EMD141BI-V1 - Dishwasher EAS Electric - Free user manual and instructions

Type de produit	Lave-vaisselle encastrable
Marque	EAS Electric
Modèle	EMD141BI-V1
Dimensions (L x H x P)	60 cm x 85 cm x 60 cm
Poids	45 kg
Alimentation	220-240 V, 50 Hz, 10 A
Capacité	12 couverts
Niveau sonore	44 dB
Nombre de programmes	6 (Intensif, Éco, Rapide, Verres, Prélavage, Auto)
Fonctions spéciales	Départ différé (1-24 h), Séchage extra, Demi-charge
Classe énergétique	Classe E (ancienne A+ estimé)
Consommation d'eau	9 L par cycle (programme éco)
Consommation électrique	0,92 kWh par cycle (programme éco)
Type d'installation	Encastrable (panneau de porte personnalisable)
Matériau de la cuve	Acier inoxydable
Sécurité	Anti-fuite, sécurité enfants, verrouillage des touches
Entretien et nettoyage	Nettoyage régulier des filtres et des bras de lavage
Pièces détachées disponibles	Filtres, bras de lavage, paniers, joints
Indice de réparabilité	7,5 / 10 (estimé, vérifier sur le site officiel)
Pays de fabrication	Chine

Frequently Asked Questions - EMD141BI-V1 EAS Electric

How to install the EMD141BI-V1 dishwasher?

Installation must be carried out by a qualified professional. Ensure the appliance is level and that the water and electrical connections comply with current standards. Refer to the full manual for detailed instructions.

What washing programs are available?

The appliance offers 6 programs: Intensive (very dirty pots), Eco (water and energy savings), Quick (lightly soiled dishes), Glass (delicate), Pre-wash (quick rinse) and Auto (automatic dirt detection).

How to clean the dishwasher filters?

Turn off the appliance and remove the lower basket. Unscrew the main filter and the fine filter, rinse them under running water with a soft brush. Reassemble everything. Perform this operation every month to avoid blockages.

What to do if the dishwasher does not start?

First check that the appliance is plugged in and the water inlet tap is open. Make sure the door is properly closed. If the problem persists, consult the troubleshooting section of the manual or contact customer service.

How to set the delayed start?

Press the Delayed start button to select a delay from 1 to 24 hours. The display shows the remaining time before start. Confirm by pressing Start.

What is the maximum capacity in place settings?

The EMD141BI-V1 dishwasher can wash up to 12 standard place settings. For optimal washing, do not overload the baskets.

How to use the half load function?

Load only the upper or lower basket, select an appropriate program, then press the Half load button. This reduces water and energy consumption.

What to do in case of water leakage?

Immediately shut off the water supply and unplug the appliance. Check the connections and seals. If the leak comes from inside, contact a technician. The anti-leak system should normally shut off the water automatically.

How to obtain spare parts?

You can order spare parts such as filters, spray arms or baskets from your dealer or on specialized websites. Use the model reference (EMD141BI-V1) for guaranteed compatibility.

What is the noise level of the appliance?

The noise level is 44 dB during normal operation, making it relatively quiet. In quick program, the noise may be slightly higher.

USER MANUAL EMD141BI-V1 EAS Electric

Simple line drawing of a trash bin with crossed lines and a blank rectangular base (no text or symbols)

doméstico.

!

Technical line drawing of a 3D printer with labeled components (no text or symbols present)

Technical line drawing of a mechanical component with multiple slots and mounting holes (no text or symbols)

Technical line drawing of a structural grid framework with no visible text or symbols

Line drawing of a multi-tiered plastic basket structure (no text or symbols)

SAL

Diagram showing a grid of vertical bars with an arrow pointing to the bottom (no text or symbols)

Line drawing of a washing machine with hand pouring liquid into the air (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Diagram of a shopping cart with wheels and an arrow indicating direction (no text or symbols)

Diagram of a car chassis with wheels and a directional arrow indicating motion (no text or symbols)

