EMD09X2-V1 - Dishwasher EAS Electric - Free user manual and instructions

Product type	Built-in dishwasher
Model	EMD09X2-V1
Brand	EAS Electric
Capacity	9 place settings
Energy class	A+
Water consumption	9.5 L per cycle
Electrical consumption	0.9 kWh per cycle
Noise level	46 dB(A)
Number of programs	6
Dimensions (W x H x D)	45 x 85 x 60 cm
Net weight	35 kg
Power supply	220-240 V ~ 50 Hz
Maximum current	10 A
Installation type	Built-in
Drum material	Stainless steel
Cutlery basket	Yes
Delay start	Yes (3h/6h/9h)
Filters	Main filter, fine filter, strainer for large objects
Filter cleaning	Recommended after each cycle
Safety	Child lock, anti-flood protection
Spare parts	Available, see manual

Frequently Asked Questions - EMD09X2-V1 EAS Electric

How to install the EAS Electric EMD09X2-V1 dishwasher?

Installation must be carried out by a qualified professional. Ensure the appliance is level and that water and electrical connections comply. Refer to the installation manual provided.

What to do if the appliance does not start?

Check that the door is properly closed, the power supply is connected, and the circuit breaker has not tripped. Also ensure the program is correctly selected.

How to clean the dishwasher filters?

Remove the lower basket, unscrew the main filter and fine filter. Rinse them under running water to remove residues. Use a soft brush if necessary. Replace them correctly to avoid blockages.

Why are there residues on the dishes after washing?

This may be due to a poorly adjusted detergent dispenser, overcrowded dishes, or a dirty filter. Use the intensive program for heavily soiled loads and check the detergent amount.

What does error code E1 on the appliance mean?

Code E1 indicates a drain problem. Check that the drain hose is not kinked or clogged, and that the filter is not obstructed. If the problem persists, contact customer service.

How to use the regenerating salt?

Open the cap of the salt reservoir (located under the lower basket). Fill it with water then add regenerating salt specifically for dishwashers. Close tightly and run an empty cycle.

Can aluminum pans be washed in this dishwasher?

No, aluminum can discolor or pit when in contact with alkaline detergents. It is best to wash these items by hand. Refer to the manual for a list of compatible materials.

How to maintain the drain pump?

Unplug the appliance, remove the filters, and check the pump located at the bottom of the tub. Remove any debris. Clean it regularly to avoid odors and blockages.

What is the maximum capacity of the EMD09X2-V1?

The capacity is 9 place settings. Do not overload the baskets to ensure effective washing. Follow loading instructions in the manual.

The appliance is noisy, what to do?

Check that the appliance is level and not touching surrounding cabinets. Ensure the dishes are properly placed and that the wash arms are not blocked.

USER MANUAL EMD09X2-V1 EAS Electric

Abstract arrangement of gray and white triangular shapes pointing right (no text or symbols)

LAVAVAJILLAS

Empty rectangular frame with a single horizontal line at the top (no text or symbols)

EMD09X2-V1 EMD09W2-V1

Contenido

Simple line drawing of a trash bin with crossed lines and a blank rectangular base (no text or symbols)

doméstico.

!

Technical line drawing of a 3D printer or printer with internal components and mounting base (no text or symbols)

Line drawing of a woven basket with a handle and grid pattern (no text or symbols)

Technical line drawing of a mechanical assembly with grid-like components and mounting holes (no text or symbols)

Technical line drawing of a multi-tiered mechanical cage or rack structure (no text or symbols)

SAL

Diagram showing a grid of vertical bars with an arrow pointing to the bottom (no text or symbols)

Line drawing of a washing machine with hand pouring liquid into the air (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Diagram of a car pulling wheels into a storage tank (no text or symbols)

Diagram of a car chassis with wheels and a directional arrow indicating motion (no text or symbols)

Diagram of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a mechanical device with a hand adjusting its frame (no text or symbols)

Mechanical device with gear mesh and a hand holding a tool, shown in a technical diagram (no text or symbols)

Isometric line drawing of a mechanical or structural component with no visible text or symbols

