GeoVision 5055 iGo - Gps PRESTIGIO - Free user manual and instructions

Brand	Prestigio
Model	GeoVision 5055 iGo
Product Type	GPS Navigator
Display Size	5 inches
Display Resolution	800 x 480 pixels
Touchscreen	Resistive
Internal Memory	4 GB
Memory Expansion	microSD card slot
Preloaded Maps	iGO Primo (region-specific)
GPS Chipset	Sirf Atlas V
Battery Type	Rechargeable Lithium-Ion
Battery Life	Up to 3 hours
Charging	USB cable (DC 5V)
Dimensions	135 x 85 x 15 mm
Weight	180 g
Operating System	Windows CE 6.0
Connectivity	USB 2.0, microSD
Audio	Built-in speaker
Mount	Suction cup windshield mount
Power Adapter	12-24V car charger
Languages	Multiple (including English)
Cleaning	Wipe with soft dry cloth

Frequently Asked Questions - GeoVision 5055 iGo PRESTIGIO

How do I update the maps on my Prestigio GeoVision 5055 iGo?

To update maps, connect the device to a computer via USB. Download the latest iGO Primo maps from the official website or a trusted source, then copy them to the 'Content' folder on the device. Ensure you have a valid license.

Why won't my GPS turn on?

First, check the battery charge. Connect the device to the car charger or a USB power source. If it still does not turn on, try a hard reset by pressing the reset button (if available) or holding the power button for 10 seconds.

How do I calibrate the touchscreen?

Go to Settings > Display > Touch Calibration. Follow the on-screen instructions to tap the crosshairs. If the screen is unresponsive, use the stylus included with the device.

Can I use the GPS without a power cord?

Yes, the device has a built-in rechargeable battery that provides up to 3 hours of use. However, for continuous navigation in a vehicle, it is recommended to keep it plugged into the car charger.

How do I set a home address?

From the main menu, select 'Navigate' or 'Find Address'. Enter your home address and save it as a favorite. You can also set it as 'Home' in the address book for quick access.

What do I do if the GPS loses signal?

Ensure the device has a clear view of the sky. Avoid driving in tunnels, under heavy foliage, or between tall buildings. If the issue persists, check for firmware updates or reset the GPS receiver in settings.

How do I perform a factory reset?

Go to Settings > System > Factory Reset. Confirm the action. This will erase all personal data and restore the device to its original settings. Backup important data first.

Can I use a different mapping software?

The device runs on Windows CE 6.0, so it is possible to install other compatible navigation software. However, we recommend using the pre-installed iGO Primo for optimal performance.

How do I clean the screen?

Turn off the device and unplug it. Use a soft, lint-free cloth slightly dampened with water or a mild screen cleaner. Do not spray liquid directly on the screen.

What is the warranty period?

The standard warranty for Prestigio products is 12 months from the date of purchase. Keep your receipt as proof of purchase. Warranty does not cover accidental damage.

USER MANUAL GeoVision 5055 iGo PRESTIGIO

Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN!

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

1. To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
2. The manufacturer should not hold responsibility for the damage caused by any substitutions and modifications of the product without authorization from the manufacturer or authorized unit.

WARNING

The device should not be exposed to dripping or splashing and no objects filled with liquids should be placed on the device.

To prevent the GPS from being damaged, be sure to keep the GPS out of direct sunlight or heat. Maintain well-ventilated conditions around the unit to avoid overheating.

Accessories

Accessories List

ITEM	NAME
	Car Charger 1
	Mounting Cradle 1
	USB Cable 1
	Stylus Pen 1
	Driver/Documentation CD 1
	User Manual 1
	Warranty Card	1

View of Main Unit Device Connection

Front and Side View

1. LCD Touch Screen
   Tap the screen with a finger to select commands or use the included stylus.
2. Battery Status Indicator

The indicator glows in bright amber color when battery is fully charged and in red color when charging.

1. microSD Slot

Insert the SD card into the slot. Used for Mapping Data or user's music, photo or video.

