Q: How to reset the ONE FOR ALL URC 4910 remote control?

To reset the universal remote control ONE FOR ALL URC 4910 , follow this specific procedure: Step 1: Press and hold the GREEN and YELLOW buttons simultaneously until the light blinks twice . Step 2: Press the numbers 977 on the numeric keypad. Step 3: Release the buttons. The light blinks 4 times and the remote control is completely reset to its factory settings. After this reset, all programmed codes and custom functions are deleted. The remote control returns to its original state. You will then need to reprogram the devices you wish to control according to the programming procedure for the URC 4910 model. This procedure is useful if the remote control is malfunctioning or if you need to troubleshoot programming issues. The batteries do not need to be removed to perform this reset.

Q: Does the 'Tools' button on the ONE FOR ALL URC 4910 remote control have the same function as the 'Setup' button?

On the ONE FOR ALL URC 4910 remote control, there is actually no physical 'Setup' button . This confusion is common: 'Setup' refers to the programming methods of the remote control itself (SimpleSet or Code Setup), not to a command button. The 'TOOLS' button (button 23) is a real command button that allows you to quickly access the specific settings or tools of the controlled device (TV, decoder, etc.). It sends an infrared signal to the device to open its tools menu or quick settings. If you are looking for a button to access your device's menus, it is the 'MENU' button (button 14) that serves this function. It opens the main menu of the device. You can then navigate with the directional arrows and confirm with the 'OK' button (button 18). In summary: on the URC 4910, 'Setup' is not a command button, but rather the process used to program and configure the remote control itself so that it works with your devices. Once programmed, you use the MENU, TOOLS, and other command buttons to control your devices.

Q: What does the symbol on the SETUP button of the ONE FOR ALL URC 4910 remote look like?

On the ONE FOR ALL URC 4910 remote, the SETUP button is typically identifiable by a distinctive symbol that makes it easy to recognize. This symbol may vary slightly depending on the versions, but it often appears in one of the following forms: A pictogram representing a gear or a wrench , universal symbols for settings and configurations. A simple label with the word SETUP written on it. A rectangle or geometric shape framing the text or symbol. This button is usually located in the top row of buttons, often on the left or in the center, and it stands out due to its appearance being different from other standard buttons. In summary, look for a button marked SETUP or adorned with a symbol suggesting settings, like a gear, to easily identify this function on your ONE FOR ALL URC 4910 remote.

Question 1

What code to use to set up a Thomson TV with the URC 7140 remote control?

Accepted Answer

The ONE FOR ALL URC 7140 remote control has a comprehensive list of TV codes by brand, available on pages 92-105 of the manual. For a Thomson or RV Thomson TV, you will need to:

Locate the brand "Thomson" or "RV" in the code tables on pages 92-105
Find the 4-digit code corresponding to your TV model
Press and hold the Magic button for 3 seconds until the indicator blinks
Select the device type (TV)
Enter the 4-digit Thomson code
Press the Power button to confirm

If you have the PDF manual in digital format, you can directly access pages 92-105 to check the exact code for your Thomson model.

Question 2

What to do if the "TOOL" button on the ONE FOR ALL URC 4910 remote control is not working?

Accepted Answer

The TOOLS button on the ONE FOR ALL URC 4910 remote control allows access to the tools and settings of your Samsung TV. If this button is not working, follow these step-by-step troubleshooting steps.

Check the batteries: Start by ensuring that the batteries are properly installed in the compartment located at the back of the remote control. Replace them with two new batteries (LR03/AAA) if they seem worn out, as insufficient power may prevent some buttons from functioning properly.

Test the TOOLS button with the learning procedure: Follow this precise procedure: first, make sure your Samsung TV is turned on (not in standby). Press and hold the RED and BLUE buttons simultaneously until the LED (light-emitting diode) located behind the POWER button blinks twice. Then point the remote control at your TV and hold down the TOOLS button. The remote will send the signal every 3 seconds to your TV. As soon as the Tools or Settings function appears on your TV screen, release the button. If the LED blinks twice, the procedure was successful and the button should work.

Reset the remote control: If the problem persists, reset the remote control to its factory settings: press and hold the GREEN and YELLOW buttons together until the LED blinks twice, then press the code 977. The LED will blink 4 times to confirm the reset. Then test the TOOLS button again.

Check the infrared sensor: Inspect the infrared area located at the front of the remote control to ensure it is not covered in dust or debris. Gently clean the surface with a dry, lint-free cloth. Also, make sure there are no obstacles between the remote control and your TV.

Check compatibility: The TOOLS button is designed to work with Samsung TVs that are compatible with learning codes. If your TV is not a Samsung or does not support this function, it is possible that this button may not work for that particular model.

If after these checks the TOOLS button continues to not function properly, it is likely that there is a hardware defect (faulty contact or electronic issue with the button itself). In this case, contact ONE FOR ALL customer service or consider replacing the remote control.

Question 3

How to reset the ONE FOR ALL URC 4910 remote control?

