Q: Where can I buy a replacement spool of line for the Wolf Garten GT 840?

Available nylon line spools for the GT 840: Reference 7130 085 GT-F7 - Nylon line spool with automatic feed (6-8 mm per activation) Reference 7136 085 GT-F8 - Nylon line spool with automatic feed (6-8 mm per activation) These spools are available from authorized Wolf Garten dealers, as well as from power tool spare parts distributors. You can also contact Wolf Garten customer service with the above references to find nearby retailers. When replacing, refer to the 'Maintenance' section of your manual for instructions on mounting the new spool.

Q: What is the power in watts and the volume of the collection box of the Wolf Garten Campus 32 E?

The PDF of this manual for the Wolf Garten Campus 32 E does not specify the motor power in Watts or the exact volume of the collection box in liters. Here is what the manual documents about this model: Power supply voltage: 230 V, 50 Hz Cutting width: 32 cm Weight: approximately 12 kg Collection box: Present with fill indicator Electric cable: Maximum 25 m (section 3 x 1.5 mm²) Recommended protection: RCD safety circuit breaker 30 mA For the exact values of power (Watts) and volume (liters), please refer to the nameplate attached under the chassis of the mower - this information is always indicated there by the manufacturer. You can also contact Wolf Garten directly referring to the product's serial number.

Q: What type of engine does the Wolf Garten A 460 A SP HW IS have - gasoline or electric?

The Wolf Garten A 460 A SP HW IS is equipped with a 4-stroke unleaded gasoline engine . It is indeed a gasoline mower, not an electric mower. However, this model features an electric start via a rechargeable lithium-ion battery provided with its charger. Therefore, you do not need to pull on a cord: simply press a push button to start the engine. This battery only powers the starter, not the entire mower which operates exclusively on gasoline. For use: Charge the battery before first use Fill the tank with unleaded gasoline Insert the battery correctly into the engine Press the start button The battery should be regularly recharged after use and kept dry. At the end of the season, check the condition of the battery and charger with a specialized workshop.

Q: How to replace a defective zekering (fuse) on the Expert 34 E lawn mower?

The Expert 34 E lawn mower does not have user-replaceable zekeringen (fuses) . The electrical protection works differently: Electrical protection of the device The mower is designed to operate on a 230V AC outlet protected by a 16 A zekering at the electrical circuit of your home . It is this wall protection that prevents overloads, not a user-replaceable internal fuse. Internal protections The device includes: A RCD system (residual current device) recommended for safety, with a maximum fault current of 30 mA A protection against overloads and safety switches A collection bag safety switch that prevents operation if the bag is not properly installed In case of electrical problem If the device does not start or if the 16 A zekering of your home regularly trips: Check that the power cord is not damaged Ensure that the collection bag is properly engaged Make sure that the electrical circuit is not overloaded If in doubt, contact the manufacturer: any internal electrical problem requires professional intervention Important: never repair a damaged cord - it must be completely replaced for safety reasons.

Question 1

Where can I buy a replacement spool of line for the Wolf Garten GT 840?

Accepted Answer

Available nylon line spools for the GT 840:

Reference 7130 085 GT-F7 - Nylon line spool with automatic feed (6-8 mm per activation)
Reference 7136 085 GT-F8 - Nylon line spool with automatic feed (6-8 mm per activation)

These spools are available from authorized Wolf Garten dealers, as well as from power tool spare parts distributors. You can also contact Wolf Garten customer service with the above references to find nearby retailers.

When replacing, refer to the 'Maintenance' section of your manual for instructions on mounting the new spool.

Question 2

How to disassemble and remove the spool holder from the LYCOS E500 T?

Accepted Answer

The disassembly of the spool holder from the Wolf Garten LYCOS E500 T depends on the model of your device. Follow the steps suitable for your version:

For Type 1

Press the two retaining tabs located on the spool cover.
Gently remove the cover along with the spool of wire.
Then remove the spool itself from its housing.
Clean the inside to eliminate any impurities before reinstalling a new spool.

For Type 2

Press firmly and simultaneously on the two retaining tabs of the cover.
Remove the cover and then the spool of wire.
Eliminate any accumulated impurities in the compartment.

Important: When reinstalling, ensure that the two retaining tabs click into place noticeably for a secure closure of the cover.

Question 3

What is the power in watts and the volume of the collection box of the Wolf Garten Campus 32 E?

Accepted Answer

The PDF of this manual for the Wolf Garten Campus 32 E does not specify the motor power in Watts or the exact volume of the collection box in liters.

Here is what the manual documents about this model:

Power supply voltage: 230 V, 50 Hz
Cutting width: 32 cm
Weight: approximately 12 kg
Collection box: Present with fill indicator
Electric cable: Maximum 25 m (section 3 x 1.5 mm²)
Recommended protection: RCD safety circuit breaker 30 mA

For the exact values of power (Watts) and volume (liters), please refer to the nameplate attached under the chassis of the mower - this information is always indicated there by the manufacturer. You can also contact Wolf Garten directly referring to the product's serial number.

Question 4

Where is the oil filler cap located on the Campus 440 BA?

Accepted Answer

The oil filler cap of the Wolf Garten Campus 440 BA is identified by the letter K in the diagrams of the manual. It is through this opening that you insert the dipstick to check the oil level before each use.

To check the oil:

Insert the dipstick into the oil filler opening (K) until the threads touch the edge
Check that the level reaches the Max mark without exceeding it
The oil reservoir holds between 0.5 and 0.6 liters of SAE 30

Remember to check the oil before each start and to plan an oil change after the first 5 hours of use, then every 25 hours or once per season.

Question 5

What type of engine does the Wolf Garten A 460 A SP HW IS have - gasoline or electric?

Accepted Answer

The Wolf Garten A 460 A SP HW IS is equipped with a 4-stroke unleaded gasoline engine. It is indeed a gasoline mower, not an electric mower.

However, this model features an electric start via a rechargeable lithium-ion battery provided with its charger. Therefore, you do not need to pull on a cord: simply press a push button to start the engine. This battery only powers the starter, not the entire mower which operates exclusively on gasoline.

For use:

Charge the battery before first use
Fill the tank with unleaded gasoline
Insert the battery correctly into the engine
Press the start button

The battery should be regularly recharged after use and kept dry. At the end of the season, check the condition of the battery and charger with a specialized workshop.

Question 6

How to block or immobilize the side ejection flap?

Accepted Answer

The side ejection flap (baffle) is designed to close automatically to ensure the safe use of your Wolf Garten A 530 mower. It does not have a permanent manual lock.

According to the manual:

Mulching mode: Raise the baffle/obturator to the side ejection position - it will then remain closed.
Side ejection mode: Remove the side guard - the baffle closes automatically thanks to its spring mechanism.
Access to components: To lift the baffle and access the ejection device, handle it gently. It naturally returns to its closed position.

Important maintenance: Once per season, lubricate the joints and the torsion spring of the ejection flap to ensure optimal operation of the automatic closing mechanism. Never operate without the baffle in place - it protects you from debris.

Question 7

How to use the side discharge (Seitenauswurf)?

Accepted Answer

The side discharge of the Wolf Garten A 530 A SP HW IS operates automatically once the mulching shutter is removed.

Normal use (with side discharge)

The mulching shutter/baffle must be removed from the side discharge
The grass is then automatically ejected sideways during mowing
No additional manual action is required during operation

Switching from mulching to side discharge

If you were using the mulching mode (grass shredding):

Remove the mulching shutter/baffle
The system automatically closes thanks to its spring mechanism
The side discharge resumes immediately

Important maintenance

To maintain proper operation of the side discharge, lubricate the joints and the torsion spring of the discharge flap once per season to ensure the mobility of the automatic closing mechanism.

Warning: Never operate without the protective baffle in place - it protects you from grass projections.

Question 8

Why is the motor not working?

Accepted Answer

If the motor of your Wolf Garten SDE 2800 EVO is not working, there are several checks to perform in order. Start by checking the power supply: ensure that the circuit breaker (minimum 16 amps) in your panel is active and reset it if it has tripped. Also, check that your installation has a 30 mA residual current device and that this circuit breaker has not tripped.