→

Pure mechanical linkage diagram without any text, numbers, or symbols

Technical line drawing of a car chassis with visible structural ribs and wheels (no text or symbols)

→

Line drawing of a car chassis with wheels and structural grid lines (no text or symbols)

Abrir

Filtro grueso Filtro principal Filtro fino

Illustration of hands cleaning a car with a spray gun, showing liquid spray and cleaning components (no text or symbols)

Technical diagram of a mechanical component with an inset close-up showing internal structure (no text or symbols)

Technical illustration of an airplane with structural frame and internal components, showing a close-up of the fuselage (no text or symbols present)

Illustration of a hand using a tool to adjust or install a mechanical component inside a tray (no text or symbols visible)

Illustration of hands using a spray gun to clean or wash a small object on a kitchen sink (no text or symbols)

!

Symbolic illustration of a hand with a lightning bolt and serrated line, representing electrical hazard or electrical contact (no text present)

[Non-Text]
!
!

Illustration of two different plumbing fixtures: a hand holding a faucet and a tap with a handle (no text or symbols present)

!

φ 40mm

Diagram showing a light bulb and a magnified view of a device with a hand operating it, no text or symbols present.

Line drawing of a simple bench with a grid-patterned backrest and an arrow indicating direction (no text or symbols)

Simple line drawing of a cabinet or enclosure with arrows indicating direction (no text or symbols)

!

graph TD
    A["Storage 1"] --> B["Flow Left"]
    C["Storage 2"] --> D["Flow Right"]
    B --> E["Central Structure"]
    D --> E
    E --> F["External Connection"]
    style A fill:#f9f,stroke:#333
    style C fill:#f9f,stroke:#333
    style E fill:#ccf,stroke:#333

Simple diagram showing two gray blocks connected by a wavy line with an arrow, no text or symbols present.

Technical line drawing of a door frame assembly with mounting holes and a side panel (no text or symbols)

Technical diagram showing a structural assembly with labeled components and an inset detail view of a mechanical component.

Technical line drawing of a door frame with internal components and mounting brackets (no text or symbols)

Technical diagram showing structural components and a magnified detail of a mechanical assembly with labeled parts and an inset detail view.

Line drawing of a washing machine with an inset showing internal components and a screwdriver (no text or symbols)

Technical diagram showing assembly steps of a mechanical device with screw fasteners and mounting components, including directional arrows.

Technical diagram showing exploded view of a washing machine with labeled components and close-ups of internal parts.

		100%
100%	100%	100%
100%	100%	100%
100%	100%	100%
100%	100%	100%
100%	100%	100%
100%	100%	100%
100%	1.5%	1.5%
1.5%	1.5%	1.5%
1.5%	1.5%	1.5%
1.5%	1.5%	1.5%
1.5%	1.5%	1.5%
1.5%	1.5%	1.5%
1.5%	1.5%	1.5%
2.5%	2.5%	2.5%
2.5%	2.5%	2.5%
2.5%	2.5%	2.5%
2.5%	2.5%	2.5%
2.5%	2.5%	2.5%
2.5%	2.5%	2.5%
2.5%	2.5%, 3.5%, 4.5%, 6.5%, 8.5%, 10.5%, 12.5%, 14.5%, 16.5%, 18.5%, 20.5%, 22.5%, 24.5%, 26.5%, 28.5%, 30.5%, 32.5%, 34.5%, 36.5%, 38.5%, 40.5%, 42.5%, 44.5%, 46.5%, 48.5%, 50.5%, 52.5%, 54.5%, 56.5%, 58.5%, 60.5%, 62.5%, 64.5%, 66.5%, 68.5%, 70.5%, 72.5%, 74.5%, 76.5%, 78.5%, 80.5%, 82.5%, 84.5%, 86.5%, 88.5%, 90.5%, 92.5%, 94.5%, 96.5%, 98.5%, 100%.

	......
	......

