My car radio's Bluetooth says connected but there's no sound

Question

Accepted Answer

Audio problem despite an established Bluetooth connection

If your phone indicates that it is connected to the Bluetooth of the Auna MD210 BT but no sound is coming from the speakers, here are the checks to make:

1. Check that the device is in Bluetooth mode

Make sure that the car radio has switched its input source to Bluetooth. The indicator light or display should show that the "Bluetooth" mode is activated (and not another mode like USB, SD, AUX, or radio).

2. Start the music on your phone

Once paired via Bluetooth, it is your phone that sends the music. Explicitly start a song, a playlist, or a video on your phone - the sound should then come out of the car radio's speakers (4 x 50W).

3. Check the volumes

Three volumes need to be turned up:

The volume of the Auna MD210 BT car radio itself
The volume of your phone
The music application on your phone (some have an internal volume slider)

Also, check that neither the car radio nor the phone is in silent mode.

4. Reset the Bluetooth pairing

If the problem persists:

On your phone, go to Bluetooth settings and select "Forget device" for the Auna MD210 BT
Press the Bluetooth button on the car radio to restart the pairing
Select "Auna MD210 BT" again from your phone's Bluetooth list

After these steps, the sound should work properly.

User manual Auna Car radio : user manuals and guides in PDF

Models Auna Car radio most viewed

Other categories Auna

Recent questions about Car radio Auna