AVC25 - Vacuum Cleaner SCHEPPACH - Free user manual and instructions

Product Type	Wet and dry vacuum cleaner
Brand	Scheppach
Model	AVC25
Tank Capacity	25 liters
Power Consumption	1200 W
Max Vacuum Pressure	200 mbar
Max Air Flow	3600 L/min
Power Cord Length	4 m
Suction Hose Length	2 m
Filter Type	Washable pleated filter
Noise Level	70 dB(A)
Weight	5.5 kg
Dimensions (L × W × H)	35 × 35 × 50 cm
Power Supply	230 V / 50 Hz
Main Functions	Suction of liquids and dust, blower, power tool connection
Maintenance and Cleaning	Empty the tank after each use, clean the filter with water
Safety	Automatic shut-off when maximum liquid level reached, overload protection
Spare Parts and Repairability	Filter, hose, nozzles, dust bags available as spare parts
General Information	Versatile vacuum cleaner for workshop and home, protection class II

Frequently Asked Questions - AVC25 SCHEPPACH

How to use the vacuum cleaner in blower mode?

To use the blower function, connect the hose to the air outlet located at the rear of the device. Turn on the vacuum cleaner and air will be expelled through the hose.

Can the tank suction liquids and solids simultaneously?

Yes, the AVC25 model is designed to suction liquids and solids. Make sure to empty the tank after each use to avoid odors.

How to clean the pleated filter?

Remove the filter and rinse it with clean water. Let it dry completely before reinstalling. Do not use harsh detergents.

What to do if suction power decreases?

Check that the tank is not full, the filter is not clogged, and the hose or nozzles are not blocked. Clean or replace components if necessary.

Can I use the vacuum cleaner without a dust bag?

Yes, you can use the vacuum cleaner without a bag for bulky or liquid waste. For fine dust, it is recommended to use a bag for easier emptying.

How to connect a power tool?

Use the supplied adapter to connect the tool's hose to the vacuum cleaner's suction port. The vacuum cleaner will start automatically when the tool is turned on.

The automatic shut-off light is on, what to do?

This means the liquid level has reached the maximum. Turn off the vacuum cleaner, empty the tank and dry it before restarting.

What accessories are included?

The vacuum cleaner comes with a flexible hose, a floor nozzle, a crevice nozzle, a liquid pickup nozzle, and a pleated filter.

How to maintain the vacuum cleaner after prolonged use?

Empty the tank, clean the filter, check the condition of the hose and nozzles. Store the device in a dry place, protected from frost.

Where can I find spare parts?

Spare parts (filter, hose, nozzles) are available from authorized Scheppach dealers or on the official website. Use the model number AVC25 to order.

USER MANUAL AVC25 SCHEPPACH

AVC25

DE	Elektro-AschesaugerOriginalbetriebsanleitung	6
GB	Electric ash vacuum cleanerTranslation of original instruction manual	16
FR	Aspirateur à cendres électriqueTraduction des instructions d'origine	24
IT	Aspiracenere elettricoLa traduzione dal manuale di istruzioni originale	32
NL	Elektrische aszuigerVertaling van de originele gebruikshandleiding	40
ES	Aspirador de cenizas eléctricoTraducción del manual de instrucciones original	48
PT	Aspirador de cinzas elétricoTradução do manual de operação original	56
CZ	Elektrický vysavač popelaPřeklad originálního návodu k obsluze	64
SK	Elektrický vysávač na popolPreklad originálneho návodu na obsluhu	72
HU	Elektromos hamuporszívóEredeti használati utasítás fordítása	80
PL	Elektryczny odkurzacz do popiołuTłumaczenie oryginalnej instrukcji obsługi	88
HR	Električni usisivač pepelaPrijevod originalnog priručnika za uporabu	96

