaTe JhenaHata Hpa 3aerHete BHTa CpbKoxBaKa. BkIOueTe pUHHNmuKyIrpOT aauTHNn npEkbay. Bytae no nocoka Ha cTpeKATA 3aROBkATA KbM Pekuian Da, KaTO e NOKa3HO HA qHypata (fMn. 21.2), DOkato cpeKeTe DOKPAa 3arOToBkata. CneT OBA hKIOHeTe OTBOHPOuHn UPKyIrpOT aauTHNn PpeKBcay. PnT ECHN 3aRTOBKn e 3aJbIKNteHNO da HnONlBATE BKKIOueHATA B KomnNEkTa npka 3a 36yTBahe (fMn. 21.3).

BHIMAHHE: TbIHHaHa 3a rOToBkHe oT cpeHata Ha npouena 3a p3aHe O yCnpoeHNr OpaHnHTe Tp6Ba Da e MaKc. 375 mm, a ot cpeHata Ha npouena 3a p3aHe O paMTo Ha npEpa3HNr KanaK - MaKc. 330 mm (Фг. 21.4).

BepTKKaHnKoch cpe3OBe

PnBepTKHnHTE KcN Cpe30e PbUHNr UPKyIrp TpR6Ba Da ce eHTPOBA HAOBO. PerynpaTe JekANHbTbLn Ha CKOBAHe Ha pUHNr UPKyIrp. N3bPnaRe Na3aNd NOBUNHINr PpeDnAeH Kanak Ha PbHHN rUPKynr np EHTPpaTe MaunHata Bbpynpouena 3a pr3aHe. OCBoODeTe 6JOKHOKpNAra 3a DblboOHATA Ha p3aHe Ha PbHHN rUPKynr nCNYCHete DNCA KO pKaH aNbLOOHNrHa pr3aHe. 3aterHete 6JOKHOpBkata 3a DblboOHATA Ha p3aHe. LcHTpPaTe PbUHNr UPKyIrp YcnpEOHn Ha npOena 3a pr3aHe (Phr. 22.1 n Phr. 22.2).

BHIMAHHE: POBepete paactoHneto OT ha-npeHn3b6 Ha peKeun DaCK Do npeHnK pau HA npouena 3a pr3aHe. To Tp6Ba da e no-majko ot 20 mm (ΦmR. 22.3).

Cnei ceHtpOBkata Ha MaunHaT a MOHTnape Hau-Hanpe dBata cTpaHnHrO rpaHnHtEn, TaKa ye e anna Tm NOBbpxHOCT da E B KOHTAK C onOpHATA nOoHa HA MaunHATA. CneI TOBa MOHTnpAte Dbata npxBata (Fir. 22.4 a). 3akpenete edHata cTpHa Ha onOpHATA nOoHa. 3a eNTa MOHTnpAte Hau-Hanpe bTIOBnDlbPcHc C DBA cTpaHnHrO rpaHnHtEn. BHIMABaTe UAnata IM NOBbpxHOCT da E B KOHTAK C onOpHATA nOoHa. CneI TOBa O T cpeuNtONKHATA CTpHa MOHTnpAte aHaONUHrO bTIOB bTbPckc C DBA cTpaHnHrO rpaHnHtEn. MoHTnpAte Dbata npxBata. DBa tpoXbata TpRbBa Da ca MOHTnpHa KONKOto Ce Moe No-danee No Nocoka Ha No-dblrata cTpHa Ha onOpHATA nOoHa (Fir. 22.4 b). 3abeJeK: Ppi no-rolemn ONOPn IOnOH pOnueepnArpe CbC zakpenbaHeto, KaKTo e OnCaHo Ha cTp. 15 (Fir. 18.5). PpOBepete oSe BeHNbX CBO60dnx Ho ha peKeunn dinck B npouena 3a phane (Fir. 22.5).

3aTbOpete H 6nokpaTe MaunHHHnnI Nnot, KaKTo e noka3aHO Ha qHr.17.

BHNMAHNE: PpOBepTe Oue BeNbXdnnpeKeuHrTnck Ha uPKyIpa e MOHTnpaH yCIOpeHHO HA OTbopa B npouena 3a pr3aHe; npHyka pTuHnrT uKpyIrpTr6Ba da ce cHTpOBA HHOBO.

PRA3AHE C BEPTNKAJIEN TPNOH

LcHtpnpaTBeBPTKANHH TpOH Bbpy MaunHHN H NtO, TaKa Ye HOKbTa BbPbN cHTpanHo Ha npouena 3a pnahe (fHr. 23.1). MOnHpAteBETKANHH TpOH C Yetnp CTpAHHHOrpAHHN EHTpAHTENHa KKTo E NOKA3aHO HA pnypata (fHr. 23.2). 3aTbOpTe n6bnkapHeMaunHHN NtO, KaKTo E NOKA3aHO Ha fHr. 17. PbXHete KNEMATA 3a BKIOUbae KbM pKeBcBAVAe KbM pKeBcBAVAe TpOH BPTKANHH TpOH C bHTpAuta C BPTKANHH TpOH AaBKnHTe HNOIINHO IINON3BaIe PpeNa3Hn KaK (fHr. 23.3).

YIOTPEBA KATO PAEOTHA MACA

MASTERcut 1500 mma4 nlaactmacobn npxbaata.C TxAHA NOMOUI 3aROTOBKeMe MOrat Da ce npTARAT N 3aTARAT rBkaboN CnrypHO (fHr.24).

PERYINPAHE HA MALUNHHNRAIOT

BmouHnHa ha Maunnnn Hnnot B paobTHn Hnnot e perynnpa Hapbpyno, taKa ye da ce ocnyr npb3rahe Ha 3arotOBkata nad 3ohata Ha paobTHn Hmaunnnn Hnnot. PnHyka Da mauHHNHTnnot MOKe Da ce perynha Ha BmcoUHn. 3a ceta pa3bnne oceTTE KOHTparAH. CnED TOBA noPabHete Maunnnn Hnnot C weCTe perynpaun BNHTA, taka ye da ce n3pabHN C bnuocuHnata HpaobTHn Nnot OTOHO 3aterHete KOHTparainte. PpepaObaTe BnHnCe ybepaBaite, ye weCTe KOnTpRaanCa 3aterHnat Do6pe. Cbto Ta npepaBoTaBnHarCe ybepaBaire, ye BnHtOBete n KOthparanKeHtBaTa DpbKaHya, npdHaHauehen 3a fKnCpHaHe Ha Maunnnn Hnnot, ca 3aterHnat Do6pe (fnr.25).

CNEUHIN INHAJIENHOCTN 3A MASTER cut 1500 IBA HOKA 3A PA3KINHBAHE 3A DOnbIHNTENOHTHPAHE, KAT. NO 6930000 H 6904000 3A N3NOJ3BAHE HA PbHHIUPKUYIAPN B3 HOX 3A PA3KINHBAHE

BHIMAHHE:OncaHHTyK CNEaHaHn PnHaDJIeKHOCTMOKe Da CE n3nonBATcMo c MASTERcut 1500.

3A6EJIEXKA:Функшониранeto И ekcnnoataaHTa Ha Te3n CneuaHn PpHaJNeKHOCTn Ca OINcaHn NO-dony N ca INIOCTpnpaHn OT cTpaHnua 24 HataTBk.

YIOTPEBA IIO IPIEINHA3HAUEHNE

Дыота HOКа 3a pa3KNHBAHe NO3BOJIHbAT N3NOJBAHoTo Ha pUHn UINKpIyIpy6e HOKObe pa3KNHBAHe. HOKt 3a pa3KNHBAHe 6903000 e pa3peiH 3a yNtpe6a npuPbHn UINPKyIpycpeKeuH HOKOBc MAKCMANeHdAMETbpo 160 mm uHpiHa Ha pr3aHe OT MNHMym 2,4 MM do MAKCMYm 2,8 MM. HOKt 3a pa3KNHBAHe 6904000 e pa3pe6a npuPbHn UINKpIyIpycpeKeuHOKOBc MAKCMANeHdAMETbpo 200 mm, HpiHa Ha pr3aHe OT MNHMym 2,4 MM do MAKCMYm 2,8 MM nMAKCMANHa DIn6OvHa Ha pr3aHe OT 66 mm.

BHIMAHHE: Ppeyn ynoptepaHa cneuHnHte npnaIeJeKHO 3aBnJKeHnHO npoTeTe o6uHte Yka3aHn3a 6eOanchoCT, yka3aHnTA 3a 6eOanachoc3a pBuHn UcPKyIrpInOpHnHaHTo ybTBaHe 3a ynoTpeHa pbHn UcPKyIrp 6e Hox 3a pa3KnHBaHe!

HOXOBE 3A PA3KJIINHBAHE KAT. NO 6903000 H 6904000

ApTNKyIbT H0x 3a pa3KnHBAhe 6903000 cbIbPka KOMNOHEHTte: 1 6p. HOK 3a pa3KnHBAhe (3a MaKcMmaeH DnAmeTp ha peKeunr DNCK ot 160 mm), 1 6p. IbPkaa 3a HOK 3a pa3KnHBAhe (IbIra KOHCTpykun), 1 6p. Wabloh 3a HactpoKa (frr. A). ApTNKyIbT H0x 3a pa3KnHBAhe 6904000 cbIbPka KOMNOHEHTte: 1 6p. HOK 3a pa3KnHBAhe (3a MaKcMmaeH DnAmeTp ha peKeunr DNCK ot 200 mm), 1 6p. IbPkaa 3a HOK 3a pa3KnHBAhe (kbca KOHCTpykun), 1 6p. Wabloh 3a HactpoKa (frr. B).

BG

BHIMAHHE: IIO-IOIy e OINcAn cAmO MoTaNbT H fynHKnOHnHaPeTo Ha HOKa 3a pa3KNHBAe C KaT. N2 6903000 3a pBHy nIpyKnyrpn C MaKcMAnen DnAmTeBp Ha peKeuin DnCK ot 160 mm. HoKb 3a pa3KNHBAe C KaT. N2 6904000 3a pBHy nIpyKnyrpn C MaKcMAnen DnAmTeBp Ha peKeuin DnCK ot 200 mm e IndHTNHe NO OTHOWE He CBOETo FYNKKnOHnPaHe MOnTaX. C To3N HOK 3a pa3KNHBAe CbIo Taka e Bb3MOxH Do a ce o6pa6oTBat 3aTOTOBKn C MaKc. BnCOUHnAOT 60 mm.

MOHTAX HA HOX 3A PA3KINHBAHE

OtBopete MaunHHnna nIOT, kAKTo e NOKa3aHO ha fIg. 16 (fHr. C.1). MoHTnpaTe dbpKauc a KpeNekHnte eJeMeHTn. MoHTnpaTe xla6aBoTa3n Crno6ka (fHr. C.2). 3aTbOpete MaunHHnna nIOT (fHr. C.3). PbxHete otrope Hoxa 3a pa3knHbaHe Ha OK. 2 cm B KaHaJyeto Ha IbPKaHa. BHmabaiTe HOKbT 3a pa3KnHbAe Ha e 3aBpTHn NO NOCkata Ha cTpEklkata KbMaunHHnna nIOT do OrpaHnnten (= BeptTKaHIO npabHBaHe). 3aterHete BnHTa C BbTpewHe WecctocTeH (fHr. C.4 n fHr. C.5). OTBopete OTHOBo MaunHHnna nIOT (fHr. C.6).

MOHTAX HA PbueH UINPKyIAP

Zn3bnpaTe Ha3ad NoBnKnnI npednaeH Kanak Ha pHyN IuPKyIepnHTnpaIte MaunHaTa Bbpy npouena 3a p3aHe. Ocbo6oTe 6loKnpoBkata 3a dbl6OUnHata Ha p3aHe Ha pChN IuPKyIepnCnyChete Da Kpa H da b1b6OUnHata Ha p3aHe. 3aterhe 6nokpOBkata 3a dl6OUnHata Ha p3aHe.

BHMAHHE: PpOBepTe pa3oTOnHHeTo OT Na-tpEHNr 3b6 Ha peKeunr DnCK Do npEHNr KpaHnpoUeNa 3a pr3aHe. To TpRbBa da e no-MaJIko ot 20 mm.

IopapBHe TnpDnHata CtpaHa Ha pChyHnU npKpyIep C MapKnpoBkata O KbM ONpHATA NLOOa Ha npKpyIpa I DBeTe NMOoHN MApKpO8bHHN HINH BByx Maunnnn HIO. Pn 3aHnata CtpaHa Ha pChyHn U npKpyIep CEHTpnpaiTe I NOpapBHepe XeEeHn DICK 3aeDHO C HOXa 3a pa3KNHBAhe (FNR.D.1).3a6eneKka: Hain-doPbrrt mRrnn 3a npOBepKa Ha npABnHTO IOpABnRBAHe IMate 3d HOXa 3a pa3KNHBAhe NO nocOKa Ha peKeuHn DICK, TBKATOpeXeHnT DnCK e OT No-de6en MaTePHAn, OTKoKtO To HOXa 3a pa3KNHBAe. CneI ceHTpOxBkata Ha pbHnU npKpyIap MOHTnpaTe HainHanpeD tCpAHHN OrpAanIeTJ, TaKa Ye uNATA IM NobbpXHOCT d e E B KOHTAKT C onOpHATA NLOOa HA MaunHata. CneI TOBA MOHTnpaTe Dbata npXBata (FNR.D.2).