Line drawing of a metal rack containing various plastic cups and containers (no text or symbols)

Technical line drawing of a mechanical fan or air duct system with internal components and ventilation grilles (no text or labels)

Technical line drawing of a mechanical or electrical component with internal channels and mounting points (no text or symbols)

Diagram of a rectangular container with multiple oval shapes arranged in rows, one central vertical bar, and an arrow pointing right (no text or symbols)

Black silhouette of various kitchen utensils and a spoon arranged in rows with square placeholders below (no text or symbols)

Contenido

Pure diagram of a room interior with a cabinet and pipe system (no text or symbols)

Simple line drawing of a mechanical or electrical component with a hammer, screw, and droplet on a surface (no text or symbols)

Diagram showing a container with vertical bars and an arrow indicating direction (no text or symbols)

Diagram of a kitchen appliance with a hand inserting into the airway (no text or symbols)

Simple line drawing of a refrigerator with sound waves (no text or symbols)

Intensive ECO | ECO 90° | 90 mins Rapid P ½ ▶II

	[256Z]
ECO

Technical line drawing of a mechanical assembly with rollers and housing (no text or symbols)

Pure diagram of vertical panels arranged in a grid pattern without any text, numbers, or symbols

Warning sign with warning symbol, circular grid pattern, and crossed X marks

Blank gray rectangular button with a small circular icon in the top-left corner (no text or symbols)

!

!

Line drawing of a door with a window and indicator lights, showing a right-hand rule for change (no text or symbols)

Line drawing of a hand inserting a device into a device with a screen and plug (no text or symbols)

Line drawing of a hand pressing down on a device with a scroll arrow indicating rotation (no text or symbols)

Diagram showing three different lighting or radar system configurations with labeled components and light paths

Technical line drawings of a device with powder being poured into a chamber and then into a base, showing internal components (no text or symbols)

Simple line drawing of a device with a screen and indicator lights (no text or symbols)

Diagram showing four labeled symbols: a bowl, an icon, an ECO, and a 90° symbol with a dot.

graph LR
    A["Hand gesture"] --> B["Hand gesture"]
    B --> C["ECO icon with coffee cup"]
    C --> D["Hand gesture"]

graph LR
    A["Foot Contact"] --> B["Brushing Box"]
    B --> C["Drinking Bar"]
    C --> D["Box with Down Arrow"]
    D --> E["Bottle with Top Cover"]

Simple line drawing of a bucket with a warning sign above it (no text or symbols on the bucket itself)

[Non-Text]

Warning symbol with exclamation mark inside a black rectangle

D1 D2

Solid dark gray image with no visible content, text, or symbols.

CONDICIONES DE LA GARANTÍA

Diagram showing a trash bin symbol with crosshair and minus sign, likely indicating a waste sorting or classification system.

!

Technical line drawing of a 3D printer or printer with internal components and mounting base (no text or symbols)

Line drawing of a woven basket with a handle and grid pattern (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Technical line drawing of a multi-tiered mechanical cage or rack structure (no text or symbols)

SAL

Diagram showing a grid of vertical bars with an arrow pointing to the bottom (no text or symbols)

Line drawing of a washing machine with hand pouring liquid into the air (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Diagram of a shopping cart with wheels and an arrow indicating direction (no text or symbols)

Diagram of a car chassis with wheels and a directional arrow indicating motion (no text or symbols)

Diagram of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a mechanical device with a hand adjusting its frame (no text or symbols)

Mechanical device with gear mesh and a hand operating a tool, shown with an inset magnified view of the component (no text or symbols)

Isometric line drawing of a mechanical or structural component with no visible text or symbols

→

Pure mechanical linkage diagram without any text, numbers, or symbols

Line drawing of a car chassis with visible structural ribs and wheels (no text or symbols)

→

Line drawing of a car chassis frame with no text or symbols

Technical diagram of a device casing with internal components and directional arrows, labeled 'Open' (no text or symbols on the diagram itself)

Coarse filter Main filter Fine filter

Illustration of hands cleaning a car with a spray gun, showing liquid spray and cleaning components (no text or symbols)

Technical diagram of a mechanical component with an inset close-up showing internal components (no text or symbols)

Technical illustration of an airplane with structural frame and internal components, showing a close-up of the fuselage (no text or symbols present)

Illustration of a hand using a tool to adjust or install a mechanical component inside a tray (no text or symbols visible)

Line drawing of a kitchen sink with a hand cleaning the surface and a spray bottle pouring liquid (no text or symbols)

!

