What does the error message 'E0 %' on my FAGOR DH-22 device screen mean and how can I resolve it?

Q: What does the error message 'E0 %' on my FAGOR DH-22 device screen mean and how can I resolve it?

The message 'E0 %' displayed on your FAGOR DH-22 dehumidifier screen generally indicates that there is a problem with a sensor or the power supply of the device. Before contacting technical support, please check the following points: Step 1: Check the power supply Ensure that the power cord is fully plugged into a functional electrical outlet (test with another device to verify that the outlet is supplying power) Check for any visible damage to the power cord or plug Check that the fuse in your electrical installation has not blown Step 2: Reset the device Unplug the device from the electrical outlet and wait for about 5 minutes Plug the dehumidifier back in and turn it on using the I/O button on the control panel Observe if the error message persists Step 3: Check operating conditions Ensure that the ambient temperature is between 5°C and 35°C (outside of these limits, the compressor does not operate correctly) Check that the water tank is properly installed in the closed position (otherwise, the display shows 'WATER FULL' and the device stops automatically) Clean the air intake filter located behind the grille to remove any dirt that may affect the sensors If the error persists despite these checks , it indicates an internal malfunction of the sensor or the electronic circuit of the device. Do not attempt to repair the device yourself. Only contact an Authorized Technical Support Service by FAGOR for professional diagnosis and possible repair. According to the manual, repairs made by unqualified personnel will incur your financial responsibility, even during the warranty period.

Question

Accepted Answer

The message 'E0 %' displayed on your FAGOR DH-22 dehumidifier screen generally indicates that there is a problem with a sensor or the power supply of the device. Before contacting technical support, please check the following points:

Step 1: Check the power supply

Ensure that the power cord is fully plugged into a functional electrical outlet (test with another device to verify that the outlet is supplying power)
Check for any visible damage to the power cord or plug
Check that the fuse in your electrical installation has not blown

Step 2: Reset the device

Unplug the device from the electrical outlet and wait for about 5 minutes
Plug the dehumidifier back in and turn it on using the I/O button on the control panel
Observe if the error message persists

Step 3: Check operating conditions

Ensure that the ambient temperature is between 5°C and 35°C (outside of these limits, the compressor does not operate correctly)
Check that the water tank is properly installed in the closed position (otherwise, the display shows 'WATER FULL' and the device stops automatically)
Clean the air intake filter located behind the grille to remove any dirt that may affect the sensors

If the error persists despite these checks, it indicates an internal malfunction of the sensor or the electronic circuit of the device. Do not attempt to repair the device yourself. Only contact an Authorized Technical Support Service by FAGOR for professional diagnosis and possible repair. According to the manual, repairs made by unqualified personnel will incur your financial responsibility, even during the warranty period.

User manual FAGOR Washing machine : user manuals and guides in PDF

Models FAGOR Washing machine most viewed

Other categories FAGOR

Recent questions about Washing machine FAGOR