Diagram of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a mechanical device with a hand adjusting its frame (no text or symbols)

Mechanical device with a hand operating a tool, showing internal components and a magnified inset of the component (no text or symbols)

Isometric line drawing of a mechanical or structural component with no visible text or symbols

→

Pure mechanical diagram of a zigzag spring or frame structure without any text, numbers, or symbols

Technical line drawing of a mechanical cage or rack structure with no visible text or symbols

→

Technical line drawing of a mechanical assembly with no visible text or symbols

Abrir

Filtro grueso Filtro principal Filtro fino

Illustration of hands cleaning a car with a spray gun, showing liquid spray and cleaning components (no text or symbols)

Technical diagram of a mechanical assembly with internal components and directional arrows (no text or symbols)

Technical illustration of an airplane with structural frame and internal components, showing a close-up of the fuselage (no text or symbols present)

Illustration of a hand using a tool to adjust or install a mechanical component inside a tray (no text or symbols visible)

Line drawing of a kitchen sink with a hand cleaning the surface and a spray bottle pouring liquid (no text or symbols)

!

Symbolic illustration of a hand with a lightning bolt and smoke trail (no text or numbers)

[Non-Text]
!
!

Illustration of two different plumbing fixtures: a hand holding a faucet and a tap with a handle (no text or symbols present)

!

φ 40mm

Diagram showing a light bulb and a magnified view of a device with a hand operating it, no text or symbols present.

Line drawing of a simple bench with a grid-patterned backrest and an arrow indicating direction (no text or symbols)

Pure technical line drawing of a mechanical component with no text, numbers, or symbols

!

graph TD
    A["Storage 1"] --> B["Flow Left"]
    B --> C["Flow Right"]
    C --> D["Storage 2"]
    D --> E["Flow Left"]
    E --> F["Flow Right"]
    F --> G["Storage 3"]
    G --> H["Flow Left"]
    H --> I["Flow Right"]
    I --> J["Storage 4"]
    J --> K["Flow Left"]
    K --> L["Storage 5"]
    L --> M["Flow Right"]
    M --> N["Storage 6"]
    N --> O["Flow Left"]
    O --> P["Storage 7"]
    P --> Q["Flow Right"]
    Q --> R["Storage 8"]
    R --> S["Flow Left"]
    S --> T["Storage 9"]
    T --> U["Flow Right"]
    U --> V["Storage 10"]

Simple diagram showing two gray blocks connected by a wavy line with an arrow, no text or symbols present.

Technical line drawing of a door frame assembly with mounting holes and a lid (no text or symbols)

Technical diagram showing a structural assembly with labeled components and an inset detail view of a mechanical component.

Technical line drawing of a door frame with internal components and mounting brackets (no text or symbols)

Technical diagram showing structural components and a magnified detail of a mechanical assembly with labeled parts and an inset detail view.

Line drawing of a washing machine with an inset showing internal components and a screwdriver (no text or symbols)

Technical diagram showing assembly steps of a mechanical device with screw fasteners and mounting components, including directional arrows.

Technical diagram showing exploded view of a washing machine with labeled components and close-ups of internal parts.

	......
	......

Technical line drawing of a mechanical assembly with multiple circular components and spring-like elements (no text or labels)

10 11 7 12 7 8 3 13 14 12 9 6

Technical line drawing of a mechanical or electrical enclosure with internal channels and structural elements (no text or symbols)

Black silhouette of various kitchen utensils arranged in rows with square placeholders below (no text or symbols)

Contenido

Pure diagram of a room interior with a cabinet and pipe system (no text or symbols)

Simple line drawing of a fish being dissolved from a bowl with a magnifying glass (no text or symbols)

Diagram showing a container with vertical bars and an arrow pointing to it, no text or symbols present.

