ER-HGP65 - Beard trimmer PANASONIC - Free user manual and instructions

Product Type	Beard Trimmer
Brand	Panasonic
Model	ER-HGP65
Dimensions (approx.)	180 x 50 x 40 mm
Weight (approx.)	200 g
Power Source	Rechargeable battery (lithium-ion)
Charging Time	8 hours for full charge
Operating Time	Approximately 40 minutes
Blade Material	Stainless steel
Cutting Length Settings	0.5 mm to 10 mm, adjustable with dial
Washable	Yes, waterproof design for easy cleaning
Maintenance	Rinse under water; oil blades periodically
Safety Features	Lock function to prevent accidental operation
Included Accessories	Adjustable comb attachment, cleaning brush, oil, charger
Spare Parts Availability	Blades and combs available as separate accessories
Warranty	1 year limited warranty

Frequently Asked Questions - ER-HGP65 PANASONIC

How do I adjust the cutting length on the Panasonic ER-HGP65?

Rotate the dial on the back of the trimmer to select your desired length, ranging from 0.5 mm to 10 mm. Ensure the trimmer is off when adjusting.

Can I use the ER-HGP65 in the shower?

Yes, the ER-HGP65 is waterproof and can be used in the shower or wet conditions. Rinse it under water after use for easy cleaning.

How long does it take to fully charge the battery?

The lithium-ion battery requires approximately 8 hours for a full charge, providing about 40 minutes of cordless operation.

How do I clean the blades?

Remove the blade assembly and rinse it under running water. Use the included cleaning brush to remove any hair residue. Dry thoroughly before reattaching.

What should I do if the trimmer stops working?

Check that the battery is charged. If not, charge it fully. If the problem persists, reset by turning off and on again. For further issues, contact Panasonic support.

Can I replace the blades myself?

Yes, the blades are replaceable. Purchase genuine Panasonic ER-HGP65 blades and follow the manual instructions for replacement.

Is the ER-HGP65 suitable for long beards?

Yes, the adjustable comb attachment allows trimming lengths up to 10 mm, suitable for maintaining longer beards. For very long beards, use scissors first.

How do I lock the trimmer to prevent accidental use?

Slide the lock switch located on the side of the trimmer to the lock position. The indicator will show it is locked.

What oil should I use for the blades?

Use the included special oil or a light machine oil. Apply a few drops to the blades every few months to maintain performance.

Where can I download the user manual?

The manual is available for free download on notice-facile.com or the official Panasonic support website. Search for model ER-HGP65.

USER MANUAL ER-HGP65 PANASONIC

Operating Instructions

AC/Rechargeable Professional Hair Clipper

Model No. ER-HGP65

9

English	5	Svenska	55	Magyar	103
Español	15	Suomi	65	Română	113
Dansk	25	Polski	73	Türkçe		123
Português	35	Česky 83		Ελληνικά	133
Norsk	45	Slovensky 93

Panasonic

Operating Instructions

AC/Rechargeable Professional Hair Clipper

Model No. ER-HGP65

Contents

Safety precautions.... 7 Maintenance ....11

Important information ....9 Troubleshooting ....12

Parts identification ....9 Disposal of the appliance ....12

Charging 10 Specifications 12

How to use ......10

Thank you for purchasing this Panasonic product.

Before operating this unit, please read these instructions completely and save them for future use.

WARNING

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• The supply cord cannot be replaced. If the cord is damaged, the AC adaptor should be scrapped.
• Do not use anything other than the supplied AC adaptor for any purpose. Also, do not use any other product with the supplied AC adaptor. (See page 9.)
• Keep the appliance dry.
• The following symbol indicates that a specific detachable power supply unit is required for connecting the electrical appliance to the supply mains. The type reference of power supply unit is marked near the symbol.

Safety precautions

Make sure to follow these instructions.

To prevent accidents, injuries or damage to property, please follow the instructions below.

■ The following chart indicates the degree of damage caused by improper operation.

DANGER

Indicates potential hazard that will result in serious injury or death.

WARNING

Indicates potential hazard that could result in serious injury or death.

CAUTION

Indicates potential hazard that could result in minor injury or property damage.

