How to change the head of a SCHEPPACH DS920 drywall sander and is it compatible with the triangular head of the DS930 model?

Question

Accepted Answer

The SCHEPPACH DS930 drywall sander does indeed offer the possibility to change the round head for a triangular head, which is useful for accessing corners and difficult surfaces.

Regarding the DS920, although the two models are similar, it is important to note that the head attachment mechanism may differ between them. Here are some points to consider:

Head compatibility: Round and triangular heads are not always interchangeable between different models, even from the same brand. You need to check if the triangular head from the DS930 is physically compatible with the attachment system of the DS920.
Changing mechanism: The attachment system (for example, by screws, clips, or other means) may vary. The DS930 may have a simpler or different mechanism for changing the head.

To change the head on the DS920, you generally need to:

Detach the current head by unscrewing or unclipping according to the system.
Attach the new head while respecting the orientation and locking mechanism.

If you wish to use a triangular head, it is advisable to:

Check with SCHEPPACH customer service or an authorized dealer for the availability of a triangular head compatible with the DS920 model.
Compare the physical attachments of the two models to ensure compatibility.

In summary, while the DS930 easily allows this change, the DS920 may not have the same functionality or compatibility. Therefore, it is wise to confirm before purchasing a triangular head intended for the DS930 to use on a DS920.

User manual SCHEPPACH Plaster sander : user manuals and guides in PDF

Models SCHEPPACH Plaster sander most viewed

Other categories SCHEPPACH

Recent questions about Plaster sander SCHEPPACH