BHMAHNE: PpOBepTe Oue BeDhBx DAnu peKeusrT dNc H a uKpyLpa e cHTpoBaH cnpMo HOka 3a pa3KNHbAHe; B npOTnBeH cIyau pTuHNT uKpyLrp Ta6Ba da ce hTPOBa HAOBO.

3aKpeneTe dpyra cTpaHa ha onOpHata nnoa. 3a ceTn MaHTPae T ha-HanpeBbNOB JbPkaC Dba cTpaHUnr OpaHUnTeR. BHIMABaTE rNATA mOBbXHOCT da e B KOHTAK C onOpHata nnoa. CneD TOBA tO cpeuOnoONHATA cTpaHa MOnTIPaTe aHAnorHIO bTbPkaC dBA cTpaHaue ORpAunHtEe. MoHTPiAte DaBa npXBAta (fir. D.3). DBaTa pNXBaTa TpRABa Da ca MOTHPAHn KONKOto Ce MOKe No-daneue No Nocoka Ha no-dlbIgata cTpaHa ha onOpHata nnoa. 3a6eKkA: Pyrtn BaPauHn Ha zakpeBaHe np PaJIWHTe OnpHn IIOUe che HAMepre Ha ctp. 13 - 15.

PerynipaneHa 6e3oNaCHOTo pa3cTOnHHe Ha HOka 3a pa3KnHbAbe n peKeuHa c WbNoHa 3a HAcTroKa.

3aTbOpTe MaunHHnHnIOT (Hr. E.1). MoHTnpaIte NOKa3ahne Ha Hpypata OTeHNn DetaNn KbM HOK a 3pa3KnHBAhe (Hr. E.2). 3aTeHETe BnHTOBete nraHnTE c HAKaTHa, KOHcTa C bEduHEHc HOKa 3a pa3KnHBAHe; MOHTnpaIte Xna6abo BNHTA n raiHaTc HAKaTHa, p3NOJKeHa noHapPeHa TnHO (Hr. E.3). Pa3XnAbete c NOMUHa HA eectorpamHM KIOu 3akpenBaHToHa HOKa 3a pa3KnHBAhe (Hr. E.4). ByTheTe HOK a 3a p3KnHBABe BepKAnHO HauOny KbM peKeuian DNCK (Hr. E.5). ByTheTe HOK a 3pa3KnHBAe KONKO tce MoKe No-HaOny KbM Hero, DOkato NOHe ENH oT 3b6hHe NapeKHe DNCK He BNeE B KOHTAKC TnOto HA WApNoHa 3a HAcToPka (DetaN E.6). 3aTeHETe p3NOJKeHa no-HanpeDraKa C HAKATKa (Hr. E.6). CnED 3aTHRaHe HA BnHTa C bBtpeueH WeCTOCh Et HAcToPba 63oNACHO p3ctOHaNE o MAcC. 5 mm ot peKeuHa nck Do HOK a 3pa3KnHBAe (Hr. E.7). CnED TOBa pa3BnIE BHTOBete Ha ApNoHa 3a HAcToPka OT HOK a 3pa3KnHBAe (Hr. E.8).

BHIMAHHE: PpOBepe Oue BeHbK daHn peKeuHrT nck Ha uPKyIpa e cHTPOBa HcPRAHO HOKa 3a pa3KNHBAhe (detaH h a pHR. E.8) I e cnaeHo beoacnoHTo pa3cTOrHHe OT MAKc. 5 mm ot peKeuHa nck DO HOKa 3a pa3KNHBAhe (detaH h a pHR. E.6); B npOTHBEN Cnyau pBCHNAT uPKyIrp TpRbBa Da ce cHTPOBa HahOBO.

BHIMAHHE: PpeHpaBota BnHaHc YEbepBaHte,Ye HOKbT 3a pa3KnHbAne H KpeNekHIne eIemEnTa 3aTeHaTHdo6pe!

BoknapeMaunnnnnaI,kaKTo e noka3aHO Ha fHr.17.Macata Beue e roTOBa 3a ctauohapno p3aHe. NObue 3a TOBa npOeTe B pa3dena 3a ctauohapno pr3ahe c pbueh uKpynr.

PerynipaneHaIbIoBuHataHa p3aHe

Pn npomHa Ha bIbOcHnHa Ha p3aHe Ha p3bHnUuKpNpR HoKbT 3a pa3KnHbAe Tp6Ba Da cepeynpa HcbTa BnOcHn, 3a da ce Ocinpyo 630anO p3a3oHnne Ote MaC.5 mm do peKeJmDnck Ha uKpNpya. Han-panep pa3xnaBete Hoka 3a pa3KnHbAe C nOmoTu Ha weetorpamHn KIOu. PerynpaiTe XeJahata Ha bIbOcHnHa Ha p3aHe Ha p3bUuUuUuKpNpR. 3aTeHtete 6bKnOpBkata 3a bIbOcHnHa Ha p3aHe. MoHTpAte I no3uOnHpaIte 7aONoHa 3a HAcToPka 3aeDHO c HOHa 3a pa3KnHbAe KaKTo e NOKa3Ho H aFir. E.1 do E.E.

BepTnKaJIHn Kocn Cpe3OBe

PnB vepnKanHtne Koc npe3oBe pUHNrT UPKyIrp Tp6Ba da ce eHTPObHaHOBO. PerynpaTe JeaenAHn bbln Ha ckOBAHe Ha pUHN IUPKYNRp. H3bnpaIte hanaD noBnKHHN npEINa3EH KANa H pUHN IUPKYNRp IN cHTprpaIte MaunHata Bbpx npouena 3a pr3aHe. Ocb0oTe 6IOkOBpKaTa 3a DIOOCHNAHa H p3aHe H pUHN IUPKYNRp IN cychete INCKA DO Kpar Ha DIOBcHATA Ha pr3aHe. 3aTeHETe 6IOkOBpKaTa 3a DIOOCHNAHa H p3aHe (FmR.F1 HfR.F2). Pa3BnTE BnTHa C BbtpweH weCTOCTeH N 3abptete HOka 3a pa3KnHbAbe, dOKaTO He ce eHTnpa CnpMo peKeuian Dack (FmR.F.3).

BHHMAHHe: PpOBepTe paactoHnETo OT ha-nPepHn3b6 Ha peKeun DaCK Do npedHn Kpa Hnpoena 3a pHa. To Tp8Ba da e no-MaKo ot 20 mm (F4).

3aTeHHe BnHTa C bTpeWeH WeCTOCTe (Hr.F.5).

BHMAHNE: LcHtpnapepeeunna DNCK, taka ye da ycnopepehen ha npouena 3a pra3ane H cbuebpeMeHHo BHMabaTe, pekeuHT dNck da e BNHaHn ceHtpnapan cnpmo HOka 3a pa3knHbaHe.

MOnTnpaIe Dbata cTpaHnHn OpAunHTeJI, Taka Ye e ZnIATA HN NobPbXHOCT da E B KOHTKT C onOpHATA nOoHa ha MaunHATA. CneTobAO MOnTnpaIe Dbata npxBbata. 3Akpenete Dpya cTpaH a OnopHATA nOoA. 3a ceNTa MOtnpaIe HAI-HanpeD bFIOBna DpbKau C dBA cTpaHnHn ORpAunHTe. BHmAbai Te ZnIATA HN NobPbXHOCT da E B KOHTKT C onOpHATA nOoA. CneT ToBA OT cpeUynonokHATA cTpaH a MoTHnpaIe anAnorHNO bTbnO bPrkau C dBA cTpaHnO HOrpAunHTe. MoTHnpaIe Dba npxBbata. Dba npxBa Tpr6Ba da ca MOtnpaHn KonKTo ce MoKe no-daneue no nocoka Ha no-dlbgrata cTpaHa Ha onOpHATA nOoA (fir. G).

BG

PeyuipaHa 6e3oNaCHOTo pa3cTOrHHe Ha HOka 3a pa3KInHbAHe n peKeUIN DnCK C WabloHa 3a HAcTpoKa.

3aTbOpTe MaunHHnI pIOT (Hr. H.1). MoHTnpAte nok3aHnE Ha nHypata OeHNn DaeHN KbM HOx 3a pa3KNHBAe (Hrr. H.2). 3aTERHETe BHTOBete nraKInTE c HAKATka, KOIO CA C bEdINHEH C HOKa 3a pa3KNHBAe; MOHTnpAte Xna6abO BNHTa H raKaTc a HAKATka, pa3NOXeHa no-HanpeHa TnTO (Hnr. H.3). PaXNa6BeTe c NOMOHTA HA WecToRpaAMNn KIOU 3akpenBaHETO HA HOx 3a pa3KNHBAe (Hnr. H.4). ByTHEt e HOx 3a pa3KNHBAe CbC bLbn Ha peKeuIN DNCK KbM peKeuIN DNCK (Hnr. H.5). ByTHEt e HOx 3a pa3KNHBAe KOIKOTO CE MOnke No-6ln30, DOkato NOHe EINOH OT 3bNTe Ha peKeuIN DNCK He BnEse B KOHTA C HACTPOKA (DeTaN H.6). 3aTERHETe pa3NOXeHa no-HanpeHa c HAKATka (Hnr. H.6). CNeD 3aTHRAE Ha BNHTC B bTpeEN WIECTOEN CE HAcTPOBA 6eONACHO pa3TONHne OT MAck. 5 mm OT peKeuIN DNCK IO HOx 3a pa3KNHBAe (Hnr. H.7). CNeD TOBA OTHOB pa3BnTE BHTOBete Ha WApNOHA 3a HAcTPOKA OT HOx 3a pa3KNHBAe. BLOKnAPte MaunHHn I pIOT, KaKO e NOKa3aHo Ha nF. 17, IN PObepete Oue BeINbck CBO6OHN XOD ha peKeuIN DNCK (Hnr. l).

BHMAHHE: PpOBepe Oue BeHbK DaIIN peKeuHrT NcK Ha uPKyHpa e cHTPOBa HcPRAHO HOKa 3a pa3KNHBAHe (detaH a PHr. I) n e cna3eHo 6e0nacHTo paoCToHHe oMk. 5 mm ot peKeuH dack do HOka 3a pa3KNHBAHe (detaH a PHr. H.6); B npOTHBEN Cnyau puchHt UPKyHrp Tp6Ba Da ce cHTPOBa HahOBO.

BHIMAHHE: Ipei npa60ta BHaTc ce yBepBaIte, ye HOKbT 3a pa3knHbAne H KpeENHHTe EEmEnTH ca 3aterHaTn do6pe!

Macata Beue e roToBa 3a cTaunOHaPn p3aHe. NoBuee 3a TOBa npOte B pa3dena 3a cTaunOHaPn p3aHe C pBuHen uPKyIep.

TapaHua

CKbnn KIneHTN,

BHe ce cdo6nHexe c edH BcOKoKaeeCTBeH wolfcraft" -npOyKt, KOIO TE Bn OocTbN yDobONCTBe npn pa60Ta c Hrro. wolfcraft" - npOyKTne TOB8aPHT Ha BcOK TExMHueCKs CTAndpt N ppeHn Da CTNHAT Do KmHNTA npeMnHABat NHTEHMBH PA3pa60TKn I TeTOBE. PO BpMe Ha cepHnHOTOn PnO3BOCTBO NOCTOHNHITE pOBEPKn INepHOHNIH NTeTOE rapaHTNAT CTAndpt OT BcKO KaeeCTBO.ColnHite texHHueckn pa3pa60TKn HnadeJHnA KauCTBeH KOHTPNB Rn aRaHTNAT CnYrPHOCCTa 3a eHa nPabINHa NOKyKn.

3a 3akynen H npdykt Ha wolfcraftHn Bn daBame rapaunz ot 10 roHN, CHTAHO ot DaTata Ha 3akynybahe, npu ycnoBne, ye ypebt Ce h3non3Ba
cmo 3a Hnpofoeohanha yntp6a. Fapauhnta oxbuaa ca mao bpein no cannm npedmet Ha noknytata, no To cmo TaKbva, KOto ce OCHOBabat
Ha hekayctbeHH MATEPANI INN HekayctBeHO npo3bOdCTBO. Taar pauunz He obxbaa HedeocTaBn IIN Bpein, B3HNKHnIopadn
HeNaJHNO 0cbNyKBaHE NINCA HA NODpKbKa. Fapauhnta He obxbaaCbIIO ANDHnHO B3NHKBaTO IOHOCBAH Ma EAPNAIA N
0bnuahHOTn Pnnp H3NON3BaHe H3HOCBAHe, KaKTo IN HeDOCTbU IN BpeIn, KOto Ca 6nII INBecTHn HA KIneHTA Pnnp CKlouBaHETO HA DOROBpa.

IapaHIOHH npTeHnMmORa da 6bDat NobdnHaTc camo npn pndctabHe Ha akTypa/DOkymeHT 3a NOKytnKa.

IpeodctabHata or wolfcraft" rapaunn He orpaunuaba BaWnte 3akOHn npaba kaTO pTe6nten (npBOHa nck 3a n3bHHeHne, paBaIaHne Hn OToHB, o63ueTeHne 3a BpeDn Hn pa3HocKn).

