ER-HGP82 - Beard trimmer PANASONIC - Free user manual and instructions

Product Type	Beard Trimmer
Brand	Panasonic
Model	ER-HGP82
Dimensions (Approx.)	5.5 x 1.2 x 1.6 inches (140 x 30 x 40 mm)
Weight (Approx.)	7.0 oz (200 g)
Power Source	Rechargeable Li-ion battery
Charging Time	8 hours
Operating Time	50 minutes
Cutting Length Range	0.5 mm to 10 mm (adjustable dial)
Precision Dial	Yes, with 19 settings
Pop-up Trimmer	Yes, for detailed edging
Washable	Yes, under running water
Blade Material	Stainless steel, hypoallergenic
Cleaning	Rinse with water; oil blade periodically
Usage	Wet or dry
Water Resistance	IPX5 (water resistant)
Blade Replacement	Replaceable inner and outer blades
Warranty	2 years (limited)
Country of Origin	Japan

Frequently Asked Questions - ER-HGP82 PANASONIC

How do I clean the Panasonic ER-HGP82 beard trimmer?

Remove the blade assembly and rinse it under running water. Use the included brush to remove hair. Dry completely before reassembling. Oil the blades with Panasonic blade oil every few uses.

How do I adjust the cutting length?

Rotate the precision dial at the front of the trimmer. It offers 19 settings from 0.5 mm to 10 mm. The selected length is indicated by the numbers.

Can I use the trimmer in the shower?

Yes, the ER-HGP82 is water resistant (IPX5) and can be used wet or dry. However, do not immerse it completely in water.

How long does the battery last?

A full charge takes 8 hours and provides up to 50 minutes of cordless operation. The LED indicator shows charging status.

Can I replace the blades?

Yes, the inner and outer blades are replaceable. Use genuine Panasonic blades (model WER9910X) for best performance.

Is the trimmer suitable for sensitive skin?

Yes, the blades are hypoallergenic stainless steel and designed to minimize irritation. Use the trimmer on clean, dry skin for best results.

How do I use the pop-up trimmer?

Slide the pop-up trimmer switch upward to reveal a narrow trimmer for precise detailing, such as sideburns or necklines.

What should I do if the trimmer stops working?

Ensure the battery is charged. If it still doesn't work, check the blade assembly for hair jams. Clean and oil it. If the problem persists, contact Panasonic customer support.

How often should I oil the blades?

Oil the blades after every use or at least once a week. Apply one drop of Panasonic blade oil to the blade surface and run the trimmer for a few seconds.

Does the trimmer come with any attachments?

Yes, it includes the trimmer unit, a cleaning brush, oil, and a charging stand. Some models may include a travel case. Check the package contents.

USER MANUAL ER-HGP82 PANASONIC

Operating Instructions

AC/Rechargeable Professional Hair Clipper

Model No. ER-HGP82

English	3	Svenska	65	Magyar	127
Español	15	Suomi	77	Română	141
Dansk	29	Polski	89	Türkçe		153
Português	41	Česky 103		Ελληνικά	167
Norsk	53	Slovensky 115

Panasonic

Operating Instructions

AC/Rechargeable Professional Hair Clipper

Model No. ER-HGP82

Contents

Safety precautions...... 6

Intended use 9

Parts identification ......9

Charging 10

How to use ......11

Care....12

Troubleshooting 13

Removing the built-in rechargeable battery....14

Specifications 14

Thank you for purchasing this Panasonic product.

Before operating this unit, please read these instructions completely and save them for future use.

Warning

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• The supply cord cannot be replaced. If the cord is damaged, the AC adaptor should be scrapped.
• Do not use anything other than the supplied AC adaptor and the charging stand for any purpose. Also, do not use any other product with the supplied AC adaptor and the charging stand. (See page 9.)
• Keep the appliance dry.

- The following symbol indicates that a specific detachable power supply unit is required for connecting the electrical appliance to the supply mains. The type reference of power supply unit is marked near the symbol.