Symbolic illustration of a hand with a lightning bolt and smoke trail (no text or numbers)

!
!
!

Illustration of two different plumbing fixtures: a hand holding a faucet and a tap wrench (no text or symbols present)

!

φ 40mm

Diagram showing a light bulb and a magnified view of a device with a hand operating it, no text or symbols present.

Line drawing of a simple kitchen sink with a grid-patterned wall and an arrow indicating a directional flow (no text or symbols)

Pure technical line drawing of a mechanical component with no text, numbers, or symbols

!

graph TD
    A["Storage 1"] --> B["Flow Left"]
    B --> C["Flow Right"]
    C --> D["Storage 2"]
    D --> E["Flow Left"]
    E --> F["Flow Right"]
    F --> G["Storage 3"]
    G --> H["Flow Left"]
    H --> I["Flow Right"]
    I --> J["Storage 4"]
    J --> K["Flow Left"]
    K --> L["Storage 5"]
    L --> M["Flow Right"]
    M --> N["Storage 6"]
    N --> O["Flow Left"]
    O --> P["Storage 7"]
    P --> Q["Flow Right"]
    Q --> R["Storage 8"]
    R --> S["Flow Left"]
    S --> T["Storage 9"]
    T --> U["Flow Right"]
    U --> V["Storage 10"]

Simple diagram showing two gray blocks connected by a wavy line with an arrow, no text or symbols present.

Technical line drawing of a door frame assembly with mounting holes and a side panel (no text or symbols)

Technical diagram showing a structural assembly with labeled components and an inset detail view of a mechanical component.

Technical line drawing of a door frame with internal components and mounting brackets (no text or symbols)

Technical diagram showing structural components and a magnified detail of a mechanical assembly with labeled parts and an inset detail view.

Line drawing of a washing machine with an inset showing internal components and a screwdriver (no text or symbols)

Technical diagram showing installation steps of a mechanical device with screw fasteners and mounting components

Technical diagram showing exploded view of a washing machine with labeled components and close-ups of internal parts.

	......
	......

Line drawing of a metal rack with multiple circular and cylindrical objects arranged in a grid (no text or symbols)

Technical line drawing of a mechanical or electrical component with internal fan-like structures and no visible text or symbols

Technical diagram of a multi-layered electrical or mechanical device with labeled components and connections

Diagram of a rectangular container with internal oval patterns and a central vertical bar, no text or symbols present.

Black silhouette of various kitchen utensils arranged in rows with square placeholders below (no text or symbols)

Contents

Pure diagram of a room interior with a cabinet and pipe system (no text or symbols)

Simple line drawing of a mechanical or electrical component with a hammer, screw, and droplet on a surface (no text or symbols)

Diagram showing a container with vertical bars and an arrow indicating direction (no text or symbols)

Diagram of a kitchen appliance with a hand inserting into the airway (no text or symbols)

Simple line drawing of a refrigerator with sound waves (no text or symbols)

Control panel interface with icons, labels, and status indicators including ECO, 90 mins, Rapid, Intensive, and 1/2.

	*	*

	ECO

Technical line drawing of a mechanical assembly with rollers and housing (no text or symbols)

Pure geometric diagram of vertical planes intersecting a horizontal line, no text or symbols present

Warning sign with warning symbol, grid pattern, and crossed X marks inside a rectangular frame

Blank gray rectangular button with a circular icon in the top-left corner (no text or symbols)

Simple line drawing of a door with a window and starburst symbol, no text or labels present

Line drawing of a hand inserting a device into a device with a lamp and screen (no text or symbols)

Line drawing of a hand pressing down on a device with a scroll icon and rotation arrow (no text or symbols)

Diagram showing three different lighting or radar system configurations with labeled components and light paths

Technical line drawings of a device with powder being poured into a chamber and then into a base, showing internal components (no text or symbols)

Simple line drawing of a device with a screen and indicator lights, no text or symbols present.