1. Mini-USB Port

Connects to USB Cable for data access or battery charging
5. Headphone Port

Connect an earphone for private listening. When an earphone jack is plugged in, the speaker will be turned off automatically.

1. Reset Button
   Used to reset the device.
2. Power Button

Press to power ON/OFF device.

1. Speaker
   Emits sound, voice or music.
2. Stylus Pen

Used for writing on the LCD Touch Screen.

Inserting microSD Card

• To insert a microSD card, place connector towards device and card label towards the front side of the device.
• To remove a microSD card, gently press the edge of the card to release the safety lock and pull the card out of the slot.

NOTE:

Please always make sure that no application is accessing the microSD card before extraction.

Charging

1. Connecting to External USB Device

2. Flip open the protective rubber cover towards the front of the device.

3. Insert USB connector into the appropriate USB port.
4. Insert the other USB connector into USB port on PC to start charging.

Device Connection

Cautions on Battery Charging

2. Connecting to Car Charger

• Flip open the protective rubber cover towards the left side of the device.
• Insert USB connector into the appropriate USB port.
• Insert car charger connector into vehicle 12V accessory/cigarette socket to start charging.

NOTE:

Please connect the car charger to vehicle 12V accessory/cigarette socket after vehicle engine is started to protect the device from sudden surges in current.

Connecting to Earphones

• Flip open the protective rubber cover towards the front of the device.
• Insert earphone plug (not included) into the appropriate earphone port to switch audio output from device speaker to earphone.

NOTE:

Excessively loud volume is potentially detrimental to hearing. Please turn down the volume before connecting the earphone and gradually turn up the volume to a comfortable level.

About Rechargeable Battery

The device is equipped with a built-in rechargeable battery. Please fully charge the battery (for at least 8 hours) before initial use. The battery status indicator glows in red color when charging and turns bright amber color when charging is complete. Charging time is approximately 2 hours.

Working conditions and precautions for the rechargeable battery

● Device with new battery should be fully charged before initial use.
- It is not necessary to start charging the device before the battery is fully discharged.

Using Mounting Getting Started

Device Mounting Procedures

The device can be securely mounted on vehicle dashboard or windshield with the mounting cradle included. Please follow procedures below to operate mounting cradle:

1. Select an appropriate location on windshield or dashboard where the device and mounting cradle will not obstruct driver field of vision.
2. Please also make sure that the device has a clear view of sky to attain best GPS reception.

• Place device on the bracket with bottom positioned on the appropriate socket.
• Push on the top edge to securely install device onto the cradle.
• Lift the suction cup lever and press the suction cup at desired location.
• Press down the suction cup lever to secure the mounting cradle on the surface.
• Rotate the knob to adjust device to desired viewing angle.

1. Press and hold Power Button to turn on device.
2. Shortly after the startup screen is shown, the main menu will be displayed.
3. Tap the corresponding buttons with touch pen included to navigate various functions.
4. Press and hold Power Button to turn off the device or to allow device to enter sleep mode.

To Dismount Device

1. Push the tap on top of the mounting cradle to release the device.
2. Lift the suction cup lever to easily remove the suction cup from windshield or dashboard.

GPS

Navigation Menu

When Prestigio GeoVision is started the first time, you need to select whether to start the program in Simple mode or in Advanced mode.

The two operating modes of Prestigio GeoVision mainly differ in the menu structure and the number of available features. The controls and screen layouts are the same.

• Simple mode: you have easy access to the most important navigation functions and the basic settings only. The rest of the settings are set to values that are optimal for typical use.
  ● Advanced mode: you have access to the full functionality of Prestigio GeoVision.

This Guide covers actions in Simple mode. See the User Manual for detailed instructions on both modes.

Later you can switch between the two operating modes:

- To switch from Simple mode to Advanced mode: on the startup screen (Navigation

Menu), tap

Advanced Mode

● To switch from Advanced mode to Simple mode: on the startup screen (Navigation

Menu), tap

Single Mode

After selecting Simple mode, the Navigation menu appears. From here you can reach all parts of Prestigio GeoVision.