WARNING

▶ This appliance

• This appliance has a built-in rechargeable battery. Do not throw into fire or apply heat. Do not charge, use, or leave in a high temperature environment.
• Doing so may cause overheating, ignition, or explosion.
• Do not modify or repair.
• Doing so may cause fire, electric shock, or injury. Contact an authorized service centre for repair (replacement of battery, etc.).
• Never disassemble except when disposing of the appliance.
• Doing so may cause fire, electric shock, or injury.

▶ Power supply

• Do not connect or disconnect the adaptor to a household outlet with a wet hand.
• Doing so may cause electric shock or injury.
• Do not immerse the main body and AC adaptor in water or wash it with water.
• Do not place the main body and AC adaptor over or near a water-filled sink or bathtub.
• Do not use when the AC adaptor is damaged or when the fitting into the household outlet is loose.
• Do not damage the cord or the power plug.
• Do not deface, modify, forcefully bend or pull the cord or the power plug. Also, do not place anything heavy on, twist or pinch the cord.
• Doing so may cause electric shock or fire due to a short circuit.
• Do not use in a way exceeding the rating of the household outlet or the wiring.
• Exceeding the rating by connecting too many plugs to one household outlet may cause fire due to overheating. • Fully insert the adaptor.
• Failure to do so may cause fire or electric shock.
• Regularly clean the power plug, the appliance plug and the charging plug to prevent dust from accumulating.

- Failure to do so may cause fire due to insulation failure caused by humidity.

▶ Preventing accidents

• Do not place within reach of children or infants. Do not let them use it.
• Putting parts or accessories in the mouth may cause an accident or injury.

WARNING

- If the lubrication oil is consumed accidentally, do not induce vomiting, drink a large amount of water, and contact a physician.

- If the lubrication oil comes into contact with eyes, immediately wash thoroughly with running water, and contact a physician.

- Failure to do so may result in physical problems.

▶ In case of an abnormality or malfunction

- Immediately stop using and remove the adaptor if there is an abnormality or malfunction.

- Failure to do so may cause fire, electric shock, or injury.

- The main body or AC adaptor is deformed or abnormally hot.

- The main body or AC adaptor smells of burning.

- There is an abnormal sound during use or charging of the main body.

- Immediately request inspection or repair to an authorized service centre.

CAUTION

▶ Protecting the skin

- Do not press the blade strongly against the skin.

- Do not use the appliance for any purpose other than trimming hair and beards.

- Do not directly apply the blades on ears or rough skin (such as swellings, injuries or blemishes).

- Doing so may cause injury to skin or ears.

- Check that the blades are not damaged or deformed before use.

- Failure to do so may cause skin injury.

▶ Note the following precautions

- Do not allow metal objects or trash to adhere to the power plug, the appliance plug or the charging plug.

- Doing so may cause electric shock or fire due to a short circuit.

- Disconnect the adaptor from the household outlet when not using.

- Failure to do so may cause electric shock or fire due to electrical leakage resulting from insulation deterioration.

Handling of the removed battery when disposing

! DANGER

- The rechargeable battery is exclusively for use with this appliance. Do not use the battery with other appliances.

- Do not charge the battery after it has been removed from the appliance.

- Do not throw into fire or apply heat.

- Do not hit, disassemble, modify, or puncture with a nail.

- Do not let the positive and negative terminals of the battery come into contact with each other through metallic objects.

- Do not carry or store the battery together with metallic jewelry such as necklaces and hairpins.

- Do not use or leave the battery where it will be exposed to high temperatures, such as under direct sunlight or near other sources of heat.

- Never peel off the tube.

- Doing so may cause overheating, ignition, or explosion.

WARNING

• After removing the rechargeable battery, do not keep it within reach of children and infants. - The battery will harm the body if accidentally swallowed. If this happens, consult a physician immediately. - If the battery fluid leaks out and comes in contact with the eyes, do not rub the eyes, and thoroughly rinse with clean water, such as tap water. - Failure to do so may cause eye injury. Consult a physician immediately.

CAUTION

- If the battery fluid leaks out and comes in contact with the skin or clothes, rinse off with clean water, such as tap water.

- Failure to do so may cause inflammation.

