ER-GB50 - Beard trimmer PANASONIC - Free user manual and instructions
Find the device manual for free ER-GB50 PANASONIC in PDF.
| Product Type | AC/Rechargeable Beard/Hair Trimmer |
| Model Number | ER-GB50 |
| Power Source | AC adaptor (RE9-49 / RE9-52 for Saudi Arabia) |
| Motor Voltage | 1.2 V DC |
| Charging Time | Approx. 8 hours (first charge or after 6 months: 16 hours) |
| Usage Time (full charge) | Approx. 40 minutes |
| Trimming Lengths | With comb attachment: 1 mm to 20 mm (adjustable); Without attachment: approx. 0.5 mm |
| Attachments Included | Comb attachment (1-20 mm), Detail trimming attachment |
| Blade Type | Moving blade and stationary blade |
| Blade Life | Approx. 3 years (when used 10 min every 3 days) |
| Battery Type | Built-in rechargeable Nickel-Metal Hydride |
| Battery Life | Approx. 3 years (when charged 3 times per month) |
| Water Resistance | Cleanable under running water (detach power cord) |
| Cleaning Method | Brush cleaning or rinse with water (do not use salt/hot water) |
| Lubrication | Apply oil before and after each use (oil included) |
| Safety Features | Automatic shut-off when not in use? Not specified; do not use damaged blades; do not use in bathroom/shower with cord |
| Accessories Included | AC adaptor, cleaning brush, oil, travel pouch |
| Repairability | Replaceable blade; battery removal for disposal (do not replace battery for reuse) |
| Intended Use | Household use only; not for animals |
Frequently Asked Questions - ER-GB50 PANASONIC
User questions about ER-GB50 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Beard trimmer in PDF format for free! Find your manual ER-GB50 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ER-GB50 by PANASONIC.
USER MANUAL ER-GB50 PANASONIC
Operating Instructions
(Household) AC/Rechargeable Beard/Hair Trimmer
Model No. ER-GB50
English 2

Before operating this unit, please read these instructions completely and save them for future use.
Thank you for choosing a Panasonic AC/Rechargeable Beard/Hair Trimmer. Please read all instructions before use.
Important
This trimmer has a built-in rechargeable battery. Do not throw into fire, apply heat, or charge, use, or leave in a high temperature environment.
▶ Using the trimmer
- Check that the blades are not damaged or deformed before use.
- Terminate the usage when there is abnormality or failure.
- Turn off the appliance before changing the trimming length or removing the comb attachment.
- Before each use, apply oil at the places marked with arrows. (See page 6.)
- The appliance should not be used on animals.
- Do not press the blade against the skin.
- Do not use the trimmer for any purpose other than trimming.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Never use the AC adaptor in the bathroom or shower room.
- Do not use any power cord or AC adaptor other than this AC adaptor (RE9-49/RE9-52 for Saudi Arabia).
- Charge the appliance in a location where it will not be exposed to direct sunlight or other heat sources, at temperatures of 5°C to 35°C.
- Plug in the AC adaptor into a household outlet where there is no moisture and handle it with dry hands.
▶ Charging the trimmer
- Hold the AC adaptor when disconnecting it from the household outlet. If you tug on the power cord, you may damage it.
- Do not damage or deform the power cord. Do not place heavy objects on the power cord or trap it between objects.
- Do not use the trimmer if the power cord or the AC adaptor is worn, or if the AC adaptor does not fit snugly in the outlet.
- The power cord cannot be replaced. If the cord is damaged, the AC adaptor should be scrapped.
▶ Cleaning the trimmer
Warning
Disconnect the power cord from the trimmer before cleaning it in water to prevent electric shock.
- The housing should not be taken apart as this can affect the watertight construction of the appliance.
- If you clean the trimmer with water, do not use salt water or hot water. Do not soak the trimmer in water for a long period of time.
- Clean the housing only with a soft cloth slightly dampened with tap water or soapy tap water. Do not use thinner, benzine, alcohol or other chemicals.
- Clean the power plug regularly to remove any dust or dirt.
▶ Storing the trimmer
- Store the trimmer in a place with low humidity after use.
- Do not store the trimmer where it will be exposed to direct sunlight or other heat sources.
- Store the AC adaptor in a dry area where it is protected from damage.
- Keep the oil away from children.
Parts identification


(RE9-49) (RE9-52 for Saudi Arabia)
A Main body
① Dial
a. Scale marks
② Charge indicator lamp
③ Power switch [0/1]
B Blade block
④ Cleaning lever ⑤ Moving blade ⑥ Stationary blade ⑦ Mounting hook
F Oil
C Comb attachment (1 mm to 20 mm) D Detail trimming attachment E AC adaptor (RE9-49/RE9-52) ⑧ Power cord ⑨ Appliance plug G Cleaning brush H Travel pouch
Charging the trimmer
You can fully charge the trimmer in 8 hours if it is losing speed. A full charge supplies enough power for approximately 40 minutes of use.
- Slide the power switch on the main body to the "0" position to turn off the trimmer.
- Plug in the AC adaptor into a household outlet.
- Insert the appliance plug into the trimmer.
The charge indicator lamp lights and stays on until the AC adaptor is removed from a household outlet.
- Disconnect the AC adaptor from an outlet when charging is completed.
When charging the trimmer for the first time or when it has not been in use for more than 6 months, please charge it for 16 hours (in order to activate the rechargeable battery). If you charge the trimmer with the battery completely discharged, the charge indicator lamp may not glow immediately. However, the lamp will glow normally after charging for a few minutes.
AC operation
You can use the trimmer while charging, even if the battery capacity is low.
If the trimmer does not work, continue charging it for approx. 1 minute.
Using
Using the trimmer
Trimming your beard and moustache
Trim your beard or moustache using the comb attachment (1 mm to 20 mm).
- Slide the power switch on the main body to the "0" position to turn off the trimmer.
- Make sure there is no damage to the blade.
- Turn the dial to the "1" position.
- Mount the comb attachment to the main body.
- Turn the dial to move the comb attachment to the desired trimming length (between 1 mm and 20 mm).
| Cutting length (mm)(estimate) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |||||
| Scale marks 1 | 2 | 3 | 4 | 5 | • | • | • | 10 |

| Cutting length (mm)(estimate) | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | |||
| Scale marks | •• | •• | 15 | •• | •• | 2 | 0 |
- Actual hair length will be a little longer than the height you set.
- Slide the power switch on the main body to the "1" position to turn on the trimmer.
- After adjusting the trimming length, make sure the attachment is fixed with the switch in the "1" position. When the attachment is mounted correctly, the dial will not turn with the switch set to "1".
- Place the angled face of the comb against the skin at the correct distance and cut the beard by moving the trimmer in all directions to obtain a uniform cut. With curly facial hair, the comb attachment may not cut all of the hair. In this case, remove the comb attachment and use a conventional comb to draw out the remaining uncut hair.

Shaping your moustache
Shape your moustache using the detail trimming attachment.
- Slide the power switch on the main body to the "0" position to turn off the trimmer.
- Mount the detail trimming attachment to the main body.
- Uniformly trim the borders of your moustache or beard, or cut extra hair in tight spots using the blade not covered by the attachment.
• The part covered by the attachment will not cut even if it touches the hair. • Hair may not cut well when the original length of hair is around 1.0 mm long.


Cutting your hair
- Cut hair to the correct height by moving the trimmer back against the flow of the hair.
- Do not use the trimmer in an inverted position. This can cut hair too deeply.
Cutting around the ears
Cut a little, and then gently separate the trimmer from the hair.

Cutting the nape of the neck
Bring the trimmer gently away from the hair to finish.

Do not use the trimmer in an inverted position. This can cut hair too deeply.

▶ Trimming without attachment combs
Trimming your beard without an attachment will trim beard length to approx. 0.5 mm.
Cleaning
Cleaning with brush
- Disconnect the power cord from the trimmer.
- Be sure to set the switch to "0" before you remove the blade.
- Remove the comb attachment.
- Hold the main body, place your thumb against the blades and then push them away from the main body.
- Brush off any hair trimmings from the main body and from around the blade.
- Brush any hair trimmings out from between the stationary blade and the moving blade while pressing down the cleaning lever to raise the moving blade.



Cleaning in water

The mark on the left means suitable for cleaning under an open water tap.
Warning
Disconnect the power cord from the trimmer before cleaning it in water to prevent electric shock.
- Disconnect the power cord from the trimmer.
- Remove the blade.
- Rinse off any hair trimmings that are sticking to the blades with running water.

- Rinse out any hair trimmings that are inside the trimmer with running water.

- Gently shake the trimmer 4 or 5 times and then wipe off any water drops from the trimmer and the blade.
- Place the trimmer on a towel with the power switch on the main body facing downwards to let it dry fully.
Lubrication
Apply the oil to the trimmer before and after each use. Apply a drop of the oil to the points indicated by the arrows.

Remounting the blade
Fit the mounting hook into the blade mounting on the trimmer and then push in until you hear a click.

▶ Blade life
Blade life varies according to the frequency and length of use of the trimmer.
For example, the blade life is approximately 3 years when using the trimmer for 10 minutes every 3 days. Replace the blades if cutting efficiency reduces substantially despite proper maintenance.
▶ Battery life
Battery life varies according to the frequency and length of use of the appliance.
For example, the battery life is approximately 3 years when the battery is charged 3 times a month.
The appliance should not be left for more than 6 months without charging it. The charge drains from the battery and the battery life may be shortened.
Disposal of the trimmer battery
Remove the built-in rechargeable battery before disposing of the trimmer. Please make sure that the battery is disposed of at an officially designated location if there is one. Do not dismantle or replace the battery so that you can use the trimmer again. This could cause fire or an electric shock. Replace it at an authorized service center.
- Disconnect the power cord from the trimmer when removing the battery.
- Discharge the battery completely before removing it.
- Be careful not to short the + and - terminals of the battery after removing it.
- Perform steps 1 to 8 and lift the battery, and then remove it.
- Disconnect the power cord from the trimmer.
- Remove the blade from the trimmer. Remove the 2 screws (a).
- Remove the screw (b).
- Detach the dial cover (c), remove the screw (d) and disconnect the dial (e).
- Detach the housing (f).
- Remove the screws (g).
- Disconnect housing (h).
- Disconnect the battery chamber (i) and remove the battery (j).

Do not attempt to replace the battery for the purpose of reusing the trimmer. This could result in the risk of fire or electric shock.
Important notice regarding environmental protection
The built-in rechargeable Nickel-Metal Hydride battery contains substances that may be environmentally harmful. Please remove the battery before discarding your trimmer.
For environmental protection and recycling of materials This trimmer contains a Nickel-Metal Hydride battery. Please make sure that the battery is disposed of at an officially assigned location, if there is one in your country.
Specifications
| Power source See the name plate on the AC adaptor. | |
| Motor voltage 1. | 2 V DC |
| Charging time Approx. 8 hours | |
This product is intended for household use only.

Cleaning
Cleaning with a brush

Set to “0”.
Clean water.
Cutting hair.
