Q: Can the Toshiba RAS-25G2KVP-ND air conditioner be controlled remotely?

Yes, the Toshiba RAS-25G2KVP-ND air conditioner has remote control capabilities . The standard model comes with a wired remote control with an LCD screen , allowing you to operate the unit remotely to adjust the temperature, operating modes, and other settings directly from your location. For further convenience, you can opt for smart control via your optional Wi-Fi remote (Toshiba Smart M) , available as a separate accessory. This adapter allows you to control your air conditioner from your smartphone or any other connected device, providing more flexible and extended remote management.

Q: What is the cooling capacity of the Toshiba RAS-4M27S3AV-E air conditioner?

The cooling capacity of the Toshiba RAS-4M27S3AV-E air conditioner is 8 kW . This multisplit outdoor unit with inverter technology can manage up to 4 indoor units simultaneously, making it suitable for cooling medium to large-sized areas. In addition to the cooling function, this unit also offers a heating power of up to 9 kW , making it a complete reversible system for year-round use. The inverter technology ensures continuous power modulation to optimize energy consumption according to actual cooling or heating needs. This capacity of 8 kW allows for efficient cooling of spaces totaling up to 90 m² distributed over 4 different zones, with power adapted to each space according to its size and insulation. The system operates on a single phase with a 220-240 V supply and uses R32 refrigerant, an environmentally friendly refrigerant fluid. For optimal operation, installation by a qualified professional is recommended, and annual maintenance helps maintain the performance and durability of the system.

Question 1

What does the rapid blinking of the OPERATION indicator on my TOSHIBA air conditioner mean?

Accepted Answer

The OPERATION indicator (green) on your TOSHIBA RAS-16SAVP-E air conditioner may blink for several reasons:

Blinking after power on

When you turn on the power circuit breaker, the OPERATION indicator normally blinks. This blinking stops as soon as you press the START/STOP button on the remote control.

Rapid blinking during operation

A rapid blinking (frequency of 5 Hz) of the OPERATION indicator may indicate a malfunction or automatic reset of the unit. You will also hear three beeps from the built-in chime.

What to do?

First, check that the unit has just been powered on - if so, press START/STOP to stop the blinking.
If the rapid blinking persists accompanied by beeping sounds, this indicates a problem requiring diagnosis or technical intervention.
In normal operation, the OPERATION indicator should remain steadily lit (not blinking).

Refer to the troubleshooting section of your manual or contact TOSHIBA customer service if the problem persists.

Question 2

Can the Toshiba RAS-25G2KVP-ND air conditioner be controlled remotely?

Accepted Answer

Yes, the Toshiba RAS-25G2KVP-ND air conditioner has remote control capabilities.

The standard model comes with a wired remote control with an LCD screen, allowing you to operate the unit remotely to adjust the temperature, operating modes, and other settings directly from your location.

For further convenience, you can opt for smart control via your optional Wi-Fi remote (Toshiba Smart M), available as a separate accessory. This adapter allows you to control your air conditioner from your smartphone or any other connected device, providing more flexible and extended remote management.

Question 3

How do I clean my TOSHIBA MMK-AP0123H air conditioner?

Accepted Answer

Here’s how to effectively clean your TOSHIBA MMK-AP0123H air conditioner according to the manufacturer's recommendations:

Cleaning the air filter

Step 1: Open the air intake grille upwards
Step 2: Remove the filter from its housing
Step 3: Clean it with a vacuum cleaner or lukewarm water only
Step 4: Allow the filter to dry completely before reinstalling it
Step 5: Reinstall the filter in the grille

Important: Absolutely avoid aggressive detergents during cleaning, as they may damage the filter. The filter is washable and reusable, not disposable.

A filter cleaning alarm will appear on your device to indicate when cleaning is necessary. Regular maintenance of the filter ensures the best performance of your air conditioner.

Question 4

How to set the TOSHIBA SHORAI R32 air conditioner to heating mode?

Accepted Answer

To set your TOSHIBA SHORAI R32 air conditioner to heating mode, follow these steps:

Press the MODE button on your remote control
Hold down or press repeatedly until you select the Heat mode (heating)
Use the TEMP button to set your desired temperature (maximum 30°C)

Speed up heating: If you want your room to warm up faster, you can activate the Hi-POWER mode (available depending on the selected mode).

