Question 1

Where can I find the parts diagram (exploded view) for the HiKOKI C10RJ saw to order spare parts?

Accepted Answer

The detailed spare parts diagram (exploded view) for the HiKOKI C10RJ saw is included in the manual through two key documents:

1. Figure 2 - Parts included in the packaging: This figure lists the 22 items provided with the machine (assemblies, accessories, and tools): mobile table saw (A), stand (B), guard blade assembly (C), anti-kickback claws (D), output support assembly (E), rip fence (F), stop (G), support chassis assembly (H), wheel shaft (I), wheel (J), foot assembly (K), handle assembly (L), screws M8 x 45 (M), lock nuts (N-R), hex keys (T-V), and other screws. Refer to this figure to identify the exact references and quantities when restocking.

2. Internal exploded diagram: The manual contains a detailed diagram numbered from 1 to 49 that identifies all internal and external components of the machine (blade, bearings, handles, locking levers, cutting guides, switches, etc.). Each part has a reference number that allows you to order exactly what you need.

Ordering procedure:

Locate the faulty component on one of the two diagrams in the HiKOKI C10RJ manual
Note the exact reference number (for example: blade ø254 mm × ø30 mm, screw M8 x 45, lock nut M10, etc.)
Contact an authorized HiKOKI dealer in France or online with your machine's serial number (indicated on the nameplate)
Request the identical replacement parts HiKOKI bearing the reference number in the diagram

Important: The HiKOKI manual clearly states that only identical spare parts should be used for repairs. For any specific part you cannot find, a HiKOKI dealer can advise you by referring to the complete technical documentation.

Question 2

How to replace the blade of the CJ 18DSL jigsaw?

Accepted Answer

Preparation

Turn off the device and disconnect the battery. Important note: do not open the lever while the piston is in motion.

Removal and installation

Use the provided wrench to loosen the blade fixing screw
Remove the old blade and insert the new one, ensuring that the protruding parts of the blade are properly inserted into the blade holder
Make sure the blade is positioned between the groove of the roller
Tighten the fixing screw securely

After replacement

Check that the blade rotates correctly after installation. Select the type of blade according to your material: refer to table 3 of the manual for the appropriate references (wood, metal, plastic).

For more details with visual diagrams, refer to pages 181-183 of the user manual.

Question 3

How to replace the motor brushes (carbon) of the CJ 18DSL jigsaw?

Accepted Answer

The PDF of this manual does not specify the procedure for replacing the motor brushes (carbon). The brushes are internal parts of the motor that are not intended for replacement by the user.

However, here is what you need to know about the brushes of your CJ 18DSL:

Signs of wear: If the motor produces visible sparks, loses power, or makes abnormal noises, the brushes are likely worn.
Recommendation: Have the replacement done by an authorized HiKOKI repair shop. They have the original parts and specialized tools for a safe intervention.
Preventive maintenance: The manual recommends keeping the device clean by regularly wiping it with a dry cloth or one dampened with soapy water. This reduces premature wear of the motor.

User manual HiKOKI Saw : user manuals and guides in PDF

Models HiKOKI Saw most viewed

Other categories HiKOKI

Recent questions about Saw HiKOKI