Q: How to use the BEYERDYNAMIC Free BYRD?

The BEYERDYNAMIC Free BYRD is a wireless earphone with active noise cancellation. Here’s how to use it: Initial pairing Place the earphones in the charging case. Press twice on one earphone (left or right) and hold the second press until the LEDs flash alternately in orange and blue. Then select “Free BYRD” from your phone's Bluetooth list. Google Fast Pair is also supported on compatible devices. Main touch controls Single press: Play/pause or accept a call Double press: Toggle between noise cancellation (ANC) mode and transparency mode Triple press left: Previous track Triple press right: Next track Long press: Activate voice assistant Charging Place the earphones in the charging case and connect the supplied USB-C cable to a power charger, or place the case on a wireless Qi charger. The LEDs indicate the status: orange means charging, white means 100% charged. Disconnect the cable once fully charged to prolong battery life. Eartips The product includes 5 pairs of silicone eartips (sizes XS to XL) and 3 pairs of foam eartips (sizes S to L). Gently remove the current eartip and push the new one onto the earphone nozzle to find the optimal fit. For more details, refer to the complete manual for the BEYERDYNAMIC Free BYRD .

Q: Does the USB-C connection of the headset happen automatically?

Yes, the connection is fully automatic . Once you plug the USB-C cable of the MMX 150 headset into your device (computer, console, etc.), the driver installs automatically in a few seconds and the headset is ready to use. You will see the indicator light illuminate in orange, indicating that the device is operational. Note that the MMX 150 is a wired headset only - there is no wireless connection. Two cables are provided: a USB-C cable (2.4m) for USB connection and a 3.5mm jack cable (1.2m) for an analog connection. However, the advanced features of the headset (controls, Augmented mode) are only available via the USB connection.

Q: How to reset the BEYERDYNAMIC MMX 200 wireless headset?

Complete reset (factory settings restoration): Turn off the headset Press and hold the Power button for 16 seconds until the indicator light flashes The factory settings are then restored Clearing the Bluetooth pairing list: If you only want to remove paired Bluetooth devices without completely resetting the headset: Turn off the headset Press the Power button for 6 seconds The pairing list is cleared These procedures help resolve connectivity issues or restore the headset to its original configuration.

Question 1

How to use the BEYERDYNAMIC Free BYRD?

Accepted Answer

The BEYERDYNAMIC Free BYRD is a wireless earphone with active noise cancellation. Here’s how to use it:

Initial pairing

Place the earphones in the charging case. Press twice on one earphone (left or right) and hold the second press until the LEDs flash alternately in orange and blue. Then select “Free BYRD” from your phone's Bluetooth list. Google Fast Pair is also supported on compatible devices.

Main touch controls

Single press: Play/pause or accept a call
Double press: Toggle between noise cancellation (ANC) mode and transparency mode
Triple press left: Previous track
Triple press right: Next track
Long press: Activate voice assistant

Charging

Place the earphones in the charging case and connect the supplied USB-C cable to a power charger, or place the case on a wireless Qi charger. The LEDs indicate the status: orange means charging, white means 100% charged. Disconnect the cable once fully charged to prolong battery life.

Eartips

The product includes 5 pairs of silicone eartips (sizes XS to XL) and 3 pairs of foam eartips (sizes S to L). Gently remove the current eartip and push the new one onto the earphone nozzle to find the optimal fit.

For more details, refer to the complete manual for the BEYERDYNAMIC Free BYRD.

Question 2

Does the USB-C connection of the headset happen automatically?

Accepted Answer

Yes, the connection is fully automatic. Once you plug the USB-C cable of the MMX 150 headset into your device (computer, console, etc.), the driver installs automatically in a few seconds and the headset is ready to use. You will see the indicator light illuminate in orange, indicating that the device is operational.

Note that the MMX 150 is a wired headset only - there is no wireless connection. Two cables are provided: a USB-C cable (2.4m) for USB connection and a 3.5mm jack cable (1.2m) for an analog connection. However, the advanced features of the headset (controls, Augmented mode) are only available via the USB connection.

Question 3

How to reset the BEYERDYNAMIC MMX 200 wireless headset?

Accepted Answer

Complete reset (factory settings restoration):

Turn off the headset
Press and hold the Power button for 16 seconds until the indicator light flashes
The factory settings are then restored

Clearing the Bluetooth pairing list:

If you only want to remove paired Bluetooth devices without completely resetting the headset:

Turn off the headset
Press the Power button for 6 seconds
The pairing list is cleared

These procedures help resolve connectivity issues or restore the headset to its original configuration.

Question 4

How to disable the microphone mute?

Accepted Answer

If the microphone remains muted, here’s how to reactivate it:

Briefly press the control wheel on the headset. This wheel is located on the right earcup.
Check the LED indicator: a lit red light means the microphone is muted. When you press the wheel, the red LED turns off and the microphone is reactivated.
If you have an external microphone connected via the Mini 4-pole jack (3.5 mm), ensure it is properly connected. If it is removed, the built-in microphones in the headphones will automatically activate.

If the microphone remains muted after these steps, check that the battery is not low (LED blinks quickly in red) and recharge the headset if necessary.

Question 5

How to manage or modify the noise cancellation settings?

Accepted Answer

The BEYERDYNAMIC MMX 200 wireless does not have configurable active noise cancellation (ANC). It is a closed headset designed for gaming without this adjustment feature.

However, the headset offers the Augmented Mode, a practical alternative to let ambient sounds in:

To activate/deactivate Augmented Mode: Press and hold the control wheel for 2 seconds
The indicator light turns turquoise when the mode is active
Press and hold the wheel for 2 seconds again to deactivate the mode

This function allows you to hear your environment and your own voice more naturally, with no additional setup required.

User manual BEYERDYNAMIC : user manuals and guides in PDF

Models BEYERDYNAMIC most viewed

Browse manuals BEYERDYNAMIC by appliance type

Recent questions about devices BEYERDYNAMIC