The Navigation menu contains the following options:

• Tap First Address to specify an address as your destination.
• Tap History for the list of recent destinations.
• Tap to select one of the stored Points of Interest.
• Tap ★ for the list of your favourite destinations.
• Tap Map to navigate or to browse the map.
• Tap Settings to customise the way Prestigio GeoVision works.
• Tap Exit to stop navigation, and exit Prestigio GeoVision.

Navigation Navigation

In the Navigation menu, tap

By default, Prestigio GeoVision proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. If needed, change the settlement:

- To select the settlement from the list of recently used ones, tap the button.

• To enter a new settlement:

1. Tap the button with the name of the settlement, or if you have changed the

1. Start entering the settlement name on the keyboard.

2. Get to the list of search results:

● After entering a couple of characters, the names that match the string appear in a list.

- Tap Done to open the list of results before it appears automatically.

1. Pick the settlement from the list.

Enter the street name:

1.

1. Start entering the street name on the keyboard.

2. Get to the list of results:

- After entering a couple of characters, the names that match the string appear in a list.

- Tap Done to open the list of results before it appears automatically.

1. Pick the street from the list.

Enter the house number:

1.

1. Enter the house number on the keyboard.

2. Tap Done to finish entering the address.

The map appears with the selected point in the middle. Tap from the Cursor menu. The route is then automatically calculated, and you can start navigating.

Navigation Navigation

mZ

On the Map screen, tap Menu to return to the Navigation menu.

In the Navigation menu, tap

Select the area around which the POI should be searched:

The POI will be searched around a given address.

The POI will be searched around the Cursor.

The POI will be searched around the current GPS position.

The POI will be searched around the destination of the active route.

The POI will be searched not around a given point but by the size of the detour it means from the active route. This can be useful if you search for a later stopover that causes only a minimal detour. For example upcoming petrol stations or restaurants After this, the list of POI categories appear.

You can narrow the search with the following:

• Select the POI group (e.g. Accommodation), and after that, if needed, select the POI subgroup (e.g. Hotel or Motel).
• To find the POI by its name, tap Search, and use the keyboard to enter a part of the name.
• To list all POIs in a given POI group, press without entering any letters of its name.

[optional] When finally the list of results appear, you can change the list order with the

or Order by button.

Tap the desired POI in the list.

The map appears with the selected point in the middle. Tap from the Cursor menu. The route is then automatically calculated, and you can start navigating.

Map Screen Troubleshooting

The most important and most often used screen of Prestigio GeoVision is the Map screen.

The map looks similar to a conventional road-map. The blue arrow represents your current position, and the green line shows the recommended route.

There are several screen buttons and data fields on the screen to help you navigate. Their functions are explained in detail in the User Manual.

During navigation, the screen shows route information and trip data (left screenshot), but when you tap the map, additional buttons and controls appear for a few seconds (right screenshot). Most parts of the screen behave as buttons.

Switches between 2D (classic top-down view) and 3D (perspective view

for navigation) map modes.

Opens the Navigation menu.

If you have moved the map, a

button appears. Tap this button to move the

map back to the current GPS position.

Take steps described in the tables below to solve simple problems before contacting customer service.

NOTE:

Immediately turn off the device and disconnect the power adapter if the device is not working properly. Never try to repair the unit without authorized professionals for it may damage the unit.

PROBLEM

Users can't turn on the unit.

POSSIBLE CAUSE

POSSIBLE SOLUTION

The adaptor doesn't connect well.

Connect the adaptor correctly.

The built-in rechargeable battery is weak.

Use the adaptor to supply power or charge the battery.

There is no sound.

The volume may be turned down or mute.

Turn up the volume or turn on the sound output.

There is no picture.

The brightness may be turned down.

Adjust the brightness of the LCD.

The unit can't receive satellite signals or can't orient.

The unit may be obstructed by buildings or metal block.

