User manual HiKOKI String Trimmer : 17 free PDF user manuals

Q: How to change the cutting line of the HiKOKI CG36DA lawn mower

Replacing the cutting line of your HiKOKI CG36DA (string trimmer) involves several simple steps: Preparation Obtain 4 m of genuine nylon line (code no. 335235 if you take the original HiKOKI spool). Replacement procedure Remove the cover : Press on the opposite tabs of the chassis, then remove the cover. Remove the spool : Take the spool off the chassis. Wind the line : Unwind about 150 mm of line on each side, fold the center and attach it to the hook of the spool. Then wind the line onto the spool in the direction indicated by the arrow. Secure the stop : Leave between 100 mm and 150 mm of unwound line, then hook and secure the line in the stop. Insert the spool : Reinsert the spool aligning the stop with the eyelet of the line guide, insert the button and thread the line. Close the cover : Press the tabs of the chassis to snap them into the locking holes. Cut the line to length : Pull the line to ensure it is taut, then cut it to a length of 90 mm to 110 mm. Your lawn mower is ready for use.

Q: How to change the cutting line of the HiKOKI CG36DA lawn mower

Replacing the cutting line of your HiKOKI CG36DA (string mower) is done in several simple steps: Preparation Get 4 m of genuine nylon line (code no. 335235 if you take the original HiKOKI spool). Replacement procedure Remove the cover : Press on the opposite tabs of the chassis, then remove the cover. Remove the spool : Take the spool off the chassis. Wrap the line : Unwind about 150 mm of line on each side, fold the center and attach it to the hook of the spool. Then wrap the line around the spool in the direction indicated by the arrow. Secure the stop : Leave between 100 mm and 150 mm of unwound line, then hook and secure the line in the stop. Insert the spool : Reinsert the spool aligning the stop with the line guide eyelet, insert the button and thread the line. Close the cover : Press on the tabs of the chassis to snap them into the locking holes. Cut the line to length : Pull the line to make it taut, then cut it to a length of 90 mm to 110 mm. Your lawn mower is ready for use.

Models HiKOKI String Trimmer most viewed

User manual HiKOKI String Trimmer : user manuals and guides in PDF

Models HiKOKI String Trimmer most viewed

Other categories HiKOKI

Recent questions about String Trimmer HiKOKI