User manual SCHEPPACH Vacuum Cleaner : 31 free PDF user manuals

Q: Where is the compartment to install the filter on the SCHEPPACH SPRAYVAC20 vacuum cleaner?

On your SCHEPPACH SPRAYVAC20 vacuum cleaner, the filter compartment is located in the machine head with filter basket (part 3) which is attached above the 20-liter stainless steel tank. This filter basket is held in place by two locking hooks located on the sides of the tank. Your SPRAYVAC20 comes with several types of filters depending on the intended use: Foam filter (part 33) : included in the delivery, mandatory for wet vacuuming Paper filter bag (part 34) : included in the delivery, recommended for fine and dry vacuuming HEPA pleated filter (part 31) : optional, for enhanced filtration To access the filter compartment and install the foam filter: Release the two locking hooks (part 8) located on the sides of the machine head Lift and remove the machine head with the filter basket upwards Turn the filter basket counterclockwise to open it Using a screwdriver, remove the clip cap at the bottom of the basket Slide the dry foam filter over the filter basket with its safety valve (part 3c) Replace the cap Reinsert the filter basket by turning it clockwise until it clicks into place Reposition the machine head on the tank and tighten the two locking hooks Important: Never use the device without a filter in place. For wet vacuuming, only use the provided foam filter (33). The filter must always be dry when inserted to avoid tearing. When installing, slightly fold the edge of the filter, then unroll it to its final position for a secure fit.

Q: How to use the SCHEPPACH SPRAYVAC20 vacuum cleaner?

To effectively use the SCHEPPACH SPRAYVAC20 vacuum cleaner, follow these steps: 1. Preparing the device Make sure the vacuum cleaner is properly assembled with all accessories in place. Check that the dust container is empty and securely attached. 2. Connection Plug the device into an electrical outlet that matches the voltage indicated on the device. 3. Selecting the operating mode The SPRAYVAC20 combines vacuuming and spraying. Select the appropriate mode according to your needs: Vacuum only: to vacuum dust and debris. Spraying: fill the tank with cleaning liquid and activate the spraying function for wet cleaning. 4. Usage Point the nozzle at the surface to be cleaned. Press the power button to start vacuuming. For the spraying function, ensure the tank is filled and activate the spraying before vacuuming. Move the device slowly for effective cleaning. 5. Maintenance after use Turn off and unplug the device. Empty the dust container and the liquid tank if used. Clean the filters and accessories to maintain the device's performance. By following these steps, you will optimize the use and lifespan of your SCHEPPACH SPRAYVAC20 vacuum cleaner.

Models SCHEPPACH Vacuum Cleaner most viewed

User manual SCHEPPACH Vacuum Cleaner : user manuals and guides in PDF

Models SCHEPPACH Vacuum Cleaner most viewed

Other categories SCHEPPACH

Recent questions about Vacuum Cleaner SCHEPPACH