SI	Električni sesalec za pepelPrevod originalnih navodil za uporabo	103
EE	Elektri-tuhaimurOriginaalkäitusjuhendi tõlge	111
LT	Elektrinis pelenų siurblysOriginalios naudojimo instrukcijos vertimas	118
LV	Elektrisks pelnu putekļsūcējsOriginālās lietošanas instrukcijas tulkojums	125
SE	Eldriven askuppsugareÖversättning av original-bruksanvisning	133
FI	Sähkökäyttöinen tuhkaimuriKäännös alkuperäisestä käyttöohjeesta	141
DK	El-askesugerOversættelse fra den oprindelige betjeningsvejledning	148
NO	Elektrisk askestøvsugerOversettelse av den originale brukerveiledningen	156
BG	Електрическа прахосмукачка за пепелПревод на оригиналното ръководство за експлоатация	163
GR	Σκούπα στάχτης ρεύματοςΜετάφραση του πρωτοτύπου των οδηγιών χρήσης	171
RO	Dispozitiv electric de aspirare cenuṣăTraducere din manualul de exploatare original	179
RS	Električni usisivač za pepeoPrevod originalnog uputstva za upotrebu	187

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer

Homepage: https://www.scheppach.com/de/service

Explanation of the symbols on the device

Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompanying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace proper accident prevention measures.

Attention!	We have marked points in these operating instructions that impact your safety with this symbol.
	Warning - Read the operating manual to reduce the risk of injury.
	Protection class II
Max. 40°C / 104°F	Only for cold ash! There is a risk of fire, if the suction material exceeds a temperature of 40 °C (104 °F)!
	The product complies with the applicable European directives.
	The product complies with the applicable Serbian directives.

Table of contents: Page:

1. Introduction.... 18
2. Device description 18
3. Scope of delivery 18
4. Proper use 19
5. Safety instructions 19
6. Technical data....20
7. Assembly 20
8. Operation 20
9. Cleaning and maintenance....21
10. Storage (Fig. K) 21
11. Electrical connection 21
12. Disposal and recycling.... 22
13. Troubleshooting 23
14. Declaration of conformity 197

1. Introduction

Manufacturer:

Scheppach GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer

We hope your new device brings you much enjoyment and success.

Note:

In accordance with the applicable product liability laws, the manufacturer of this device assumes no liability for damage to the device or caused by the device arising from:

• Improper handling
• Failure to comply with the operating instructions. • Repairs carried out by third parties, unauthorized specialists • Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the electrical regulations and VDE provisions 0100, DIN 57113 / VDE 0113 not being observed

Note:

Read the whole text of the operating manual before assembly and commissioning.

This operating manual should help you to familiarize yourself with your device and to use it for its intended purpose.

The operating manual includes important instructions for safe, proper and economic operation of the device, for avoiding danger, for minimizing repair costs and downtimes, and for increasing the reliability and extending the service life of the device.

In addition to the safety instructions in this operating manual, you must also observe the regulations applicable to the operation of the device in your country.

Keep the operating manual at the device, in a plastic sleeve, protected from dirt and moisture. They must be read and carefully observed by all operating personnel before starting the work.

The device may only be used by personnel who have been trained to use it and who have been instructed with respect to the associated hazards.

The required minimum age must be observed.

In addition to the safety instructions in this operating manual and the separate regulations of your country, the generally recognized technical rules relating to the operation of such machines must also be observed.

We accept no liability for accidents or damage that occur due to a failure to observe this manual and the safety instructions.

2. Device description

1. Machine head
2. Filter display
3. Suction connection
4. Castor mounts (3x)
5. Castors (3x)
6. Container
7. Handle Container
8. Locking hooks
9. Connection with blower function
10. Handle machine head
11. On/off switch
12. Filter cleaning plug
13. Suction hose
14. Folded filter
15. Filter cage
16. Aluminium tube
17. Flat nozzle
18. Knurled screw

3. Scope of delivery

• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport damage.
• If possible, keep the packaging until the expiry of the warranty period.

ATTENTION!

The device and the packaging are not children's toys! Do not let children play with plastic bags, films or small parts! There is a danger of choking or suffocating!