Make sure to use the unit out of room; if in the vehicle, you can use the external GPS antenna to solve this problem.

PC Connection Troublesh

PROBLEM

The unit can receive signals now but can't then; signals received are not stable.

POSSIBLE CAUSE

The built-in rechargeable battery is weak.	Use the adaptor to supply power or charge the battery.
The unit may be obstructed by veil, such as heat insulation paper.	Remove the veil.
Swing of the unit is too great.	Avoid great swing of the unit.

To establish connection with PC for data access and synchronization, please execute setup file included in the Driver/Documentation CD or download the file from Microsoft website to install:

Microsoft Active Sync® software for operating system Microsoft XP or earlier versions

(http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx)

and/or

Microsoft Mobile Device Center® software for operating system Microsoft Vista (http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx).

Please refer to its user manual for more detailed instructions.

Technical specifications Disclaimer

Model GV5055
GPS Receiver	MSR2320
Processor	MSB2531A Cortex A7, 800 MHz
RAM 128MB DDR2
Display 5" touch LCD
Resolution	480*272
Storage Capacity	4GB flash memory, Memory card slot supports micro SD card up to 16GB
Interface Mini USB
Battery 1050mAh Li-Polymer battery
Dimensions 137.5*88.5*1	2.5mm (L*H*W)
Weight	170g
Storage Temperature	-25°C~+70°C
Operating Temperature	-20°C~+60°C
Operating Relative Humidity	90%
Storage Relative Humidity	95%

CE As the Prestigio products are constantly updated and improved, your device's software and hardware may have a slightly different appearance or modified functionality than presented in this Quick Start Guide.

Prestigio hereby states that this GPS Navigator complies to basic requirements and another relevant regulations given by the EU directive1999/5/ES. Full version of the declaration of conformity is available on www.prestigio.com/certificates.

1

1. LCD οθόνη αφής

Chris, Master Mechanic

3,487 Satisfied Customers

Pearl is typing...

Ask your question...

Send

Experts are online now

Manual

View the manual for the Prestigio GeoVision 5055 iGo here, completely for free. This manual belongs to the navigators category and has been rated by 1 users with an average score of 5.6. The manual is currently available in the following languages: English. Do you have a specific question about the

1. Touch Screen LCD

W menu Navigation dotknij ikony

Aby powrócić do menu Navigation, dotknij na ekranie Map ikony

W menu Navigation dotknij ikony

• Postavite uređaj na nosač sa donjom stranom postavljenom na odgovarajući držač
• Pritisnite gornju stranu kako bi se osiguralo postavljanje uređaja
• Podignite ručicu za vacuum kapicu, i pritisnite je na Željeno mesto
• Pritisnite na dole ručicu da pričvrsitte opremu za montiranje na željenoj površini
• Rotirajte uredaj do željenog ugla

1. Pritisnite i zadr žite Power Taster da uključite uredaj.
2. Kratko nakon uvodnog ekrana, biće prikazan glavni meni
3. Dodirnite odgovarajuće tastere uz pomoć priložene olovke kako biste se kretali kroz funkcije
4. Pritisnite i zadr ž ite Power Taster da isključite uređaj ili da dozvlote uređaju ulazak u sleep mod.

1. ZaSin LCD na dotik

S prstom ali priloženim pisalom Stylus se dotaknite zaSlna in tako izbirajte ukaze.

1. Indikator stanja baterije

- Kartico mikro SD vstavite v napravo tako, da konektor obrnete proti napravi, oznaka pa mora biti obrnjena proti sprednji strani naprave.

• Napravo namestite na nosilec, tako da je spodnji del na ustreznem držalu.
• Pritisnite zgornji rob naprave, da jo varno namestite na nosilec.
• Primate podstavek s prisesalnimi nožicami in ga namestite na želeno mesto.
• Pritisnite podstavek s prisesalnimi nožicami, da zavarujete namestitveni nosilec.
• Zavrtite gumb in nastavite napravo na želeni kot gledanja.

Odstranjevanje naprave