Important information

• This appliance is designed for professional use to trim hair and beards. It can be operated on either an AC adaptor or rechargeable battery.
• Apply the lubrication oil to the blade before and after each use. (See page 11.) Failure to apply the lubrication oil may cause the following problems.
• The appliance has become blunt.
• Shorter operating time.
• Louder sound.
• The appliance may become warm during operation and/or charging. This is normal.
• You should not allow permanent wave lotion, hair dye or hair spray to come into contact with the main body or the blade. Doing so may result in cracking or corrosion.
• Charge the appliance correctly according to these Operating Instructions. (See page 10 "Charging".)
• This appliance contains battery that is only replaceable by skilled persons. Please contact an authorized service centre for the details of repair.

Parts identification (Fig. 1)

A Main body

① Trimming height indicator

② Power switch

③ Dial (Height adjustment control)

④ Recharge lamp (White)

⑤ Charge status lamp (Red)

⑥ Appliance socket

B Blade

© 3 mm/4 mm comb attachment

D 6 mm/9 mm comb attachment

E 12 mm/15 mm comb attachment

F AC adaptor (RE9-82)

⑦ Adaptor

⑧ Power plug

⑨ Cord

⑩ Appliance plug

Accessories

© Cleaning brush

H Lubrication oil

Charging (Fig. 2)

1 Plug the AC adaptor into the main body and the household outlet.

• Check that the charge status lamp (●) glows. It turns off after charging is completed.
• Charging is completed after approximately 1 hour.

2 Disconnect the power plug after charging is completed.

• Charging is required when the recharge lamp blinks.
• The appliance can be used for approximately 5 minutes after the recharge lamp blinks.

Insert the main body again after removing it from the AC adaptor. If the charge status lamp glows and then turns off after 5 seconds, charging is completed.

Notes

• Recommended ambient temperature for charging is 10°C - 35°C. It may take longer to charge, or the charge status lamp will blink quickly and the battery may fail to charge properly in extremely high or low temperatures.
• 1 full charge will provide approximately 50 minutes of continuous operation. (Based on dry using at 20°C - 30°C) The operating time may differ depending on the frequency of use and the operating method.
• When charging the appliance for the first time or when it has not been in use for more than 6 months, the charging time may change or the charge status lamp may not glow for a few minutes. It will eventually glow if kept connected.
• If there is noise from the radio or other sources while using or charging the appliance, move to a different location to use the appliance.
• The battery will deteriorate if not used for over 6 months, so make sure to perform a full charge at least once every 6 months.

AC operation

If you connect the AC adaptor to the appliance in the same way as for charging, and turn on the power, you can use it.

• The charge status lamp glows when using AC operation.
• If the remaining battery is too low, the blades may move slowly or stop, even with the AC operation. In this case, charge the battery for 1 minute or more.
• The battery will be discharged, even with the AC operation.

How to use

• Check that the blades are not damaged or deformed before use.
• Apply the lubrication oil to the blade before and after each use. (See page 11.)
• The appliance may not operate in an ambient temperature lower than approximately 5 °C. • After use, turn it off and clean it.

1 Set the trimming height.

2 Turn on the power.

▶ About setting the trimming height

For a trimming height of 0.8 mm to 2.0 mm, turn the dial to the desired height.

Use an attachment for a trimming height higher than 3 mm or more.

Removing and mounting the comb attachments

▶ Mount (Fig. 3)

1. Select the trimming heights indicated on the insides and sides of the attachments.
2. Set the dial to "0.8" and then mount the attachment to the main body as illustrated.

▶ Remove (Fig. 4)

Slide one side of the attachment off the mounting in the direction indicated with the arrow.

Maintenance

• Make sure that the main body is turned off.
• Clean the main body, blade and the comb attachment after each use. (If not cleaned, the motion will become poor and the sharpness will worsen.) Lubricate after cleaning.
• Do not use thinner, benzine or other chemicals. Doing so may cause failure, cracking or discoloration of the parts. Clean the main body only with a soft cloth slightly dampened with tap water or soapy tap water.

How to clean

1. Brush off any hairs from the main body and from around the blade. (Fig. 5-①)
2. Brush off the hairs from the blade edge. (Fig. 5-②)
3. Brush any hair trimmings out from between the stationary blade and the moving blade while pressing down the cleaning lever (a) to raise the moving blade. (Fig. 5-3)

Removing and mounting the blade

▶ Remove (Fig. 6)

Hold the main body with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Mount

1. Set the dial to "2.0". (Fig. 7-①)
2. Fit the mounting hook (⑥) into the blade mounting (©) on the main body and push in until it clicks. (Fig. 7-2)

Replacement parts

Replacement parts are available at your dealer or Service Centre.

Replacement parts for ER-HGP65	Blade WER9920
	Lubrication oil WE S003P

• Using anything other than the recommended genuine blade will result in any warranty claim to expire. • We recommend Panasonic lubrication oil WES003P.

Lubrication (Fig. 8)

- Apply the lubrication oil to the blade before and after each use.

1. Remove the blade. 2. Apply a drop of the lubrication oil to each indicated point. 3. Attach the blade to the main body, turn on the power and allow to run for approximately 5 seconds.

Troubleshooting

Problem Action

The appliance has become blunt.

Operating time is short.

Appliance stopped functioning.

The appliance cannot be charged.

Makes a loud sound.

Until problems are solved, please follow each procedure as follows:

1. Charge the appliance. (See page 10.)
2. Clean the blade and apply lubrication oil. (See page 11.)
3. Replace the blade. (See page 11.)
4. Have the battery replaced by an authorized service centre.

Push the main body into the appliance plug all the way.

Charge within the recommended charging temperature of 10 °C to 35 °C.

Apply lubrication oil. (See page 11.)

Confirm that the blade is properly attached.

If the problems still cannot be solved, contact your dealer or a service centre authorized by Panasonic for repair.

Disposal of the appliance

Remove the built-in rechargeable battery before disposing of the appliance.

• The battery is to be disposed of safely.

- This figure must only be used when disposing the appliance, and must not be used to repair it. If you dismantle the appliance yourself, it may cause malfunction.

How to remove the battery (Fig. 9)

• Remove the appliance from the AC adaptor.
• Press the power switch to turn on the power and then keep the power on until the battery is completely discharged.
• Perform steps and lift the battery, and then remove it. • Take care not to short circuit the positive and negative terminals of the removed battery, and insulate the terminals by applying tape to them.

For environmental protection and recycling of materials This appliance contains a Lithium-ion battery.

Please make sure that the battery is disposed of at an officially assigned location, if there is one in your country.

Specifications

Power source	See the name plate on the AC adaptor. (Automatic voltage conversion)
Motor voltage	3.6 V---
Charging time Approx. 1 hour

For more information about the energy efficiency of the product, please visit our website, www.panasonic.com, and enter the model number in the search box.

Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and batteries, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local authority.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

Importer:

Panasonic Marketing Europe GmbH

Authorized Representative in EU:

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Manufactured by:

Panasonic Corporation

1006, Oaza Kadoma, Kadoma City, Osaka, Japan

Panasonic

Panasonic Testing Centre

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Manufactured by:

Panasonic Corporation

1006, Oaza Kadoma, Kadoma, Osaka, Japan

Panasonic

Panasonic Testing Centre

Reservedeler for ER-HGP65	Blad WER9920
	Smøreolje WES003P

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Manufactured by:

Panasonic Corporation

1006, Oaza Kadoma, Kadoma, Osaka, Japan

Panasonic

Instruction Manual

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Manufactured by:

Panasonic Corporation

1006, Oaza Kadoma, Kadoma, Osaka, Japan

Panasonic

Operating Instructions

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Manufacturer:

Panasonic Corporation

1006, Oaza Kadoma, Kadoma City, Osaka, Japan

Panasonic

Operating Instructions

▶ Mounting (Fig. 3)

Panasonic Testing Centre

Panasonic Testing Centre

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Manufacturer:

Panasonic Corporation

1006, Oaza Kadoma, Kadoma City, Osaka, Japan

Panasonic

Operating Instructions

Panasonic Testing Centre

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Manufactured by:

Panasonic Corporation

1006, Oaza Kadoma, Kadoma City, Osaka, Japan

Panasonic

© 3 mm/4 mm comb attachment

D 6 mm/9 mm comb attachment

E 12 mm/15 mm comb attachment

F AC adapter (RE9-82)

⑦ Adapter

⑧ Electric plug

⑨ Cable

⑩ Device plug

Accessories

© Cleaning brush

H Oil

Charging (Fig. 2)

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Panasonic Testing Centre

⑤ EN, SP, DA, PT, NB, SV, FI, PL, CS, SK, HU, RO, TR, GR