IVR-L 65/24-2 Tc - Vacuum Cleaner Kärcher - Free user manual and instructions
Find the device manual for free IVR-L 65/24-2 Tc Kärcher in PDF.
User questions about IVR-L 65/24-2 Tc Kärcher
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual IVR-L 65/24-2 Tc - Kärcher and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IVR-L 65/24-2 Tc by Kärcher.
USER MANUAL IVR-L 65/24-2 Tc Kärcher
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "\_\_\_\_", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
IVR-L 65/12-1
IVR-L 65/12-1 Tc
IVR-L 65/24-2 Tc
Deutsch 5
English 11
Français 17
Italiano 23
Español 30
Português 36
Nederlands 42
Türkçe 48
Svenska 54
Suomi 60
Norsk 66
Dansk 71
Eesti 77
Latviešu 83
Lietuviškai 89
Polski 95
Magyar 101
Čeština 108
Slovenčina 114
Slovenščina 120
Română 126
Hrvatski 132
Srpski 138
Ελληνικά 144
Русский 151
Українська 158
Қазақша 165
Български 172
中文 179
العربيya 185
natural_image
Abstract geometric symbol with a star-like shape inside a circle (no text or symbols)EAC
Read Online
99908170 (12/24)
Register your product
www.kaercher.com/welcome
A
text_image
Technical diagram of a vacuum cleaner with numbered parts and labeled components
natural_image
Technical line drawing of a mechanical device with pipes and housing (no text or symbols)
natural_image
Technical line drawing of a mechanical component with arrows indicating rotation (no text or symbols)
natural_image
Diagram of a device with two switches and directional arrows, no text or symbols present
text_image
E MUSTAVEL MACTRAL
natural_image
Diagram of a mechanical or fluidic device with two directional arrows indicating flow or movement (no text or symbols present)
natural_image
Mechanical device with wheels and a cylindrical component, no visible text or symbols
natural_image
Technical line drawing of a mechanical device with wheels and a cylindrical component, showing rotational motion arrows (no text or symbols)
natural_image
Technical diagram showing a mechanical assembly with curved components and a black arrow indicating rotation (no text or symbols)
natural_image
Technical diagram of a mechanical assembly with an inset close-up showing a blue component being inserted (no text or symbols present)Inhalt
text_image
Diagram showing a red 'X' symbol above a container with a blue checkmark and arrow, indicating a collision or failure.Hinweis
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
Contents
General instructions ...... 11
Intended use 11
Environmental protection 11
Accessories and spare parts...... 12
Scope of delivery 12
Safety devices.... 12
Device description.... 13
Start-up 13
Operation 13
Finishing operation.... 14
Transport.... 14
Storage 15
Care and service.... 15
Troubleshooting guide 15
Warranty 15
Technical data.... 16
EU Declaration of Conformity ..... 16
General instructions
Read these original instruc- tions before using your device
for the first time, adhere to the instructions contained therein and store them for later reference or subsequent owners.
- Be sure to read the safety instructions no. 5.956-249.0 prior to the initial start-up.
- If the operating instructions and safety instructions are not observed, the device can be damaged and dangers could arise for users and other persons.
- Notify the dealer immediately in the case of shipping damage.
Intended use
⚠ WARNING
Inhalation of dusts posing a health hazard
Health hazard
Never use the appliance to vacuum up dusts which pose a health hazard.
ATTENTION
Short-circuit due to high levels of humidity
Damage to the device
Only use the device indoors.
The device is intended for:
- the vacuuming of liquids containing oil, cooling lubricants and chippings.
- the vacuuming of flammable liquids (flash point above 55 °C).
- the vacuuming of non-explosive substances.
- the vacuuming of dusts and coarse dirt.
- the industrial use, e.g. in storage and production areas.
- the commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices, and rental companies.
The device is not intended for:
• the vacuuming of fine dust.
- the vacuuming of flammable liquids (flammable, easily flammable, highly flammable according to Dangerous Substances Directive 67/548/EEC) (flash point below 55 °C) and mixtures of flammable dusts and liquids.
Any other use will be regarded as improper use.
