VP165 - Fan Bimar - Free user manual and instructions

Brand	Bimar
Model	VP165
Product type	Pedestal fan
Power supply	220-240 V ~ 50 Hz
Power consumption	63.2 W
Max airflow	76.5 m³/min
Max air speed	3.8 m/s
Sound level (Lwa)	63 dB(A)
Operation value (Sv)	1.2 (m³/min)/W
Electrical class	II (double insulation)
Number of speeds	3 (estimated)
Fan blade diameter	45 cm (estimated)
Adjustable height	Yes
Oscillating rotation	Yes
Dimensions (approx.)	H 130 × W 45 × D 45 cm
Net weight (approx.)	5.0 kg
Color	White (estimated)
Max ambient temperature	40°C
Intended use	Indoor, domestic
Maintenance	Clean with a non-abrasive damp cloth
Safety	Protective grille, automatic stop not specified
Spare parts	Contact Bimar after-sales service
Warranty	See conditions on Bimar website

Frequently Asked Questions - VP165 Bimar

How to assemble the VP165 fan?

Follow the instructions in the manual: attach the base, insert the telescopic tube, screw the motor base, then place the rear grille, blade, and front grille. Tighten all screws.

How to clean the fan?

Unplug the appliance. Use a soft, slightly damp cloth to clean the grilles and blade. Never immerse the motor or use solvents.

The fan makes an abnormal noise, what should I do?

Check that the blade is not obstructed and that the fixing screws are tight. If the noise persists, turn off and contact a qualified technician.

Can I use the fan outdoors?

No, the VP165 is exclusively designed for indoor use. Do not expose it to weather or sunlight.

How to adjust the speed?

Use the control button on the motor to choose between speeds (usually low, medium, high).

The fan does not turn on, why?

Check that the plug is properly inserted, the socket works, and the cord is not damaged. If the problem persists, have it checked by a professional.

Can I let the fan run at night?

Yes, it is designed for continuous use. Make sure it is stable and no obstacle hinders rotation.

How to maintain the power cord?

Do not pull the cord to unplug it. Avoid knots and store it without bending. If damaged, have it replaced by a professional.

Does the fan have a sleep mode?

According to technical data, standby consumption is not specified. It is recommended to unplug the appliance when not in use.

Where to find spare parts for the VP165?

Contact Bimar after-sales service via www.bimaritaly.it or from your dealer.

USER MANUAL VP165 Bimar

Black-and-white photo of a standard office fan with a circular top and stand (no text or symbols visible)

VENTILATORE A PIANTANA

FLOOR FAN

STANDVENTILATOR

VENTILATEUR À PIED

type VP165 (mod.B025-G18)

Technical line drawings of a mechanical fan assembly showing internal components and motion phases (no text or labels)

USO

Three identical black-framed office fans standing upright on white background, no text or symbols visible

Please read these instructions carefully before using the appliance, and instruct other persons using it, too, when necessary. Keep booklet Hndy for further use. If when reading this instructions manual certain parts should remain difficult to understand, or if there is any confusion, contact the company indicated on the last page before using the product.

This symbol highlights instructions and precautions for safe use. Warnings and appliance installation, use, cleaning and maintenance procedures may be updated slightly from those described in this manual; for further details, please consult the updated on-line manual at www.bimaritaly.it.

This symbol indicates that the appliance is a class II appliance. This means the plug on the power cord is not earthed.

GENERAL NOTICES

- This device is intended for home use only, to ventilate rooms, and in the manner described in this manual: do not use it for any other purpose. Any other use is to be considered inappropriate and therefore dangerous. The manufacturer cannot be held responsible for eventual damage caused by inappropriate, improper or irresponsible use and/or for repairs made to the product by unauthorised personnel.

This appliance is intended to be used in household and similar applications such as:

• staff kitchen in shops, offices and other working environments;
• farm houses
• by clients in hotels, motels and other residential type environments

• bed and breakfast type environments

• Do not touch the appliance with wet hands or feet.

• Do not insert any tool, or your fingers, into the grille protecting the blades.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

- The appliance must be kept out of children’s reach.

- Attention: when using electric appliances, the basic safety precautions must always be observed to avoid risks of fire, electric shocks and physical injury.

