CDP 4212 CD - Cd player/recorder AEG - Free user manual and instructions

USER MANUAL CDP 4212 CD AEG

• To avoid the risk of re or an electric shock, you should not expose the device to rain or moisture. Consequently, do not use the device in the immediate vicinity of water - for example near a bath tub, a swimming pool or in a damp cellar.

• Use the device only for the intended purpose.

• Only connect the device at a properly installed plug socket. Pay attention that the speci ed voltage corresponds to the voltage of the plug socket.

• When using external mains supply, pay attention to the correct polarity and voltage. Always place the batteries in the correct direction.

• Assemble the device in such a way that the available ventilation openings are not covered.

• Never open the housing of the device. Incorrect repairs can constitute a considerable risk for the user. Do not use the device any more if it is damaged, but have it repaired by a specialist.

• If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompany- ing documentation. Devices bearing this symbol work with a „class 1 laser“ for tracing the CD. The built-in safety switches should prevent the user being expo- sed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened. Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light. Children and Frail Individuals

• In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach. WARNING! Caution! Do not allow small children to play with the foil as there is a danger of su ocation!

• In order to protect children or frail individuals from the hazards of electrical equipment, please ensure that this device is only used under supervision. This device is not a toy. Do not allow small children to play with it. Symbols in these Instructions for Use Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

This warns you of dangers to your health and indicates possible injury risks. CAUTION: This refers to possible hazards to the machine or other objects. 쫵 NOTE: This highlights tips and information. Special safety information This device works with a class 1 laser.

• Playing back audio/MP3 CDs. It is intended exclusively for this purpose and may only be used as such. It may only be used in the manner described in these instructions for use. The device must not be used for commercial purposes. Any other use of this device is considered to be contrary to the intended use and may result in damage to materi- als or even personal injury. The rm ETV – Elektro-Technische Vertriebsgesellschaft mbH does not accept any liability for damage caused as a result of the use of this device contrary to its intended use. Commissioning the device CD deck transport protection

• Shift the OPEN key (9) to the right to open the CD compartment (8).

• Remove the transport protection from the CD player if present before use. Inserting the battery/batteries (battery/batteries not supplied)

• Open the battery compartment (17) on the inside of the machine.

• Insert 2 1.5V R6, AA type batteries. Match the polarities correctly (see the inside of the battery compartment).

• Close the battery compartment.

• A battery symbol in the display indicates that the batteries need to be replaced.

• If the device is not used for a prolonged period, please remove the batteries in order to avoid the leakage of battery acid. CAUTION:

• Di erent battery types or new and used batteries must not be used together.

• Batteries are not to be disposed of together with domestic wastes. Dispose of the used batteries at the relevant collection bin or at your dealer’s.

Do not expose the batteries to high temperatures or direct sunlight. Never throw batteries into the re. There is a danger of explosion! Mains Operation (power pack not supplied) It is possible to operate the device using the mains power unit.

1. Insert the plug of the power unit into a correctly

installed 230V, 50 Hz wall socket.

2. Connect the CD player to the power unit by inserting

the plug of the power unit into the DC 4.5 V socket (12).

3. When using a power unit (DC 4.5V/600mA) ensure

the correct polarity according to the inscriptions on the CD player. General Operation HOLD (16) This blocks the functions of all keys on the device and is intended to protect against a key being activated accidentally. When the switch is pushed to the right the word ”HOLD” appears in the display. OPEN (9) For opening the CD compartment. 4,5 V socket (12) For connecting to a mains adapter. LINE-OUT (5) For connection to a stereo system, for example. BBS (4) This is used to amplify the bass sounds. With the func- tion switched on BBS appears in the display. VOLUME (7) This is used to control the volume. PHONES (6) For connecting to the headphones or earphones. Switching o You can turn the device o by pressing the 왎 STOP button (3) once, or twice if the device is running. 쫵 NOTE: If the device is not operated in stop mode, it switches o automatically after approximately 30 seconds. Playing CDs

1. Shift the OPEN key (9) to the right to open the CD

2. Insert a CD with the label facing upwards and press

carefully over the button until it snaps into place. Close the CD compartment.