Environmental protection
The packing materials can be recy- cled. Please dispose of packaging in
accordance with the environmental regulations.
Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found at: www.kaercher.de/REACH
Accessories and spare parts
Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.
Scope of delivery
Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.
Safety devices
Hazard levels
⚠️DANGER
- Indication of an imminent threat of danger that will lead to severe injuries or even death.
⚠ WARNING
- Indication of a potentially dangerous situation that may lead to severe injuries or even death.
△CAUTION
- Indication of a potentially dangerous situation that may lead to minor injuries.
ATTENTION
- Indication of a potentially dangerous situation that may lead to damage to property.
Safety instructions
⚠ WARNING
- The device is not suitable for vacuuming up dusts that are harmful to human health.
- Protect the device from rain. Do not store the device outdoors.
- Every time before use, check whether the equipotential bonding conductors (earthing conductors) are connected.
△CAUTION
- Switch off the device after each use and remove the mains plug.
ATTENTION
- Only use the device indoors.
- Risk of crushing! Wear gloves when removing or installing the suction head, filter inlay or collection container.
- Risk of damage! Never vacuum without a filter or with a damaged filter.
- Wear safety shoes when operating the device.
- Only move the device at walking speed, and to move down a decline, have two workers steady the device as necessary.
- Be careful to ensure that there is no dust spillage when replacing accessories.
Device with tilting chassis (Tc)
ATTENTION
Risk of injury
Risk of crushing due to the liquid container tipping
Allow the lock to latch after tipping.
Behaviour in the event of an emergency
⚠️DANGER
Risk of injury and material damage when vacuuming inflammable materials, or in the case of a short-circuit or other electrical faults
Danger of inhalation of gases hazardous to health, danger of electric shock, danger of burns.
In the event of an emergency, switch off the device and unplug the mains plug.
Electrical connection
The device may only be connected to an electrical connection which has been set up by a qualified electrician as per IEC 60364.
For the connection values see Technical data and type plate. Use of an extension cable is prohibited.
⚠️DANGER
Danger of electric shock
Danger of death
Avoid damaging the power cables by driving over them or otherwise crushing them, or by jerking them.
Protect the cables from heat, oil and sharp edges.
Check the mains connection of the device for damage every time before operation.
Do not operate the device using a damaged cable. Have any damaged cables replaced by a qualified electrician.
Symbols on the device
Marking the maximum permissible fluid level
See chapter Checking the filling level display.
text_image
Flüssigkeits- Füllstand MAXIMALATTENTION
Risk of damage to the device
Leaking water due to the maximum fluid level being exceeded.
Drain the device before the maximum fluid level is reached.
Device description
For the figures, please refer to the graphics pages
Illustration A
① Steering rollers with parking brake
②Maximum filling level mark
③Drain hose
④Liquid container
⑤Push handle
⑥Deflector plate
⑦ Small deflector plate
⑧filter
⑨Suction head
⑩Suction hose connection
⑪Power switch
⑫Suction head lock
⑬Mains cable
⑭Tilting chassis (Tc variant only)
⑮Accessory holder
⑯ Unlocking lever (Tc variant only)
Start-up
See graphics page for illustrations
- Bring the device into the working position.
- If necessary, secure the device using the parking brake.
- Ensure that the suction head is fitted correctly.
- Insert the suction hose into the suction hose connection.
Illustration B
- Plug the desired accessory onto the suction hose.
Operation
For the figures, please refer to the graphics pages
- Plug the mains plug into the socket.
- Switch on the device at the trigger.
Illustration C
Device with a motor (IVR-L...-1)
Illustration D
Device with two motors (IVR-L...-2)
Note
Operation with a motor
Twin-engine drive units can also be operated with only one turbine.
3. Start vacuuming.
Suction process
text_image
Diagram showing a red 'X' symbol above a container with liquid and a green checkmark, indicating a verification or rejection process.Note
Only immerse the accessory halfway when vacuuming liquids to encourage sufficient air.
Checking the filling level display
See graphics pages for illustration
Illustration E
Note
The red marking on the drain hose shows the maximum permissible filling level.