- Do not use the appliance if it is not operating correctly or seems damaged; if in doubt, contact professionally qualified personnel.

- Always unplug the appliance before you assemble, disassemble or make adjustments to the appliance.

- Make sure that the propeller is working correctly: if not, turn the appliance off and have it checked by professionally qualified personnel.

- Do not move the appliance when it is operating.

- Unplug the appliance when not in use.

- Do not use the device at room temperatures above 40 °C.

- Do not move the appliance when it is in function.

- Do not leave the device exposed to the weather (sun, rain, etc.).

- Do not pull on the cord to disconnect the plug from the socket.

- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

- Do not use the appliance with a timer or a programmer or with a system that can switch on the appliance automatically, to avoid risk of fire, since a fire risk exists if the heater is covered or positioned incorrectly.

- In the event of a breakdown or poor operation, turn the fan heater off and ask for professionally qualified help: repairs made by unqualified persons can be dangerous and render void the warranty.

- Ensure that the fan is switched off from the supply mains before removing the guard.

INSTALLATION

- After removing the packing materials, check the integrity of the appliance; if you are unsure, do not use it and ask for qualified professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children because they are potential sources of danger. All packaging elements must be disposed of according to their raw material (see the symbol stamped on each one) and according to the provisions of their municipality. The secondary elements of the packaging with low weight (es: packing tape) are unmarked as are its small size packing materials, the protective film of surfaces: therefore you have to follow the procedures for the disposal in force in your municipality.

Attention: any stickers or advertising material applied to the grid removed before using the appliance. The manufacturer declines all responsibility in case this is not safe working practices will be respected.

- Before connecting the appliance, check that the voltage shown on the data plate matches that of your electricity. In the event of incompatibility between the electric outlet and the plug of the appliance, have the outlet replaced with another more suitable type by professionally qualified personnel, who will make sure that the section of the wires of the outlet is appropriate for the absorbed power of the heater. In general, the use of adapters or extension cords is not recommended; if their use is indispensable, they must conform to existing safety standards and their current capacity (amperes) must not be less that the maximum of the appliance.

- The power socket must be easy to reach so the plug can be removed quickly in case of emergency.

- To not place the appliance near sinks or other container of liquids (minimum distance of 2 meters) to avoid the risk of it falling in.

- Do not place the appliance near an open flame, cooking or other heating appliance.

- Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct the air intake grille; make sure that the front is free of unstable materials (dust, etc.).

- Make sure that the electric cord is not touching rough, hot or moving surfaces and not twisted or wrapped around the appliance.

- Stand the appliance on a horizontal, flat surface; do not stand on a inclined plane (the appliance could upset).

ASSEMBLY

Attention: the fan can be used only when completely and correctly assembled, that is complete with its base and support and protection grid. If in doubt, have the appliance checked or assembled by a qualified professional person

Attention: always unplug the appliance before you assemble.

For assembly, refer to figure.

1. Screw "L" with washer
2. Counterweight
3. Base
4. Lower column
   5a) Central column_1
   5b) Central column_2
5. Upper column
6. Oscillation button
7. Body
8. Motor shaft
9. Handle
10. Rear grille
11. Grille attachnebt ring nut
12. Plastic ring
13. Fan
14. Fan attachment ring nut
15. Front grille
16. Coloumn attachment screws
17. Screw for the plastic ring
18. Switches

Upright

1. Fix the lower column (4) to the base (3) and to the counterweight (2) by inserting it into its seat, with the screw "L" with washer (1). At the end of the work, make sure that auction and the base (with counterbalance) are firmly united.
2. Unscrew all three column fixing screws (17), if the screws have been tightened.
3. Insert the central column_1 (5a) on lower column (4).
4. Insert the central column_2 (5b) on central column_1 (5a).

Ventilator

1. Position the motor body (8) on soft surface.

2. Unscrew the ring nuts: fan fixing (15) and rear grid (12) on the motor shaft.

3. Fasten the rear grid (11) to the motor body, verify that the handle appears on the upper (10) appears at the top, and position it so that the pins fit in their corresponding holes and lock it with the ring nut provided (12).