3. Press the 왘II PLAY/PAUSE button (2) to switch the

device on and play back the CD. The letters „Cd“, „ESP“ appear in the display and „MP3“ ashes. Then the number of tracks appears brie y together with the total running time. The CD starts from the rst track. The track currently being played and the time that has elapsed are shown in the display. 34English 05-CDP 4212.indd 305-CDP 4212.indd 35 03.04.2008 14:03:52 Uhr03.04.2008 14:03:52 Uhr

4. To remove a CD, press the 왎 STOP key (3), open the

CD deck with the OPEN key and take out the CD carefully. Always keep the CD deck cover closed. 쫵 NOTE: When a disc is inserted incorrectly, ”Er” appears in the display. If no disc is inserted, the words ”NO dISC” appear. Playing back Music in MP3 Format With this device it is possible to play back pieces of mu- sic in MP3 format. The device also supports all standard CD types: CD, CD-RW, CD-R. The active ESP function always appears in the display (memory seconds); see item ”ESP”.

1. Insert an MP3 CD into the CD compartment as

described above. Close the CD compartment.

2. Press the 왘II PLAY/PAUSE button (2) to switch the

device on and play back the CD

„MP3“ ashes. Then the number of folders appears in the display, together with the tracks and total running time. The MP3 CD is played back, starting with the rst track. The current folder, the current song and the elapsed playing time are shown in the display. Description of the CD buttons 왘II PLAY/PAUSE (2) You can brie y interrupt and resume playback using this button. The playing time that has elapsed ashes in the display. Pressing again continues playback. I왗왗 SKIP- (14) With the CD running: Press once = This starts the current track again from the beginning. Press a second time = This jumps back to the previous track. Press a third time = This plays the song before etc. If the button is kept pressed down, the machine starts to search through the tracks. 왘왘I SKIP+ (13) With the CD running: With this button you can jump to the following track or the next track but one etc. If the button is kept pressed down, the machine starts to search through the tracks. 왎 STOP (3) The CD is stopped. By pressing once again, the unit is switched o . ESP/DIR (15) ESP in CD mode: It lls the 0-second electronic memory to protect against the jumping of the CD. If the player is jolted, the CD music data is read out continuously from an interme- diate memory. Reading errors are corrected subsequently in the intermediate memory. Every time the device is switched on an indication appears in the display that the anti-shock function is activated. Press the ESP button if you want to deactivate this function. DIR function only in MP3 mode: When an MP3 CD is inserted, this key is used to select the various directories stored on the CD. MODE (11) The following functions can be selected with the MODE key: Press once = „ “: the current track is repea- ted continuously. Press a second time = „ ALL“: the whole CD is play- ed continuously. Press a third time = „INTRO“: the word „INTRO“ appears in the display (during playback). Then press the 왘II PLAY/PAUSE button (2). All tracks are played for ten seconds. Press a fourth time = the word „RND“ appears in the display (during playback). If the 왘II PLAY/PAUSE button is pressed, all tracks are played back in random order. Press a fth time = all the functions are reset. The normal play mode is resumed. Functions in Playback Mode of an MP3 CD: Press once = „ “: the current track is repea- ted continuously. Press a second time = „ ALBUM“: the currently selected directory (the album) is repeated continuously. Press a third time = „ ALL ALBUM“: the whole CD is played continuously. Press a fourth time = „INTRO“: the word „INTRO“ appears in the display (during playback). Then press the 왘II PLAY/PAUSE button (2). All tracks are played for ten seconds. Press a fth time = the word „RND“ appears in the display (during playback). If the 왘II PLAY/PAUSE button is pressed, all tracks are played back in random order.

3. PROG and „Cd 00“ (track number) ashes on the

display. Next to it you can see the memory preset number P-01.

4. In MP3 mode the number of the folder is shown at

the top and the track number below it. Next to it you can see the memory preset number P-01.

5. Use the 왘왘I SKIP+/I왗왗 SKIP- buttons (13/14) to

select the desired track and then press the PROG button again. 쫵 NOTE: Press the ESP/DIR button to select the desired folder in MP3 mode.

6. The display changes to memory slot 02.

7. Select the next track with the 왘왘I SKIP+/I왗왗 SKIP-

and press the PROG key again. Repeat the procedure until all the desired tracks are selected. Press the 왘II PLAY/PAUSE key (2). The playback starts. Press this button to pause brie y the playback.

8. Press once the 쐽 STOP key to stop the playback while

retaining the program.

9. To resume the playback of the program press rst the

PROG key once and then the 왘II PLAY/PAUSE key.

10. To delete the program, press the 쐽 STOP key twice

(The machine switches o ). The device stops automatically once the entire sequence of programmed tracks is completed. The programmed sequence remains in the memory until the CD is taken out of the CD deck or until the device is switched o . It is possible to combine the pre-programmed tracks with the MODE function. After you have programmed the tracks and started the machine, please press the MODE button up to fourth times so that the functions „