ATTENTION
Risk of damage to the device
The liquid container will overflow within a few seconds of filling.
Constantly check the filling level in the liquid container when filling large quantities of liquid.
Emptying the liquid container
For the figures, please refer to the graphics pages
- Switch the device off and disconnect it from the power supply.
- Move the device to the waste water tank.
- Empty the liquid container:
a Connect the drain hose to the upper hose coupling. Illustration F
b Hold the drain hose over a suitable collecting container and drain the contents. - Dispose of or reuse the contents in accordance with statutory regulations.
Emptying the liquid container by tilting
See graphics page for illustrations
- Switch the device off and disconnect it from the power supply.
- Move the device to the waste water tank.
- Remove the suction head, (see chapter Removing the suction head).
- Remove all accessory parts.
- Prepare the liquid container for emptying:
- Using the tilting device Tc (Tc variant only) a Open the lock of the liquid container. Illustration G
- By tilting the liquid container a Tip the liquid container.
-
Tip the container with the push handle. Illustration H
-
Dispose of or reuse the contents in accordance with statutory regulations.
- Fit and lock the suction head.
Cleaning the liquid container
For the figures, please refer to the graphics pages
Note
Bacterial contamination may occur through the use of water-based cooling lubricants.
Wear suitable protective clothing when removing deposits.
- Empty the container.
- Remove deposits in the container.
- Dispose of the deposits in accordance with the applicable regulations.
Removing the suction head
See graphics page for illustrations
- Switch off the device and disconnect from the power supply.
- Open the lock for the suction head. Illustration I
- Remove the suction head and put to one side.
Finishing operation
- Switch off the device using the on/off switch
- Empty and clean the liquid container.
- Remove the accessories and clean and dry them as necessary.
Note
Empty the vacuum cleaner after every use. Allow the vacuum cleaner to dry with the container open.
Transport
△CAUTION
Failure to observe the weight
Risk of injury and damage Be aware of the weight of the device during transport and storage.
- When transporting in vehicles, secure the device against slipping and tipping over according to the applicable guidelines.
Storage
△CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transport and storage.
- Store the device indoors only.
Care and service
- Rinse off the device and accessories at regular intervals using a suitable liquid and allow to dry.
- To prevent contamination, do not leave fluids in the device.
- For longer breaks in operation, open the cover to allow the residual moisture to evaporate.
- Replace the filter if damaged.
Replacing the filter
See graphics page for illustrations Illustration J
- Remove the suction head (see chapter Removing the suction head).
- Loosen the screws of the tensioning rings.
- Remove the small deflector plate.
- Remove and replace the filter.
- Insert the new filter.
Ensure that the filter is inserted correctly during installation. - Fit the tensioning rings and screw them on.
Troubleshooting guide
⚠️DANGER
Risk of injury
Danger of the device unintentionally starting and danger of electric shock
Switch off the device and unplug the mains plug before performing any work on the device.
Have all checks and work on electrical parts performed by an qualified technician.
The motor (suction turbine) does not start up
No electrical voltage present
- Check the socket and the power supply fuse.
- Check the mains cable and the mains plug of the device.
The suction power decreases
Nozzle, suction hose or suction pipe clogged.
- Check the nozzle, the suction hose and the suction pipe and clean if necessary. The filter is dirty.
- Clean the filter.
Emptying the liquid container takes a long time
The drain hose is kinked or blocked.
- Check and, if necessary, clean the drain hose.
Customer Service department
If the malfunction cannot be corrected, the device must be checked by the Customer Service department.
Warranty
The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing flaw is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.
(See overleaf for the address)
Further warranty information (if available) can be found in the service area of your local Kärcher website under "Downloads".