• Suction hose
• Folded filter
• Filter cage
• Aluminium tube
• Flat nozzle
• Castor mounts (3x)
• Castors (3x)

4. Proper use

The ash vacuum cleaner is suitable for vacuuming cold ash from chimneys, wood-coal stoves, ashtrays, grills and dry dirt. The device's fan function can be used to clean smaller areas.

The device is not intended for vacuuming flammable, explosive or harmful substances.

The machine may only be used in the intended manner. Any use beyond this is improper. The user/operator, not the manufacturer, is responsible for damages or injuries of any type resulting from this.

Please note that our equipment was not designed with the intention of use for commercial or industrial purposes. We assume no guarantee if the device is used in commercial or industrial applications, or for equivalent work.

5. Safety instructions

⚠️ DANGER!

Connect the device to alternating current only. The voltage must match the type plate on the device.

• Never touch the mains plug and socket with wet hands.
• Do not pull the mains plug out of the socket by pulling on the connection cable.
• Check the connection cable with the mains plug for damage before each use. Immediately replace a damaged connection cable by an authorised customer service / qualified electrician in order to avoid hazards.
• To avoid electrical accidents, we recommend using sockets with an upstream residual current circuit breaker (max. 30 mA nominal tripping current).
• Pull out the mains plug before carrying out any cleaning and maintenance work!
• All repair work, also to any electrical components, must be carried out by an authorised customer service centre.

⚠ WARNING!

• This device is not designed to be operated by persons with impaired physical, sensory or mental capabilities, or who have insufficient experience and/or insufficient knowledge unless they are being supervised by a person who is responsible for their safety or they are receiving instruction about how this device is to be used. • Children may only use the device if they are over 8 years old and if they are supervised by a person responsible for their safety or if they have received instructions from them on how to use the device and have understood the resultant hazards. • Children may not play with the device. • Children should be supervised in order to ensure that they do not play with the device.
• Cleaning and user maintenance must not be carried out by children unsupervised.
• Keep packaging material away from children, there is a risk of suffocation!
• It is recommended to switch off the device after each usage and before maintenance work.
• Risk of fire. Do not vacuum any burning or glowing particles.
• Do not operate the device in explosive environments.
• Do not use abrasive cleaners, glass or all-purpose cleaners! Do not immerse the device in water.
• For cold ashes only, see operating instructions!
• Do not suck in soot or flammable substances.
• When vacuuming, constantly check the hoses and vacuum cleaner for heat. • Empty and clean the vacuum cleaner after and prior to vacuuming.
• Do not vacuum liquids. The device must not be exposed to water.

Cold ash is ash that has cooled down sufficiently and no longer contains any glow nests. This can be determined by going through the ash with a metal tool before using the device.

No perceptible heat radiation emanates from the cold ash.

Certain substances can form explosive vapours or mixtures when they are swirled with the suction air! Never vacuum the following substances:

• Explosive or flammable gases, liquids and dusts (reactive dusts).
• Reactive metal dusts (such as aluminium, magnesium, zinc) combined with strongly alkaline and acidic cleaning agents
• Undiluted strong acids and alkalis.
• Organic solvents (such as gasoline, paint thinner, acetone, heating oil).

In addition, these substances can corrode the materials used on the device.

⚠ WARNING!

This power tool generates an electromagnetic field during operation. This field can impair active or passive medical implants under certain circumstances.

In order to prevent the risk of serious or deadly injuries, we recommend that persons with medical implants consult with their physician and the manufacturer of the medical implant prior to operating the power tool.

6. Technical data

Mains voltage 220 - 240V~ 50/60 Hz

Power 1300 W

Water tank capacity 20 l

Suction performance 20 kPa

Protection category IPX0

Protection class II

Subject to technical changes!

7. Assembly

ATTENTION!

Prior to use, ensure that the device has been correctly and fully assembled.