ECO

graph LR
    A["Hand gesture"] --> B["Hand gesture"]
    B --> C["ECO icon with coffee cup"]
    C --> D["Hand gesture"]

graph LR
    A["Handwashing"] --> B["Toile with a hand gesture"]
    B --> C["Toile with a hand gesture, down arrow"]
    C --> D["Toile with a hand gesture, down arrow, down arrow"]
    D --> E["Toile with a hand gesture, down arrow, down arrow"]
    E --> F["Toile with a hand gesture, down arrow, down arrow"]

Warning sign with exclamation mark and bucket icon, likely indicating a hazard or alert related to waste management

D1 D2

This appliance is guaranteed for three years from the date of sale against all manufacturing defects, including labour and spare parts. In order to justify the date of purchase, it will be compulsory to present the invoice or purchase receipt. The conditions of this warranty apply only to Spain and Portugal. If you have purchased this product in another country, please consult your distributor for the applicable conditions.

1. Remote controls, drain intake rubbers, dockings and door seals, weather stripping.
2. Damage to enamels, paints, nickel plating, chrome plating, oxidation or other types of aesthetic parts or components that do not affect the internal functioning of the appliance.
3. Damage to wear parts due to use, corrosion or oxidation, whether caused by normal use of the appliance or accelerated deterioration due to unfavorable environmental or climatic circumstances. Not suitable for outdoor use.
4. Damage to fragile pieces of glass, glass ceramic, plastics, handles, baskets, doors or light bulbs when their failure or breakage is not attributable to a manufacturing defect.
5. Faults produced by fortuitous causes or accidents of force majeure, or as a consequence of abnormal, negligent or inappropriate use of the device.
6. Civil liabilities of any nature.
7. Consequential damage to the appliance as long as it has not been caused by an internal malfunction.
8. Maintenance or upkeep of the appliance: periodic reviews, adjustments and greases.
9. Faults that accessories and complements, adapters, external cables, bags, spare parts of all kinds, lamps, as well as any part considered consumable by the manufacturer, may suffer.
10. Faults caused by incorrect or illegal installation, inadequate ventilation, lack of ground-ing in the home, power disturbances, inappropriate modifications or use of non-original spare parts.
11. Appliances used in industrial applications or for commercial purposes.
12. Appliances with illegible or altered serial number.
13. Defects or breakdowns produced as a result of fixes, repairs, modifications, or disassembly of the installation of the device by the user or by a technician not authorized by the manufacturer, or as a result of manifest non-compliance with the manufacturer's instructions for use and maintenance.
14. During the warranty period it is essential to keep all manuals together with the equipment. If the equipment is sold, donated or given away, the manual and all related documents must be given to the new user. If any of these are lost, their replacement cannot be claimed.
15. Faults that have their origin or are a direct or indirect consequence of: contact with liquids, chemicals and other substances, as well as conditions derived from the climate or the environment: earthquakes, fires, floods, excessive heat or any other external force, such as insects, rodents and other animals that may have access to the interior of the machine or its connection points.
16. Damages derived from terrorism, riot or popular tumult, legal or illegal demonstrations and strikes; facts of actions of the Armed Forces or the State Security Forces in times of peace; armed conflicts and acts of war (declared or not); nuclear reaction or radiation or radioactive contamination; vice or defect of the goods; facts classified by the Government of the Nation as "national catastrophe or calamity".

Contenu

Symbol of a trash bin crossed out by two diagonal lines (no text or labels)

!

