Q: Why does the refrigerator make a clicking noise at startup?

The clicking or popping noise you hear when you plug in your FAGOR FFJ6825N refrigerator is completely normal. It is the compressor starting up , an essential component for the circulation of the refrigerant R600A. This noise is particularly noticeable during the first startup, as the compressor activates an electrical relay to begin its operation. The occasional clicking sounds that follow during operation are also normal. To minimize this noise: Ensure that the appliance is level and stable on the floor. An uneven surface amplifies vibrations. Allow a minimum delay of 2 hours between transport/placement and plugging in the appliance, to let the internal fluids stabilize. Maintain a clearance of at least 25 mm between the back of the appliance and the wall, to allow for good air circulation and reduce resonances. Check that the shelves and containers are properly positioned and do not vibrate together. These startup and normal operating noises will quickly disappear once you get used to them. If the noise becomes excessive or abnormal (strong vibrations, continuous hissing), check the balance of the appliance and contact FAGOR support.

Question 1

Why does the refrigerator make a clicking noise at startup?

Accepted Answer

The clicking or popping noise you hear when you plug in your FAGOR FFJ6825N refrigerator is completely normal. It is the compressor starting up, an essential component for the circulation of the refrigerant R600A.

This noise is particularly noticeable during the first startup, as the compressor activates an electrical relay to begin its operation. The occasional clicking sounds that follow during operation are also normal.

To minimize this noise:

Ensure that the appliance is level and stable on the floor. An uneven surface amplifies vibrations.
Allow a minimum delay of 2 hours between transport/placement and plugging in the appliance, to let the internal fluids stabilize.
Maintain a clearance of at least 25 mm between the back of the appliance and the wall, to allow for good air circulation and reduce resonances.
Check that the shelves and containers are properly positioned and do not vibrate together.

These startup and normal operating noises will quickly disappear once you get used to them. If the noise becomes excessive or abnormal (strong vibrations, continuous hissing), check the balance of the appliance and contact FAGOR support.

Question 2

How to disable the alarm and the red light of the freezer?

Accepted Answer

Your Fagor FFA6815P refrigerator has two types of alarms concerning the freezer: an open door alarm and an insufficient temperature alarm.

Open door alarm: If the freezer (or refrigerator) door remains open for more than 2 minutes, an audible alarm sounds and the refrigerator light turns off. Simply close the door completely to immediately disable this alarm.

Insufficient temperature alarm and red light: When the temperature of the freezer is abnormally high, a light or icon appears along with an intermittent sound signal. To manually disable the sound signal, press the control buttons designated for this purpose on the control panel (refer to sections 4.2.4, 4.2.5, or 4.2.6 of the manual according to your configuration).

The light: This light will automatically turn off once the freezer returns to a normal temperature. Ensure that the door is properly closed, that nothing is blocking the rear ventilation grills, and that food is properly spaced to allow optimal air circulation.

Upon first use: When your appliance is initially connected, the light or icon may appear, but the audible alarm will not sound. This is normal, and the light will turn off once the temperature reaches the configured level.

If the alarm persists despite a normal temperature, check that you have not recently left the door open and that the appliance is functioning correctly. For specific needs, refer to the recommended temperature selection table in your user manual.

Question 3

The red light of the freezer does not turn off, what should I do?

Accepted Answer

The red indicator light of your FAGOR ZFK1747X freezer lights up when a power failure has interrupted operation and the internal temperature has exceeded -11°C. This indicates a "break in the cold chain".

To resolve this issue:

First, check that the appliance is properly plugged in and that the circuit breaker of your electrical installation has not tripped.
Once power is restored, wait a few hours for the freezer to drop below -11°C. The red light will turn off automatically.
If an audible alarm sounds (30 minutes after the power failure), you can stop it by pressing the alarm button on the appliance.
If the light remains on after restarting and several hours of normal operation, this may indicate a malfunction of the temperature sensor - contact FAGOR customer service.

Note: This light is a safety indicator. If it lights up without a visible power failure, it means the appliance has detected a significant thermal anomaly.

Question 4

The steam is not coming out of the iron - how to solve this problem?