Ieknapaun3a cboTBcTbne no NipeKTHBa Ha EbponeeCNH Cb03 2006/42/EO, PpnoJeHHe IIA

Pa3MepBcIOXeHHOMBHe:1335x520x260MM

Paboyar nobepxHocb:780×500MM

MaKc. tonuHa n3denn: npkynpna 60 MM

Makc. npna pacnna c napannbHbim ynopom: HactonbHa npkyIrpHn 375 MM

HnAmEtP KpeNExKhbIX HATaXKhbIX OTBepCTH: 20 MM

DonyctHMaH Harpy3ka: 200 K

Bec:

17

K

CNMBONbI INx 3HaueHne

IpeynpeKdHHeO BO3MOxHOn OanchoCTN

Hntatb HNCTpyKuHNO/Yka3aHHN

HeoXOJIMO HcNoIb3OBaTb 3aunTHbIe OyKn

HeoXOJIMO HcnoIb3OBaTb 3aunTy cnyxa

HeoXIOHMO HcNlB3OBaT npTNBOJbIeByO Macky

OTknKouHeHne cTeBOrO wTeKepe

K obuien HnfoMaunu

He nCnonb3oBaTb N3dennne dnn KOnKn DpOB.

HcnoIb3yIte pyhIe zpknyIepHbIe nIIbI cIpy6nHO pe3Kn He 6one 70 MM.

IcnoBsyte pyHbIe uRpynRbIe nNbI c DnAmETpOM NOOTHa He 60nee 200 MM.

IpeaKaJdoonepauneperynpyte rnybHy pe3Kn taKIM o6pa3OM, T06bl noLIOHO HbIyBbCTynano 3a npdeJeI 3arotOBKn He 6onee Yem Ha 4 MM.

HcnoIb3yIeTOnIbKOpyHbIeUpKyIaRpbIeNnbl, OCHaueHHBe pACKINHHBaOuIM HOKOM.

IcnoB3yIte 3JIeKTPoHnHCTpyMeHTb MOUHOCTbIO He 6Oonee 2760 Bt.

HaOTMeueHHoN NIKTORpAMME npNBeDEHb rABapNTb ONOPHOI pAACTINbI pyHOn UPKyJnRHOH NINbI (raBapNTb MeHbSeH INI6OJIbWe ONOPHOI pAACTINbI).

Hhctpymehtbi dna MOHTaHa

1 KINHOC BYHTpeHHM
WcETTHrpaHHKOM: SW 5 (BXOARTB KOMNJIeKT)

2OTBeptKn:PH1,PH2 (HE BXoAR T KOMNNEKT)

3raeHbI KIOUa:SW8,10,13 (HE BXOINTB KOMNNEKT)

LENEBOE NPMMEHEHNE

MASTERcut 1500-3to MHorofoyHKUHOHaBbHpa6OuH cTOnI cTOn dAnr cTaHaKa. OH npedHa3HaueH dNra BbInonHeHH yKa3aHHb HnHex onepaun.
MoHTaKpyHOnuPcKyIrpHnNtC KINHOMHaNaHEmMaUHbPiN MaKC. dAmETpe NOnTHa NJIb200MMNMAKc.Fny6HHe p3pe3aDo70MM. IcNoJIb3eTOJbKO NIIb, COOTBCTByOuOne Yka3aHHM MaKcImaJIbHbIM Ra6apITam ONOPHn nactHbI (CM.pnc.18).TakHM o6p3OM,Bbl nonyae HeacTohlyo uKpKynApHyo NIny.
- IcnoIb3OBAHHe B KaueCTBe CToNa DnpyHOn UnpKynpHOn Nnbl6e3 KInHa. NckJIOUHTenBHO B COUeTaHH Co BCNOMRaTeNbHbIM
npncnooc6JeHem -OTdJIbHbIM KINHOM, apt. No 6903000, npn MaKcImaJbHOM dAmetpe noIoTHa nIIbl 160 MM nIupnHe pa3pe3a MHN.2,4 MM.
- NcnoIb3OBAHHe B KaueCTBe CToNa Ia pyuHOn UnpKynpHOn PnIb6e KInHa. NckNIOHTenbHO B COyETAHNN CO BCNOmOraTeNbHbIM
npncoc6neHem - OTdIbHbIM KINHOM, apT. N6 6904000, npn dIaMaTePax nonoTHa nIbl ot MmH. 161 MM do MaKc. 200 MM, uHpHHe pa3pe3a MmH. 2,4 MM n rny6HHe pa3pe3a MaKc. do 66 MM.
-IVcnonb3oBaHHe B KaueCTBe CTOna dnn pyuHoro no63nka.
IcnoB3oBAHBe B KaeeCTBE CToNA DnI Ppe3eOBaHbHO CToAHa B CoUeTAHN C npAunHeBbHM ynpom Ppe3bl, apt. No 6901000, n dIn HcTpyMeHTOB C Ppe3eOBaHBe CBePxy C NtAHmE 230 B N MoCHTOB MaKc. 1800 Bt. He cNoB3yTe Ppe3bD hAmETpOM 60JIbue 27 MM! IcnoB3oBAHBe B KaeeCTBE paOboHer cToNA DnI OpbaoTHN Detanae (HanpImep, DnI CBepNEHn, UINFOBAHnH T. d.)
Heo6xOIMO yHbBaT daHHbI, npEOCTaBnEMbI npON3BOINTeNEM, N BYINONHT bYka3AHN NO TEXHKe 6e3OnacHOCTN, DeiCTBYIOUne dInncnOJIb3yEmbIX MaUNH, a TAKKc Yka3aHnno TExNHKe 6e3OnacHOCTN, DeiCTBYIOUne dIn cToLa CTaHka.
- Pn yTnH3aun CTona MASTER cut 1500 cneDyTe MeCTbIM HopMaM no yTnH3aun.

OTBeTcBHeHcOCTb 3a yIeP6 n HeCuaCThble cnyaB CnCyae HcNoB3oBaHnA He No IeNeBOMy Ha3HaueHnIO Hecet NOnB3oBaTeNb.

RUS

06uhe yka3aHnno TeXnke 6e3onacHOCTn

CoeepnntcBc0e paooee MeTO BCHCTOe, no3abotbTecb O xopoWem OCBeueHIN. BeCnpaOK HIN HeoctatoHoe OCBeueHne pa6oeryo MeTaMOyT npNBCTN K HeuchactHomy Cnyauo.

He hncnbl3yte 3eKTPoHCTpyMeHTb BO B3pbBoONaCHO aTMocfepe, cOepKaue Tropohne HIOKOCTN, Ra3b IIN PbIb. 3eKTPoHCTpyMeHTb CO3daOT NcKpbl, KOTOpBle MOYr npHBecTN K BO3rpaHNO PbIM ININ napOB.

He nCnoB3yIte 3neKtpOnHCTpyMeHTb B6n3n Deten H Apyrnx IIOeE. Ecn Bbl CnyaHNO OTBneyeTeCb, Bbl MoXeTe NOTePrtb KOHTpOJIb HAD HCHTPyMeHTOM.

LHTENcEB 3eKTKPOINHCTPymeHTA DOJHKe HDOXODNTB K PO3ETKE. B LHTENcEB HeJIb3B HBOCHNTB KaKe-1n60 hM3MeHENH. He I cNOnIb3yIte aadantpebl npn pa6ote C 3a3eMJIReMbIMM 3JeKTKPOINHCTpyMeHTaMn. PpImeHeHHe HaJIeKaUHX UTeCenE n pO3ETOK CHMkaET onaHOCtB noIyHEny ydapa TOKOM.

3aunuainte 3eKtpOnHcTpymEnbI OT DOxN BnAri. PonaadHne BODbB 3eKtpOnHcTpymEnT NOBbIAaET ONaCHocb NOnyehn ydapa TOKOM.

Paotar c 3eKtpounHcymentom nO tKpbItbIM He6oM,NCIOB3yTe yDHHHTENI, npEHa3HaueHHbIe IINI pImHeHHa YnIe. NcnoIbSOBaHne HAdnEkaUero yDHHHTENI CHNKAeT OAnCHOCT bNoJyEHnYdapa TOKOM.

EcHnBAM Heo6xOIMO pa60taTc 3NEKTOHCTpyMeHToM npN NOBbIeHHo BnAHOCTu, HcNoJIb3yTe aBTOMaT 3auHTHO OTKIOeHn. PImMeHeHne ABOTMA tAaHTHO TOKIOueHn CHMaET OAnCHOCTb NOnyEHn Ydapa TOKOM.

BbIte BHMATEbH, y6dTeCb, 10B bIeHTBeTpe pABHbHO n CoBDIOAte octoPONCTb npn paOte CJeKTPONHCTpyMeHToM. He HcNOnb3yTe 3eNTPOHNCTpymHe, ecn Bly cTaN nn HaxoHTeBn Dne JcETBmE NapKOTUeCHnx BeueCTB. anKORON nn leKapCTB. CekyHdHa HEBHMATEbHOtbpnnkTIaTauNN 3eKTPONHCTpyMeHAn MOKeT npMBeTc K TRAKJIbMaM.

NcnoBbOaBb HnIeKaaIe CpeCTBa HINIBHyaIbHOH 3auHTbI 3auHTbI OHN, CpeCTBa 3auHTbI cnyxA, peCnIparOp (pnp BInONHeHH paBOT, CB3AHHx C bblpocom 60JIbIOrO KOINHCTBa NII) I 3auHTbI pykABuI (pnp o6pa6OTKe MATEpHAnOB C rpy6o NOBepXHO H CMeHe INCTpyMEnHa).

Ipeep BkIOUeHmE 3JKeTPOPnBOpopa ydaJIte peytnpOBOuHbIe HcTpMeHT bI IINraeHbIe KIOU. HcTpMeHT IIIN raeHbIe KIOU, HaxoAunCBA BO BpaauHOEMcY3NE 3JKeTPOPnpOba, MOKET npNBecTN K TReKeblM TpaBMAM.

Bb6paTne IaI pa60tI npabInbHyO OeKdy. He HcHte npocToHpyo OeKdy IINy yKpaSeHH. Dejkhte BOnCS, OeKdy n nepaTHN B OTdAeHHnOTpNNHbXyactei 3NeKtpOnHCTpyMeHTA. PpocToHra OeKda, YKpaSeHHN IIN dnnHbIe BOnCS MoryT 3anyTaBcR B NOBmKhbix y3nx

• HcnoIb3yIte Bcerda 3aunTHbIKoIIaK npH cNoIb3OBAHH nbineOTc0ca.

He nCnOJb3yIte 3eKTPoHCTpyMeHT C HeNCnPabBbIM BbIKIOUaTeIeM. 3eKTPoHCTpyMeHT, KOtOpbH HeJIb3A BkIOuHTb INN BbIKIOUHTb, npedctabnnet c600 onaCHOCTb N NOJNEKHT pEMOTy.

XpaHHTe HcHcNoB3yEmble 3NEKTPoHnCTpyMeHTb BHe DocraAemocTH Detet. He No3BOJrte npHMehrTa 3NEKTPoHnCTpyMeHTnIaM, He 3HaKOMbIM C Hm Hn HpOHTabHm HAcTOrue pyKOBoCTBO. 3NEKTPoHnCTpyMeHTb, HcNOB3yEmble HEONbTHbIMn IHObMb, ONaChbl.

• PapeHauanom paobot npoBepntb paobotocnoc6Hoctb 6OpyoBaHHN INHCTpyMeHTOB. KaTeropueeCKN 3aPpeuaetcN cNoIb3OBA TbIOBpeKDeHHN HININ 3aTyIeHHN INHCTpyMeHT.

Pemont BaIeero 3neKTPoHnCTpyMeHTa DOnJek HocUyIeCTBnTbCnKIIHO KBaIINuPObaHbIM NepcoHAnOM C HcNoJIb3OBAHHeM ToJIbKO opHHaHbHbX 3anaChbIX qactEi. HaNekKauee npOBeHHe Pemonta oecneuBaet coxpaHHe 630NaCHOCTn 3neKTPoHnCTpyMeHTa.

• Ipeepn HactpoKo np6opOBu nH 3aMeHO npHnHaONeKHOCTe BbTAckBaTe CeTOB O uTEKeH pO3eTKn H/INn H3 3JIeKTPoHcTpyMeHTa. HenpeDnHapeHoe BKIOUChEHe 3NEKTPoHcTpyMeHTa MOKeT RbIeTcnpuHOn dIra TpaBM.

Cneinte, yTo6bBepctak 6bl npabnIbHo cO6paH, TOnbKO nocLe 3TOrHaunHaeMe MOHTaK 3NeKtpoHCTpyMeHOB. PpaBnIbHa C6Opka Bepctaka npHHnnaHbHO BaHnA, YTo6b KOHcTpyKu npn 3KnnyatauH He o6pynnacb.

3AkpeHnE HADJXHO NJEKTOPHNCTPymETHa pa6Ooh JIOBEPXHOCTBepCTACA, pIeXeJe CM BY HAJIeTHe 3KCHNJAYATAUHO. PdAnBHXHOCTbNtPOTHNCTPymHTa Ha pa6Ooh JIOBEPXHOCTMOKeTpNNIECTK NOTepe KOHTPON3A pa6OToH.