Technical line drawing of a 3D printer or scanner device with mounting base and internal components (no text or symbols)

Line drawing of a woven basket with a handle and grid pattern (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Technical line drawing of a multi-tiered plastic container or rack structure (no text or symbols)

SAL

Diagram showing a grid of vertical bars with an arrow pointing to the bottom (no text or symbols)

Line drawing of a washing machine with hand pouring liquid into the air (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a shopping cart with wheels and an arrow indicating direction (no text or symbols)

Diagram of a car chassis with wheels and a directional arrow indicating motion (no text or symbols)

Diagram of a car storage unit with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a mechanical cage or rack structure with a hand adjusting it (no text or symbols)

Mechanical device with a hand operating a tool, showing internal components and a magnified view of the handle (no text or symbols present)

Isometric line drawing of a mechanical or structural component with no visible text or symbols

→

Pure mechanical diagram of a zigzag spring or frame structure without any text, numbers, or symbols

Technical line drawing of a car chassis with visible structural ribs and wheels (no text or symbols)

→

Line drawing of a car chassis frame with wheels and structural ribs (no text or symbols)

Ouvrir

Illustration of hands cleaning a car with a spray gun, showing liquid spray and cleaning components (no text or symbols)

Technical diagram of a mechanical component with an inset close-up showing internal components (no text or symbols)

Technical illustration of an airplane with structural frame and internal components, showing a close-up of the fuselage (no text or symbols present)

Illustration of a hand using a tool to adjust or install a mechanical component inside a tray (no text or symbols visible)

Line drawing of a kitchen sink with a hand cleaning the surface using a tool (no text or symbols)

!

Silhouette of a hand with a lightning bolt symbol, no text or numbers present

[Non-Text]
!
[NO TEXT]

Illustration of two different plumbing fixtures: a hand holding a faucet and a tap with a handle (no text or symbols present)

!

φ 40mm

Line drawing of a minimalist kitchen sink with a grid-patterned wall and side table (no text or symbols)

Pure technical line drawing of a mechanical component with no text, numbers, or symbols

!

graph TD
    A["Storage 1"] --> B["Flow Left"]
    B --> C["Flow Right"]
    C --> D["Storage 2"]
    D --> E["Flow Left"]
    E --> F["Flow Right"]
    F --> G["Storage 3"]
    G --> H["Flow Left"]
    H --> I["Flow Right"]
    I --> J["Storage 4"]
    J --> K["Flow Left"]
    K --> L["Storage 5"]
    L --> M["Flow Right"]
    M --> N["Storage 6"]
    N --> O["Flow Left"]
    O --> P["Storage 7"]
    P --> Q["Flow Right"]
    Q --> R["Storage 8"]
    R --> S["Flow Left"]
    S --> T["Storage 9"]
    T --> U["Flow Right"]
    U --> V["Storage 10"]

Simple diagram showing two gray blocks connected by a wavy line with an arrow, no text or symbols present.

Technical line drawing of a door frame assembly with mounting holes and a side panel (no text or symbols)

Technical diagram showing a structural assembly with labeled components and an inset detail view of a mechanical component.

Technical line drawing of a door frame with internal components and mounting brackets (no text or symbols)

Technical diagram showing structural components and a magnified detail of a mechanical assembly with labeled parts and an inset detail view.

Line drawing of a washing machine with an inset showing internal components and a screwdriver (no text or symbols)

Technical diagram showing installation steps of a wall-mounted device with screwdriver and bolt components, including mounting and mounting details.

Technical diagram showing exploded view of a washing machine with labeled components and close-ups of the internal structure.

	......
	......

SELON LA NORME EN60436:

Line drawing of a metal rack containing various cylindrical and circular objects (no text or symbols)

Technical line drawing of a mechanical fan or air duct system with internal components and no visible text or symbols

Technical line drawing of a mechanical or electrical component with internal channels and mounting points (no text or symbols)

Diagram of a rectangular container with multiple oval shapes arranged in rows, one central vertical bar, and an arrow pointing right (no text or symbols)

Black silhouette of various kitchen utensils and a row of empty square placeholders (no text or symbols)

Contenu

Pure diagram of a horizontal pipe system with a container and tubing, no text or symbols present

Simple line drawing of a fish being dissolved from a bowl with a magnifying glass (no text or symbols)

Diagram showing a container with vertical bars and an arrow pointing to it, no text or symbols present.