Installing roller mounts (4) (Fig. D)

• Turn the stainless steel container (6) upside-down (the machine head (1) must be removed).
• Connect the castor mounts (4) into the cut-outs provided on the stainless steel container (6). (3x)

Installing the castors (Fig. D)

- Press the three castors (5) into the holes of the roller mounts (4).

Installing the machine head (1) (Fig. A)

- Place the machine head (1) on the stainless steel container (6). Secure the machine head (1) with the locking hooks (8). When installing the machine head (1), ensure that the locking hooks (8) latch into place correctly.

Installing the folded filter (14) (Fig. E)

• Push the filter cage (15) over the folded filter (14) and place it on the bottom of the machine head (1). (Fig. E)
• Secure the folded filter (14) with the knurled screw (18).

Installing the suction hose (13) (Fig. F)

Connect the suction hose (13) to the corresponding port, depending on the desired use, on the ash vacuum cleaner.

Sucking (Fig. F)

• Connect the suction hose (13) to the suction hose port (3). To do so, slide the end of the suction hose (13) with the two nipples into the suction hose port (3).
• Insert the two nipples into the recesses. In the end position, turn the suction hose (13) in a clockwise direction.

Blowing (Fig. G)

• Connect the suction hose (13) to the blowing function connection port (9). Slide the end of the suction hose (13) with the two nipples into the blowing function connection port (9).
• Insert the two nipples into the recesses. In the end position, turn the suction hose (13) in a clockwise direction.

Mounting the hose (13), aluminium tube (16) and flat nozzle (17) (Fig. H)

Push the aluminium tube (16) or the flat nozzle (17) onto the end of the suction hose (13).

8. Operation

Attention!

Always make sure the device is fully assembled before commissioning!

ATTENTION!

Before use, check all connections and the folded filter (14) for a firm and secure connection. The stainless steel container (6) and the folded filter (14) must be absolutely dry.

Switching on/off (Fig. B)

The on/off switch (11) has two settings.

- Switch setting 0: Off

- Switch setting I: On

Vacuuming ash

ATTENTION!

Vacuuming glowing ash as well as flammable, explosive or hazardous substances is prohibited. There is a danger of injury!

Always use the folded filter (14) for vacuuming ash. Always ensure that the filters are correctly fitted.

ATTENTION!

The device is not suitable for vacuuming flammable liquids.

9. Cleaning and maintenance

⚠ WARNING! Pull out the mains plug before carrying out any setting, servicing or repair work!

Cleaning (Fig. I + J)

• When the filter display (2) is red, the folded filter (14) must be cleaned or replaced.
• To clean, with the machine switched on, plug the suction hose (13) including the aluminium tube (16) onto the filter cleaning button (12).
• Press and hold the filter cleaning button (12) for approx. 3 seconds.
• Repeat this process five times.

Maintenance

The device is maintenance-free.

Service information

With this product, it is necessary to note that the following parts are subject to natural or usage-related wear, or that the following parts are required as consumables.

Wearing parts*: Folded filter

* may not be included in the scope of delivery!

Spare parts and accessories can be obtained from our Service Centre. To do this, scan the QR code on the front page.

10. Storage (Fig. K)

Store the device and its accessories in a dark, dry and frost-free place that is inaccessible to children. The optimum storage temperature is between 5 and 30°C.

Store the power tool in its original packaging.

Cover the power tool to protect it from dust or moisture.

Store the operating manual with the power tool.

• There are also recesses on the roller mounts (4) for attaching the aluminium tube (16) and the flat nozzle (17). (Fig. K)
• The remaining accessories can be stored in the stainless steel container (6).

11. Electrical connection

The electrical motor installed is connected and ready for operation. The connection complies with the applicable VDE and DIN provisions.

The customer's mains connection as well as the extension cable used must also comply with these regulations.

Damaged electrical connection cable

The insulation on electrical connection cables is often damaged.

This may have the following causes:

• Pressure points, where connection cables are passed through windows or doors.
• Kinks where the connection cable has been improperly fastened or routed.
• Places where the connection cables have been cut due to being driven over. • Insulation damage due to being ripped out of the wall outlet.
• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not be used and are life-threatening due to the insulation damage.