• YctaHabnBaIte Bepctak Ha TbepyHo, poBHyIO rOpnsOHTaIbHyIO NOBepxHocTb. EcnBepctak kauaetc HIN npockan3bIbaet, 3arotOBKa He MOKET 6bITb paBHOMepHO HADExHIO o6pa6oTaHa.

HepepykaheBepctak HHeHcnoIb3yteeroKaKecTHuCyHnLeca.Peeppy3KaHnCToHHeHaBepCTakeMoryT npBecTHK CMeueHHO ceHTpa TReKeCTCtOna n erO npOKnDbBaHHO.

He pa6oTaIe Ha BepCTake C npyHM MATEPHaIaMn, KpOme DpeBecHbI NERKoo6paBaTbIaEMo INaCTMaCCbI. NcKIOueHHe: ToIbKO ecHb Blpa6oTaTe NO63NkOM C pekOMeHdyEmo DnI TAKHX MATEPHaIaOB NINKOn, 3TO KACAETCR NERKO NODaHOxXCR pe3y MetAnIOB (HanPMeP, anHomHN).

Kateropueckn 3anpee no ydantb pykoi bnoa npoero nnbhoro nna KNOBHOUECA OTOXDBI, TANHE KAOKOKN, CTpyjka, ZEN

-нспьзуемо obopyдоваиме должно cootbetctBOBaT b cTahdapram DIN EN 60745-1 YcToPcTBa c roda BbyNcKa 1995 donkhhb Imetb 3nak CE.

• He ninnte " rnoi pyko", t.e. Bby hncnobsye npn pa6oTe npaannenbHbI ynpn nn yrnoBOny npop, a He BeDeTe detaB pyko.

• PONTOH NINBI NOCNE BIKNUOENH INPUBODA 3ANPEUaETCn pINTOPMAKHNBaTb npHXaTHe NpeDMTeB K 6OKOBNOBEPXHOCTN NOIOTHA!

Heo6xOIMO HCIOJIb3OBaTb HHTpyMeHT TOnbKO B COOTBeTCTBnC ERO HA3HaueHHeM.

• IcnoIb3OBA TbONKo NnBHe NOOTHa, HaxOJaUeCeB B 6e3ynpeHOM COCTOHN. KopNyc nOToHa He DOnJKeH 6bTb TOnIe paKINHBAIOeHOKa, a WnpHa pa3BOa He DoJIkHa 6bTb MeHbSe ToIuHHb HOka.

• Peryarnpno KOHTponpoBaTb 3aTAAKy BCEx BNHTOB!

Bepctak kateropnueckn 3anpeaetc nnonb30baTb c hapyuHHe m npabn 3knnyataun Hne no ha3naeHIO!

HaBepctake He donxHHb HaxoHtbc NoCTOpOHHe npEmTebl.

He nCnObn30BaTn3DeneAaKoNKn ApOB.

He nCnoB3OBaTb pa6OuN cTOn dJa 06pa6OTKn KpyrIoro nnIOMATEpHana.

BknoueHne n Bkiuoyehne HcnoNb3yeMOro 3nEaKTPoHHCTpyMeHTa DOJIHKHO OCUJECTBIAITbCA TOnIbKO npedoxpaHHTeJIbHbIM BblKIOUaTeJeM.

-ДяФИКСАПANAPATHOROBbIKHOUATEBINONOXEHIN“BKN. INCNoIb3ObAToTobko npnlaRaemblaKMMdNBAKIOUeHIM

• Pn 06pa60Ke y3KNX 3aROTOBOK 06R3aTeNbHO NOnb3OBaTbCRA WTOKOM-TONKaTeJIEM.

• Ecnn OH He Hcnonb3yETCA, DnXpaHHe BwAte WtOK dNn nepMeueHHa Detanen Ha npedymOTpeHHb dNn 3TOro depKaTeB (pnc.8).

-86eHTecb TOM, yTO O6a NOBOPoTHbIX DEpKaTeINI KpeNHeHn HOKeK CTOna C npDeoxpaHTeBbIMN 60NTAMN yCTaHOBnEbl B OTBePcTmX B 6OKOBOu cACTn HTO BnHTbC pyKoRTKO HAeHXO 3aTRHYtB (pnc. 15.3).

IpeB DBOOM B 3KcNpyatauH0 y6dntecb B TOM, yO pyuH HUIKPNHPA Hnna, NHTpyMeH Tn IpEe9oBaHn Cbepy Hn pyH O53NK HnndKeKaumm Opbazom 3akpenlenb Ha naHeM MaunHb YTO nactHa MaunHb HadeXHO 3akpenleHa B BHeMke CTOna dTnCTaHk ATO WcETMrpaHn KIOU BCTABNe HDOONHITBeHONHOFHKn (Pc.17.3).

-He nnonb3ynte cTOn dIa nnbl Ha OTKpbITOM Bo3dyXe BO BpEmrdo

• Co6IIOdaIte MaKcHMaJIbHbIe rAbapITbI o6paBaTaIbAembIX DeTaN (CM. pa3Den «TexHnueckne daHbIe»).

IPABHNA TEXHNKNE3ONACHOCTN PPN PABOTE C UHPKUYIAPHBIMN NINAMN

Kpome ykaaHHbix pahee npabnTexHNI 6e3oNaCHOCHT, OTHOCAUHXcK ONNCbIbAeMOMy H3dEINIO, 6raTeNbHO co6JIIOaTb npabnIa TexHNI 6e3oNaCHOCTn drrnpmehReBIX pyhIX uPKyIrpHbIX nII.

• IcnoBbTaTb TOnbKO pyHbIe uKpyAepHbIe Nnblc paKnnHBAIOHM HOKOM, MaKc. dnaMeTpom nHbHO rnoTHa 200 MM mMaKc. rny6HHoR pe3a 70 MM.

RUS

• IcnoIb3oBaTb TOnbKO nIbI c pa3MepaAMn B npdeJax yKa3aHHbIX MaKCHMaJIbHbIX pa3MepoB onOpHO nnITb (cm. pnc. 18).
  -3KcnnyatnpoBaTb HactOblHbIe UnpkynpHbIe NnblToNbKO CHaDneKaUIM 06pa3OM 3aKpeNneHHbIM 3aunTHbIM KOxyXOM
  BHIMAHHE: PpOeBpTe, yCTaHOBHeHO IINIIOTHo UPKyIepHO NIIbI npAIIeJIbHO Ipope3n IINIbI, INPn Heo6xOHNOCn BblpoBHTe pyHHyO uKpyHpyHny nNHy 3aHO.
• PndepKnBaTb NnN noDnnpaTb DnHHBte 3arotOBKn CO CTOpHb npneMkn TAKM O6pa30m, YTO6bl OHn paCnOraIncb Ha Bepctake ropn3oHTaJIbHO (Hanp., pN nOMOnu polNKOBn noCTabKn wolfcraft, apt. NQ 6119973).
  He donyckatb neperpy3ok pyuHOn dNcKOBo nnilb.
• HcnoB30BaHHe WmHFOBaJIbHbIX KpyroB 3anpeeHo.
• NcnoB3OBaTb TOnbKO peKOMeHnyEmble nIbHbIe NOIOTHa, NOIbIpaar Ix B COOTBetCTBn C O6paBaTBaEBMaM MATEpHaIOM.
• ONACHOCTb: He np6nKATbC pykAM K oBnactn pacnna H He kacatcbnHBO nONoTHa.
• He pa3meuatab pykn noI 3aHTbHe KOHXy HE cMOxET 3aHTb pykn OT NnBHO rnoTHa, eON OH HaxoTcN oI 3aTOBkoN.
  PerynpoBAtIy6Hnype3aBCOTBETCTBnCToJIuHOn3arotOBKn.IINa donKHa BixOAnb 3a HxKHO 占ctb 3arotOBKn MeHee qem Ha NoHyO BlicOtY 3y6a.
• Pn pa6ote Heo6x0nMo Bcerda 6bItb roTOBbIM K TOMy, yTo NInbHoe NOnOTHO MOKeT 3axBaNTb 3arOTOBky H OTbPOcHTb ee K pa6OtaUoMeMy C nHCTpyMeHtOM.
• Oτιαγα ένβητερεγηλυτόσι Μεπραβυνθόο ὄνην Εηαδηκαμερο πριμενηρας Ανύλι. Λιρ πρεδοβραςενησι Οταχι Σζεγετ πρινημαθο Θηκανην Μερβι πρεδοctopoxkθocTH.
  YdRpKbBabTnHnObeHHmPykAMn. IIOONKeHHe Pyk BbIbPaTb TakmM Opa3Am. QTOb6I MoXHO bIbHO HAdEHXBO C0PnHIMMatb BO3HnKaOuHMe YcHnHr OTaHn. BcERda pacnonarBaCb cOky ot NnHbOro nOtonHa. OHO Hn B KOem cNyuee HaOnHKO HaxOJTHCBa HAOnOH NnHN C TeOM. PIn OTaJa DnKOBABnn MOnKetOTOKoHTb HAZad, ODAHKn pRn cO6nOdeHH npabnn paBoTb onepATb COctOHHN KOnPnHOBAPBb YcHHn OTaDHn.
  Bcnyae 3aklnnHBAHnnbHoro nnono Hn 3aepneHnpaobt bkyknohnty uy ydepHXBaTHNCHPTyMeHT 3aTOBOKE DO OCTAHOBKn Hn B KOEM clyae He nbIATbc N3BNEuy hNy 3aTOBOKn Hn OTBeCTHnHCTpyMeHT Ha3a-d -3TO MOKET pInBcTn K dyap. Pn3AknHBAHnHeO6xDoIMOnOpEeNTbNvCTPAHNTpNNHBOHO NOOTHa.
  PepdB KIOHHEHNbI, HAXOJIeCECB 3aROTOBKE, BbPOBHb NpOTHO NO eHTpy npONINA y6EINbCR B TOM, YTO 3y6Ba H3ACTPnB IN 3aROTOBKe. Pcyck nblc 3aKNIHHBIM INh bHM INONTHOM MOKET pINBECTK BbCKaIKBAHNO HNCTpyMeHTA IN 3aTOTOBKN INNBO3HHKOBHeH0 OTaDNa.
  Bo 36eJHnne OtDaun BcNDbTBe 3aKnHnBaHn PnHbHOrO NpOnTHa npn o6pa0Te KpyHnHoOpMaTHbX 3aTOBok (PnHT) Heo6xoHmO HndKxuHmOBpa30nOIOHpaIbHX. KpyNHe IINHbMOrY pOrHybCnOd EeCTBHeHOrO Beca. PInHb Heo6xOHNMo nOtnHpTa c 6obHex cToPOH -Kak B6nHn npOnHa, TaK u y kpaE.
  -1cnoIb3OBaHHe 3aTyIeHHbIX HINIOBpeHxNINbHbX NIOTeH 3anPeueHo. INbHbIE NOIOnTHa C 3aTyIeHHbIMn Hn HnepaBnBHO pa3BeHbIMn 3y6bAMn FOpmMpyOT CNIKKpONH, YTO pNBOHNT K NOBbIeHHOM TpeHNO, 3aKaTHO NOIOnTHA OITDAye.
  IpeH naHOM paObTo 3aFHKcnPOBaT bpeYnPOBKN rnybHb yrTa pe3Kn. NOnbTKa n3MeHeHH peryNPOBOK BO BpEM RaobTo bnn MoHET npBecTH K 3aKINHBaHNIO NIIbHO rnoNoTHA IN Bo3NKHOBEHNIO OTdAH.
  Cobnndbocbyo octopoknoctbpnppe3ke "norgyKeHHem" cyueCTByouux CTeh n npyrnx 06beKTOB C orpaHnueHHbIM 6Opom.
  BxOauee B MaTePnA nnbHoe nonoTHo MoKet 6bItb 3a6JIOkpObaHO CKpbITbIMN OBeKTAMN (OnaCHOCTb OTdauN).
• Pn npope3ke na3OB n KaHbOK 6R3aTeNbHO nCnONb3yIe ToKaTeNb, TaK KaNnOToHnNbIh HaxoDITc npn 3OM BHe BaWero nOra 3peHna.

ПРавиЛА TEХИКИ БЕЗОПACHEСТИ ПИР PABOTE C ЗЛЕKTPOЛБИКAMN

Kpome daHHbIX npaBnI TexHnIK 630NaCHOCHTN,OTHOChuxcK ONCbBAEMOMY n3dEINIO,OB3aTeNbHO Co6JIOaTb npaBnIaTexHnIK 630NaCHOCTN DnI pImHeMaEBX 3NEKTPoNO63HOB.
Kateropueeckn 3anpeuaetcpa60ta b c noBpeKdEHHbIM 3JIeKtpoJIO6HkOM.
- He donyckatb neperpy3kn 3neKtpoNo6nka.