Next, inspect the power cable: visually check the plug and cable for damage (cuts, crushes, blackened areas). If the cable is damaged, do not use it — contact a specialized electrician to have it checked and replaced.

If you are using an extension cord, ensure that it does not exceed 25 meters in length and that its cross-section is at least 1.5 mm² (type HO7 RNF). For a longer extension, the cross-section must be at least 2.5 mm².

Check that the safety lock of the upper casing is properly engaged — this is a system that prevents the motor from starting if the casing is not properly closed. If the casing is not level with the motor casing, unscrew the cap, open the casing by folding it upwards, carefully clean the contact surface, then close and screw the cap back on.

If the motor hums but does not start, the cutting tool is likely blocked. Immediately unplug the power plug, then clean the inside of the device by removing any debris (branches, residues) especially near the blades. Once cleaned, press the reset button before restarting.

If the motor still does not engage after these checks, clean the filling funnel: unscrew the cap, open the casing by folding it upwards, remove any objects blocking the cutting tool in the cutting and evacuation areas, then close and screw back on. Then press the reset button before activating the on/off switch.

If after all these steps the motor still does not work, there may be an internal technical problem (defective capacitor for example) requiring professional repair. Contact an authorized Wolf-Garten repair shop.

Question 9

Why does the QC 25 eM charger light up red and not charge the battery?

Accepted Answer

Important note: The QC 25 eM normally displays a red light when charging the battery. If the light remains red but the battery does not charge after several minutes, this indicates a problem. Here’s how to diagnose it.

Checks to perform in order:

Clean the contacts - The most common cause. The contacts of the charger and the control handle can get dirty over time, preventing current transmission. Use a dry, clean cloth to gently clean the contact areas of the charging module and the battery.
Check the correct insertion of the battery - The control handle with the integrated battery module must be properly inserted into the charging module. Insert it firmly until you feel it is securely in place.
Check the temperature - The QC 25 eM can only charge if the battery and charger are between +10 °C and +40 °C (optimal temperature: around 24 °C). If the charger or battery is too hot (after intense use) or too cold (stored outdoors), allow them to reach the correct temperature before recharging. In this case, the light remains green until the temperature is correct.
Check the electrical fuse - If the charger does not turn on at all (no light), the fuse for the main connection to the network may have blown or is defective. Have a qualified electrician check and replace it. Do not attempt to repair it yourself.
Test with another battery - If you have another compatible one, try charging it. This will help you determine if the problem is with the battery or the charger.

The normal charging time for an empty battery is about 1 hour. If after 2 hours the battery still hasn’t charged and all the above checks have been performed, the battery or charger is likely defective. Contact a Wolf Garten dealer or a specialized workshop to have the charger and control handle checked. Do not continue to use a defective device.

Question 10

How to replace a defective zekering (fuse) on the Expert 34 E lawn mower?

Accepted Answer

The Expert 34 E lawn mower does not have user-replaceable zekeringen (fuses). The electrical protection works differently:

Electrical protection of the device

The mower is designed to operate on a 230V AC outlet protected by a 16 A zekering at the electrical circuit of your home. It is this wall protection that prevents overloads, not a user-replaceable internal fuse.

Internal protections

The device includes:

A RCD system (residual current device) recommended for safety, with a maximum fault current of 30 mA
A protection against overloads and safety switches
A collection bag safety switch that prevents operation if the bag is not properly installed

In case of electrical problem

If the device does not start or if the 16 A zekering of your home regularly trips:

Check that the power cord is not damaged
Ensure that the collection bag is properly engaged
Make sure that the electrical circuit is not overloaded
If in doubt, contact the manufacturer: any internal electrical problem requires professional intervention

Important: never repair a damaged cord - it must be completely replaced for safety reasons.

User manual Wolf Garten : user manuals and guides in PDF

Models Wolf Garten most viewed

Browse manuals Wolf Garten by appliance type

Recent questions about devices Wolf Garten