Diagram of a kitchen appliance with a hand inserting into the airway (no text or symbols)

Simple line drawing of a refrigerator with sound waves (no text or symbols)

PROGRAMES ECO 90° 8.8 1/2

	ECO
	90°

Technical line drawing of a mechanical assembly with rollers and housing (no text or symbols)

Pure geometric diagram of vertical planes intersecting a horizontal line, no text or symbols present

Warning sign with warning symbol, grid pattern, and crossed X marks in a circular frame

Blank gray rectangular button with a small circular icon in the top-left corner (no text or symbols)

Simple line drawing of a door with a window and starburst symbol, no text or labels present

Line drawing of a device with a handle inserting into a socket (no text or symbols)

Line drawing of a hand pressing down on a device with a circular button and light rays, indicating a press or control mechanism (no text or symbols present)

Diagram showing three different lighting or radar system configurations with labeled components and light paths

Technical line drawings of a device with internal components and a close-up of its mechanical assembly (no text or symbols)

Diagram of a device with a screen and indicator lights, no text or symbols present

Diagram showing a sequence of icons and symbols, possibly representing a process or system with labeled points.

graph LR
    A["Container with inlet"] --> B["Retraction of vertical bars"]
    B --> C["Extraction of horizontal bars"]
    C --> D["Discharge into water"]

!

Simple line drawing of a box with a lid and a drop, no text or symbols present.

[Non-Text]

Warning symbol with exclamation mark on black background

D1 D2

Solid dark gray image with no visible content, text, or symbols.

Contents

Diagram showing a trash bin symbol with crosshair and minus sign, likely indicating a waste sorting or classification system.

!

Technical line drawing of a 3D printer with labeled components (no text or symbols present)

Technical line drawing of a mechanical component with multiple slots and mounting holes (no text or symbols)

Technical line drawing of a structural grid framework with no visible text or symbols

Line drawing of a multi-tiered plastic basket structure (no text or symbols)

SAL

Diagram showing a grid of vertical bars with an arrow pointing to the bottom (no text or symbols)

Line drawing of a kitchen appliance with a hand pouring liquid from a bottle into a sink (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Diagram of a shopping cart with wheels and an arrow indicating direction (no text or symbols)

Diagram of a car chassis with wheels and a directional arrow indicating motion (no text or symbols)

Diagram of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a mechanical device with a hand adjusting its frame (no text or symbols)

Mechanical device with gear mesh and a hand holding a tool, shown in a technical diagram (no text or symbols)

Isometric line drawing of a mechanical or structural component with no visible text or symbols

→

Pure mechanical diagram of a zigzag spring or frame structure without any text, numbers, or symbols

Technical line drawing of a mechanical assembly with no visible text or symbols

→

Technical line drawing of a mechanical assembly with no visible text or symbols

Technical diagram of a mechanical component with labeled 'Open' and directional arrows indicating internal flow (no text or symbols beyond label)

Coarse filter Main filter Fine filter

Illustration of hands cleaning a car with a spray gun, showing liquid spray and cleaning components (no text or symbols)

Technical diagram of a mechanical component with an inset close-up showing internal components (no text or symbols)

Technical illustration of an airplane with structural frame and internal components, showing a close-up of the fuselage (no text or symbols present)

Illustration of a hand using a tool to adjust or install a mechanical component inside a tray (no text or symbols visible)

Illustration of hands using a spray gun to clean or wash a small object on a kitchen sink (no text or symbols)

!

Symbolic illustration of a hand with a lightning bolt and smoke trail (no text or numbers)

!
!
!

Illustration of two different plumbing fixtures: a hand holding a faucet and a tap wrench (no text or symbols present)

!

φ 40mm

Diagram showing a light bulb and a magnified view of a device with a hand operating it, no text or symbols present.

Line drawing of a simple kitchen sink with a grid-patterned wall and an arrow indicating a directional flow (no text or symbols)

Simple line drawing of a cabinet or enclosure with arrows indicating direction (no text or symbols)

!

graph TD
    A["Storage 1"] --> B["Flow Left"]
    B --> C["Flow Right"]
    C --> D["Storage 2"]
    D --> E["Flow Left"]
    E --> F["Flow Right"]
    F --> G["Storage 3"]
    G --> H["Flow Left"]
    H --> I["Flow Right"]
    I --> J["Storage 4"]
    J --> K["Flow Left"]
    K --> L["Storage 5"]
    L --> M["Flow Right"]
    M --> N["Storage 6"]
    N --> O["Flow Left"]
    O --> P["Storage 7"]
    P --> Q["Flow Right"]
    Q --> R["Storage 8"]
    R --> S["Flow Left"]
    S --> T["Storage 9"]
    T --> U["Flow Right"]
    U --> V["Storage 10"]

Simple diagram showing two gray blocks connected by a line with an upward arrow and wavy base (no text or symbols)

Technical line drawing of a door frame assembly with mounting holes and a lid (no text or symbols)

Technical diagram showing a structural assembly with labeled components and an inset detail view of a mechanical component.

Technical line drawing of a door frame with internal components and mounting brackets (no text or symbols)

Technical diagram showing structural components and a magnified detail of a mechanical assembly with labeled parts and an inset detail view.

Line drawing of a washing machine with an inset showing a mechanical assembly (no text or symbols)

Technical diagram showing assembly steps of a door panel with screwdriver and bolt, including mounting and locking instructions.

Technical diagram showing exploded view of a washing machine with labeled components and close-ups of internal parts.

	......
	......

Technical line drawing of a mechanical assembly with springs, gears, and housing (no text or symbols)

10 11 7 12 7 8 3 13 14 12 9 6

Technical line drawing of a mechanical ventilation system with fan and vent vane (no text or labels)

Black silhouette of various kitchen utensils arranged in rows with square placeholders below (no text or symbols)

Contents

Pure diagram of a room interior with a cabinet and pipe system (no text or symbols)

Simple line drawing of a fish being dissolved from a bowl with a magnifying glass (no text or symbols)

Diagram showing a container with vertical bars and an arrow pointing to it, no text or symbols present.

Diagram of a kitchen appliance with a hand inserting into the airway (no text or symbols)

Simple line drawing of a refrigerator with sound waves (no text or symbols)

PROGRAMES P ECO 90° 8.8 1/2 $

	[55KT]

Technical line drawing of a mechanical assembly with rollers and housing (no text or symbols)

Pure geometric diagram of vertical planes intersecting a horizontal line, without any text, numbers, or symbols.

Warning sign with warning symbol, grid pattern, and crossed X marks in a circular frame

Blank gray rectangular button with a circular icon in the top-left corner (no text or symbols)

Line drawing of a door with a window and starburst symbol, no text or labels present

Line drawing of a device with a handle inserting into a chamber, showing internal components and no text or symbols.

Line drawing of a hand pressing down on a device with a circular button and light rays, indicating a press or control mechanism (no text or symbols present)

Diagram showing three different lighting or radar system configurations with labeled components and light paths

Technical line drawings of a device with powder being poured into a chamber and then into a base, showing internal components (no text or symbols)

Simple line drawing of a device with a screen and indicator lights, no text or symbols present.

	—	●
	—	●
ECO	—	●
	—	●
	—	●
90'	—	●
	—	○

graph LR
    A["Container with lid"] --> B["Finger with index finger"]
    B --> C["ECO Control Panel with icons for hand, cup, and monitor"]

graph LR
    A["Hand turning in container"] --> B["Bar chart adjustment"]
    B --> C["Final packaging with rotation arrow"]

Simple line drawing of a box with a warning sign above it (no text or symbols on the box itself)

D1 D2

Contenu

Symbol of a trash bin crossed out by two diagonal lines (no text or labels)

!

Technical line drawing of a 3D printer with labeled components (no text or symbols present)

Technical line drawing of a mechanical roller or conveyor system (no text or symbols)

3D wireframe model of a mechanical housing or enclosure with internal grid lines and mounting points (no text or symbols)

Line drawing of a wire mesh basket with multiple compartments and handles (no text or symbols)

SAL

Diagram showing a grid of vertical bars with an arrow pointing to the bottom (no text or symbols)

Line drawing of a kitchen appliance with a hand pouring liquid from a bottle into a sink (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Diagram of a shopping cart with wheels and an arrow indicating direction (no text or symbols)

Diagram of a car chassis with wheels and a directional arrow indicating motion (no text or symbols)

Diagram of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a mechanical cage or rack structure with a hand adjusting it (no text or symbols)

Diagram of a mechanical device with a hand operating a tool, showing internal components and a magnified view (no text or symbols)

Isometric line drawing of a mechanical or structural component with no visible text, numbers, or symbols.

→

Pure mechanical diagram of a zigzag structure with circular loops, no text or symbols present

Technical line drawing of a mechanical assembly with no visible text or symbols

→

Technical line drawing of a mechanical assembly with no visible text or symbols

Ouvrir

Illustration of hands cleaning a car with a spray gun, showing liquid spray and cleaning components (no text or symbols)

Technical diagram of a mechanical assembly with internal components and directional arrows (no text or symbols)

Technical illustration of an airplane with structural frame and internal components, showing a close-up of the fuselage (no text or symbols present)

Illustration of a hand using a propeller to lift a small fan inside a tray (no text or symbols)

Illustration of hands using a spray gun to clean a small aircraft on a kitchen sink (no text or symbols)

!

Symbolic illustration of a hand with a lightning bolt and smoke trail (no text or numbers)

!
!
!

Illustration of two different plumbing fixtures: a hand holding a faucet and a tap with a handle (no text or symbols present)

!

φ 40mm

Line drawing of a minimalist kitchen sink with a grid-patterned wall and side table (no text or symbols)

Simple line drawing of a cabinet or enclosure with arrows indicating direction (no text or symbols)

!

graph TD
    A["Storage 1"] --> B["Flow Left"]
    B --> C["Flow Right"]
    C --> D["Storage 2"]
    D --> E["Flow Left"]
    E --> F["Flow Right"]
    F --> G["Storage 3"]
    G --> H["Flow Left"]
    H --> I["Flow Right"]
    I --> J["Storage 4"]
    J --> K["Flow Left"]
    K --> L["Storage 5"]
    L --> M["Flow Right"]
    M --> N["Storage 6"]
    N --> O["Flow Left"]
    O --> P["Storage 7"]
    P --> Q["Flow Right"]
    Q --> R["Storage 8"]
    R --> S["Flow Left"]
    S --> T["Storage 9"]
    T --> U["Flow Right"]
    U --> V["Storage 10"]

Simple diagram showing two gray blocks connected by a wavy line with an arrow, no text or symbols present.

Technical line drawing of a door frame assembly with mounting holes and a lid (no text or symbols)

Technical diagram showing a structural assembly with labeled components and an inset detail view of a mechanical component.

Technical line drawing of a door frame with internal components and mounting brackets (no text or symbols)

Technical diagram showing a structural frame assembly with labeled components and an inset close-up of a mechanical component detail.

Line drawing of a washing machine with an inset showing a screwdriver inserted into the housing (no text or symbols present)

Technical diagram showing installation steps of a wall-mounted device with screwdriver and bolt components, including mounting and mounting details.

Technical diagram showing exploded view of a washing machine with labeled components and close-ups of the internal structure.

	......
	......

SELON LA NORME EN60436:

Technical line drawing of a mechanical or electrical enclosure with internal channels and structural elements (no text or symbols)

Black silhouette of various kitchen utensils arranged in rows with square placeholders below (no text or symbols)

Contenu

Pure diagram of a horizontal pipe system with a container and tubing, no text or symbols present

Simple line drawing of a fish being dissolved from a bowl with a magnifying glass (no text or symbols)

Diagram showing a container with vertical bars and an arrow pointing to it, no text or symbols present.

Diagram of a kitchen appliance with a hand inserting a bag into the airway (no text or symbols)

Simple line drawing of a refrigerator with sound waves (no text or symbols)

PROGRAMES 8.8 ½

	ECO
	90'

Simple warning icon with exclamation mark and thermometer symbol (no text or labels)

Technical line drawing of a mechanical assembly with rollers and brackets (no text or symbols)

Pure geometric line drawing of a vertical structure with parallel planes, no text or symbols present

Warning sign with warning symbol, circular grid pattern, and crossed X marks

Blank gray rectangular button with a small circular icon in the top-left corner (no text or symbols)

Simple line drawing of a door with a window and starburst symbol, no text or labels present

Line drawing of a device with a handle inserting into a chamber, showing internal components and no text or symbols.

Line drawing of a hand pressing down on a device with a circular button and light rays, indicating a press or control mechanism (no text or symbols present)

Diagram showing three different lighting or radar system configurations with labeled components and light paths

Technical line drawings of a device with internal components and a close-up of its mechanical assembly (no text or symbols)

Simple line drawing of a device with a screen and indicator lights, no text or symbols present.

Diagram showing horizontal lines with icons and dots, likely representing a conceptual or educational layout.

graph LR
    A["Coffee Cup"] --> B["Hand Gesture"]
    B --> C["ECO"]

Simple line drawing of a container with a hand inserting a plug into the liquid, no text or symbols present.

→

Illustration of a hand holding a bar chart with an arrow pointing downward (no text or symbols)

→

Simple line drawing of a box with a minus sign and a curved arrow, no text or symbols present.

!

Simple line drawing of a box with a lid and smoke, no text or symbols present.

[Non-Text]

!

Empty rectangular frame with black border and top margin (no text or symbols)

D1 D2

Solid dark gray rectangle with no visible text, symbols, or features.

Conteúdo

!

Image containing a simple diagram with a trash bin and crossed-out lines, likely indicating a waste sorting or recycling symbol.

!

Simple line drawing of a funnel pouring liquid into a container (no text or symbols)

Diagram showing a grid of vertical bars with an arrow pointing to the bottom right (no text or symbols)

Line drawing of a kitchen appliance with a hand pouring liquid from a pan into a sink (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Diagram of a shopping cart with wheels and an arrow indicating direction (no text or symbols)

Diagram of a car chassis with wheels and a directional arrow indicating motion (no text or symbols)

Diagram of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a mechanical device with a hand adjusting its frame (no text or symbols)

Mechanical device with gear mesh and hand tool interacting, no visible text or symbols

Isometric line drawing of a mechanical or structural component with no visible text, numbers, or symbols.

→

Pure mechanical diagram of a zigzag spring or chain structure without any text, numbers, or symbols

Technical line drawing of a mechanical assembly with no visible text or symbols

→

Technical line drawing of a mechanical assembly with no visible text or symbols

Abrir

Filtro grueso Filtro principal Filtro fino

Illustration of hands cleaning a car with a spray gun, showing liquid spray and cleaning components (no text or symbols)

Technical diagram of a mechanical assembly with internal components and directional arrows (no text or symbols)

Technical illustration of an airplane with structural frame and internal components, showing a close-up of the fuselage (no text or symbols present)

Illustration of a hand using a tool to adjust or install a mechanical component inside a tray (no text or symbols visible)

Illustration of a kitchen sink with a hand cleaning the surface using a tool (no text or symbols present)

Warning sign with hand icon and warning labels, likely from a safety or hazard prevention document

Illustration of two different plumbing fixtures: a hand holding a faucet and a tap with a handle (no text or symbols present)

!

!

φ 40mm

Line drawing of a minimalist kitchen sink with a grid-patterned wall and side table (no text or symbols)

Simple line drawing of a cabinet or enclosure with arrows indicating direction (no text or symbols)

!

graph TD
    A["Storage 1"] --> B["Flow Left"]
    B --> C["Flow Right"]
    C --> D["Storage 2"]
    D --> E["Flow Left"]
    E --> F["Flow Right"]
    F --> G["Storage 3"]
    G --> H["Flow Left"]
    H --> I["Flow Right"]
    I --> J["Storage 4"]
    J --> K["Flow Left"]
    K --> L["Storage 5"]
    L --> M["Flow Right"]
    M --> N["Storage 6"]
    N --> O["Flow Left"]
    O --> P["Storage 7"]
    P --> Q["Flow Right"]
    Q --> R["Storage 8"]
    R --> S["Flow Left"]
    S --> T["Storage 9"]
    T --> U["Flow Right"]
    U --> V["Storage 10"]

Simple diagram showing two gray blocks connected by a wavy line with an arrow, no text or symbols present.

Technical line drawing of a door frame assembly with mounting holes and a side panel (no text or symbols)

Technical diagram showing a structural assembly with labeled components and an inset detail view of a mechanical component.

Technical line drawing of a door frame with internal components and mounting brackets (no text or symbols)

Technical diagram showing a structural frame assembly with labeled components and an inset close-up of a mechanical component detail.

Line drawing of a washing machine with an inset showing internal components and a screwdriver (no text or symbols)

Technical diagram showing assembly steps of a door panel with screw fasteners and mounting bracket, including directional arrows for fastening.

Technical diagram showing exploded view of a washing machine with labeled components and close-ups of internal parts.

	......
	......

Technical line drawing of a mechanical assembly with springs, gears, and housing (no text or symbols)

10 11 7 12 7 8 3 13 14 12 9 6

Technical line drawing of a mechanical or electrical enclosure with internal channels and structural elements (no text or symbols)

Black silhouette of various kitchen utensils arranged in rows with square placeholders below (no text or symbols)

Diagram showing two views of a grid-patterned container with an arrow indicating rotation (no text or symbols)

Two-step diagram showing a grid-patterned container being processed, with an arrow indicating the process (no text or symbols present)

Diagram showing two views of a grid-patterned container or rack structure, with an arrow indicating direction (no text or symbols present)

Two-step diagram showing structural rearrangement of a grid-patterned structure, no text or symbols present

Conteúdo

Pure diagram of a room interior with a cabinet and pipe system (no text or symbols)

Simple line drawing of a mechanical or electrical component with a hammer, screw, and droplet on a surface (no text or symbols)

Diagram showing a container with vertical bars and an arrow indicating direction (no text or symbols)

Line drawing of a kitchen appliance with a hand inserting a plug into the interior (no text or symbols)

Simple line drawing of a refrigerator with sound waves (no text or symbols)

PROGRAMES 8.8 ECO 90° 1/2

Technical line drawing of a mechanical component with gears and shafts (no text or symbols)

Pure geometric line drawing of a vertical structure with parallel planes, no text or symbols present

Warning sign with warning symbol, grid pattern, and crossed X marks in a circular frame

Blank gray rectangular button with a circular icon in the top-left corner (no text or symbols)

Simple line drawing of a door with a window and starburst symbol, no text or labels present

Line drawing of a device with a handle inserting into a chamber, showing internal components and no text or symbols.

Line drawing of a hand pressing down on a device with a circular button and light rays, indicating a press or control mechanism (no text or symbols present)

Diagram showing three different lighting or radar system configurations with labeled components and light paths

Technical line drawings of a device with internal components and a close-up of its mechanical assembly (no text or symbols)

Simple line drawing of a device with a screen and indicator lights, no text or symbols present.

	—	●
	—	●
ECO	—	●
	—	●
	—	●
90'	—	●
	—	○

graph LR
    A["Coffee Cup"] --> B["Finger"]
    B --> C["ECO"]

graph LR
    A["Hand cleaning"] --> B["Recycling"]
    B --> C["Washing machine"]

!

Simple line drawing of a box with a lid and a drop, no text or symbols present.

[Non-Text]

Warning symbol with exclamation mark inside a black rectangle

D1 D2

Solid dark gray image with no visible content, text, or symbols.

CONDIÇÕES DA GARANTIA

Scan for manual in other languages and further updates: