Does the Zyxel XGS-4528F switch offer user accounts other than the default administrator account?

Question

Accepted Answer

Yes, the Zyxel XGS-4528F switch offers several user accounts in addition to the default administrator account. The system supports up to five simultaneous accesses via the web interface: one administrator account (admin) and up to four additional user accounts.

The two types of available accounts are:

Administrator account (admin): Full read and write access. You can modify all the switch settings. The default password is 1234 (it is strongly recommended to change it).
Non-administrator accounts (up to 4 others): Read-only access by default. These accounts can view configurations and statistics without being able to modify them via the web interface.

To manage user accounts: Log in to the XGS-4528F switch via its web interface (http://192.168.1.1 by default), then navigate to Management > Access Control > Logins. In this screen, you can create new accounts, modify existing passwords, and manage authentication settings. Each account can have a unique username (up to 32 characters) and a personal password.

For users who need additional administrator rights in CLI commands (privilege levels from 0 to 14), you can configure these permissions via the command line, or use external RADIUS or TACACS+ authentication for centralized access and rights management across multiple devices.

User manual ZYXEL Network switch : user manuals and guides in PDF

Models ZYXEL Network switch most viewed

Other categories ZYXEL

Recent questions about Network switch ZYXEL