Vita - Bottle sterilizer Neno - Free user manual and instructions

USER MANUAL Vita Neno

USER MANUAL Dear Customer, thank you for purchasing Neno Vita. Please refer to the user manual for informaon concerning safety, use and disposal.

1. Read the user manual carefully before use.

2. To avoid overowing of the appliance, do not clean it under running

3. Keep the appliance away from children and infants. Unplug the

appliance if it is not used for a long me.

4. If the power cord is damaged, you must have it replaced by a Neno

authorized service center to avoid hazard.

5. Do not pour milk or food directly into the heang container.

6. Before feeding the baby, check the food temperature on your wrist.

Make sure the food does not cook for too long to not lose nutrients.

7. A slight plasc smell will appear aer a few rst uses, which is normal

and will disappear with me.

8. The appliance can be used by children aged 8 years and above if

they have been given supervision or instrucon on the use of the appliance, and if they understand the hazards involved. Cleaning and maintenance must not be done by children unless they are 8 years or older and under supervision. Keep the appliance and its cord out of reach of children younger than 8 years old.

9. The machine can be used by people with reduced physical, sensory,

or mental capabilies or with a lack of experience and knowledge if they have been given supervision or instrucon on the use of the appliance, and if they understand the hazards involved. Tips: For a beer comfort of use, wipe the appliance with a damp cloth before rst use. Clean the bole strainer, pour water into the heang cup, and turn on the sterilizaon.Aer the sterilizaon is nished, pour out the water and let the appliance dry naturally.

02. CLEANING AND MAINTENANCE

1. When cleaning, please unplug the power plug and wait for the

heang plate to cool to room temperature before cleaning.8

2. Do not scratch the heang surface with sharp metal objects.

3. In case of accumulang scale, pour a mixture of citric acid, vinegar

and water into the water container and boil using the sterilize funcon.

4. It is recommended to clean the appliance every 10-15 days.

5. Aer cleaning the machine let it dry naturally.

6. It is recommended to pour a mixture of citric with vinegar or deter-

gent and put aside for 10 minutes and then rinse with water.

Rated Power: AC 220~240V 500W Recommended room temperature & humidity: 15-30°C / 30% - 80% Warranty: 2 years

1. 1. Aer you plug the appliance into the socket it will automacally

switch to standby mode.

2. Press (H) , to turn the appliance on or o. Aer turning on, the

buons on the display panel will light up.

3. Press the buon (C), to pick the heang, defrosng, warming food

and sterilizaon funcons. a. To heat up milk: press the heang milk funcon and a (I) icon will light up and the display will show a temperature of 40°C by default. To change the temperature range from 35 to 50 °C use + and – buons. The icon will ash 2 mes, the buzzer will beep, and the machine will start working. During the heang process, the display will show the current and the selected temperature. b. Thaw: select the thaw funcon and the (K) icon will light up, and the display will show a temperature of 37°C by default. To change the temperature range from 30 to 45°C use + and – buons. The icon will ash 2 mes, the buzzer will beep, and the machine will start working. During the heang process, the display will show the current and the selected temperature. c. Heat food: select the heat food funcon and the (J) icon will light up, and the display will show a temperature of 75°C by default. To change the temperature range from 60 to 80°C use + and – buons. The icon will ash 2 mes, the buzzer will beep, and the9 machine will start working. During the heang process, the display will show the current and the selected temperature. d. Sterilize: add about 150ml of water to the milk warmer and select the sterilize funcon. The (L) icon will light up and the display will show a temperature of 100 °C, and then show the process of temperature rise. Aer the water is boiled, sterilize for 10 minutes. The sterilizaon me is xed and cannot be changed - it takes 10 minutes.

4. Time sengs: The TIMER buon is responsible for seng the me,

aer which the power-on device will start the previously selected mode. To set the mer, select one of the three modes (heang milk, feed, defrost), set the target temperature with the +/- buons. Then click TIMER and select the me (from 1 to 24 hours), aer which the device will start working on the selected mode. NOTE: does not apply to the sterilizaon process.

5. Night light: press the (E) buon and the night light will turn on.

6. NOTE: The device maintains the temperature in the selected mode

(warming milk, warming food, defrosng) for 72h unless it is turned o or another funcon is not started.

05. ASSEMBLY AND USE

SEE FIG. 2 Add water to the same level as milk in the bole. The water cannot exceed the MAX logo.

1. Fill the bole with milk and then place it in the strainer.

2. Add the correct amount of water into the milk warmer.

ATTENTION! The appliance has a built-in an overheat protecon. If there is no water in the water tank, the screen will display an E3 warning, and the machine will not work.

Dear Customer, thank you for purchasing the Neno Vita baby formula machine. If you have any problems in normal use condions, please contact the authorizedNeno distributor. Please keep the warranty card and show it to the distributor when repairing. The product is covered by a 24-month warranty. The terms of the guarantee can be found at: hps://neno.pl/gwarancja Details, contact and website address can be found at: hps://neno.pl/ kontakt Specicaons and contents of the kit are subject to change without noce. We apologise for any inconvenience.10