Q: What does the EU error code mean on the EPUR660 air purifier?

The EU error code indicates a "PM2.5 sensor communication failure" . This means that the communication between the air quality sensor (PM2.5) and the main control system of the device is not functioning properly. What to do: This type of error requires technical intervention and cannot be resolved by a simple reset or user cleaning Contact EAS Electric's customer service or technical support to have an authorized technician intervene Do not attempt to repair it yourself, as this is a hardware fault in the sensor system

Q: What type of refrigerant does this model use?

The refrigerator EMR177ASI uses R600a gas as a refrigerant. Important features: R600a is an eco-friendly natural gas , but it has a critical characteristic: it is explosive . This information is crucial for safety. You can check the exact type of refrigerant on the adhesive label located on the left interior side of the appliance . In case of a leak due to a shock or damage , immediately move the refrigerator away from any open flame or heat source, and ventilate the room for a few minutes. During transport and installation, do not damage the refrigerant gas circuit to avoid leaks.

Q: What does error code E33 mean on my EAS Electric EMTD81B dryer?

The error code E33 means there is a problem with the temperature sensor of your EAS Electric EMTD81B dryer. This sensor is responsible for measuring the temperature inside the drum to adjust the drying cycle. When it is not functioning properly, the appliance displays this fault code and interrupts the drying process. Possible solutions: Restart the appliance - Turn off the dryer and leave it unplugged for 10 minutes, then turn it back on. Check the lint filter - A clogged filter can affect air circulation. Clean it by removing the filter cassette located at the front of the appliance. Contact technical service - If the error persists, the sensor is likely faulty. Only an authorized EAS Electric technician can replace it.

Question 1

My EAS Electric EMSS179AX1 refrigerator is not making ice

Accepted Answer

Here are the steps to diagnose and resolve this issue with your EAS Electric EMSS179AX1 refrigerator:

Essential Checks

Check that the ICE OFF button is not activated. This button completely disables ice production - if it is on, press it to turn it off.
If you have just turned on the appliance, wait 24 hours before the first ice. It is normal for the system to take this time to cool the circuit.
Ensure that the freezer door remains closed while the ice-making process is operating. The system will stop automatically if the door is opened.

Clumped Ice

If ice has formed but is stuck together in the tray:

Remove the ice tray
Gently separate the ice cubes with a wooden or plastic spoon (do not use metal)
Thoroughly clean the tray with a neutral detergent and water

Water Pressure Check

The water system must have sufficient pressure to operate. According to the manual, the minimum and maximum allowable pressure is 0.8 to 1.5 MPa. If the pressure is too low, the ice will not form properly. Contact your water supplier or a plumber to measure the pressure.

After Prolonged Use

If the appliance has not been used for a long time, drain about 2 liters of water before starting again. For ice, discard the first half tray (about 24 hours of production) as the water in the circuit may have stagnated.

If after these checks the ice still does not form, contact EAS Electric technical service.

Question 2

What does the EU error code mean on the EPUR660 air purifier?

Accepted Answer

The EU error code indicates a "PM2.5 sensor communication failure". This means that the communication between the air quality sensor (PM2.5) and the main control system of the device is not functioning properly.

What to do:

This type of error requires technical intervention and cannot be resolved by a simple reset or user cleaning
Contact EAS Electric's customer service or technical support to have an authorized technician intervene
Do not attempt to repair it yourself, as this is a hardware fault in the sensor system

Question 3

How do I adjust the temperature of the EMC186ASGN refrigerator?

Accepted Answer

To lower the temperature of your EAS Electric EMC186ASGN refrigerator:

Use the control panel located inside the refrigerator to adjust the temperature according to your needs. The manufacturer recommends setting the temperature between 3°C and 5°C for optimal food preservation.

If you need specific details about the control buttons or specific quick cooling modes, please refer to the complete manual available in PDF on this page.

Question 4

What type of refrigerant does this model use?

Accepted Answer

The refrigerator EMR177ASI uses R600a gas as a refrigerant.

Important features:

R600a is an eco-friendly natural gas, but it has a critical characteristic: it is explosive. This information is crucial for safety.
You can check the exact type of refrigerant on the adhesive label located on the left interior side of the appliance.
In case of a leak due to a shock or damage, immediately move the refrigerator away from any open flame or heat source, and ventilate the room for a few minutes.
During transport and installation, do not damage the refrigerant gas circuit to avoid leaks.

Question 5

How do I remove the glass from the door of the EMV70DGW oven?

Accepted Answer

Here is the complete procedure for removing the glass from your EAS Electric EMV70DGW oven:

Before you begin

Important: Handle the parts and glass with great care, as breakage due to improper handling is not covered by the warranty.

Disassembly steps

Open the door fully and pull the metal latch outward
Close the door at an angle of about 15°
Gently pull the inner glass upwards and remove it slowly
Lift the glass by about 25° to create the necessary space
Push the glass in the direction indicated by the arrow engraved on the frame
For the middle glass: gently lift the rubber and remove it

Reassembly

Perform the above steps in reverse order to replace the glass.

Question 6

What does error code E33 mean on my EAS Electric EMTD81B dryer?

Accepted Answer

The error code E33 means there is a problem with the temperature sensor of your EAS Electric EMTD81B dryer.

This sensor is responsible for measuring the temperature inside the drum to adjust the drying cycle. When it is not functioning properly, the appliance displays this fault code and interrupts the drying process.

Possible solutions:

Restart the appliance - Turn off the dryer and leave it unplugged for 10 minutes, then turn it back on.
Check the lint filter - A clogged filter can affect air circulation. Clean it by removing the filter cassette located at the front of the appliance.
Contact technical service - If the error persists, the sensor is likely faulty. Only an authorized EAS Electric technician can replace it.

User manual EAS Electric : user manuals and guides in PDF

Models EAS Electric most viewed

Browse manuals EAS Electric by appliance type

Recent questions about devices EAS Electric