Accepted Answer

If steam is not coming out of your FAGOR PLC-809CC iron, it is usually due to a simple and easily solvable issue. First, check that the low steam level indicator (i) is steadily lit (and not flashing). As long as this indicator is flashing, the generator is in preheating mode and cannot produce steam. Wait a few minutes until the indicator lights up steadily.

Next, check the water level in the tank by looking at the water level indicator (a) on the unit. If the water level indicator lights up, it means the tank is empty or insufficient. Press the water tank opening button (h), remove it, and fill it up to the MAX mark with tap water. Replace the tank and restart the preheating of the device.

If your iron has not been used for more than 15 minutes, the device has automatically switched to “Standby” mode: the power indicator is flashing. Press the I/O light switch (b) once to immediately reactivate the device.

Also check the anti-scale cartridge change indicator (g): if it is flashing, the anti-scale cartridge that purifies the water and removes hardness needs to be replaced. The lifespan of this cartridge depends on the hardness of your water. If you do not have a new cartridge, you can use distilled water instead of tap water. You will find replacement instructions in the chapter “Replacing the anti-scale cartridge” in your manual.

If after checking all these points the low steam level indicator (i) still does not light up or flash when starting, the generator is not heating properly. Do not use the device and contact an authorized FAGOR After-Sales Service immediately for professional repair, as forcing operation is dangerous.

Question 5

How to install or reattach the handle of the freezer compartment?

Accepted Answer

To install or reattach the handle of the freezer compartment of your Fagor 3FIS1224 refrigerator, follow this simple procedure:

Reassembly Steps:

Locate the screws - The handle is usually secured by two screws, one at the top and one at the bottom. These screws are often hidden under caps or plastic covers that can be unclipped or lifted with a flat screwdriver to access the screws.
Prepare a suitable screwdriver - You will need a flat or Phillips screwdriver depending on the type of screws. Completely unscrew the two screws at the top and bottom of the handle.
Install the new handle - Position the new handle by properly aligning the mounting holes with those on the freezer door. Insert the screws and tighten them securely, without forcing, alternating between the top and bottom to ensure even tightening.
Check the spring - Some models include a metal spring or a plastic clip. Make sure it is correctly installed or clipped before fully reattaching the handle.
Close the covers - Once the screws are tightened, reclip or re-screw the screw caps for a finished look and to protect the screws.

If the handle is broken or damaged, you can order an original Fagor replacement part by mentioning your model 3FIS1224 to specialized distributors of appliance spare parts. Ensure that the new handle model is compatible with your device.

Important - Make sure the handle is installed correctly before reusing the freezer, as a poorly secured handle could fall off or cause difficulties in opening the freezer door.

Question 6

What are the dimensions and main features of the FAGOR FL372?

Accepted Answer

The FAGOR FL372 is a compact yet efficient refrigerator-freezer:

Height: 185 cm
Width: 60 cm
Depth: 65 cm
Weight: 70 kg

Capacity: 250 liters in total (combining the refrigerator compartment and the integrated freezer at the bottom).

This model has an A++ energy class, offering an excellent balance between cooling performance and electricity consumption. It features interior LED lighting, adjustable glass shelves, and operates at a voltage of 220-240V with grounding.

Question 7

How to clean the inner glass of the FAGOR HP-7660 electric oven door?

Accepted Answer

To clean the inner glass of your FAGOR HP-7660 electric oven door, here are the recommended methods:

1. Cleaning with door disassembly

If you can disassemble the door, it makes access to the inner glass easier:

Remove the door by following the model-specific instructions (usually by opening the door to 45° and unclipping the hinges).
Prepare a baking soda paste: mix 3 parts water with 1 part baking soda.
Apply the paste to the inner glass and let it sit for about 15 minutes.
Gently scrub with a non-abrasive sponge to remove residues.
Rinse and dry before reassembling the door.
You can also use a diluted ammonia solution in hot water for a deeper clean.

2. Cleaning without disassembly

If you do not wish to disassemble the door:

Use a damp cloth with a little mild detergent.
Avoid steam or high-pressure cleaners that could damage the seal or components.
Gently scrub to avoid scratching the glass.

