Question 1

What code to use to set up a Thomson TV with the URC 7140 remote control?

Accepted Answer

The ONE FOR ALL URC 7140 remote control has a comprehensive list of TV codes by brand, available on pages 92-105 of the manual. For a Thomson or RV Thomson TV, you will need to:

Locate the brand "Thomson" or "RV" in the code tables on pages 92-105
Find the 4-digit code corresponding to your TV model
Press and hold the Magic button for 3 seconds until the indicator blinks
Select the device type (TV)
Enter the 4-digit Thomson code
Press the Power button to confirm

If you have the PDF manual in digital format, you can directly access pages 92-105 to check the exact code for your Thomson model.

Question 2

How to pair the ONE FOR ALL SIMPLE 2 with a device?

Accepted Answer

The ONE FOR ALL SIMPLE 2 has two main methods to pair your device, depending on whether your brand is listed in the manual provided with the remote control.

SimpleSet Method (for listed brands)

Check the list of compatible brands in the manual to find the number associated with your brand
Turn on your device (not in standby mode)
Press and hold the green and yellow buttons for 3 seconds until the indicator blinks twice
Point the remote control at your device
Press and hold the number button corresponding to your brand
Release this button as soon as your device turns off (this process may take up to 40 seconds)
Your remote control is ready to use

Auto Search Method (for other brands)

Turn on your device (not in standby mode)
Press and hold the green and yellow buttons for 3 seconds until the indicator blinks twice
Point the remote control at your device
Press OK once
The remote control automatically sends different power-on signals every 3 seconds to test all codes in memory
Press OK once as soon as your device turns off (you have 3 seconds to do this)
Your remote control is ready to use

If the device turns off but does not turn back on: you may have pressed OK too late. Manually turn the device back on, then press and hold the green and yellow buttons for 3 seconds, point at the device and repeatedly press CH- until it turns off again. Press OK as soon as it turns off to save the settings.

If neither method works: use the COPY function to copy commands from your original remote control. You can also simply repeat SimpleSet or Auto Search, as a better configuration may exist for your device.

User manual ONE FOR ALL Universal remote : user manuals and guides in PDF

Models ONE FOR ALL Universal remote most viewed

Other categories ONE FOR ALL

Recent questions about Universal remote ONE FOR ALL