Q: How to disable the fan oscillation?

To stop the oscillation of the Bimar VD220 fan, press the button (5) marked with the oscillation symbol. When you press this button: Oscillation enabled = the corresponding LED lights up Oscillation disabled = the LED turns off The oscillation works in left-right mode when the device is turned on. You can also control this function via the BIMAR Live Smart app on your smartphone if the fan is connected via Wi-Fi.

Q: How to effectively clean the Bimar HR304 heater?

Before any cleaning , turn off the device, unplug it from the power outlet, and wait for it to cool down completely. This is essential for your safety: the quartz heating elements of the Bimar HR304 reach over 650°C during operation and remain hot long after being turned off. Cleaning the body of the device : use a soft, slightly damp cloth to wipe the exterior surface. Never use abrasive products, steel wool, solvents, or harsh detergents, as they would damage the finish and the radiation properties of the reflector. For stubborn stains, a simple damp cloth is sufficient. Cleaning the protective grille and air vents : these components are very fragile and should be cleaned exclusively with a vacuum cleaner using a brush attachment, taking care not to damage them. This is particularly important as this grille protects the incandescent quartz tubes. A standard vacuum cleaner is sufficient to remove accumulated dust. Maintenance of the quartz tubes : the two 400W quartz tubes are delicate components that should only be replaced by a qualified technician with specialized tools. If you notice that a tube is damaged or blackened, contact Bimar customer service. Do not attempt to clean them yourself. Storage and protection : when you are not using the heater, cover it and store it in a dry place. We recommend keeping it in its original packaging to effectively protect it from dust and moisture, which preserves its performance. Regular maintenance according to these recommendations ensures optimal lifespan of your Bimar HR304 heater.

Question 1

How to activate the air deflectors of the Bimar CP120?

Accepted Answer

The deflectors (air direction louvers) of the Bimar CP120 are generally adjusted via the controls located on the unit. To activate and orient the deflectors:

Locate the air direction louvers on the front of the air conditioner
Use the button or dial dedicated to the deflectors (often marked with a symbol of arrows or air)
Adjust the position of the louvers to direct the airflow in the desired direction

For precise and illustrated instructions, refer to the complete CP120 manual available for download on this page (PDF format, 64 pages).

Question 2

How to disable the fan oscillation?

Accepted Answer

To stop the oscillation of the Bimar VD220 fan, press the button (5) marked with the oscillation symbol.

When you press this button:

Oscillation enabled = the corresponding LED lights up
Oscillation disabled = the LED turns off

The oscillation works in left-right mode when the device is turned on. You can also control this function via the BIMAR Live Smart app on your smartphone if the fan is connected via Wi-Fi.

Question 3

Can I put ice water in the Bimar VR25 reservoir?

Accepted Answer

Yes, you can definitely put ice water in the Bimar VR25 tank.

Here are the usage details:

Fill the reservoir with demineralized water between the minimum (1 liter) and maximum (4 liters) levels
For better cooling, insert the two reusable ice packs provided, which you should have previously frozen for about 10 hours in the freezer
Press the COOLING button to activate the water pump
At maximum capacity (4 liters), the runtime is approximately 6 hours
Only use demineralized water without additives (no oils, no detergents, etc.)

Important: the fan automatically turns off if the water level drops below the minimum, so check the reservoir regularly during use.

Question 4

How to insert and secure the rotor fixing ring?

Accepted Answer

To insert the rotor fixing ring on your Bimar VT433:

Place the fan rotor (part 10) on the motor shaft (part 5)
Slide the fixing ring (part 12) onto the shaft
Tighten it securely by screwing counterclockwise

The ring acts as a locking nut: turning it to the left keeps it tight and prevents the rotor from coming loose during operation. Make sure to tighten it well to avoid vibrations.

Question 5

How to remove or clean the protective grille of the VBOX39T?

Accepted Answer

The protective grille of the VBOX39T is a safety component that must never be removed. The manual clearly states: "Do not insert any tools or fingers between the mesh of the protective grille of the propeller".

To clean the grille

Instead of removing it, clean it in place using the recommended methods:

Always unplug the device before cleaning
Use a soft, slightly damp cloth
Avoid abrasive or corrosive products
Ensure that the ventilation holes remain free of dust

If the grille is damaged

If the grille is damaged or needs to be replaced, contact a qualified technician rather than attempting to disassemble it yourself. This could compromise safety, damage the fan, or void the warranty. For assistance: www.bimaritaly.it

Question 6

How to obtain the Bimar B400 oven manual in Portuguese?

Accepted Answer

The Bimar B400 oven manual is not available in Portuguese on this page. Currently, 5 languages are offered directly: French, German, English, Spanish, and Italian.

However, a simple solution exists: the platform offers a translation on demand option. You can indicate your preference for Portuguese by filling out the custom translation request form available on the page. You will then receive a translated version by email.

In the meantime, you can consult the manual in Spanish (very close to Portuguese) or in French to understand the main features of the oven: the 31 preset programs, cooking modes (steam, traditional, combined, air frying), and basic controls (ON/Standby buttons, child lock, selection knob).

Question 7

What are the names and functions of the different parts of the Bimar VC92 fan?

Accepted Answer

The Bimar VC92 fan is a tower model approximately 100 cm tall. Its main components and control elements are:

Control Panels

Standby-ON Button (1): power button that turns the fan on or off and puts it in standby mode.
Speed Control (2): three-speed selector (minimum, medium, maximum) with corresponding symbol display.
Mode Button (2): allows cycling through different operating modes, including a Sleep mode that gradually reduces speed every 30 minutes.
Oscillation Button (4): activates or deactivates the left-right sweep with a light indicator.
Timer Button (5): allows programming a running time from 1 to 8 hours in one-hour increments. The fan automatically stops when the timer expires.

The device operates via the panel buttons or a remote control (not included, requires two AAA batteries).

Question 8

How to effectively clean the Bimar HR304 heater?

Accepted Answer

Before any cleaning, turn off the device, unplug it from the power outlet, and wait for it to cool down completely. This is essential for your safety: the quartz heating elements of the Bimar HR304 reach over 650°C during operation and remain hot long after being turned off.

Cleaning the body of the device: use a soft, slightly damp cloth to wipe the exterior surface. Never use abrasive products, steel wool, solvents, or harsh detergents, as they would damage the finish and the radiation properties of the reflector. For stubborn stains, a simple damp cloth is sufficient.

Cleaning the protective grille and air vents: these components are very fragile and should be cleaned exclusively with a vacuum cleaner using a brush attachment, taking care not to damage them. This is particularly important as this grille protects the incandescent quartz tubes. A standard vacuum cleaner is sufficient to remove accumulated dust.

Maintenance of the quartz tubes: the two 400W quartz tubes are delicate components that should only be replaced by a qualified technician with specialized tools. If you notice that a tube is damaged or blackened, contact Bimar customer service. Do not attempt to clean them yourself.

Storage and protection: when you are not using the heater, cover it and store it in a dry place. We recommend keeping it in its original packaging to effectively protect it from dust and moisture, which preserves its performance. Regular maintenance according to these recommendations ensures optimal lifespan of your Bimar HR304 heater.

User manual Bimar : user manuals and guides in PDF

Models Bimar most viewed

Browse manuals Bimar by appliance type

Recent questions about devices Bimar