HC514 - Heating Bimar - Free user manual and instructions
Find the device manual for free HC514 Bimar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Inertia Heater |
| Brand | Bimar |
| Model | HC514 |
| Dimensions (W x H x D) | 600 x 400 x 200 mm |
| Weight | 12 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Maximum Power | 2000 W |
| Main Functions | Adjustable thermostat, 3 heat settings (low, medium, high), frost protection mode, programmable timer |
| Maintenance and Cleaning | Clean with a soft, damp cloth; do not use abrasive products; do not immerse in water |
| Safety | Anti-tip safety, overheat protection, thermal fuse |
| Spare Parts and Repairability | Spare parts available (thermostat, casters, power cord); repair by a qualified professional |
| General Information | White color, 2-year warranty, suitable for rooms up to 25 m² |
Frequently Asked Questions - HC514 Bimar
How to adjust the temperature on the Bimar HC514 heater?
Use the rotary thermostat on the control panel. Turn it clockwise to increase the temperature and counterclockwise to decrease it. Refer to the manual for precise settings.
What to do if the heater does not turn on?
First check that the appliance is plugged into a working power outlet. Make sure the main switch is in the on position. If the problem persists, check the thermal fuse and contact an after-sales service.
How to clean the heater?
Unplug the appliance and let it cool down. Use a soft, slightly damp cloth to wipe the body. Do not use chemical or abrasive products and never immerse the heater in water.
Does the heater have a frost protection function?
Yes, the Bimar HC514 is equipped with a frost protection mode that maintains a minimum temperature of 7°C to prevent freezing in the room. Activate this function by turning the thermostat to the frost protection position (often marked with a snowflake).
Can I use the heater in a bathroom?
The Bimar HC514 can be used in a bathroom if placed more than 60 cm from a water source and properly installed. Check the IP rating; typically this model is IP24 (protected against water splashes).
How to program the timer?
Press the timer button to activate programming mode. Use the + and - buttons to set the desired duration (from 1 to 12 hours). The appliance will turn off automatically after the programmed time.
What to do in case of overheating?
The heater is equipped with overheat protection. If it shuts off automatically, unplug it, let it cool down for at least 30 minutes, then check that the air intakes are not blocked. Plug it back in and if the problem persists, contact a repair technician.
How to change the casters?
Carefully tilt the heater on its side. The casters are attached with clips or screws. Remove the old casters and attach the new ones following the installation direction in the manual. Set the heater upright.
The heater makes a clicking noise, is this normal?
A slight clicking may occur during heating (expansion of materials). This is normal. If the noise is loud or persistent, check that the heater is level and stable.
Where to find spare parts for the HC514?
Spare parts are available from Bimar after-sales service or authorized dealers. You can also visit the Bimar website to order parts such as the thermostat, casters, or power cord.
User questions about HC514 Bimar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HC514 - Bimar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HC514 by Bimar.
USER MANUAL HC514 Bimar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bimar
Model : HC514
Category : Heating