SV 9601 - TV signal amplifier ONE FOR ALL - Free user manual and instructions

Product Type	TV Signal Amplifier
Brand	ONE FOR ALL
Model	SV 9601
Input	1 x Coaxial (F-type) for cable TV, TV receiver, or FM
Output	1 x Coaxial (F-type) amplified output
Power Supply	5V DC via included adapter (mains plug)
LED Indicator	Green when powered on
Mounting	Wall mountable with keyhole slots
Ventilation	Minimum 5 cm clearance around unit
Operating Environment	Indoor, moderate climate (not tropical)
Safety	Do not expose to rain or moisture; keep away from heat sources
Warranty	1 year from date of purchase
Included Accessories	Power adapter, foam feet, user manual
Compatibility	DVB-C / DVB-C2, FM radio, any coaxial device
Cleaning	Wipe with dry cloth; do not use liquids

Frequently Asked Questions - SV 9601 ONE FOR ALL

How do I connect the ONE FOR ALL SV 9601 Signal Amplifier?

Connect your coaxial cable (from cable TV, receiver, etc.) to the Input (C). Then connect your TV or other device to one of the Output ports (D). Plug the power adapter into the Power Input (B) and then into a wall outlet. The LED Indicator (E) will light up when powered.

Why is the LED not turning on?

Ensure the power adapter is securely plugged into the amplifier and the wall outlet. Check if the outlet is working. If the LED still doesn't light, the adapter or unit may be defective.

Will this amplifier improve a bad picture?

The amplifier boosts the signal but also amplifies noise. If the incoming signal is already poor (e.g., snowy picture), the amplifier may not improve quality. Contact your cable provider for a stronger signal.

Can I mount the amplifier on a wall?

Yes, use the two holes at the back (F) for wall mounting. Ensure the area is well-ventilated and the power cord can reach an outlet.

Can I use this amplifier with an FM antenna?

Yes, the amplifier works with FM signals. Connect the FM coaxial cable to the Input (C) and connect your radio tuner to an Output (D). See diagram 5 in the manual.

What is the maximum cable length I can use?

The amplifier compensates for signal loss over long cables. For best results, keep total cable length under 30 meters (100 feet). Performance may vary.

Is the amplifier compatible with all TV receivers?

It works with any device that uses a standard coaxial connection, including DVB-C, DVB-C2 receivers, and FM tuners. For HD signals, it supports all frequencies.

How do I clean the amplifier?

Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Ensure no liquid enters the ventilation openings.

What does the warranty cover?

ONE FOR ALL warrants the product against defects in materials and workmanship for one year from the original purchase date. Proof of purchase is required. The warranty does not cover misuse, modification, or improper installation.

Can I connect multiple TVs to this amplifier?

This model has a single output. To connect multiple devices, you need a separate splitter after the amplifier. The amplifier boosts the signal to compensate for splitting losses.

USER MANUAL SV 9601 ONE FOR ALL

• Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. In English this means; For safety reasons, please ensure that the power plug (to mains) is easily accessible (not blocked or covered) so it can be used to disconnect the device.
• Please ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
• Please ensure that the ventilation is not impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
• Do not place near naked flame sources, such as lighted candles.
• To reduce the risk of fire or electric shocks do not expose this apparatus to rain or moisture, dripping or splashing.
• Use the apparatus only in moderate climates (not in tropical climates).

Guarantee English UNIVERSAL ELECTRONICS / ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. This product will be repaired or if necessary replaced free of charge if it has been proven to be defective within the one (1) year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS / ONE FOR ALL.

This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS / ONE FOR ALL, or which result from not mounting the product according to manual instructions. This also applies when the product has been modified / repaired by others than UNIVERSAL ELECTRONICS / ONE FOR ALL or if a fault is the result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness.

To obtain warranty service during the warranty period, please notice that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes which are not related to your trade, business or profession, please remind that you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights.

We're ready to assist with the installation

Support

Learn about One For All products, download manuals, watch instruction videos or get in contact with our Customer Service Team for personal assistance.

Universal Electronics BV Europe & International P.O. Box 3332 7500 DH, Enschede The Netherlands

White handheld device labeled 'ONE FOR ALL' with a circular lens and control buttons (no additional text or symbols visible)

SV 9601

709660

RDN-1061017

Instruction Manual

1

A

2

3

4

5

THANK YOU

Thank you for purchasing the ONE FOR ALL Signal Amplifier. ONE FOR ALL continuously strives to develop, produce and market high-quality innovative products to meet your needs. We hope this Signal Amplifier will give you total satisfaction.

THE PRODUCT

The ONE FOR ALL Signal Amplifier is designed to boost the signal of your cable box, this allows you to distribute the signal to multiple devices and/or use longer cables without losing picture and sound quality.

Below you'll find the description of your ONE FOR ALL Signal Amplifier (see picture 1).

1

A. Power adapter (power plug)

B. Power adapter input

C. Signal input

D. Signal outputs

E. LED indicator (ON / OFF)

F. Holes for wall mounting

G. Space for foam feet

CONNECTING THE SIGNAL AMPLIFIER

To connect your ONE FOR ALL Signal Amplifier, please follow the steps below:

- Stick the foam feet at the bottom of the ONE FOR ALL Signal Amplifier (G).

- Connect your TV or other device to the signal output (D)

- Connect your cable TV coaxial cable or other device (see picture 2) to the input (C) on the ONE FOR ALL Signal Amplifier.

- Plug the power adapter to the input (B) on the ONE FOR ALL Signal Amplifier.

- Plug the power adapter into the mains (A).

- Check if the LED indicator illuminates (E).

Wall mount installation

- You can use the holes at the back of the ONE FOR ALL Signal Amplifier for wall mount installation (F).

Examples of different situations (pictures 2 – 5):

2 A coaxial cable for your cable TV (DVB-C / DVB-C2) is connected to the input (IN) of the ONE FOR ALL Signal Amplifier. The signal will be boosted and distributed to 1 TV or another device.

3 The coaxial output of a TV receiver (DVB-C / DVB-C2) is connected to the input (IN) of the ONE FOR ALL Signal Amplifier. The signal will be boosted and distributed for 1 TV or another device.

4 A coaxial cable for your cable TV (DVB-C / DVB-C2) is connected to the coaxial input of a TV receiver, which is connected to the HDD / DVD recorder. The coaxial output of the HDD / DVD recorder is connected with the input (IN) of the ONE FOR ALL Signal Amplifier. The signal will be boosted and distributed to 1 TV or another device.

5 The FM is connected to the input (IN) of the ONE FOR ALL Signal Amplifier which will boost the signal and distribute it to 1 radio tuner.

(*) It may be possible that you have to use inline coax-connectors to make the connections. (See picture).

HELPFUL HINTS

If the picture or sound quality is unsatisfactory, please follow the helpful hints below:

- If the incoming signal is unclear, the ONE FOR ALL Signal Amplifier will not improve

your picture as it will also amplify the noise in the signal. Please contact your cable TV

installer for further details.

- Check all the connections. Loose or bad connections will result in an unclear picture.