Technical data
| IVR-L 65/12-1 | IVR-L 65/12-1 Tc | IVR-L 65/24-2 Tc | |||
| Electrical connection | |||||
| Mains voltage V 220-240 220-240 220-240 | |||||
| P | h | a | s | e | ~ |
| Power frequency Hz 50-60 50-60 50-60 | |||||
| Degree of protection I I I | |||||
| Nominal power W 1200 1200 2400 | |||||
| Power protection (slow-blowing) | A | 16 | 16 | 16 | |
| Dimensions and weights | |||||
| Typical operating weight | kg | 38 | 42 | 44 | |
| Length x width x height | mm | 718 x 526 x 1251 | 737 x 532 x 1326 | 737 x 532 x 1326 | |
| Ambient conditions | |||||
| Ambient temperature | °C | +40 | +40 | +40 | |
| Device performance data | |||||
| Tank content | I | 65 | 65 | 65 | |
| Air quantity | l/s | 1 x 74 | 1 x 74 | 2 x 74 | |
| Vacuum | kPa (mbar) | 23 (230) | 23 (230) | 23 (230) | |
| Nominal width of the suction hose | DN50 DN50 DN50 | ||||
| Determined values in acc. with EN 60335-2-69 | |||||
| Hand-arm vibration value | m/s^2 | < 2.5 < 2.5 | < 2.5 | ||
| Uncertainty K | m/s^2 | 0,2 | 0,2 | 0,2 | |
| Sound pressure level L_pA | dB(A) | 65 | 65 | 67 | |
| Uncertainty K_pA | d | B | ( | A | |
| Mains cable | |||||
| Mains cable H07BG-F | mm^2 | 3 x 1.5 | 3 x 1.5 | 3 x 1.5 | |
| Part number (EU) | 9.990-835.0 | 9.990-835.0 | 9.990-835.0 | ||
| Cable length | m | 10 | 10 | 10 | |
Subject to technical modifications.
EU Declaration of Conformity
We hereby declare that the product named below complies with the relevant provisions of the directives and regulations listed. This declaration is invalidated by any changes made to the product that are not approved by us.
Product: Dry vacuum cleaner
Product: Wet/dry vacuum cleaner
Type: 9.990-xxx
Directives and Regulations
2006/42/EC (+2009/127/EC)
2014/30/EU
2011/65/EU
Harmonised standards used
EN 55014-2: 2015
EN 55014-1: 2017 + A11: 2020
EN 60335-1
EN 60335-2-69
EN IEC 61000-3-2: 2019
EN 61000-3-3: 2013 + A1: 2019
EN 61000-3-11: 2000
EN 62233: 2008
EN IEC 63000: 2018
Name and address
Documentation supervisor:
A. Haag
Kärcher Industrial Vacuuming GmbH
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
The signatories act on behalf of and with the authority of the Executive Board.
Kärcher Industrial Vacuuming GmbH
73550 Waldstetten (Germany)
Ph.: +49 7171 94888-0
Fax: +49 7171 94888-528
Contenu
text_image
Diagram illustrating a collision between two containers with a red 'X' symbol and a green checkmark, showing an arrow indicating collision direction.Remarque
2006/42/CE (+2009/127/CE)
2014/30/UE
2011/65/UE
73550 Waldstetten (Germany)
Tél. : +49 7171 94888-0
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tél. : +49 7171 94888-0
text_image
Diagram showing a red 'X' symbol and a green checkmark with an arrow pointing to a container, indicating a correct or checked condition.Nota
9.990-835.0 9.990-835.0 9.990-835.0
10 10 10
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
text_image
Diagram showing a red 'X' symbol above a container with a checkmark, and a green checkmark above another container with an arrow indicating flow or change.Nota
2006/42/CE (+2009/127/CE)
2014/30/UE
2011/65/UE
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
text_image
Diagram illustrating a collision between two containers with a red 'X' symbol and a green checkmark, showing an arrow indicating collision direction.Aviso
2006/42/CE (+2009/127/CE)
2014/30/UE
2011/65/UE
text_image
Diagram showing a red 'X' above a container and a green checkmark above another container, with arrows indicating flow or movement.Instructie
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
İçindekiler
text_image
Diagram showing a red 'X' above a container and a green checkmark above another container, with arrows indicating direction of change.Not
2006/42/AT (+2009/127/AT)
2014/30/AB
2011/65/AB
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Faks: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Faks: +49 7171 94888-528
