CREATISTA PRO - Coffee machine NESPRESSO - Free user manual and instructions

USER MANUAL CREATISTA PRO NESPRESSO

CAUTION ELECTRICAL DANGER CAUTION: the safety precautions are part of the appliance. Read them carefully before using your new appliance for the first time. Keep them in a place where you can find and refer to them later on. CAUTION: when you see this sign, please refer to the safety precautions to avoid possible harm and damage. INFORMATION: when you see this sign, please take note of the advice for the correct and safe usage of your appliance.

• • The appliance is intended to prepare beverages according

to these instructions. Do not use the appliance for anything other than its intended use.

• • This appliance has been designed for indoor and non-extreme temperature conditions use only.
• • Protect the appliance from direct sunlight effect, prolonged water splash and humidity.
• • This is a household appliance only. It is not intended to be used in: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and they are supervised by an adult.

• • Keep the appliance and its cord out of reach of children under 8 years of age.
• • This appliance may be used by persons with reduced physical, sensory or mental capabilities, or whose experience or knowledge is not sufficient, provided

they are supervised or have received instruction to use the appliance safely and understand the dangers.

• • Children shall not use the device as a toy.
• • The manufacturer accepts no responsibility and the warranty will not apply for any commercial use, inappropriate handling or use of the appliance, any damage resulting from use for other purposes, faulty operation, non-professionals repair or failure to comply with the instructions. Safety Precautions Avoid risk of fatal electric shock and fire. In case of an emergency: immediately remove the plug from the power socket.
• • Only plug the appliance into suitable, easily accessible, earthed mains connections. Make sure that the voltage of the power source is the same as that specified on the rating plate. The use of an incorrect connection voids the warranty.

The appliance must only be connected after installation. Do not pull the cord over sharp edges, clamp it or allow it to hang down.

• • Keep the cord away from heat and damp.
• • If the supply cord is damaged, it must

be replaced by the manufacturer, its service agent or similarly qualified persons, in order to avoid all risks.

• • If the cord or the plug are damaged, do not operate the appliance; return the appliance to the Nespresso Club or to a Nespresso authorised representative.
• • If an extension cord is required, use only an earthed cord with a conductor ­cross-section of at least 1.5 mm2 or matching input power.
• • To avoid hazardous damage, never place the appliance on or beside hot surfaces such as radiators, stoves, ovens, gas burners, open flame, or similar.
• • Always place it on a horizontal, stable and even

• • Do not open the appliance. surface. The surface must be resistant to heat and Hazardous voltage inside!
• • Do not put anything into any fluids, like water, coffee, descaler or similar liquids. openings. Doing so may
• • Disconnect the appliance cause fire or electrical shock! from the mains when not in use for a long period. Avoid possible harm Disconnect by pulling out the when operating the plug and not by pulling the appliance.
• • Never leave the appliance cord itself or the cord may become damaged. unattended during operation.
• • Before cleaning and
• • Do not use the appliance servicing, remove the plug if it is damaged or not from the mains socket and operating perfectly. let the appliance cool down. Immediately remove the
• • Never touch the cord with plug from the power socket. wet hands. Contact the Nespresso
• • Never immerse the appliance Club or Nespresso or part of it in water or other authorised representative liquid. for examination, repair or
• • Never put the appliance or adjustment.
• • A damaged appliance can part of it in a dishwasher.
• • Electricity and water together cause electrical shocks, is dangerous and can lead to burns and fire.
• • Always completely close fatal electrical shocks.

Safety Precautions the slider and never open it during operation. Scalding may occur.

• • Do not put fingers under coffee outlet, risk of scalding.
• • Do not put fingers into capsule compartment or the capsule shaft. Danger of injury!
• • Water could flow around a capsule when not perforated by the blades and damage the appliance.
• • Never use a damaged or deformed capsule. If a capsule is blocked in the capsule compartment, turn the machine off and unplug it before any operation. Call the Nespresso Club or Nespresso authorised representative.
• • Fill the water tank only with fresh and potable water.
• • Empty water tank if the appliance will not be used for

an extended time (holidays, your Nespresso authorised etc.). representative.