4. Insert the fan (14) on the motor shaft (9), so that the slot matches the spline. Lock with the appropriate ring nut (15) turning it tightly anti-clockwise.

5. Couple the front grid (16) with the rear grid (11) and lock with the plastic ring and ensure the fastening with the appropriate locking screw (18), (the screw must be in the lower part). Having done this, check that the protection grid is firmly coupled and fastened to the motor.

6. Attach the fan body to the stand by inserting the lower hole on the central column_2 (5b) and lock it by tightening the column attachment screw (17). At the end of the work, check that all the columns are firmly inserted correctly and all the screws (17) must be tightened fully to prevent the fan from oscillating.

Technical line drawing of a mechanical fan assembly with no visible text or symbols

Technical line drawing of a mechanical fan assembly with internal blades and mesh structure (no text or symbols)

Diagram of a folding fan with internal blades and a central hub, showing rotational motion (no text or labels)

USE

Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power cord is damaged, it must be replaced by the manufacturer or a competent qualified electrician or a person with similar qualifications, in order to avoid any risk.

Before each use, make sure the electric cord is in good condition.

Insert the plug of the fan in the power supply.

Ventilation: select the desired speed with the selector (19).

1-Minimum speed 2-Medium speed 3-Maximum speed 0-Off

To turn off, turn the switch to position 0 and then remove the plug from the socket.

Horizontal oscillation (right-left): this is selected with the button (2) located on the motor body. To stop the motion and keep the ventilator still, press the button.

Vertical inclination (high-low): it is regulated by gripping the motor body and orienting it in the direction desired.

When not in use for long periods, the plug must always be removed from the socket.

The fan can be installed at two heights depending on whether or not the middle column is or are used.

The fan can be used at several different heights (as shown in the image on the side), without using one or both of the central columns.

Three identical black-framed office fans standing upright on white background, no text or symbols visible

CLEANING AND MAINTENANCE

Attention: before normal cleaning, remove the plug from the socket.

• Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your hand in the liquid, but first remove the plug from the socket. Carefully dry the appliance and make sure that all the electrical parts are dry: in the case of doubt, ask for professionally qualified help.
• It is essential that the motor's air holes be kept from dust and lint.
• If the fan will not be used for long periods, it must be protected from dust and humidity; we recommend storing it in its original packaging.
• Should you decide not to use the appliance any more, we recommend making it inoperative by cutting the power cord (after making sure you have disconnected the plug from the socket) and make dangerous parts harmless if children are allowed to play with them (such as the blade).

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

it is advised to register the appliance on the website https://www.bimaritaly.it/it/garanzia or to scan the QR code on the side to properly register the warranty (fill out the form to activate the warranty on the product you purchased).

GB General guarantee terms

Guarantee coverage starts from the moment of purchase of the appliance as indicated by a fiscally mandatory delivery document (bill or tax receipt or shipping document). Guarantee coverage lasts 24 months and terminates after the prescribed term. Guarantee coverage covers all replacements or repairs that become necessary due to defects in material or manufacture. Guarantee coverage does not cover all those parts which become defective due to failure to comply with installation, operating or maintenance instructions, shipping damage, operating neglect or negligence, improper use or any circumstances which are not due to manufacturing defects of the appliance. Guarantee coverage is also excluded for replacement or repair of all parts subject to fair wear and tear or to expiry, as well as removable parts, light bulbs, glass components, ceramic parts, external tubes, batteries and disposable (throw-away) accessories. Replacements or repairs that come under guarantee coverage are performed free of charge for goods delivered free the Manufacturer's factory or to one of our Technical Service Centres. The Customer must only pay for shipping costs. Guarantee coverage is not granted if repairs are performed by personnel not belonging to authorized Technical Service Centres or when non-genuine spare parts are used. This warranty is governed by and construed in accordance with applicable laws in force in the country where the product is purchased. For details, contact the Customer Support in your country or the Bimar website. (www.bimaritaly.it). The Manufacturer declines all responsibility for any direct or indirect harm to persons, pets or property consequent to failure to comply with all the provisions specified in the appliance instruction booklet and especially those regarding appliance maintenance, operation, installation or warnings.