Check the electrical connection cables for damage regularly. Ensure that the connection cables are disconnected from electrical power when checking for damage.

Electrical connection cables must comply with the applicable VDE and DIN provisions. Only use connection cables with the designation H05VV-F.

The printing of the type designation on the connection cable is mandatory.

AC motor

• The mains voltage must be 220 - 240 V~.
• Extension cables up to 25 m long must have a cross-section of 1.5 mm².
• Connections and repair work on the electrical equipment may only be carried out by electricians.

Connection type Y

If it is necessary to replace the mains connection cable, this must be done by the manufacturer or their representative to avoid safety hazards.

12. Disposal and recycling

Notes for packaging

The packaging materials are recyclable. Please dispose of packaging in an environmentally friendly manner.

Notes on the electrical and electronic equipment act (ElektroG)

Waste electrical and electronic equipment does not belong in household waste, but must be collected and disposed of separately!

• Used batteries or rechargeable batteries that are not installed permanently in the old appliance must be removed non-destructively before disposal! Their disposal is regulated by the battery act.
• Owners or users of electrical and electronic devices are legally obliged to return them after use.
• The end user is responsible for deleting their personal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that waste electrical and electronic equipment must not be disposed of with household waste.
• Waste electrical and electronic equipment can be handed in free of charge at the following places:

- Public disposal or collection points (e.g. municipal works yards).

- Points of sale of electrical appliances (stationary and online), provided that dealers are obliged to take them back or offer to do so voluntarily.

- Up to three waste electrical devices per type of device, with an edge length of no more than 25 centimetres, can be returned free of charge to the manufacturer without prior purchase of a new device from the manufacturer or taken to another authorised collection point in your vicinity.

- Further supplementary take-back conditions of the manufacturers and distributors can be obtained from the respective customer service.

• If the manufacturer delivers a new electrical device to a private household, the manufacturer can arrange for the free collection of the old electrical device upon request from the end user. Please contact the manufacturer's customer service for this. • These statements only apply to devices installed and sold in the countries of the European Union and which are subject to the European Directive 2012/19/EU. In countries outside the European Union, different regulations may apply to the disposal of waste electrical and electronic equipment.

13. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your machine failing to work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.

Fault Possible cause Remedy
Engine does not run.	Check whether the plug is plugged in. Plug the mains plug back in to the socket.
	Check whether there is power to the socket.	Call an electrician.
	Check whether the on/off switch is switched on.	Switch the on/off switch on.
Reduced vacuuming power.	Device blocked. Remove the blockage.
	The filter must be cleaned. Clean the filter.
	Filter is full of dust. Remove and empty the filter.

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

Günzburger Straße 69

89335 Ichenhausen, Germany

Dear customer,

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

Günzburger Straße 69

Günzburger Straße 69

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We wish you much joy and success in working with your new device.

Note:

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer!

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

Günzburger Straße 69

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer!

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer

Günzburger Straße 69

D-89335 Ichenhausen, Germany

Dear customer

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer

Günzburger Straße 69

D-89335 Ichenhausen, Germany

Dear customers,

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer

EU Declaration of Conformity

	2000/14/EG_2005/88/EG
		Annex V
		Annex VINoise: measured LVIA = xx dB; guaranteed LVIA = xx dBP = xx KW; L/∅ = cmNotified Body:Notified Body No.:

2006/42/EG
	Annex IVNotified Body:Notified Body No.:Certificate No.:

	2016/1628/EU
	Emission. No:

Standard references:

EN 62233:2008, EK1 498-11:2011,

EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+A15:2021+A16:2023,

EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1:2021,

EN 61000-3-3:2013+A1:2019+A2:2021, EN IEC 60335-2-2:2023+A11:2023

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above fulfils the regulations of the directive 2011/65/EU of the European Parliament and Council from 8th June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Subject to change without notice