Once set, the LCD screen on your remote control will display the active settings.

Question 5

What is the cooling capacity of the Toshiba RAS-4M27S3AV-E air conditioner?

Accepted Answer

The cooling capacity of the Toshiba RAS-4M27S3AV-E air conditioner is 8 kW. This multisplit outdoor unit with inverter technology can manage up to 4 indoor units simultaneously, making it suitable for cooling medium to large-sized areas.

In addition to the cooling function, this unit also offers a heating power of up to 9 kW, making it a complete reversible system for year-round use. The inverter technology ensures continuous power modulation to optimize energy consumption according to actual cooling or heating needs.

This capacity of 8 kW allows for efficient cooling of spaces totaling up to 90 m² distributed over 4 different zones, with power adapted to each space according to its size and insulation. The system operates on a single phase with a 220-240 V supply and uses R32 refrigerant, an environmentally friendly refrigerant fluid.

For optimal operation, installation by a qualified professional is recommended, and annual maintenance helps maintain the performance and durability of the system.

Question 6

What does the simultaneous flashing of the ON/OFF button, the Wi-Fi indicator, and the timer indicator on a Toshiba Super Daisekai air conditioner mean?

Accepted Answer

The simultaneous flashing of the ON/OFF button, the Wi-Fi indicator, and the timer indicator on your Toshiba Super Daisekai air conditioner generally indicates an error code or a system malfunction. Here’s how you can proceed to try to resolve this issue:

Troubleshooting Steps:

Restarting the device: Turn off the air conditioner and unplug it from the electrical outlet. Wait about 5 to 10 minutes before plugging it back in and turning it on again. This helps to reset some temporary malfunctions.
Checking filters and air intakes: Ensure that the air filters and intake grilles are not blocked by dust or debris, which could cause improper functioning.
Resetting the air conditioner: If your model has a reset button, use it. Otherwise, the restart mentioned above can serve as a reset.
Interpreting error codes: The flashing indicators often correspond to a specific error code. If the problem persists, it may be helpful to note the flashing sequence and contact a specialized technical service for precise assistance.

If the problem persists after these checks, it is recommended to call a qualified professional to diagnose and repair your Toshiba Super Daisekai air conditioner.

Question 7

What do the symbols displayed on the TOSHIBA MMK-AP0153H air conditioner mean?

Accepted Answer

The symbols displayed on your TOSHIBA MMK-AP0153H air conditioner correspond to the various functions and settings available to optimize its use. Here are the most common symbols and their meanings:

Power Symbol: A circle with a vertical line at the top, indicating the device's power on or off.
Fan Speed: An icon in the shape of a fan that allows you to adjust the airflow speed (low, medium, high).
Temperature Control: A thermometer symbolizing the ability to increase or decrease the desired temperature.
Mode Selection:
- Snowflake: cooling mode
- Sun: heating mode
- Water droplets: dehumidification mode
- Wind: ventilation only mode
Timer: A clock that allows you to schedule automatic shut-off or power on at a set time.
Sleep Mode: A crescent moon indicating quiet and economical operation for the night.
Oscillation: Arrows or a fan with curved lines indicating that the adjustable louvers move to distribute air evenly.

These symbols facilitate a quick understanding of the active functions on your air conditioner and help you adjust the settings according to your needs.

Question 8

How to adjust the air flow direction on a TOSHIBA air conditioning unit to avoid a 45-degree angle downwards?

Accepted Answer

To adjust the air flow direction of your TOSHIBA air conditioning unit (models Suzuli/Suzumi RAS-B18N3KV2-E, RAS-B22N3KV2-E, RAS-B10UFV-E1, RAS-B13UFV-E1, RAS-B18UFV-E1) and prevent the louver from blowing systematically at a 45-degree angle downwards, you have two specific controls on the remote control.

Vertical adjustment (automatic): The SWING button (button 6 on your remote control) allows you to control the automatic swinging of the air blowing louver. Press this button once to set the louver to automatic sweep mode, which makes it cover all angles from top to bottom. Press again to stop the sweep.