Accepted Answer

To reset the universal remote control ONE FOR ALL URC 4910, follow this specific procedure:

Step 1: Press and hold the GREEN and YELLOW buttons simultaneously until the light blinks twice.
Step 2: Press the numbers 977 on the numeric keypad.
Step 3: Release the buttons. The light blinks 4 times and the remote control is completely reset to its factory settings.

After this reset, all programmed codes and custom functions are deleted. The remote control returns to its original state. You will then need to reprogram the devices you wish to control according to the programming procedure for the URC 4910 model.

This procedure is useful if the remote control is malfunctioning or if you need to troubleshoot programming issues. The batteries do not need to be removed to perform this reset.

Question 4

Does the 'Tools' button on the ONE FOR ALL URC 4910 remote control have the same function as the 'Setup' button?

Accepted Answer

On the ONE FOR ALL URC 4910 remote control, there is actually no physical 'Setup' button. This confusion is common: 'Setup' refers to the programming methods of the remote control itself (SimpleSet or Code Setup), not to a command button.

The 'TOOLS' button (button 23) is a real command button that allows you to quickly access the specific settings or tools of the controlled device (TV, decoder, etc.). It sends an infrared signal to the device to open its tools menu or quick settings.

If you are looking for a button to access your device's menus, it is the 'MENU' button (button 14) that serves this function. It opens the main menu of the device. You can then navigate with the directional arrows and confirm with the 'OK' button (button 18).

In summary: on the URC 4910, 'Setup' is not a command button, but rather the process used to program and configure the remote control itself so that it works with your devices. Once programmed, you use the MENU, TOOLS, and other command buttons to control your devices.

Question 5

What does the symbol on the SETUP button of the ONE FOR ALL URC 4910 remote look like?

Accepted Answer

On the ONE FOR ALL URC 4910 remote, the SETUP button is typically identifiable by a distinctive symbol that makes it easy to recognize. This symbol may vary slightly depending on the versions, but it often appears in one of the following forms:

A pictogram representing a gear or a wrench, universal symbols for settings and configurations.
A simple label with the word SETUP written on it.
A rectangle or geometric shape framing the text or symbol.

This button is usually located in the top row of buttons, often on the left or in the center, and it stands out due to its appearance being different from other standard buttons.

In summary, look for a button marked SETUP or adorned with a symbol suggesting settings, like a gear, to easily identify this function on your ONE FOR ALL URC 4910 remote.

Question 6

How to set up the ONE FOR ALL URC 4910 remote control?

Accepted Answer

To set up the ONE FOR ALL URC 4910 universal remote control to work with your device (TV, DVD player, etc.), follow these steps:

Steps to set up the ONE FOR ALL URC 4910 remote control

Turn on the device you want to control (for example, your television).
Press the SETUP button on the remote and hold it until the LED light stays on, then release the button.
Select the type of device by pressing the corresponding button (for example, TV). The light will blink and then stay on.
Enter the brand code for your device using the number pad on the remote. The LED light will turn off if the code is correct. If the light blinks, it means the code is incorrect.
Test the remote by trying to control your device. If it doesn't work, repeat the procedure with another code corresponding to your device's brand.

If you encounter difficulties, it is advisable to try several available codes for your brand, as some models may require different codes.

Question 7

Is the ONE FOR ALL URC 4910 remote compatible with LG devices?

Accepted Answer

Yes, the universal remote ONE FOR ALL URC 4910 is compatible with LG devices, including televisions and soundbars. Most modern LG devices should work directly with this remote without complex setup.

To program the URC 4910 with an LG television:

Make sure your LG television is turned on (not in standby).
Press and hold the RED + BLUE buttons until the LED light under the PWR button blinks twice.
Point the remote at your TV and hold down the PWR (On/Off) button until your television turns off. The remote will send a different signal every 3 seconds.
As soon as the TV turns off, release the PWR button. The light will blink twice.
Test the other buttons (volume, channel, menu) to check that the programming has worked correctly.

If some buttons do not work:

Press and hold the RED + BLUE buttons until the light blinks twice.
Point at the TV and hold down the button that is not working (for example MENU) while the remote sends signals every 3 seconds.
Release the button as soon as the function appears on the screen.

For LG soundbars or audio devices: Press and hold the VOLUME + and VOLUME - buttons until the light blinks twice, then hold down the number 4 on the remote (SimpleSet code for LG and JVC). The remote will send the Mute signal every 3 seconds. As soon as your LG audio device mutes the volume, release the number 4.

Learning function: If you have the original remote for your LG, you can also use the learning function of the URC 4910. Press and hold the GREEN + YELLOW buttons until the light blinks twice, then press 975. Then select the button to learn and learn it from your original LG remote.

The URC 4910 offers excellent compatibility with LG devices thanks to its automatic search capability and learning function, ensuring optimal use even with specific LG models.

User manual ONE FOR ALL : user manuals and guides in PDF

Models ONE FOR ALL most viewed

Browse manuals ONE FOR ALL by appliance type

Recent questions about devices ONE FOR ALL