BHIMAHNE: HNCIOJIb3OBATb KAK ΦPE3EPOBOUHbI CTOJI TOJIbKO B KOMJIJEKTE C IAPALJIeJIbHbIM YIOPOM APT. 6901000

INPABHNA TEXHNK B3OJACHOCTN INP N PABOTE CΦPE3AMNC BEPXHM PACNOJIOXHEHEM IHCTPYMEHTA

Kpome daHHbIX npaBnI TeXHnK 6e3oNaChOCTN, OTHOCAUxC K ONCbIAeMOMy I3dEINHO, 6raTeNbHO Co6JIOnDaTb npaBnIaTexHnK 6e3oNaChOCTN DnA Ppe3 C BepxHM paCNOJOKeHHeM HcHTpyMeHa.
Heo6xOIMO Bcerda 6bIb roTOBbIM K TOMy, yTo BO BpeMRA ppe3epOBaHn 3arotOBKa MOXeT HeoKHaHHO BbIn Ns-NOd KOHTpONy yDapNTb onepatopa.
PaOuyn cTOn 3anpeaaetcNcnonb3oBaTb dna dyroBoro OpeepoBAHnI
Bo 36eKaHHe Bo3nKHOBeHHr OTdauN KOhta PyKn C fpe3o npOboHTb fpe3epoBOHbIe pa60bT ToBko C nCnOJIb3OBaHem npapnnelbHor O ppe3epoBOOHOr ynpopa (apt. N6 6901000), BxOJUero B KOMIIeT npHaNDJeKHOCTe.
Cobnado npabna moTaKa npaennbHoro fpeepoBouHoro ynopa (apr. No 6901000), npnbdeHHbe B pykoBodCTBe no 3KcnnyatauH.
He nCnoB3OBaTb Fpe3epoBOHn HnCTpyMeHT MoUHOCTbO Bblwe 1800 Bn HnpanjKeHNem nntaHa 6oJee 230 B.
-He nCnoB3oBaTb fpe3epoBOuHbIn HcTpymENT C dNaMeTpom 60onee 27 MM!
-ПодачадолжнocушсьтбТольк npotNB HanpaBHeHn BpaueHnФpe3bI.

PobBxOHNX B KOMNNEKNT NOCTABKN BknaHbIX KOUEI DOLJIeH OcyueCTBnTcB C COOTBeTCTBnC pa3MePOM Ppe3epoBOyHO rHCTpyMeHTa. Beonachn Hn HaeHHa pa60ta oecneuBaetc npn nCNoJIb3ObaHHn HnmeHbWero n 03 Bo3MOKbHex KOUE.
- IcnoIb3oBaTb TOnbKO 3aToeHHbIe. O6CnyKeHHbIe INOTpeRyINpOBAHHbIe cOrnaCHO IHCTpyKUHm pON3BODInTeJI Phpe3epoBOHbIe HHTpyMeHTbl.
- Pn 3Kcnnyataunu o6opuydoabnH u HCTpyMeHTa coBnOaTb MmMmaIbHyIO MaKcmMaIbHyIO qACTOTy BpaueHH, a TAKKe HappaBHeHnBpaueHH (yKa3aHO Ha N3dEHH, yNaKOBKe INN B pyKOBOCTBe NO 3Kcnnyataunu).
CneyET NOMHtB, YTO HnpabNbHOE NcONb3OBaHHe Ppe3epoBOHOro IHCTpyMeHa, 3aROTOBOK INPNCIOOeHm dINBedeHHa 3aROTOBMOKET PnBEcT K BO3HNHOBeHNO ONaCHbIX CNTyaU.
- PnH ppe3epoBaHH B6n3n ynpa He np6nKaTb pyKn K ppe3epoBOOHOMy HNCTpyMeHTy.
BoBpeMaepoBaHnnoB03MOKHOCTnBdoONHeHneKnapaJIeNbHOMyynopyNCIOb3OBAt npINKHMhIE KOJOnk.
-Bo 66eHAnHe OnaChbX ChTuAun C HekOHtPOnIpyEmBm OnpokMbBaHnEM o6ecneHTb NpIMpaHMe JINHHbX 3aT0TOBOK HA cToPOHe npHEMKN. Onopa DOnKb6b8 CTabNbHO n MeTb BcOTy, paBHyO BcOTe paOoyero cTOna (Hanp., HcONb3OBaTb pONIKOByIO NOCTABky c apt. No 6119973).
- 06paabaTbTaT bToTOBKn, pa3Mep H Macca KOTOpbIX N03BOJAIOT OcyIeCTBnA Tbe3ONaChoe ydePahHne HBeDHeHn X ODHIM YenOBekOM.
Iopbapbactoty BpaenHn B COOTBETCTBN C INHTpyMeHtOM 3aT0Bko. ToHbIe DaHbIe OTHOCTeJIbHO aACTOTbI BpaueHn MOKHO HAHTB pykOBoCTBe NO 3KcNpyataun Hpe3bl C BepxHm paCNOJKeHHem INCTpyMeHtA.
- CoBnIOaTb MaKcHMaJIbHbIe pa3Mepebl 3aRTOBOK (cm. TexHnueckne xapaKTePncTHKn).

RUS

OBbEMIOCTABKN

H3BnKHTe cTOn MASTER cut 1500 n3 Kopo6Kn H npOBepbTe nonHoe HauHne Bcex DeTaney, yKa3aHHbx Ha pncyHKax (pnc. 1 n 2).

BA3OBbIMOHTAHK

C6opka cTOna: NonoHnTe cToneuHnUy Ha pOBHyIO uCTyIO NOBepxHOCTb. PpIKpeNTe nepeDHIoN npay HOKe HNNHOO paCnpKy BCEMN KpeENKbIMn DetanMM, Ka NKa3aHO HA pNCYHKe. CneIte 3a TEM, YTObI bOa 3aONpHbIX pbYarA 8CTAHOBHeB B PhKcATOpHbIX OTBepCTHX NTObI OBA bHTA C pyKOrkO bHIn HADeEHO 3aTHyTB (Pnc. 3.1). 3aTEM yCTAOHObTE 3aHIHO npay HOKe H BTOpy HOHHIO paCnpKy. Danee 3aKpeNTe o6 NepeONbX pacOpKn ChauHa NApeDNe Nape HOKe, 3aTEM nepeBeDnTe 3aHIIO npay HOKe B cepXHee nOJooHEH N a3KePNTe npOtnBOONOKHbIE KOHbI O6eHX NopePNbIX pacOpOK (Pnc. 3.2). 3aTEM HAdHeTe Dba HOHbIX byFepa C pOINkAMn Ha 3aHIHO npay HOKe, A DBa OCTaJIbHbIX - Ha nepeDNIo npay HOKe (Pnc. 3.3).

BHIMAHHE: Cneinte 3a tem, Tc06bI yka3aHbIe B INCTpyKuIN KpeENHbIe Detanu 6bln 3aTHyTbC TaKIM YCHINEM, Tc06bl CTONCKAdbBaNC c nERKM CONpOTNBHeHem. Bcerda npOBepaHTeBbIX PnEOxpaHHTenbHbIX FHKcatopBA NaSbI HaDeKHO N3aTHyTb BNHTb C pyKOHTKoN.

Tenepb MOKHO NOCTABNTb CTOn HA HOKKN.

BHIMAHHE: Cneinte 3a tem, tObI He 3aueMHTb pyKn npn cKnaDbIBaHH n paKnaDbIBaHH n cToln npn nobOpaHbAHn n pactn HbMaunHb.

TcKn:YctAHOBHTe TcCKn Ha cTone cTaHka, KaK nokaHa h pncyHke. TcCKn MOxHO MoTHPOBaTc npaBoHnn neBoB CTOpObH (pnc.4).

PpeOxpaHnteBbHbBikHOaTeB;YcTaHOBtpepeoxpahnteBbHbBkiIOaTeBHa cTone cTAHka, KaK noka3aHO ha pncyHKe (pnc.5).

3aunTHa KpUka: Chayana ocuieCTBnE MOHTAK OTdIbHbIX DeTaeN 3auTHOH KpUk. 3aTeM no HapBaHoue BCTabBe TepKaTeN b 3auTHOH KpUkB aIhOMHHBn IpoΦnB n 3aTHHe O6a BNHTC BHYTpEHMM WcETrpaHHKOM C NOMUbIO WeCTrpaHHORO KHOa (PNC.6).

3aKMM BKNIOHEN: PnBRAKHTe OINH KOHeU UHpya K OTBepCTNIO 3aKHMBA BKNIOHEN, a pyroK KOHeU - K CKO6e 3aunTHo KpbIHK (PNC.7).

LTOK DnepemeeHn HaeHbTe ToK Ha depKahtenb (pnc.8).

Yrnoy np: YcAHOte yroboynop, kak nokaaHO ha pcunHke (pnc. 9). B aBNCMOCTn OT bICOTb opaabTBAeMoN detanm MOHT NoaOoBtcb hmeHeHne noonKeHnA liomHHBO BO ynpa. Pn Hbcote obaTaBaeMoN detanm ot 15 MM ycTAHOBte ynpa Hpe6po (pnc. 9.1). PnBcote obaTaBaeMoN detanm do 15 MM ycTAHOBte ynpa leka (pnc. 9.1). YrnoBoynop HanpaBnRer Detanl, nepemeuaarbc no HanpaBnHOsemy na3y (pnc. 9.3).

Papannenbnyop: YcTaHOBte depKaTeNb ynpa, Ka nokasaHa ha pncyHke (pnc. 10.1). Bctabte oba BNHTa n3akpennte KBApaTHBMn raKAMn, He 3aTnBaH (pnc. 10.2). BCTabte aHOMnHeBbY np, Ka nokasaHa ha pncyHke, n 3aTnHtBe BNhtb (pnc. 10.3). 3atm BCTabte napannenbHyop B HappaBnOuYo N 3aTnHtBe BNHTb C pykortko (pnc. 10.4).

BHIMAHHE: BnOKpOBKa nnactHb MaunHb: JecTnPaHHb KIOU cyKHT nI pyeOxpaHHeBHO 6nOKpOBKn nactHb MaunHb. H nepe KaKdo pa6oto er HoEooHMO BCTaBnB CTOB nNoJKeHne "lock" (3a6nKpOBaHo), KOtOpoe nok3aHa Ha pcyHke (pnc.11).

BctabHbke KOBua: Oba BCTaBbIX KObua cnykat nla Baue 6e3onacHocTH npn fpeepoBaHH CBepx. Bcerda Bbl6paTe HAMMeHbwe BcTabHOe KObU, noXOJraee dnn HCNoB3yEmo fpe3b (pnc. 12).

PnXBaTb: BCTaBte PnXBaTb B npocBepHeHHbe OTBepCTH. PnXBaTb B COeTaHm C TnCKAMn CnyKAT Dn PHKcaHm 06paBaTaBaemx DeTanei.

CKIaIbIBAHNE IN PACKJIaIbIBAHNE CTOJIA

BHMAHNE:peepcknaibbahnem cTOna o6raateIbHO 3BleKIne wTeNCelHyIO Bnky n3 po3TK, a Bnky yCTpoiCTBa

CknabheOcna6bte 06a BnHTa C pykoTko HactoIbKO, TtobMoKHO bno OTHyH NOBepHyb o6 bnokpObohix pbyara (pnc.14.1). 3aTe m cnoHite cToB n HapabLeHHy, yka3aHOM cTpeJIKo. B ceJnx 6eOanacOCTn cneJeTHe 3a Tem, tO6bH hora haxOniAcb Ha HOxHM 6yFpe (kak nokaHaHO npCynHe, tO6b cToB He cKob3nn no NOBepXoCTn (pnc.14.2). POnIKu B HOKbIX amOptnaTopax cnYkat dIner Kho TpaCNoptipOBKn (pnc.14.3).

PacnlaBbHHe; KpEnIO DeKHTe CTOnI pyKaMn I NoCTaBtE Hory HA NcHOH OByFep, KaN Oka3HO Ha PcYHKe (PcH. 15.1). IbOpauBaHte CTOn I BnapAaBHeN, yka3aHOM CTpeIKo, nOKa OH ne Pa3oJoxKHTc NOINHOCTbO (PcH. 15.2). 3aTeM HAKMTpe HApneDHN KpaI cTcra, TOb6bloteuHua BOuHa bNa8i. BctaBtE o6a 6LnKpOBOUbHbIX BuHara B OTBePCTnI 3aTAtHE O6bHaHTe O6bHaHTC pcykortKn (PcH. 15.3).

IIOIIGOTOBKA K YCTAHOBKEMAUHHbI

BHIMAHHE: B 3TOM pa3dene OONcBbAeTcR BCKpbITHe H 3aKpbITHe PnactHbI MaunHbI nepe Pa6ToI. 3Ty npoueDpy Heo6xOIMO BBIOJIHTb pRn KaKDo CMHe MaunHbI.

BckpbTne pnaactnHbMaunHbI nra MoHTaxkHbX paOOT; N3BneKIne weCTnrpaHHbIKIOpOxpaHTenbHOJ 6IOKpOBKn. NobepHnTe oba nnactMcoCBbX pbYara BBePx cIerka npnoDnHmnte PnactHy MaunHb Ha psHarax. NobopauBaHte pnactHy MaunHb B OTMeueHHOM CTpeKoHnPaBHeNdo bOpEHHa HorO noNoEHHa, 3aTeM noDBHbTe ee BnpeD do ynpora. 3aTeM nobopauaBaTe pnaCTHy MaunHb daJIbSe, noka OH he beDyctOHBO neKaTa h CTone (pnc.16).

RUS

BHIMAHHE: O6aTeBHO CNEHTE 3a TEM, YTObI naBcI BO BpEMr BblONHeHry yKa3aHHbIX MaHnpynHr He nonan NoI pAACTHy MaunHbI (onachOCTb paHENH).

3aKpbTHe NnactHbMaunHbNoCne MOHTaKa MaunHb:Cnerka npnoDHNMITE nactHy MaunHb. 3aTeOM OHOBPemHo OTTRHHe ee noNHOCTbHO H3aI INpeBEBnTE B BPNTKaBnOe NOJKeHne DO 3aHrero ynpa. YdepXnBaIte PnactHy MaunHb Ha 06oX nactMaCCOBbx PbUarax I NOBEPHTe ee OBtMeueHHom CTpeIKoH HanpaBHeHH, NOKA OH He YcTaHOBITc HAD Na3aMn. DeJeCTBy CBepyx, BBeHnTe PnactHy MaunHb B nAaHre O6aNactMaCCOBbx PbUra. BCTabTe WeCTmPpAHnKKnOu B npedoxpaHntleBHO rHe3do, TTO6b3aBnKpOBatb NnactHy MaunHb (pnc.17).

MOHTAH PUYHOI LHPKUYPHOI NJIbI

BckpoTe INaCTHy MaunHb B COOTBETCTBN C pnc.16.

OcTynbIe IINCnOJIb3OBAHnpyHbIe UINPKyIaRbHbIe NINbI; MaKCHMaJIbHbIe RaBapITbIOCTynHbIX IINcNOnIb3OBAHnpyHbIX INPcYIaRbHbIX NINcm. Ha pnc.18.IcNoJIb3yIte ToJIbKO pyHbIe UINPKyIaRbHbIe NINbIC KINHom,MAKC. dNaMeTp PNOHTHa NINbl 200 MM MAMC. rny6Ha pa3pe3a do 70 MM.

MoHTaN HbipabHbHaHne pyHOn cIpyKyIpaHOn nHb: OToDBHHbTe oTKnHHe 3arpaKaDeHne pyHOn cIpyKyIpaHOn nHbHa3ad nYctaHOBte MaunHy no ceHTpy B npoe3b dnnnbl. Ocna6Be tCtOnp rnybHb pape3a pyHOn cIpyKyIpaHOn nHb YcTAHOBte nHny Ha nonHyo rnybpa3ea (pnc.18.2). 3aTnHte TcON pny6bHb pa3pe3a. BbpoBnHe puyHyIO npKpyIpaHyIO nHy TaKm o6p3om, YTO6bl Oha bla yCTaHOBneHa no ceHTpy n napannelbHo npoe3n dnnnbl.

BHMAHHE: PpOBepbte paCCToAHne OT MAKcHMaJIbHo BbIbHyTOBnpeD 3y6ua NIOHO TcKpyIaRHO NINbI DO npeEHe KpOMKn npope3n DnA pNInb. 3To paCCToAHne DOJIKNHO COCTABJIb MeHbue 20 MM.

PnHmep MoHTaKa IaMaWuH C HeBcBwMm ONOpHBIMnIaCTHaMn.

BbipOBHnB nONOKHeMaHNb, Chayana yCTaHOBtbe 6o6KObXy npopa TaKIM Opa3OM, YTObI OHN NO BcE NIOUADi KOHTAIPOBaN C ONOPHOI pAACTHOH MaHNb. DAnee yCTaHOBte 06a npxBA (pnc. 18.3). 3Akpenite ONDy CTOpBOH ONOPHOI pAACTHb. DnT OTO CHaHaY cTAHOBITE yrBOB DEPKATe b CByM BOKOBIM NyopAMC. CNeIeNTa TEM, YTObI NyopB NO BcE NIOUADi KOHTAIPOBaN C ONOPHOI pAACTHOH. 3Atem AHANOTHMbO MPa3oam OCTAOHBe YrBOB DEPKATe b CByM BOKOBIM NyopAMM H Na pOtnBOONOKNOH CTOpOE. YCTAHOBITE 06a npxBA t (pnc. 18.4). Oba npxBA tdoNkHb 6bItb yCTaHOBHe kak MOKH DoJIbWe No HAnpabNEHMO K BoJee DNHHO CTOpOE ONOPHOI pAACTHb.

PnHmep MoHTaxa dIy MaunH c6oIbUnHMn OOnOpHBIMn PnaCTHaMn.

BbipOBHnNoIooKHeMaunHb,Chayana yCTaHOBte 06a 60KBx yNopa TaKIM 6pa3OM, YTObI OHI NO BcE NIOUaDN KOHTAHPoBAH C ONOPHO IpACTHNO MaunHb. DAnee yCTaHOBte 06 npXBata (PNC.18.5 c).Dba 60KBx yNopa DOXHHb 6bITb YCTAHOBHe KAK MOHXO DaNBue No HapabJIeHIO K BoJee nnHHBO CTOpOE ONOPHO nPACTHb (PNC.18.5 d).YCTAOHBe rYIOB DEPKATENb C 60KBbIM yNOPOM I DonONHtEnbHO 3aTEM aHaONHbIM oBzAOHBe TgIOB DePKATen b C 60KBbIM yNOPOM I DonONHtEnbHO 3aFM aHaONHbIM oBa3oM 8yCTAHOBte 8yIOB DEPKATen b C 60KBbIM yNOPOM h PnOTBONIOXHO CTOpOE N DOJONHtEnbHO 3aFHKpyte erO BnHTOM, WaiBo, PpeOxAHNTEBHO WaiBo n RAIKO (PNC.18.5 b).B 3akIouHe MoNTaKa yCTAHOBte npNXBAT (PNC.18.5 a).

3aKpoTe n 3a6nKpyte nlaCTnHy MaunHb B COOTBETCTBN C pnc.17.

BHMAHNE: PnoBepBe epe pa3, yctaHOBHeNo n nooTHO uPKyIrpHO nnbl npannenbHO npopeeN dnnnbl, n npn Heo6xOdmocn BbipOBHnTe pyHyIO uPKyIrpHyIO nnly 3aHO.

IopKIOueHne K 3eKTPoNTaHHIO: BCTaBtE WTeCenbHyIO BWIKy pyuHO uPcKpyrpoHn Pnbl B npeOxpaHTeNBb BkHouatEnb, a yINHtBbN KaBb, iNywn ot ppeOxpaHTeNBHoro BbIKIOUaTeNa, BCTaBtE B WTeCenbHyIO po3ETky (pnc. 19.1). YdNHHTeNBb H KabeNb He BXODHT B KOMIIeKT.

BHIMAHHE: Neped nepBOHauJIbHM BBODOM B 3KcNpyatauHIO HAKMITE aBOMATnueeCKN TENNOB BblkIouateNB！B cnyae OTKIOUeHIN HNTAHN NO npuHHe npeBbIeHHaONyCTmOro HAnpRKeHHaXMMte ATOmatnueeCKN TENNOB BblkIOuateNBnocne 5-10 MHT OxNDHaHIN. Pocne 3TOrO MOKHO HaxKaTb NpeKIOUaTeNB BKIOUOeHHA/BBkIKIOUOeHHA (Pnc. 19.2, 19.3).

HaKMMTE KpachyIO KNkNY (BblIKI). Ha npdeoxpaHNTbHOM BblKnHouateTe. 3aTe m npKpeHnTe 3aKm BknOueHnK pyHou nKpyNrpHn (pnc.19.4). HAMMTE 3eENy KOHNy (BkII) nnpoBePte, Cbo6dHO nn DnBnKeTc nIoTHo nInB npoepz nIINbI (pnc.19.6), nocne yero cnoBa hAKMITE KpachyIO KNkNY (BblIKI). (pnc.19.7).

BHIMAHHE:Kak npabnIO, pni HeCNIOb3OBAHH INN KcIaNbBAHH CToNA HeoXoNDMO N3BNEKaTb 7TEncBHyIO BnIKy.

MASTERcut1500rotobkpa6ote.

CTAUHOHAPHOE PACININIBAHNE C NOMOULIO PUYOH LHPKYNPHOI NIIbI

BHIMAHHE: Bcerda pabotate 3aunTHoH KpbuKoN Incnonb3yTe nIeNcOsc dny ydaenHn PbInB 3aunTHoH KpbuKe.

PacnHnBaHne cyrnoBbIM ynopom

Bvndte yrnoB ynp B harnpabnioy (pnc. 20.1). Cne nte 3a Tm, yto6bI chehky npoxoHk kMOHNO 6nHke K aunTHOINKpbuikhe, yto6bI oceNtB noBem Kpbuikn (pnc. 20.2). OTTnHte yrnoB ynp Haaad n nooHnE o6pa7bAeMyo Detalb prdcm cyrnoBIMynopom.Bkniouthe pynuO uKnyu nOmoU bKnHnHa npdoXPAHNTBnHOM BbIKNUOATene. Kaonok3aHO Ha pncyHke, nooHXNE Ody pykuHa yroBnOy np, a BTOpyo kyu Ha o6pa7bAeMyo Detaln HnBnaHTe ee B OTMeHHOM cTePknHn HapabnHn K noToHyu npKnyuHnPi (pnc. 20.3), noka o6pa7bTaBAeMaertel Taht He 6ydt nNoHctbpo paCnHe. B 3aBepseHne BblIOHTpe PCHyIOU npKnyarhyo nnyc nmoUho KNOHKn Ha npdoXPAHNTBnHM BbIKNUOATene.

BHHMAHIE:Bcerda cneIte 3a tem, yTObI oBe pyKN HaxOHNHCb HA DOCTaTOHOM paCtOHRN OT NOOTHa CHPKynpHON Pnbl (onachocTB paHeHH).

BHIMAHHE: MInha o6paabaembIX detaeOn UeHTpa (npope3n nn nIb) Do cKo6b3aunTHO KpbuHKn DOnJHc CoCTABNtB He 0one 330 MM.

RLKS)

C nomoubu yrnoBoro ynopa moKHO paacnHnBaTb 6paabTaBaemble Detan noy rno 0-65°.Ira 3TOrO ocna6Be BnHT c pykortko, yctahOBte tpe6yemblyrOIN CHOBA 3aTHNTE BnHT (pnc.20.4).DaaneocyuieCTBnpe paacnHnBaHne, kak nokasaHO ha pnc.20.1 -20.3.

PacnHbAHne c npalneBhbim ynopom

OcnaBn BnHT c pykoTko, BCTabte npaannehnyu np Hnapabnnoyio. IoDBHbTe npaannehnyu np K 3auTHNOKpbIke. PpOBepBe, TOb6bl anHomHHneBly npn H B KOEM Cnyae He BbCTynan DaIbwe, Yem NocEnHm BNIMMb 3y6 NOtHa NINb (PNC. 21.1). B 3om cnuyae OcnaBte kpeenekHb nBHT, CNFKA OTTNHHe ynp H3adN CHOBA 3aTHNHTE BnHT. Danaee yctahOBHTE tpebyemyu uipnHy p3pe3a 3atAHnTE BnHT c pyktoH BKnIOHTe pyHy UNPkynapHyIO NnC NOMOIBHO KNOPKHNHbOM BkIOUOTAE. Ka NOKa3aHO Ha pncHyke, DBIRATe o6pa6btaBaEMyO detaN B OTMeHHOM CTpenKo HnpanpAHHN K NOtHY NpKpynPHo NINb (PNC. 21.2), Noka Obpa6abTaBAeMaER Detanb He 6ydet nonHOCTbpo pacnInHe. B 3aBepseHHe bkiNIOHTe pyHy IO npKpynPHo NINc NOMOIBHO KNOPKHNHApEHO BHKIOHTAE. Pn6b60fke y3kXx Detanei obraTe hBO HCNOB3yTe 8TOK dnn nepeMeueHg Detalei, BXODsH B KOMIINEKT NOCTABKN (PNC. 21.3).

BHIMAHHE:ДиннаобраыбьмьдетаileOTцHTpa（npope3nДЯпь）do napannelbHoroynopaDOnJHa coctabTbHe6onee375MM, aotcehtpa（npope3nДЯпь）do ckoBblaunTHOHkpUKN-He6onee330MM(pnc.21.4).

BepTKaNbHbIe pa3pe3bl co cKOCOM

IJIeBepTKaJIbHO rOpaCINHBAHrNco CCKOCOM Heo6xOIMn HmMeHtB NOnOKeHHe pyHOr UInpKynrHPO nnbl. YcTaHOHTe Ha puHoi UInpKynrHPO nnnne Tpe6yEmbYrOg CKoA. OToDBHHte OTKnHDoe 3arPaxDeHHe pyHOr UInpKynrHPO nnbl Ha3ad N yCTAHOBITE MaunHy NO ueHTpy B npope3b dnnn. OcnabTe cTOnop rnybHb pa3pe3a pyuOH uPKylnrPoHn nnbl N yctAHOBTE nnhy Ha noNNHy rnybHy pa3pe3a. 3aTaNthe cTOnop rnybHb pa3pe3a. BApOBHnre pUHyU uPKylnrPHyU nnly TaMn o6pa3om, YTObI OHa byla yCTAHOBNeHa No ceHTpy nnapAnnelbHO npope3n dnnnPiB (Pnc.21,22.2).

BHIMAHHE: POBeBte pacCToAHne OT MAKCMaJIbHO BbIbHyTO RnpeD 3y6ca NOJIoTHa UINPKyIaRHO NINb DO npeDHeK KpOMKn npope3n DnA nn. 30 PaCToAHne DoJIKHO COCTABNtB MeHbue 20 MM (PNC, 22.3).

BbipOBHnNOJKeHnMaunHb, Chauana yCTaHOBe 06a 60Kobix yNopa TAKIM Oba3OM, YTO6bI OHN NO BCEI NIOUADNI KONTAHTPOBAHn C ONOPHOI
IIaactHHo MaunHb. DJIeepyCTaHOBe 06a npXbata (pnc. 22.4 a). 3aKePInTe Ody CTOpOHy ONOPHOI NlactHHb. IINr 3TOrO CHauana yCTaHOBe
YrnoBOI dEPAkATE b CByM6KOBoBMHN yOpAMn.CneDITE 3a TEM, YTO6bI yNopbI NO BCEI NIOUADNI KONTAHTPOBAHn C ONOPHOI NlactHHo. 3aTEM
AnanorHHmOBpa3OM yCTaHOBe rYOBOI DEPKATeB c BYMAIB 60KobIMn yOpAMn HA pOTINBOONIOHOH CTOpOE. YcTAHOBe 06a npXbata.
O6a npXbTaBdo nnKHe b6TbYCTAHOBNEH kao MOKHO daNBse No HANPABNAHIO K 6Oone DNNHO CTOpOE ONOPHOI NlactHHb (pnc. 22.4 b).
Yka3AHne: Pn IN cNoNtboBACHH 60BJHX ONOPBX nPLAACTBNTe KpeJIeNE H COBTBETCBNH C HNCTpyKUNRMn Ha ctp. 15 (pnc. 18.5).
Ee pa3 npOBepte, CBO6dHO nn DBNKETCR nonOTHO nbl B npopez (pnc. 22.5).

3aKpoTe H 3a6bokpyte nlaactHMy MaunHb B COOTBETCTBN C pnc.17.

BHHMAHNE: PpOBepbTe eue pa3, yCTaHOeNo IINONTOHO UPKyIrpHO Nnbl npapannelbHO npope3N Dn Nnbl, n npH Heo6xOIMOCtN BbipOBHnTe pyHyIO UPKyIrpHyIO Nnly 3aHO.

PACININIBAHNE C NOMOLJBIO PYHORO IOE3NKA

BbipOBHnIe nnoJKeHHe pyuHOro lo63nHa Ha nactHHe MaunHb TaKIM o6pa3OM, YTO6bI NOLOTHO NINb IPOXODHNO NO UHTpy OTBepCTHnIa HINb (pnc. 23.1). UcTahOBte pyuHoi no63nC nMOUbIy cHTbpex 60BbIX ynpOB u HETbPex npxBAOB, KnoKa3AHO ha pNCyHke (pnc. 23.2). 3akpoTe n a6IOkpyne nactHnMy MAuHb B COOTBcTBn C pnc. 17. BcTabBe 3aKm BkIOHcH eBuKIOHcAte pyuHoro no63nHa, a WtencBHyIO Bnky -B npEOXPaHrTeNbHry BblKnIOUaTeNb. Ppi pa6ote C pyuHbM no63nKcm BceDf nCONb3yHe T aSIHTHYKpNU (pnc. 23.3).

NCIOJIb3OBAHNE BKAUYECTBE PABOOYTO CTONA

CTON MASTER cut 1500 o6opuyoBaan 4 nactMaccOBm npxBaTAM. C IN NOMOuHO MOKHO ng6KO H63OnaCHO 3axnmatb n fHKpOBA Tb 6paabTaBaEMbIe DetanH (PNC.24).

PEYIINPOBKAIIACTINHbIMALINHBi

BbCota nactnHb MaunHb Ha paoboye nactnHe yctaHOBeHa 3aBoDe-pon3bOInTe TaKM o6pazOM, YTObI oecneHTb cKoJIbKeHHe
60paBaTbMaemoi Detanu No pnoauadn paOoei nactnHb Hn pAocTHNb MaunHb. Pn Hoo6xoJIMOCTH MOXHO OTpeyInpOBaB BblcOTy nactnHb MaunHb. IAnr aTOro Ocna6te WeCTb KOHTprAE. 3aTeM BbyPOBHNe pAACTnHy MaunHb BmCTe C paOoei nactnHO C NOMUsbIO WeCTn
peryIpOBouhIX BnHTOB H ChOBa 3aTHNTE KOHTprAKn. Pepe KaJoD paOToB BCERda npOBepRtE, 3aTHyTB N WeCTb KOHTpraek.
PpeL KaKaDo pa6oToB BcERda npOBepRtE, YTObI BnHTb H KOHTprAKn Ha 060nx DepkATEENx 6bln 3aTHyTB Do BXOXKeHN B Na3bl
PiactnHb MaunHb (pnc.25).

CNEUHbIE PnHAJENHOCTN JMAstercut 1500 IBA DOnOJIHNTEbHO YCTAHABJIIBAEMbIX KJIINHA NIIbl, APT. N2 6930000 H 6904000, IINcONb3OBAHRApyHOn CUPKUYJAPHOH NIIbl BE3 KINIHA

BHIMAHHE: Yka3aHbIe 3decb cneuaHbIe npHaJNeKHOCTMOKHO IcNoJIb3ObAIB HckIOHTeBHO CO CTOLOM MASTER cut 1500.

YKA3AHNE: Pa6oTa n o6cIyJHbAHne 3THX cIeuaJIbHbIX pIHHaIeKHOCTe 6yET OINcaHa dAnee n IOKa3aHa Ha pncyHKax, HauHHa co cTp. 24.

UEJIIEBOE NPNMEHEHNE

O6a KInHa NnIb No3B0JrHcNo1b3oBaTb pyHyIO uKpyHpyNny 6e3 KInHa.
KInH 6903000 npedHa3aueH nIra Icno1b3oBAHn pyhBx uKpyHbIX nC MaKcHmAlbHbIM dAmETpOM 160 MM H npHHO pa3pe3a
OT MHNYM2,4 MM Do MaKcHym2,8 MM.
KInH 6904000 npedHa3aueH nIra Icno1b3oBAHn pyhBx uKpyHpbIX nC MaKcHmAlbHbIM dAmETpOM 200 MM, npHHO pa3pe3a
OT MHNYM2,4 MM Do MaKcHym2,8 MM nMaKcHmAlbHO rIy6HHO pa3pe3a 66 MM.

BHIMAHHE: PnHcnoh3oBAHH CneuHaJIbIbX npHaHaJEnKHOe O6aTeJIbHO COJIOJaTe O6UHe IHCTpyKUn No TExNHKe 6eOsnacOCTN, HCTpyKUn no 6eO3oNaCHOCTN, KacaOuIeCe rpyHbIX cIpyKJIrpHbIX nII, n Yka3aHnB OPINHAJIbHO INCTpyKUn no 3KcnIyatauHH pyHOr cIpyKJIrpHOr nII bE3 KInHa.

RUS

KJIINHbA,APT.NG6903000N6904000

KInH, apt. No 6903000, BKNIOUaET cIeDyIOUe KOMNOHEHTb: 1 KINH (dIra nOIOTHa UPKyIaRHOHN NINb DNAMETPOM MAKC. 160 MM), 1 KpENJIeHHe KINHa (DNHHAR KOHCTpyKUNH), 1 yctAHOBoHbIKANbOp (pnc. A). KINH, apt. No 6904000, BKNIOUaET cIeDyIOUe KOMNOHEHTb: 1 KINH (dIra nOIOTHa UPKyIaRHOHN NINb DNAMETPOM MAKC. 200 MM), 1 KpENJIeHHe KINHa (KOPOTKA KOHCTpyKUNH), 1 yctAHOBoHbIKANbOp (pnc. B).

BHMAHNE: Danee oncaha yctahOBka n EKcnpnyataa KlnHa apT. NO 6903000 dnn pyhbx npkynpHbix nC dHaMeTpmo noToHa MaKc.160 MM.

YCTAHOBKa H3KcNpyaTaN KInHa apr. N2 6904000 Dn pyuHbix uNpKpyIepHbIX nC dHaMetPOM NOOTHa MaKc. 200 MM OcyUeCTBnRETC TAKM JKe o6pa3OM. Odnako Pnir NCnONb3ObaHN 3TOrO KInHa BO3MOKH a6pa6Oka DetanE BICOTOn Do 60 MM.

MOHTAK KIINHA

BckpoTne pactHy MaunHb B COOTBCTBn C pnc. 16 (pnc. C.1). YcTAHOtte KpeNkHb CTepKHe b KpeNkHbMM DetAaHm. He 3aTRBaIe CoedHHhe (pnc. C.2). 3aKoPte NactHy MaunHb (pnc. C.3). BCTabBe KnnPi PnmeHo Ha 2 cm CbePy B na KpeNkHO rOtePKNH. CneDInTe 3a TEM, T06bl KINH, KAKOK3AHO CTpeKHe HpCynHe, 6bl NOBEPHy Do ynpa B nactHy MaunHb (T. e. YTO6bl OH 6bl YCTAHOBEN BEPTKANbHO). 3aTHHTe BHIT C BYHTpeHHNKUM (pnc. C.4, C.5). CHOBA BCKpoTte NactHy MaunHb B COOTBCTBn (pnc. C.6).

MOHTAK PUYHOI LIPKUJIAPHOI NJIbI

OToDnHbTe OTKnHoe 3aRpaKdHepe pyHou cIpyKyIpyHO nnbl Ha3ad n yctAHOBte MaunHy no eHTpy B npope3b dnnnbl. Ocnab6te cTOnop rnybHb pa3pe3a pyHou cIpyKyIpyHO nnbl yctAHOBte nny Ha nonHy0 rny6Hy pa3pe3a. 3aTnHte cTOnop rny6Hb pa3pe3a.

BHIMAHHE: PpOBepbTe pacCToHHe OT MAKcHmAbHo BbDHyTO BnpeI 3y6ua nIOToHa cNPKyIrpHO NIIb IIO npeIeHKe KpOMKn npope3n DnI pINb. 3To pacCToHHe DOJIKHO COCTaJIbT MeHbue 20 MM.

BbipOBHnTe nepeHIO CTOpOHy pyHOr uKpyHnHO nnbl. yCTaHOBnB ee BPOeHb c OTMeKo "0" Ha onOpHn PnactHe Nnbl n BPOeHb C 6obHM BCNOmOrateBnHbIMn HnHnMn MaKnopBOHN HA nactHe MaunHb. Ha 3aDnei CTOpOHe pyHou uKpyHnPHo Nnbl yCTaHOBnTE nIoTHo NNl bTAKM Opa3OM, YTObI OHO HaxOIOncb NO eHTpy KnHa (pnc. D.1). Yka3aHHe: nyUe BCero npOBepr bnpABNtBOCTb BbpaHBnBAHn, CMOTPr C3aDn KInBa H napBaENHeNo IONTHa, NcOKbky MaTePnA lnoTHa TOnu, Yem MaTePnA KInHa. BbipOBHn NOxKeHne pyHou uKpyHnHO nnbl CHaHAp aYCTaHOBITE o6aOkbBix ynpora Takm Opa3OM, YTObI OH No BceN PNOuaDN KOHTaKtnPOBaN C ONOpHn PnactHO MauHHb. Daane yCTaHOBITE o6a npXbata (pnc. D.2).

BHNMAHNE: PpOBepTe epe pa3, yCTaHOBHeNo nI nonoTHO uPKyIapHO nnblI no ceHTpy KInHa, B npOTNBOM cnyae BbPOBnTe pyHyIO cnPKyIapHyIO nIIy 3aHOBO.

3aKpENIe BTOpyIO CTOpOHi OnOpHOn PnactINb. DnA 3TOrO CHaAana yCTaHOBte yrrnoB depHaTeN C DByMa60KBbMn Ynpamn. CneIe 3a TEM, TTOb6 ynpb no BcH nIOuAdn KOHTAKnOBaHN C onOpHOn PnactINH. 3aTe m anAoRnHbIM o6paOM yCTaHOBte yrrnoB depHaTeN C DByMa 6OKOBbIMn ynpamn Ha npTnBOONIOJHO CTOpOHe. UCTaHOBte O6a npxBATA (PNC. D.3). O6a npxBATA DOJIHHb 6bTIy cTahOBNEHk Ka KMOHNO DaJIbe No HapBaBNeHIO K 6Oone DnIHHO CTOpOHe ONOpHOn PnactINb. YkaaHHe: dpyrHe bapNaHTbl KpePnEHHra I DpyrIX ONPbIX pnaCTIN CM. HA cTp.13-15.

PerynpoBka 6e3onachoro paCToHm MEKdy KInHom nNONTHOM nNbI c NMOU bO yCTaHOBOuHOro KaHbpa.

3aKpOHTe pIactHMy MaunHb (pnc. E.1).OcyueCTBnTE MOtAH qactHe HA KInHe, yka3aHHbx Ha pCynHe (pnc. E.2). BnHT n raHy c hakatko, coedHHeHbte C KInHom, 3aTHHTe HApEko, a BnHT n RaHy C hakatko, HaxoHmecc CnepeDn Kopnyca, CoedHnTe, He 3aTARHBa (pnc. E.3). C nOMouhIO WeCTHRpaHBO RIO OCA Ocna6Be TKePENHE MKNHa (pnc. E.4). B BepTNkAcbHOM NOnoEHN HpeMeCTN KeHN BnH 3 K NOIOTy NINbI (pnc. E.5). DnRnAte KINH BnH Do Tox Nop, No KaHne Mepe, OOH 3y6 NOnoTH A NINb HE npETcB KOpNy cYtaHOBOHOrO KANbpa (pnc. E.6). 3aTHHTe nepeHNO raiky C hakATKO (pnc. E.6). Pocne 3aTARBAHnBnTA C BHYtpEnHM WcETHRPAHnHOM Mekdy KINHO M NOONTHOM NINbl yctAHAbJIbBAeTc 6e0NaCHOe pacToHHe MaKc. 5 MM (pnc. E.7). B 3aKnIOueHHe OTBnHTte YcTaHOBOHb KAnbOp OT KInHa (pnc. E.8).

BHNAMHNE: PnOBePbTe eue pa3, yCtAHOBHeo Hn noNoTHo uPKynpHHO nnbl No ceHTpy KInHa (Pnc. E.8) n co6nIOeHO nI 630NaChoe paccToHHne MaKc.5 MM MExdy KNHOM HnoTHom Nnbl (Pnc. E.6). B npOnBHOM cnUyae BipyOBHnE pyHyO uPKynpHyo nIy 3aHOBO.

BHNMAHNE: Npeed kaido pa60to Bcerda npoeepnre, npouho n3atrybkiin H KpeneKhie deTani.

3aBnKpyIe nactIny MaINHb B COOTBcTBn C pnc.17.CToI rOIB K cTauHOHApMOy paCnnNBAHNO. NO 3OMy NOBOD CM. nyHKT «CTAUHOHApOE paCNIINBaHne C nMOUbIO pyHoi UpkyIpaHIO nnbl

H3meHeHHe rny6nHbI pa3pe3a

PnH3MHeHNrny6nblpa3pe3a pyHNOU pKynpHNO HbIeHO6xOIMo HMeHbT bIcOTy cTAHOBKN KINHa, YTO6bl o6ceNHTb 6e30NaCHO paCtOHHE MAc.5 MM MEHJy KNHOM I NONOTHM Nbl.Chauana Ocna6Be TKN C NOMOIO BIECTNRPAHHORO KIOUYa.YCTAHOBITE HA Tpe6yeMyo rny6nHpa3pe3a pyHNOU pKynpHNO Hbl.3aTHNE CTONOP rny6nbl pa3pe3a.PnPKPENTE yCTAHOBQHKnAIN6p nYCTAHOBITE NOLOKHe NkHA B COOTBTCTBN C PNC.E1-E.8.

BepTKaJIbHbIe pa3pe3bl co CKOCOM

IJIeBepTKaJIbHO paCNIHbAHnco CKoCOM Heo6xOdHmIO H3MeHHTb NOnOKeHHe pyHOr UHPKylpHOr NINb. YcTaHOBtE Ha puHoi UHPKylpHOr NInne Tpe6yEmbl yron cKocA. OTOBHNbTe OTHDNHE 3arpaXHeHne pyHOr UHPKylpHOr NINb Haaad N yctAHOBtE MaunHy NO ueHTpy B npope3b dNINb. OcA6bte CtonOp rLy6bHb paPae3a pyHOr UHPKylpHOr NINb Nyt A yCTAHOBtE NINy HA noHYo rLy6bHy pAspe3a. 3aTHHtE CTonOp rLy6bHb paPae3a (pnc.F.1.F.2). OcA6bTe BNT C BHYTpEHMM UCTeRpaHHKOM NOBopaHbAte KINH, NOKA OH HE yCTAHOBtCR YeTko NO ueHTpy oTOHOweHIO K NOOTHy UHPKylpHOr NINb (pnc.F.3).

BHIMAHHE: PpOBepbTe pacCToHHe OT MAKcHmAbHo BbDHyTO BnpeE 3y6ua nIoTHa UnpKynrpoHoi Nnbl do nepeHne KpOMKn npope3n DnI nnbl. 3To pacCToHHe DOJKNHO COCTABNtB MeHbe 20 MM (PNC.F.4).

3aTAHHTe BnHT C BbTypeHHM WecTHrpaHHKOM (pHc.F.5).

BHHMAHHE: BbpoBHnTe noItoHO nIbI npaJIeINbHO K npope3n Ira nIbI, OJHOpeMeHHO cIeJa 3a TeM, YTObI NOItoHO nIIbI bIO yCTaHOBNEHO no CEHTpy no OTHOWeHIO K KInHy.

RUS

Danaee yctahOBHTe 06a 6okobx ynpa Takm Opa3om, TTObO OH NO BcE NIOUADIN KOHTAKTHPOBAMC ONOPHO NnactHHoMaHHB. 3aTeM YCTAHOBHTe 06a npxBA tA.3kpenite Btpyo CTOPHO ONOPHO NnactHHI. DInr 3TOrO CHAYANA YCTAHOBHTe yTNOB DEpKATENB C DByMR 6OKOBIMN ynpaMn. CneNTe 3em, TOTbO Ynpb IO BcE NIOUADIN KOHTAKTHPOBAMC ONOPHO NnactHHo. 3aTe mAnOHNUHM o6p3OM yCTAHOBHTe yTNOB DEpKATB C DByMn 6OKOBIMM NpOPAH M Na pOtnHBONONKHO CTOPHO. YCTAHOBHTe 06a npxBA tA. Oba npxBA tAOHNBt 6bItb YCTAHOBHE KAK MOHDA nBaWE No HapPABNEHIO K 6OJIe DnHHO CTOPHO ONOPHO NnactHHI (PNC.G).

Perynpobka 6e30anachoro pacctoHn Mekdy KINHom N NOJOTHOM NIIb C NOMOsb yctaHOBOHOro KaH6pa.

3akpoite nactny Maunh (pnc. H.1).OcyueCTBte MOtack qactey Ha KInHe, yka3aHbix Ha pncyHke (pnc. H.2). BnHT nraky c hakaTko, coedHHbte c KINHom, 3aTHne HAKpeHIO, a BnHT n raKy c HAKATKO, HAXODHNEc CpepeNkOPnyca, coedHHte, he 3atrrBaar (pnc. H.3). C nOMouIe WcTHRpaHORo KInOuCA ocAble kpenennee KInHa (pnc. H.4). POnDBHBe KInK NnONOTHy Nnbl NOd TEM KeYrOIM YctAHOBHeNo NnOTo Hnbl (pnc. H.5). NoDBHraTe KInH BnH3 DoTex np, no KaPaeH Mepe, OHN 3y6 NOtOHa Nnbl He ynpetc B Kopync YcTahOBouHO rKnAbpa (pnc. H.6). 3aTHne nepedno RauK c HAKATKO (pnc. H.6). Nocne 3aTHRBANH BAHTMa C BYTPERHM WeecTIRPAHNOK MEXdy KInHom n nonoTHom Nnbl yctAHABNaEaTCB 6eONachoe pacCTORHMe MAKc. 5 MM (pnc. H.7). B zAKIOueHHe OTBmHTte yctAHBOUHbK KnHp ot KInHa. 3a6NoKpyte nactiny Maunhbl B COOTBETCBH C pnc. 17 n eue pa s npobepbte, Cbo6OHO nn DBXkETCR NOIOTHO Nnbl (pnc. I).

BHIMAHHE: PpOepeBte eue pa3, yctaHOHeNo nI IIOHTo cypKyIpaHcNIIbI no ceHTpy KInHa (Pnc. I) n Co6nIOeHO nI 6eONaCHOe pacCTOHm MAKc.5 MM MeKdy KINHom NIOTHOM NIIbI (Pnc. H.6), B pOtnHBom Cnyae BbPOBHRte pyHyIO npKpyIpaHyIO NIIy 3aHOBO.

BHIMAHHE: Npeid kao do paobto Bcerda npoepaite, npouho Jn 3atrytkiin KpeneKhble deTani.

CtoI rOToB K ctaaHApHOMy paCnINBaHHIO, no 3tOMy NOBOy cm. nyHKT «CtaaHapHoe paCnINBaHHe C nMOUbO pyuHOI uRkYJAPHOH NIIbI>.

TapaNTNA

YbaxaembnoKynpTaTeB!

Bb npoepen BbCOKaeeBHeHoe 3denee HpMbI wolfcraf, pa60ta C KOtobm DoCTABNT Bam yOBObnCTBe. PpOyKuHwolfcraf COOTBETCYBT BcokmmTexHueckm CTaHapTAM npepe NoctynnHem BpoJxpyoN pOxoAHT dntelbHy nptbpaOboTN TcTeHPOBAHH. PerynpoHae TceTPOBaHn KHOPTBoB BO BPEM cepHHIO pONsBOCTBa OObeCNBAHOT BcKOKe kaueCTBO pOdykUHN.

Cpok rapaHTnHa npno6peHbB BamnpoayKT wolfcraft coctabnet 10et Co hN noKynKn npu ycNoBN erO kCNpyataun HcknoHTeBHO B sbTobx cIenX. RapaHTnPaPncOcTpaHaeTc TOnbKO HA HeNOCTATKN CamrO npEMeta nOKyKN, Bbl3aBHHe DeEeKtAMM MaTePNA Jn PONsBOCTBA. RapaHTn He DeETbYet B OTHoHEnn DeEeKToB NOEOCTaKOB, Bo3NHkUnx BCNECTBne HnepaBnHOB 3cKNyATAun Hn Hn EHeJEAuero TexHueCKOro 06cnyBaHn npOyKta. Kpome 3TOrO, rapaHTn He paocPoTpaHReTc Ha 06bUHy N3Hoc, a TAKKe Ha deEeKtBu Hn HeOCTaKN, H3BeCHbte NOKyNaTeHIO npn 3akHouEHnn DOROBOPa Kynn-npoDAKK.

TapaHTHnHbIe Tpe6oBaHHa MOryT npedBnTbCnKKnOHTenbHO npn HauHHn Ceta/KaccOBoro YeKa.

TapaTHNA, npedocabmaer wolfcraft, he orpaHnHbAeBaaN 3aONHbIe npaba Notpe6nten (npabo Tpe6oBaTB bInOnHeHn dorOBopa, npabo Ha OHOCTOpOHm OTkA3 OT BInONHeHH DOROBOPa, npabo Tpe6oBaTB CHIKENH NOKYINHO CEHb BCNECTBne 0bHApXeHHbIX HeOcTaKOB, npabo Tpe6oBaT BO3MeEHHa Yuepe6a Hn 3atpa).

3aBHeHne O COOTBeTCTBn TObapa nO EG - dIpeKTHBe O MaunHax 2006/42/Ebponeckoro coo6uectBa, npIOKeHne II A.

Hactoimn Pnpma wolfcraft GmbH B D-56746 Kemenich, Wolff Str. 1, TepmaHHa, aarBnet, 0to npdyKT (MASTER cut 1500) otheaet dKHTBE 2006/42/Eponeckoro coo6ceCTBA.TUEV Rheinland LGA Products GmH, Tilystrasse 2, 90431 Nurnberg. BM: 600875670001 COOTETCTBYET CND EN 60745-1, DIN EN 60745-2-5, DIN EN 60745-2-11

YNONHOMOUEHHOE NIOIINNOINICAHN DOKYMHTOB COOTBETCTBn I COCTABNEHNA TEXHueeCKO DOKYMENTaUN. (pyKOBOCTBO FHPMOI/TEXHKA/IONCTHKA/wolfcraft GmbH)

D

wolfcraft GmbH

Wolff-Straße 1

56746 Kempenich

GERMANY

D

Service Hotline:

0049(0)265551280

Fax:[phone]

technical. [e-mail]

N

[e-mail]

ATRBHR

wolfcraft GmbH

Hauffgasse 3-5

1110 Wien

Tel. [phone]

Fax [phone]

[e-mail]

R ⑤

wolfcraft s.a.r.l.

1 rue d'Aurion

F-93 113 Rosny sous Bois Cedex

Telephone [phone]

Tel. [phone]

Fax [phone]

e-mail: [e-mail]

(correspondence in English)

E

wolfcraft^® Espana S.L.

Unipersonal

Technical and Commercial Company

12, Papastratou & Asklipiou, Str.

18545 Piraeus

Telefon: [phone]

Telefax: 0030-2104137692

[e-mail]

H

Manal d.o.o.

Velimira Skorpika 1 a

10090 Zagreb

Telefon: [phone]

Telefax: 00385-1-3466412

[e-mail]

RO MD

Steinel Distribution s.r.l.

Parc Industrial Metrom Str. Carpatilor nr. 60

RO-500269 Brasov

Telefon: [phone]

Telefax: [phone]

[e-mail]

AL

SLAV GmbH

Tzar Osvoboditel 331

9000 Varna

Telefon: [phone]

Telefax: 00359-52-739073

[e-mail]

18 1

Mi-lumen d.o.o.

Dositejeva 176

36000Kraljevo

Telefon: [phone]

Telefax: 00381-36-312867

[e-mail]

EIG Sh.p.k.

Frigoriferi Metalik

Rr. Siri Kora

4000 Tirana

Telefon: [phone]

Telefax: 003554259501

[e-mail]

E:

Centroinstrument

12351 Moskau

Molodogwardskaja UI.61

Tel.: [phone]

Fax: [phone]

Centroinstrument-Ural