Vertical locking at a specific angle: To fix the blowing louver in a particular position and avoid the 45-degree angle downwards, use the FIX button (button 5 on your remote control). Press this button to lock the louver in the desired vertical direction. If the louver is currently at 45 degrees and this is not your preference, you can first use the SWING button to sweep it until you find the ideal angle, then press FIX to lock it in that position.

Horizontal adjustment (sideways): The sideways (left-right) adjustment of the louver must be done manually. You can slightly adjust the slats by hand in the desired direction. Important: do not move the blowing louver manually in the vertical direction, use the SWING and FIX buttons for that to avoid damaging the mechanism.

Note: the blowing louver may automatically reposition itself according to the selected operating mode (cooling, heating, ventilation, etc.). If you notice that the louver returns to 45 degrees after a mode change, check your setting with the FIX button and restore it if necessary.

Question 9

How to use the remote control of the TOSHIBA SHORAI R32 air conditioner?

Accepted Answer

The remote control of the TOSHIBA SHORAI R32 air conditioner has several buttons to easily control all the functions of your device. Here’s how to use the main commands.

Power on and off: Press the power button to turn the air conditioner on or off. The LCD screen will display the current settings.

Mode selection: Use the MODE button to choose from the following modes: Cool (minimum cooling 17°C), Heat (maximum heating 30°C), Dry (dehumidification with moderate automatic cooling), Fan only (no temperature change) or Auto (automatic selection of the appropriate mode).

Temperature adjustment: Press the TEMP button to adjust the desired temperature. In Fan only mode, no temperature is displayed. The acceptable ranges vary depending on the selected mode.

Fan speed: The FAN button allows you to select between AUTO, LOW, LOW+, MED, MED+, and HIGH speeds. You can also press SWING to automatically oscillate the airflow louver, or FIX to direct the air in a fixed direction.

Advanced functions: The Hi-POWER mode speeds up the cooling or heating of the room (not available in Dry and Fan only modes). The ECO mode optimizes energy savings by automatically adjusting the temperature: in cooling, it increases by 1°C per hour for a maximum of 2 hours; in heating, it gradually decreases. The timer (OFF button) can be set between 0.5 and 12 hours to automatically turn off the device. Use CHECK to verify the current settings and CLEAR to reset.

Screen adjustment: You can adjust the brightness of the LCD display by holding down the CLEAR button for 3 seconds until the brightness level is displayed, then adjust with the + and - buttons in 4 different levels.

If there is a problem with the remote control, remove the batteries (AAA type) for a few seconds and reinsert them to reset. If the remote control is faulty or the batteries are dead, you can still use the RESET button on the indoor unit to turn the device on or off.

Question 10

Is it necessary to use a relay with the TOSHIBA RAV-SP1402AT-E air conditioner?

Accepted Answer

The use of a relay with the TOSHIBA RAV-SP1402AT-E air conditioner mainly depends on the type of control or thermostat you wish to install. Here are the key points to consider:

1. Wired thermostats

If you are installing a wired thermostat, it is important to check the switching capacity of the thermostat. Some thermostats cannot directly handle the electrical load of the air conditioner. In this case, a relay is necessary to protect the thermostat and ensure safe and reliable operation.

2. Wireless or connected thermostats

For wireless or connected thermostats designed to work directly with air conditioners, a relay is generally not required as these devices are often compatible with direct control of the unit.

3. Specifics of the RAV-SP1402AT-E model

The TOSHIBA RAV-SP1402AT-E air conditioner may be compatible with certain thermostats and control systems without a relay, but this depends on the exact model and installation requirements. It is recommended to check the technical specifications of the thermostat and air conditioner to confirm the need for a relay.

In summary: a relay is only necessary if the thermostat does not support the electrical load of the air conditioner or if installation recommendations require it. Otherwise, for compatible thermostats, the relay is not mandatory.

User manual TOSHIBA Air-conditioner : user manuals and guides in PDF

Models TOSHIBA Air-conditioner most viewed

Other categories TOSHIBA

Recent questions about Air-conditioner TOSHIBA