Innehåll
Allmän information 54
text_image
Diagram illustrating a collision between two objects with checkmarks and a red 'X' symbol, showing a collision process.Hänvisning
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tfn: +49 7171 94888-0
Fax: +49 7171 94888528
Sisältö
text_image
Diagram showing a red 'X' above a container and a green checkmark above another container, with arrows indicating direction of change.Huomautus
73550 Waldstetten (Germany)
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
text_image
Diagram showing a container being stopped by water with red 'X' and green checkmark indicating failure or rejection.Merknad
2006/42/EF (+2009/127/EF)
2014/30/EU
2011/65/EU
Anvendte harmoniserte standarder
EN 55014-2: 2015
EN 55014-1: 2017 + A11: 2020
EN 60335-1
EN 60335-2-69
EN IEC 61000-3-2: 2019
EN 61000-3-3: 2013 + A1: 2019
EN 61000-3-11: 2000
EN 62233: 2008
EN IEC 63000: 2018
Navn og adresse
73550 Waldstetten (Germany)
Tlf.: +49 7171 94888-0
Faks: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tlf.: +49 7171 94888-0
Faks: +49 7171 94888-528
Indhold
text_image
Diagram showing a red 'X' above a container and a green checkmark above another container, with arrows indicating collision or damage.Obs
2006/42/EF (+2009/127/EF)
2014/30/EU
2011/65/EU
73550 Waldstetten (Germany)
Tlf.: +49 7171 94888-0
Fax: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tlf.: +49 7171 94888-0
Fax: +49 7171 94888-528
Sisukord
Üldjuhised 77
text_image
Diagram showing a red 'X' above a container and a green checkmark above another container, with arrows indicating collision or damage.Märkus
2006/42/EÜ (+2009/127/EÜ)
2014/30/EL
2011/65/EL
73550 Waldstetten (Germany)
Tel: +49 7171 94888-0
Faks: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tel: +49 7171 94888-0
Faks: +49 7171 94888-528
Saturs
text_image
Diagram showing a red 'X' symbol above a container and a green checkmark with an arrow pointing to it, indicating a correct or checked condition.Norādījum
T. Wahl
Managing Director
A. Haag
Director R&D
Valdštatene, 2024/12/01
text_image
Diagram showing a red 'X' symbol above a container with a checkmark, and a green checkmark above another container with an arrow indicating flow or collision.Pastaba
text_image
Diagram showing a red 'X' symbol above a container with liquid, and a green checkmark above another container with an arrow indicating flow or inspection.Wskazówka
2006/42/WE (+2009/127/WE)
2014/30/UE
2011/65/UE
text_image
Diagram showing a red 'X' symbol and a green checkmark with an arrow pointing to a water surface, indicating a collision or failure.Megjegyzés
text_image
Diagram showing a red 'X' above a container and a green checkmark above another container, with arrows indicating collision or damage.Upozornění
2006/42/ES (+2009/127/ES)
2014/30/EU
2011/65/EU
text_image
Diagram showing a red 'X' symbol and a green checkmark with an arrow pointing to a container, indicating a correct or accurate action.Upozornenie
2006/42/ES (+2009/127/ES)
2014/30/EÚ
2011/65/EÚ
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Fax: +49 7171 94888-528
Kazalo
Splošni napotki.... 120
Namenska uporaba.... 120
text_image
Diagram showing a red 'X' symbol above a gray container with liquid, and a green checkmark above another container with an arrow indicating flow or damage.Napotek
text_image
Diagram illustrating a collision between two containers with a red 'X' symbol and a green checkmark, showing an arrow indicating collision direction.Indicatie
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
text_image
Diagram showing a red 'X' symbol above a container with liquid, and a green checkmark above another container with an arrow indicating flow or inspection.Napomena
Prilikom usisavanje tekućina uronite opremu samo do pola kako bi osigurali i dovoljnu količinu zraka.
2006/42/EZ (+2009/127/EZ)
2014/30/EU
2011/65/EU
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Faks: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tel.: +49 7171 94888-0
Telefaks: +49 7171 94888-528
Sadržaj
Opšte napomene 138
Namenska upotreba.... 138
text_image
Diagram showing a red 'X' symbol above a gray container with water, and a green checkmark with an arrow pointing to it.Napomena
Prilikom usisavanja tečnosti uronite pribor samo do pola da bi se unela i dovoljna količina vazduha.
Provera prikaza nivoa punjenja
Slika, pogledajte strane sa grafikonima Slika E
Napomena
Crvena oznaka na crevu za ispuštanje prikazuje maksimalni dozvoljeni nivo napunjenosti.
PAŽNJA
Opasnost od oštećenja uređaja
Prelivanje rezervoara za tečnost usled punjenja u roku od svega nekoliko sekundi. Proveravajte stalno nivo napunjenosti rezervoara za tečnost prilikom prihvata velike količine tečnosti.
Pražnjenje posude za tečnost
Slika pogledajte stranice sa grafikonom
- Isključite uređaj i isključite ga iz napajanja.
- Pokrenite uređaj za uređaj za pražnjenje tečnosti.
- Pražnjenje rezervoara za tečnost:
a Odvojite crevo za ispuštanje na gornjoj spojnici creva.
b Držite crevo za ispuštanje iznad odgovarajuće sabirne posude i ispustite sadržaj. - Odložite u otpad sadržaj skladu sa zakonskim odredbama ili ponovo koristite.
Slika F
Pražnjenje posude za tečnost naginjanjem
Slike pogledajte stranice sa grafikonom
2006/42/EZ (+2009/127/EZ)
2014/30/EU
2011/65/EU
Primenjene harmonizovane norme
EN 55014-2: 2015
EN 55014-1: 2017 + A11: 2020
EN 60335-1
EN 60335-2-69
EN IEC 61000-3-2: 2019
EN 61000-3-3: 2013 + A1: 2019
EN 61000-3-11: 2000
EN 62233: 2008
EN IEC 63000: 2018
Naziv i adresa
Lice ovlašćeno za dokumentaciju:
A. Haag
Kärcher Industrial Vacuuming GmbH
Robert-Bosch-Strasse 4-8
73550 Waldstetten (Nemačka)
Tel.: +49 7171 94888-0
Faks: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Valdšteten, /12/01
Potpisnici deluju u ime i uz punomoć rukovodstva.
Kärcher Industrijsko usisavanje GmbH
text_image
Diagram showing a red 'X' and green checkmark with arrows pointing to a floating container on water, indicating a collision or failure.Υπόδειξη
73550 Waldstetten (Germany)
Tηλ.: +49 7171 94888-0
Φαξ: +49 7171 94888-528
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
73550 Waldstetten (Germany)
Tηλ.: +49 7171 94888-0
Φαξ: +49 7171 94888-528
Содержание
Общие указания 151
text_image
Diagram illustrating a collision between two containers with a red 'X' symbol and a green checkmark, showing an arrow indicating collision direction.Примечание
T. Wahl
Managing Director
A. Haag
Director R&D
г. Вальдштеттен, 2024/12/01
text_image
Diagram showing a red 'X' above a container and a green checkmark above another container, with arrows indicating collision or movement.Вказівка
T. Wahl
Managing Director
A. Haag
Director R&D
text_image
Diagram showing a red 'X' symbol and a green checkmark with an arrow pointing to a container on water, indicating a correct or incorrect operation.Нускау
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
text_image
Diagram showing a red 'X' above a container and a green checkmark above another container, with arrows indicating collision or damage.Указание
73550 Waldstetten (Germany)
T. Wahl
Managing Director
A. Haag
Director R&D
Валдщетен, 2024/12/01
73550 Waldstetten (Germany)
text_image
Diagram showing a red 'X' symbol and a green checkmark with an arrow, both pointing at a floating container on water.提示
T. Wahl
Managing Director
A. Haag
Director R&D
Waldstetten, 2024/12/01
text_image
Diagram illustrating a collision between two containers with a red 'X' symbol and a green checkmark indicating collision direction.إرشاد
natural_image
Icon showing a gear and wrench inside a square frame (no text or symbols)http://www.kaercher.com/dealersearch
