How to remove the blade from the PANASONIC ERGB62?

Q: How to remove the blade from the PANASONIC ERGB62?

Removing the blade: Hold the main body of the PANASONIC ERGB62 firmly with one hand. Place your thumb against the blades (the sharp part). Push the blades outward, away from the main body. They should come off easily. Reassembly: Align the blade mounting hook with its slot on the main body. Push the blade until you hear or feel a click (this confirms it is locked in place). Maintenance tip: After removing, take the opportunity to clean the blade under running water with the included brush to remove accumulated hair. Also, apply a few drops of oil to the lubrication points before reassembling.

Question

Accepted Answer

Removing the blade:

Hold the main body of the PANASONIC ERGB62 firmly with one hand.
Place your thumb against the blades (the sharp part).
Push the blades outward, away from the main body. They should come off easily.

Reassembly:

Align the blade mounting hook with its slot on the main body.
Push the blade until you hear or feel a click (this confirms it is locked in place).

Maintenance tip: After removing, take the opportunity to clean the blade under running water with the included brush to remove accumulated hair. Also, apply a few drops of oil to the lubrication points before reassembling.

User manual PANASONIC Beard trimmer : user manuals and guides in PDF

Models PANASONIC Beard trimmer most viewed

Other categories PANASONIC

Recent questions about Beard trimmer PANASONIC