3. Using the pyrolysis function

The FAGOR HP-7660 oven has a pyrolysis function that automatically cleans the inside of the oven by burning away residues. After a pyrolysis cycle:

Use a damp cloth to remove the fine white ash remaining on the glass.
This method is effective for general cleaning but does not always replace a manual cleaning of the inner glass of the door.

By following these tips, you can keep the inner glass of your oven door clean and in good condition, ensuring good visibility and optimal operation.

Question 8

How to tighten a loose door handle on the FAGOR 6H755A B electric oven?

Accepted Answer

Before any intervention, make sure to disconnect your FAGOR 6H755A B oven from its power supply to avoid any risk of electric shock. Wait for the appliance to cool down completely.

The handle of your oven is generally secured by screws located inside the door, accessible by partially removing the inner glass panel. Here is the procedure to follow:

Open the door fully: Open the oven door as much as possible to access the inside of its structure.
Locate the securing screws: Inside the door, you will find screws that hold the handle, usually located above or below the outer glass panel, near the fixing areas.
Access the screws: Depending on your model, you may need to carefully remove the frame or support of the inner glass. Look for small metal or plastic supports that hold this glass in place.
Tighten the screws: Using an appropriate Phillips or flat screwdriver (depending on the type of screws), gently turn them clockwise. Do not overtighten to avoid damaging them or breaking the plastic.
Test the sturdiness: Before completely closing, test the handle by pulling it gently to check that the tension is correct and that it does not move anymore.

Important: If the screws are inaccessible or if you notice visible damage to the handle or its fixing mechanism, it is recommended to contact an authorized FAGOR after-sales service. Forcing access could damage the thermal door and compromise the oven's sealing.

Question 9

How to identify and use the faded buttons on a FAGOR 2HF-11E electric oven?

Accepted Answer

When the buttons on your FAGOR 2HF-11E electric oven are faded, it can be difficult to know which function corresponds to each button and in what order to use them. Here are some practical tips to help you:

1. Identify the functions of the buttons

The buttons on a standard electric oven typically include: the cooking mode selector (convection, grill, etc.), the temperature setting, and the timer or cooking duration.
Try to spot physical clues on the buttons, such as their size, position, or resistance to rotation, which can differentiate their function.
If you still have the manual or can find an image of the control panel online, this can help you associate each button with its function.

2. Typical order of use

Generally, start by selecting the cooking mode with the first button.
Then set the desired temperature with the second button.
Finally, if your oven is equipped with one, set the timer with the third button.

3. Test the buttons carefully

Turn each button slowly and observe the oven's reactions: a light turning on, a fan starting, heating activation, or a display on a screen.
Note the effects to better memorize the function of each button.

4. Temporary marking to facilitate use

Once the functions are identified, you can use stickers, tape, or a permanent marker to clearly indicate the function of each button.
This will prevent any confusion during future use.

These steps will allow you to use your oven despite the faded buttons and avoid operational errors.

Question 10

How to use the dough rising function on the FAGOR 6H876ATCX electric oven when the minimum adjustable temperature is 120°C?

Accepted Answer

The FAGOR 6H876ATCX electric oven offers a minimum temperature of 120 °C, which may seem too high for dough rising, which generally requires a lower temperature and a humid environment. Here are some tips to successfully rise dough despite this constraint:

Create a suitable environment for dough rising

Preheat then turn off the oven: Turn on the oven to 120 °C for a few minutes, then turn it off. Keep the oven door closed to retain residual heat, which will be lower than 120 °C and more suitable for rising.
Maintain humidity: Place a container with hot water in the turned-off oven with the dough. The steam creates a humid environment favorable for rising.
Temperature control: Use an oven thermometer to check that the internal temperature drops to around 30-40 °C, ideal for dough rising.

Other tips

If your oven has a special "rising" or "fermentation" function, use it.
Otherwise, you can also place the dough in a warm spot in the kitchen, such as near a radiator or in a turned-off oven with the light on.

In summary, even if the minimum adjustable temperature is 120 °C, it is possible to create a suitable environment for rising by using residual heat and humidity in the turned-off oven.

User manual FAGOR : user manuals and guides in PDF

Models FAGOR most viewed

Browse manuals FAGOR by appliance type

Recent questions about devices FAGOR