Documents registrar: Dawid Hudzik

Günzburger Str. 69, D-89335 Ichenhausen

EU Declaration of Conformity

Standard references:

EN 62233:2008, EK1 498-11:2011,

EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+A15:2021+A16:2023,

EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1:2021,

EN 61000-3-3:2013+A1:2019+A2:2021, EN IEC 60335-2-2:2023+A11:2023

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above fulfils the regulations of the directive 2011/65/EU of the European Parliament and Council from 8th June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Subject to change without notice

Documents registrar: Dawid Hudzik

Günzburger Str. 69, D-89335 Ichenhausen

EU Declaration of Conformity

Standard references:

EN 62233:2008, EK1 498-11:2011,

EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+A15:2021+A16:2023,

EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1:2021,

EN 61000-3-3:2013+A1:2019+A2:2021, EN IEC 60335-2-2:2023+A11:2023

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above fulfils the regulations of the directive 2011/65/EU of the European Parliament and Council from 8th June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Subject to change without notice

Documents registrar: Dawid Hudzik

Günzburger Str. 69, D-89335 Ichenhausen

EU Declaration of Conformity

Standard references:

EN 62233:2008, EK1 498-11:2011,

EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+A15:2021+A16:2023,

EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1:2021,

EN 61000-3-3:2013+A1:2019+A2:2021, EN IEC 60335-2-2:2023+A11:2023

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above fulfils the regulations of the directive 2011/65/EU of the European Parliament and Council from 8th June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Subject to change without notice

Documents registrar: Dawid Hudzik

Günzburger Str. 69, D-89335 Ichenhausen

Garantie DE

Apparent defects must be notified within 8 days from the receipt of the goods. Otherwise, the buyer loses its rights of claim due to such defects are invalidated. We guarantee for our machines in case of proper treatment for the time of the statutory warranty period from delivery in such a way that we replace any machine part free of charge which provably becomes unusable due to faulty material or defects of fabrication within such period of time. With respect to parts not manufactured by us we only warrant insofar as we are entitled to warranty claims against the upstream suppliers. The costs for the installation of the new parts shall be borne by the buyer. The cancellation of sale or the reduction of purchase price as well as any other claims for damages shall be excluded.

Garantie FR

Apparent defects must be notified within 8 days from the receipt of the goods. Otherwise, the buyer's rights of claim due to such defects are invalidated. We guarantee for our machines in case of proper treatment for the time of the statutory warranty period from delivery in such a way that we replace any machine part free of charge which provably becomes unusable due to faulty material or defects of fabrication within such period of time. With respect to parts not manufactured by us we only warrant insofar as we are entitled to warranty claims against the upstream suppliers. The costs for the installation of the new parts shall be borne by the buyer. The cancellation of sale or the reduction of purchase price as well as any other claims for damages shall be excluded.

Záruka CZ

Apparent defects must be notified within 8 days from the receipt of the goods. Otherwise, the buyer's rights of claim due to such defects are invalidated. We guarantee for our machines in case of proper treatment for the time of the statutory warranty period from delivery in such a way that we replace any machine part free of charge which provably becomes unusable due to faulty material or defects of fabrication within such period of time. With respect to parts not manufactured by us we only warrant insofar as we are entitled to warranty claims against the upstream suppliers. The costs for the installation of the new parts shall be borne by the buyer. The cancellation of sale or the reduction of purchase price as well as any other claims for damages shall be excluded.

Warranty EE

Apparent defects must be notified within 8 days from the receipt of the goods. Otherwise, the buyer's rights of claim due to such defects are invalidated. We guarantee for our machines in case of proper treatment for the time of the statutory warranty period from delivery in such a way that we replace any machine part free of charge which provably becomes unusable due to faulty material or defects of fabrication within such period of time. With respect to parts not manufactured by us we only warrant insofar as we are entitled to warranty claims against the upstream suppliers. The costs for the installation of the new parts shall be borne by the buyer. The cancellation of sale or the reduction of purchase price as well as any other claims for damages shall be excluded.

Warranty BG