How does the lid of the FAGOR SPLENDID PRESSURE COOKER work and how should it be maintained?

Question

Accepted Answer

The lid of the FAGOR SPLENDID PRESSURE COOKER is made of sturdy stainless steel and incorporates several essential safety systems to ensure reliable and controlled pressure cooking.

Locking system and pressure indicator: The purple locking button on the side of the lid must be pushed up (towards the lid) to lock the pressure cooker and allow pressure to build. To unlock, it must be pulled towards the end of the handle. On the lid handle is the pressure indicator, a yellow rod that automatically rises as pressure builds in the pressure cooker. As long as this rod is raised, there is still pressure inside, and the safety system physically blocks the locking button: the lid cannot be opened while pressure persists.

Operating valve and safety valves: The operating valve on the handle has three positions: pressure (pot symbol, 15 psi), steam release (steam symbol), and unlock (circle with a line through it). Under the lid is the main safety valve, which automatically activates in case of dangerous overpressure. An emergency venting grid is integrated into the edge of the lid: in case of extreme overpressure (for example, if both valves were blocked), it releases excess steam through this emergency opening. The silicone gasket that surrounds the underside of the lid ensures a complete seal between the lid and the pot.

Before each use: Check that the silicone gasket is in good condition, without cracks or deformities, and that it is properly positioned under the lid. Ensure that the operating valve is clean and free of food residues. Check that the locking button moves freely. Clean the opening under the valve with a fine brush if necessary to remove any blockage.

Cleaning and maintenance after each use: Always remove the silicone gasket from the lid after each use. Wash the lid by hand with hot water and mild soap, using a non-abrasive pad. Also wash the silicone gasket with soapy hot water, rinse well, and dry completely with a cloth. Then apply a thin layer of vegetable oil (olive oil, canola, or other) to the gasket to extend its lifespan and facilitate the locking of the lid. Never put the lid in the dishwasher and do not clean it with scouring pads or abrasive products: this would scratch the mirror finish of the stainless steel.

Replacing the gasket and storage: The silicone gasket should be replaced approximately every 12 to 15 months depending on usage frequency. You can order a replacement gasket from Fagor customer service (1-800-207-0806) or at www.fagoramerica.com. To store the pressure cooker, do not lock the lid: simply place it upside down on the pot. This prevents the formation of a vacuum inside the pressure cooker, which would make the lid difficult to open, and keeps odors from being trapped.

User manual FAGOR Pressure Cooker : user manuals and guides in PDF

Models FAGOR Pressure Cooker most viewed

Other categories FAGOR

Recent questions about Pressure Cooker FAGOR