Safety precautions

To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.

Explanation of symbols

The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.

DANGER

Denotes a potential hazard that will result in serious injury or death.

WARNING

Denotes a potential hazard that could result in serious injury or death.

CAUTION

Denotes a hazard that could result in minor injury or property damage.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users to a specific operating procedure that must not be performed.

This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.

WARNING

▶ Power supply

Do not connect or disconnect the adaptor to a household outlet with a wet hand.

- Doing so may cause electric shock or injury.

Do not immerse the appliance, AC adaptor and the charging stand in water or wash it with water. Do not place the appliance, AC adaptor and the charging stand over or near water filled sink or bathtub.

Never use the appliance if the AC adaptor is damaged or if the adaptor fits loosely in a household outlet.

Do not damage or modify, or forcefully bend, pull, or twist the cord. Also, do not place anything heavy on or pinch the cord.

- Doing so may cause electric shock or fire due to a short circuit.

Do not use in a way that exceeds the rating of the household outlet or the wiring.

- Exceeding the rating by connecting too many plugs to one household outlet may cause fire due to overheating.

Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the AC adaptor. Fully insert the adaptor.

- Failure to do so may cause fire or electric shock.

Always unplug the adaptor from a household outlet when cleaning.

- Failure to do so may cause electric shock or injury.

WARNING

Regularly clean the power plug, the appliance plug, and the charging plug to prevent dust from accumulating.

- Failure to do so may cause fire due to insulation failure caused by humidity.

Disconnect the adaptor and wipe with a dry cloth.

▶ In case of an abnormality or malfunction

Immediately stop using and remove the adaptor if there is an abnormality or malfunction.

- Failure to do so may cause fire, electric shock, or injury.

- The main unit, charging stand, or AC adaptor is deformed or abnormally hot.

- The main unit, charging stand or AC adaptor smells of burning.

• There is abnormal sound during use or charging of the main unit, charging stand or AC adaptor.

- Immediately request inspection or repair at an authorized service centre.

▶ This product

This product has a built-in rechargeable battery.

Do not throw into fire, apply heat, or charge, use, or leave in a high temperature environment.

- Doing so may cause fluid leak, overheating, or explosion.

Do not modify or repair.

- Doing so may cause fire, electric shock, or injury.

Contact an authorized service centre for repair (battery change, etc.).

Never disassemble except when disposing of the product.

- Doing so may cause fire, electric shock, or injury.

▶ Preventing accidents

Do not store within the reach of children or infants. Do not let them use it.

- Putting parts or accessories in the mouth may cause an accident or injury.

If the oil is swallowed accidentally, do not induce vomiting. Drink plenty of water and consult a physician.

If the oil gets into the eyes, rinse thoroughly with running water immediately and consult a physician.

- Failure to do so may result in physical problems.

CAUTION

▶ Protecting the skin

Do not press the blade firmly against the skin.

Do not use the product for any purpose other than trimming hair.

Do not apply the blades directly to the ears or to rough skin (such as swellings, injuries, or blemishes).

- Doing so may cause injury to the ears or uneven skin.

Before use, check that the blades are not damaged or deformed.

- Failure to do so may cause skin injury.

CAUTION

▶ Note the following precautions

Do not allow metal objects or debris to adhere to the power plug, the appliance plug, or the charging plug.

- Doing so may cause electric shock or fire due to a short circuit.

Do not drop or hit against other objects.

- Doing so may cause injury.

Do not wrap the cord around the adaptor or the charging stand when storing.

- Doing so may cause the wire in the cord to break with the load, and may cause fire due to short circuit.

Disconnect the adaptor from the household outlet when not using.

- Failure to do so may cause electric shock or fire due to electrical leakage resulting from insulation deterioration.

Disconnect the adaptor or the appliance plug by holding onto the adaptor or the appliance plug instead of the cord.

- Failure to do so may cause electric shock or injury.