• • Replace water in water tank
• • All Nespresso appliances when the appliance is not pass stringent controls. operated for a weekend or a Reliability tests under similar period of time. practical conditions are
• • Do not use the appliance performed randomly on without the drip tray and drip selected units. This can show grid to avoid spilling any liquid traces of any previous use.
• • Nespresso reserves the on surrounding surfaces.
• • Do not use any strong right to change instructions cleaning agent or solvent without prior notice.

cleaner. Use a damp cloth This machine contains and mild cleaning agent magnets. to clean the surface of the appliance. Descaling

• • To clean machine, use only
• • Nespresso descaling agent, clean cleaning tools. when used correctly, helps
• • When unpacking the ensure the proper functioning machine, remove the plastic of your machine over its film and dispose. lifetime and that your coffee
• • This appliance is designed for experience is as perfect as Nespresso coffee capsules the first day. available exclusively through the Nespresso Club or SAVE THESE INSTRUCTIONS Pass them on to any subsequent user. This instruction manual is also available as a PDF at nespresso.com Consignes de sécurité AVERTISSEMENT DANGER ÉLECTRIQUE

1. Coffee Volume: from 25 to 60 ml / 0.85-2 oz.

2. Milk Temperature: from 56 to 76 °C / 133 to 169 °F.

3. Milk Froth: from 2 to 30 mm / 0.08 to 1.2 in.

Tous les cafés au lait peuvent être programmés.

4. Select to confirm

To reset factory settings:

4. Select to confirm

6. Machine will power off

7. On next use, you will need to refer

to first use instructions Pour réinitialiser les paramètres d'usine :

Troubleshooting Buttons not illuminated. - Machine turns OFF automatically. See paragraph on «Energy Saving Concept». - Press START/CANCEL or SELECT to turn to «ON-mode». - Press START/CANCEL or SELECT to turn to «ON-mode». - Check the outlet: plug, voltage, fuse. No coffee, no water, unusual coffee flow. - Check if the water tank is correctly positioned, if empty, fill with potable water. - Descale the machine, if necessary. Coffee is not hot enough. The capsule lever does not close completely. Leakage (water under the machine). - P reheat cup. - Empty the capsule container. - Descale the machine, if necessary. - Check that no capsule is blocked inside the machine. (Note: do not put the finger inside the machine) - If problem persists, call the Nespresso Club. No coffee flow, water goes directly into the capsule bucket (despite inserted capsule). - Ensure capsule lever is closed. - Empty capsule bucket and check that no capsule is blocked inside the machine. (NOTE: do not put finger inside the machine) If problem persists, call the Nespresso Club. Colour display is dim and hard to see/ read. - Machine display dims automatically after 2 minutes of non use. - See paragraph on «Energy Saving Concept». - Press START/CANCEL or SELECT to turn to «ON-mode». - Adjust the screen brightness setting. Navigate to Settings menu. Select Screen Brightness. Turn the dial and Select High. Buttons flashing. - Follow on screen prompt. - Check the water tank. If empty, fill with potable water and brew a coffee. - Check steam tip for blockages. Use pin cleaning tool stored under the water tank to unblock each of the holes. - Descale machine, if necessary. - Complete a Clean Steam Wand cycle, if necessary. Fill Water Tank alert remains on display (water tank is full). - Check if the water tank is correctly positioned. - If problem persists, call the Nespresso Club. Descale Now alert is displayed. - D escale the machine. Navigate to Maintenance menu. - Select Descale and follow the on-screen prompts. Machine Error message is displayed. - A major fault has occurred. Machine is ON but ceases to operate. - P ower machine off by holding START/CANCEL. - Wait 60 minutes and press START/CANCEL or SELECT to turn to «ONmode». No steam or hot water. Machine turns to OFF mode.

Troubleshooting Milk Froth Preparation Milk steam cycle does not start.

heck if the water tank is correctly positioned, if empty, fill with potable water. - Check steam tip for any blockages and ensure wand is lowered. Quality of froth not up to standard. - B e sure to use whole or semi-skimmed milk at refrigerated temperature (about 4-6 °C / 39-43 F). For a better result, the milk must be newly opened. - Check the milk froth setting. Steam is very wet. - Use cold, potable water. Do not use highly filtered, demineralised or distilled water. Milk overflows. - Fill jug with appropriate milk volume. - Minimum fill level as marked on the inside & outside of the jug. - Maximum fill level as marked on the inside & outside of the jug. - To stop overflow, either reduce the initial volume of milk and/or reduce the froth level. This varies depending on milk type. Milk temperature is too hot. - Be sure to use the milk jug provided. - Check the milk jug is positioned correctly on the milk jug temperature sensor. - Decrease the milk temperature setting. Milk temperature is not hot enough. - Preheat cup. - Use the milk jug provided. - Check the milk jug is positioned on the milk jug temperature sensor. - Increase the milk temperature setting. - Check the steam tip for blockages. Lower Wand alert is displayed. - Ensure the steam wand is lowered. Clean Steam Wand alert is displayed. - Clean the Steam Wand. - Use the milk jug provided. - Clean both the milk jug and steam wand after each use. - Clean the steam wand. Navigate to Maintenance menu. - Select Clean Steam Wand and follow the on-screen prompts. - Navigate to Maintenance menu. Select Clean Steam Wand and follow the on-screen prompts. Dépannage Préparation Mousse de lait Le cycle de préparation de mousse ne démarre pas.