Line drawing of a kitchen appliance with a hand inserting a bag into the air (no text or symbols)

Simple line drawing of a refrigerator with sound waves (no text or symbols)

Control panel interface with icons and labels including power, switches, ECO, 90 mins, and speed settings

Simple diagram with four symbols: a gray square, three asterisks, and two curved arrows (no text or labels)

	ECO

Technical line drawing of a mechanical assembly with rollers and brackets (no text or symbols)

Pure geometric line drawing of a vertical structure with parallel planes, no text or symbols present

Warning sign with warning symbol, circular grid pattern, and crossed X marks

Blank gray rectangular button with a small circular icon in the top-left corner (no text or symbols)

Simple line drawing of a door with indicator lights and a scroll arrow (no text or symbols)

Line drawing of a hand inserting a plug into a device with a screen and plug (no text or symbols)

Line drawing of a hand pressing down on a device with a slide and scroll, showing a rotational arrow (no text or symbols)

Pure horizontal and vertical lines without any text, numbers, or symbols

Diagram showing three different lighting or radar system configurations with labeled components and light paths

Technical line drawings of a device with powder being poured into a chamber and then into a base, showing internal components (no text or symbols)

Diagram of a device with a screen and indicator lights, no text or symbols present

Diagram showing four labeled items: a coffee cup, an ECO logo, a 90° symbol, and a wine glass with a white circle.

graph LR
    A["Hand gesture"] --> B["Hand gesture"]
    B --> C["ECO icon with coffee cup"]
    C --> D["Hand gesture"]

graph LR
    A["Foot"] --> B["Box with lid"]
    B --> C["Bar with grid pattern"]
    C --> D["Machine with lid"]
    D --> E["Bags with cloth"]

Simple line drawing of a trash bin with an exclamation mark above it (no text or symbols on the bins)

[Non-Text]

!

Empty rectangular frame with a black border and a small black tab at the top (no text or symbols)

D1 D2

Solid dark gray image with no visible content, text, or symbols.

Conteúdo

Diagram showing a trash bin symbol with crosshair and minus sign, likely indicating a waste sorting or classification system.

!

Technical line drawing of a 3D printer or printer with internal components and mounting base (no text or symbols)

Line drawing of a woven basket with a handle and grid pattern (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Technical line drawing of a multi-tiered mechanical housing or basket structure (no text or symbols)

Simple line drawing of a mortar pouring liquid into a funnel (no text or symbols)

Diagram showing a grid of vertical bars with an arrow pointing to the bottom (no text or symbols)

Line drawing of a kitchen appliance with a hand pouring liquid from a pan into a sink (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Diagram of a car pulling wheels into a storage bin (no text or symbols)

Diagram of a car chassis with wheels and a directional arrow indicating motion (no text or symbols)

Diagram of a car chassis with wheels and an arrow indicating direction (no text or symbols)

Line drawing of a mechanical device with a hand adjusting its frame (no text or symbols)

Mechanical device with a hand operating a tool, showing internal components and a magnified inset (no text or symbols)

Isometric line drawing of a mechanical or structural component with no visible text or symbols

→

Pure mechanical linkage diagram without any text, numbers, or symbols

Line drawing of a car chassis with visible structural ribs and wheels (no text or symbols)

→

Technical line drawing of a car chassis frame with no text or symbols

Abrir

Filtro grueso Filtro principal Filtro fino

Illustration of hands cleaning a car with a spray gun, showing liquid spray and cleaning components (no text or symbols)

Technical diagram of a mechanical component with an inset close-up showing internal structure (no text or symbols)

Technical illustration of an airplane with structural frame and internal components, showing a close-up of the fuselage (no text or symbols present)

Illustration of a hand using a tool to adjust or install a mechanical component inside a tray (no text or symbols visible)

Line drawing of a kitchen sink with a hand cleaning the surface and a spray bottle pouring liquid (no text or symbols)

!

Symbolic illustration of a hand with a lightning bolt and smoke trail (no text or numbers)

!
!
!

Illustration of two different plumbing fixtures: a hand holding a faucet and a tap with a handle (no text or symbols present)

!

!