Handling of the removed battery when disposing

DANGER

• The rechargeable battery is exclusively for use with this appliance. Do not use the battery with other products. - Do not charge the battery after it has been removed from the product. - Do not throw into fire or apply heat. Do not hit, disassemble, modify, or puncture with a nail. - Do not let the positive and negative terminals of the battery get in contact with each other through metallic objects. - Do not carry or store the battery together with metallic jewellery such as necklaces and hairpins. - Do not use or leave the battery where it will be exposed to high temperatures, such as under direct sunlight or near other sources of heat. - Never peel off the tube. - Doing so may cause overheating, ignition, or explosion.

WARNING

After removing the rechargeable battery, do not keep it within reach of children and infants.

- The battery will harm the body if accidentally swallowed. If this happens, consult a physician immediately.

WARNING

If the battery fluid leaks out and comes in contact with the eyes, do not rub the eyes, and thoroughly rinse with clean water, such as tap water.

Failure to do so may cause eye injury.

Consult a physician immediately.

CAUTION

If the battery fluid leaks out and comes in contact with the skin or clothes, rinse off with clean water, such as tap water.

Failure to do so may cause inflammation.

Intended use

• This appliance is designed for professional use to trim hair. It can be operated on either an AC adaptor or rechargeable battery.
• Apply the lubrication oil to the blade before and after each use. (See page 13.) Failure to apply the lubrication oil may cause the following problems.
• The appliance has become blunt.
• Shorter operating time.
• Louder sound.
• The appliance may become warm during operation and/or charging. This is normal.
• Do not use any blade other than the one dedicated as it may cause defect in performance.
• You should not allow permanent wave lotion, hair dyeing or hair spray to come into contact with the main body or the blades. Doing so may result in cracking or corrosion.
• Before using an attachment, check that it has been installed correctly. Failure to do so may cause hair to be cut too short.

Parts identification

A

B

C

D

E

F G

H

7

A Main body

1 Trimming height indicator

2 Power switch

3 Dial

(Height adjustment control)

④ Recharge lamp (Green) ⑤ Charge status lamp (Red) ⑥ Appliance socket

B Blade

⑦ Mounting hook ⑧ Cleaning lever ⑨ Moving blade ⑩ Stationary blade

© 3 mm/4 mm comb attachment

D 6 mm/9 mm comb attachment

E 12 mm/15 mm comb attachment F Comb attachment shelves G Charging stand (RC9-87)

⑪ Charging plug ⑫ Stand socket

H AC adaptor (RE9-82)

⑬ Adaptor ⑭ Power plug ⑮ Cord ⑯ Appliance plug

Accessories

① Cleaning brush J Lubrication oil K Pouch

Charging

- Turn the appliance off.

1 Connect the appliance plug to the stand socket. 2 Place the appliance on the charging stand. 3 Insert the adaptor into a household outlet.

• Charging is completed after approx. 1 hour.
• Check the charge status lamp.

(●) glows.

4 Disconnect the power plug after charging is completed.

(for safety and to reduce energy usage)

• Charging is required when the recharge lamp blinks. • The appliance can be used for approximately 5 minutes after the recharge lamp blinks.

Notes

• If there is noise from the radio or other sources while using or charging the appliance, move to a different location to use the appliance.
• The battery will deteriorate if not used for over 6 months, so make sure to perform a full charge at least once every 6 months.
• The charging time may differ when using the appliance for the first time, or if it has not been used for more than 6 months. The lamp on the appliance may not glow for several minutes when first starting charging, but will glow when continuing to charge.
• Recommended ambient temperature for charging is 10°C - 35°C. It may take longer to charge, or the charge status lamp will blink quickly and the battery may fail to charge properly in extremely high or low temperatures.
• 1 full charge will provide approximately 50 minutes of continuous operation. (Based on dry using at 20°C - 30°C) The operating time may differ depending on the frequency of use and the operating method.
• The battery used is a lithium-ion, so charging after every use will have no effect on battery life.

Charging without the charging stand

1. Connect the appliance plug to the appliance socket.
2. Plug in the adaptor into a household outlet.

AC operation

If you connect the AC adaptor to the appliance in the same way as for charging, and turn on the power, you can use it.

• If the remaining battery is too low, the blades may move slowly or stop, even with the AC operation. In this case, charge the battery for 1 minute or more.
• The battery will be discharged, even with the AC operation.

How to use

• Check that the blades are not damaged or deformed before use.
• Turn the appliance off.
• Apply the lubrication oil to the blade before and after each use. (See page 13.)
• The appliance may not operate in an ambient temperature lower than approximately 5°C.

1 Set the trimming height.

2 Press the power switch to turn on the appliance.

Setting the trimming height

For a trimming height of 0.8 to 2.0 mm, turn the dial to the desired height.

Use an attachment for a trimming height higher than 3 mm or more.

Removing and mounting the comb attachments

▶ Mounting the attachment

1. Select the trimming heights indicated on the insides and sides of the attachments.
2. Set the dial to "0.8" and then mount the attachment to the main body as illustrated.

▶ Removing the attachment

Slide one side of the attachment off the mounting in the direction indicated with the arrow.

Care

Removing and mounting the blade

- Turn the appliance off.

▶ Removing the blade

Hold the main body with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

▶ Mounting the blade

1. Set the dial to "2.0".

1. Fit the mounting hook into the blade mounting on the main body and push in until it clicks.

Cleaning

• Clean the main body, blade, and the attachment after each use. (If not cleaned, the motion will become poor and the sharpness will worsen.)
• Turn the appliance off.
• Do not use thinner, benzine, alcohol or other chemicals. Doing so may cause failure, cracking or discoloration of the main body. Clean the main body only with a soft cloth slightly dampened with tap water or soapy tap water.
• Brush off any hairs from the main body and from around the blade.

1. Brush off the hairs from the blade edge.

1. Brush any hair trimmings out from between the stationary blade and the moving blade while pressing down the cleaning lever (a) to raise the moving blade.

Lubrication

- Apply the lubrication oil to the blade before and after each use.

1 Remove the blade. (See page 12.) 2 Apply a drop of the lubrication oil to each indicated point. 3 Attach the blade to the main body, turn on the power and allow to run for approximately 5 seconds.

▶ Replacement parts

Replacement part is available at your dealer or Service Centre.

Replacement parts for ER-HGP82	Blade WER9920
	Lubrication oil WES003P

• Using other than recommended genuine blade, any warranty claim will expire. • We recommend Panasonic lubrication oil WES003P.

Cleaning the charging stand

Use the cleaning brush to clean hair trimmings and dust in the charging plug or in the hole on the bottom surface.

Troubleshooting

Problem Action

The appliance has become blunt.

Operating time is short.

Appliance stopped functioning.

The appliance cannot be charged.

Makes a loud sound.

Until problems are solved, please follow each procedure as follows:

1. Charge the appliance. (See page 10.)
2. Clean the blade and apply lubrication oil. (See pages 12 and 13.)
3. Replace the blade. (See pages 12 and 13.)
4. Have the battery replaced by an authorized service centre. Push the main body into the charging stand or appliance plug all the way. Charge within the recommended charging temperature of 10 °C to 35 °C. Apply lubrication oil. (See this page.) Confirm that the blade is properly attached.

If the problems still cannot be solved, contact the store where you purchased the appliance or a service centre authorised by Panasonic for repair.

Removing the built-in rechargeable battery

Remove the built-in rechargeable battery before disposing the appliance.

Please make sure that the battery is disposed of at an officially designated location if there is one.

This figure must only be used when disposing the appliance, and must not be used to repair it. If you dismantle the appliance yourself, it may cause malfunction.

• Remove the appliance from the AC adaptor.
• Press the power switch to turn on the power and then keep the power on until the battery is completely discharged.
• Perform steps ① to ⑫ and lift the battery, and then remove it. • Take care not to short circuit the positive and negative terminals of the removed battery, and insulate the terminals by applying tape to them.

For environmental protection and recycling of materials This appliance contains a Lithium-ion battery.

Please make sure that the battery is disposed of at an officially assigned location, if there is one in your country.

Specifications

Power source	See the name plate on the AC adaptor. (Automatic voltage conversion)
Motor voltage	3.6 V---
Charging time Approx. 1 hour

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and batteries, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local authority.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

Panasonic

B

©

D

E

F

H

1

G

A Main body

Care

Cleaning

Lubrication

B

©

D

E

F

H

G

K

A Appliance body

H AC adapter (RE9-82)

⑬ Adapter ⑭ Power plug ⑮ Cord ⑯ Appliance plug

Accessories

Maintenance

How to attach and remove the blade

- Turn off the appliance.

▶ Mounting the blade

1. Set the disc to "2.0".

Cleaning

Lubrication

▶ Spare parts

Spare parts can be purchased from your dealer or service center.

Reservedele til ER-HGP82	Blad WER9920
	Smøreolie WES003P

Troubleshooting

Problem Handling

B

©

D

E

F

H

1

G

A Main body

Care

Cleaning

Lubrication

B

© D

A Main cover

H AC adapter (RE9-82)

⑬ Adapter

⑭ Plug

⑮ Power cord

⑯ Equipment plug

Accessories

① Cleaning brush

J Lubricating oil

K Bag

Charging

- Switch off the device.

1 Connect the equipment plug to the stand contact. 2 Place the device on the charging stand. 3 Insert the adapter into a power outlet.

Maintenance

Mounting the blade

1. Set the dial to "2.0".

Cleaning

Lubrication

▶ Spare parts

Spare parts are available from the dealer or a service workshop.

Reservedeler for ER-HGP82	Blad WER9920
	Smøreolje WES003P

Troubleshooting

Problem Handling

B

©

D

E

F

H

G

K

A Main part

Maintenance

Attaching the blade

Cleaning

Lubrication

Replaceable parts

Troubleshooting

Problem Solution

The device is dull.

B

© D

A Frame

Maintenance

▶ Installing the blade

Cleaning

Lubrication

▶ Spare parts

Troubleshooting

B

©

D

E

F G

H

1

K

A Korpus

Pielęgnacja

▶ Mocowanie ostrza

Czyszczenie

Smarowanie

B

©

D

E

F G

H

1

• 

A Main part

Care

▶ Attaching the blade

1. Set the scale to "2.0".

Cleaning

1. Brush hair out of the blade edge.

Lubrication

▶ Spare parts

Troubleshooting

Problem Action

B

©

D

E

F G

A Main part

Care

Removing and inserting the blade

- Switch the device off.

▶ Removing the blade

▶ Inserting the blade

Cleaning

Lubrication

- Apply lubricating oil to the blade before and after each use.

▶ Spare parts

Troubleshooting

B

©

D

E

F G

H

1

The Core

Maintenance

Cleaning

Lubrication

Troubleshooting

B

©

D

E

F

H

G

K

A Main body

H AC adapter (RE9-82)

⑬ Adapter

Care

▶ Blade installation

1. Set the dial to "2.0".

Cleaning

Lubrication

Troubleshooting

Problem Measure

B

©

D

E

F

H

G

K

A Main body

© 3 mm/4 mm comb attachment

Maintenance

▶ Attaching the blade

Cleaning

Lubrication

▶ Spare parts

Troubleshooting

Problem Action

The device has become dull.

B

Main body

Care

Cleaning

Lubrication

© Panasonic Corporation 2018

⑤ EN, SP, DA, PT, NW, SW, FI, PL, CZ, SK, HU, RO, TK, GR

Printed in Japan

ER9710HGP821E Y1218-0