Q: How to disable the fan oscillation?

To stop the oscillation of the Bimar VD220 fan, press the button (5) marked with the oscillation symbol. When you press this button: Oscillation enabled = the corresponding LED lights up Oscillation disabled = the LED turns off The oscillation works in left-right mode when the device is turned on. You can also control this function via the BIMAR Live Smart app on your smartphone if the fan is connected via Wi-Fi.

Question 1

How to disable the fan oscillation?

Accepted Answer

To stop the oscillation of the Bimar VD220 fan, press the button (5) marked with the oscillation symbol.

When you press this button:

Oscillation enabled = the corresponding LED lights up
Oscillation disabled = the LED turns off

The oscillation works in left-right mode when the device is turned on. You can also control this function via the BIMAR Live Smart app on your smartphone if the fan is connected via Wi-Fi.

Question 2

Can I put ice water in the Bimar VR25 reservoir?

Accepted Answer

Yes, you can definitely put ice water in the Bimar VR25 tank.

Here are the usage details:

Fill the reservoir with demineralized water between the minimum (1 liter) and maximum (4 liters) levels
For better cooling, insert the two reusable ice packs provided, which you should have previously frozen for about 10 hours in the freezer
Press the COOLING button to activate the water pump
At maximum capacity (4 liters), the runtime is approximately 6 hours
Only use demineralized water without additives (no oils, no detergents, etc.)

Important: the fan automatically turns off if the water level drops below the minimum, so check the reservoir regularly during use.

Question 3

How to insert and secure the rotor fixing ring?

Accepted Answer

To insert the rotor fixing ring on your Bimar VT433:

Place the fan rotor (part 10) on the motor shaft (part 5)
Slide the fixing ring (part 12) onto the shaft
Tighten it securely by screwing counterclockwise

The ring acts as a locking nut: turning it to the left keeps it tight and prevents the rotor from coming loose during operation. Make sure to tighten it well to avoid vibrations.

Question 4

How to remove or clean the protective grille of the VBOX39T?

Accepted Answer

The protective grille of the VBOX39T is a safety component that must never be removed. The manual clearly states: "Do not insert any tools or fingers between the mesh of the protective grille of the propeller".

To clean the grille

Instead of removing it, clean it in place using the recommended methods:

Always unplug the device before cleaning
Use a soft, slightly damp cloth
Avoid abrasive or corrosive products
Ensure that the ventilation holes remain free of dust

If the grille is damaged

If the grille is damaged or needs to be replaced, contact a qualified technician rather than attempting to disassemble it yourself. This could compromise safety, damage the fan, or void the warranty. For assistance: www.bimaritaly.it

Question 5

What are the names and functions of the different parts of the Bimar VC92 fan?

Accepted Answer

The Bimar VC92 fan is a tower model approximately 100 cm tall. Its main components and control elements are:

Control Panels

Standby-ON Button (1): power button that turns the fan on or off and puts it in standby mode.
Speed Control (2): three-speed selector (minimum, medium, maximum) with corresponding symbol display.
Mode Button (2): allows cycling through different operating modes, including a Sleep mode that gradually reduces speed every 30 minutes.
Oscillation Button (4): activates or deactivates the left-right sweep with a light indicator.
Timer Button (5): allows programming a running time from 1 to 8 hours in one-hour increments. The fan automatically stops when the timer expires.

The device operates via the panel buttons or a remote control (not included, requires two AAA batteries).

User manual Bimar Fan : user manuals and guides in PDF

Models Bimar Fan most viewed

Other categories Bimar

Recent questions about Fan Bimar