φ 40mm

Line drawing of a minimalist kitchen sink with a grid-patterned wall and side table (no text or symbols)

Simple line drawing of a cabinet or enclosure with arrows indicating direction (no text or symbols)

!

graph TD
    A["Storage 1"] --> B["Flow Left"]
    C["Storage 2"] --> D["Flow Right"]
    B --> E["Central Structure"]
    D --> E
    E --> F["External Connection"]
    style A fill:#f9f,stroke:#333
    style C fill:#f9f,stroke:#333
    style E fill:#ccf,stroke:#333

Simple diagram showing two gray blocks connected by a wavy line with an arrow, no text or symbols present.

Technical line drawing of a door frame assembly with mounting holes and a door handle (no text or symbols)

Technical diagram showing a structural assembly with labeled components and an inset detail view of a mechanical component.

Technical line drawing of a door frame with internal components and mounting brackets (no text or symbols)

Technical diagram showing structural components and a magnified detail of a mechanical assembly with labeled parts and an inset detail view.

Line drawing of a washing machine with an inset showing internal components and a screwdriver (no text or symbols)

Technical diagram showing assembly steps of a door panel with screwdriver and bolt, including mounting and locking instructions.

Technical diagram showing exploded view of a washing machine with labeled components and close-ups of internal parts.

	......
	......

Line drawing of a metal crate filled with various plastic containers (no text or symbols)

Technical line drawing of a mechanical or electrical component with internal fan-like structures and no visible text or symbols

Technical diagram of a multi-chamber electrical or electrical enclosure with numbered components and wiring layout

Diagram of a rectangular container with multiple oval shapes arranged in rows, one central vertical bar, and an arrow pointing right (no text or symbols)

Black silhouette of various kitchen utensils arranged in rows with square placeholders below (no text or symbols)

Conteúdo

Pure diagram of a room interior with a cabinet and pipe system (no text or symbols)

Simple line drawing of a mechanical or electrical component with a hammer, screw, and droplet on a surface (no text or symbols)

Diagram showing a container with vertical bars and an arrow pointing to it, no text or symbols present.

Diagram of a kitchen appliance with a hand inserting into the airway (no text or symbols)

Simple line drawing of a refrigerator with sound waves (no text or symbols)

graph LR
    A["Power"] --> B["Battery"]
    B --> C["Indicator Light"]
    C --> D["Eco"]
    D --> E["Intensive"]
    D --> F["90 mins"]
    D --> G["Rapid"]
    H["P ½"] --> I["Control Panel"]
    J["DII"] --> K["Control Panel"]

	※	※
	↔	↔
	ECO

Technical line drawing of a mechanical assembly with rollers and brackets (no text or symbols)

Pure geometric diagram of vertical planes intersecting a horizontal line, no text or symbols present

Warning sign with warning symbol, grid pattern, and crossed X marks in a circular frame

Blank gray rectangular button with a small circular icon in the top-left corner (no text or symbols)

Simple line drawing of a device with a screen and indicator lights, no text or symbols present

Line drawing of a hand inserting a device into a device with a screen showing a tree (no text or symbols)

Illustration of a hand pressing down on a device with a scroll wheel (no text or symbols)

Diagram showing three different lighting or radar system configurations with labeled components and light paths

Technical line drawings of a portable stove with dust being poured into a chamber and then placed on a base (no text or symbols)

Simple line drawing of a device with a screen and indicator lights (no text or symbols)

Diagram showing four labeled items with icons and dots, likely representing a conceptual or schematic layout.

graph LR
    A["Foot Icon"] --> B["Hand Icon"]
    B --> C["ECO Box Icon"]
    C --> D["Hand Icon"]

graph LR
    A["Foot"] --> B["Box with lid"]
    B --> C["Bar with grid pattern"]
    C --> D["Machine with lid"]
    D --> E["Bags with cloth"]

Simple line drawing of a bucket with a warning sign above it (no text or symbols on the bucket itself)

[Non-Text]

Warning symbol with exclamation mark on black background

D1 D2

Solid dark gray image with no visible content, text, or symbols.

CONDIÇÕES DA GARANTIA

Scan for manual in other languages and further updates: