PLHLA 20Li A1 - LED Lighting PARKSIDE - Free user manual and instructions

Product type	Cordless LED work light
Brand	Parkside
Model	PLHLA 20Li A1
Rated voltage	20 V
Rated power	3 W
Luminous flux	280 lm
Number of LEDs	1 x 3 W
Adjustable lighting angles	12 positions
Swivel hook	Yes, for hanging
Protection type	IP20
Protection class	III
Battery compatibility	Parkside X 20 V TEAM (battery not included)
Battery charge indicator	LED: red (empty), yellow (half charge), green (full)
Recommended use	Indoor, workshop, dry spaces
Ambient lighting	Not suitable
Maintenance	No maintenance required
Cleaning	Dry soft cloth, brush for slots
Repairability	Light source non-replaceable, entire unit must be replaced
Warranty	3 years (France and Belgium)
Included accessories	User manual only

Frequently Asked Questions - PLHLA 20Li A1 PARKSIDE

Which batteries are compatible with the Parkside PLHLA 20Li A1 lamp?

The lamp is compatible with all batteries from the Parkside X 20 V TEAM range. The battery and charger are not included in the delivery.

Can the lamp be used as the main lighting of a room?

No, the LED work light is designed for supplementary lighting in dry spaces like a workshop. It is not suitable for ambient lighting.

How can I hang the lamp?

Use the swivel hook (2) on the top. Unfold it and hang the lamp on a hook or rod.

What does the LED charge indicator on the battery mean?

The 3-LED indicator (red, yellow, green) shows the charge status: red = empty battery, red+yellow = half charge, red+yellow+green = full charge.

Can I replace the LED if it stops working?

No, the light source is non-replaceable. At the end of the LED's life, the entire appliance must be replaced.

How to clean the lamp?

Turn off the lamp and remove the battery. Clean with a dry, soft cloth to avoid scratching the cover. Use a brush for the slots. Do not use water or aggressive agents.

Is the lamp waterproof?

The lamp has an IP20 protection rating, which means it is not waterproof. It is protected against solid objects >12.5 mm but not against water. Use it only in dry spaces.

What is the battery life with a full battery?

The battery life depends on the capacity of the battery used (not included). With a standard 2 Ah battery, the runtime is approximately 2 to 3 hours of continuous use.

What accessories are included with the lamp?

The delivery includes only the lamp and the user manual. The battery and charger must be purchased separately from the Parkside X 20 V TEAM range.

What is the warranty period?

The warranty is 3 years from the date of purchase (conditions for France and Belgium). Keep the receipt as proof.

USER MANUAL PLHLA 20Li A1 PARKSIDE

Black Parkside flashlight device with visible lens and base (no text or symbols on body)

Akku-LED-Handlampe 20 V / Cordless LED Work Light 20 V / Lampe torche LED sans fi l 20 V PLHLA 20-Li A1

DE AT CH

Akku-LED-Handlampe 20 V

Cordless LED Work Light 20 V

Translation of the original instructions

NL BE

Accu-LED-handlamp 20 V

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

Close-up of a flashlight with a cable being inserted, showing the handle and cable attachment (no text or symbols visible)

Inhalt

Einleitung......4

Bestimmungsgemäße

Verwendung......4

Service-Center......12

Importeur ......12

Original-

Recyclingsymbol: Wellpappe

Intended purpose......13

General description......14

Extent of the delivery....14

Functional description......14

Overview....14

Technical data......14

Safety instructions......15

Symbols and icons......15

Safety notices for battery-powered lamps....15

Operation 16

Inserting/removing the battery.16

Checking the battery charge level....17

Switching ON and OFF......17

Working instructions .....17

Swivelling the rechargeable LED handlamp....17

Hanging the rechargeable LED handlamp....17

Maintenance....17

Cleaning 17

Storage......17

Disposal and protection of the environment......18

Accessories ......18

Guarantee 18

Repair Service......20

Service-Center......20

Importer ......20

Translation of the original EC declaration of conformity ....85

Exploded Drawing ......93

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product. During production, this equipment has been checked for quality and subjected to a final inspection. The functionality of your equipment is therefore guaranteed.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal. Before using the product, familiarise yourself with all of the operating and safety instructions.

Use the product only as described and for the applications specified. Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended purpose

This powerful rechargeable LED handlamp with bright, even working light is suitable for illuminating dry, poorly lit indoor areas, such as hobby workshops. The handlamp is not intended to be used as room lighting.

The rechargeable LED handlamp is a special product and its design, like the built-in

GB IE

battery, withstands extreme physical strains (1.0 m ^2 /s ^3 ; 200 - 2000 Hz) in the form of shocks. The device is only intended for normal indoor use. This device is not suitable for commercial use The device is part of the Parkside X 20 V TEAM series and can be operated using Parkside X 20 V TEAM series batteries. The batteries may only be charged using chargers from the Parkside X 20 V TEAM series.

The rechargeable LED handlamp is only intended for normal indoor use

General description

The illustrations can be found on the fold-out page.

Extent of the delivery

Carefully unpack the appliance and check that it is complete.

• Cordless LED Work Light
• Instruction Manual

Dispose of the packaging material correctly.

Battery and charger are not included.

Functional description

Refer to the following descriptions for a functional description of the controls.

Overview

1 Lamp head
2 Rotating hooks
3 Button for charge level indicator
4 LED battery charge level indicator
5 Rechargeable battery
6 Release button
7 On/off switch

Technical data

Cordless LED Work Light PLHLA 20-Li A1

Nominal voltage U.....20V =

Power......ca. 0.15 A

Rated output Pmax ...... 3 W

Number of lamps (LED) 1 x 3 W

Light output......280 lm

Protection class....III

Protection category ...... IP20

Attention! An up-to-date list of battery compatibility can be found at: www.lidl.de/akku

Safety instructions Symbols and icons

Symbols on the appliance:

Electrical appliances must not be disposed of with the domestic waste.

Protection class

Direct voltage

This device is part of the Parkside X 20 V TEAM series.

Do not look into the light source.

Symbols in the manual

Warning symbols with information on damage and injury prevention.

Help symbols with information on im-

proving tool handling.

Symbol on the packaging

Please dispose of packaging and product in an en- vironmentally fri- endly manner.

Recycling symbol: Corrugated cardboard

Safety notices for battery-powered lamps

• Do not cover the device when in use. The device becomes hot during use and can cause burns.
• Do not look into the light beam. Do not aim the light beam at people or animals.
  • Children under the age of 14 are not allowed to use the lamp.
• Do not allow children to use the device. They could inadvertently blind other people or themselves.
• Check that the device is

GB IE

secured properly. There is a risk of injury if the device falls down.

• The light source of this device is not replaceable. If the light source has reached the end of its life, then the whole device must be replaced.
• The luminaire housing protects against accidental contact with active parts. Do not open the housing.

Service

- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Special safety direc- tions for battery-oper- rated tools

- Ensure that the device is switched off before inserting the battery. Inserting a battery into

a power tool that is switched on may result in accidents.

- Do not use any accessories that are not recommended by PARKSIDE. This can result in electric shock or fire.

Observe the safety information and notes on charging and proper use as shown in the instruction manual for your battery and charger from the Parkside X 20 V TEAM series. A detailed description of the charging process and further information can be found in the separate operating instructions.

Operation

Inserting/removing the battery

1. To insert the battery (5), place it on the guide track and push it back into the appliance. It will audibly snap in.
2. To remove the battery (5) from the appliance, press the release buttons (6) on the battery and pull out the battery.

Checking the battery charge level

The battery's (4) charge level is indicated by the charge state indicator (5).

Press the button for the charge level indicator (3) on the battery.

The charge level of the battery is indicated by illumination of the corresponding LED light.

red-yellow-green =>

Battery fully charged red and yellow =>

Battery half charged

red =>

Battery needs to be charged

Switching ON and OFF

1. To start, press the on/off switch (7).
2. To switch the device off, press the on/off switch (7).

Working instructions

Do not look into the light source.

Swivelling the rechargeable LED handlamp

The tilting lamp head (1) can be adjusted to 12 different lighting angles.

Hanging the rechargeable LED handlamp

You can use the rotating hook (2) to hang the rechargeable LED handlamp on eyelets or poles. To do this, fold the rotating hook (2) outwards.

Maintenance

The appliance cleaner is maintenance free.

Cleaning

Switch the device off before cleaning and remove the battery from the device.

• Clean the device with a soft, dry cloth to avoid scratching the cover of the LED lamp and use a brush to clean the crevices on the device.
• Do not use any abrasive cleaning agents or solvents. These could damage the device irreparably.
• Do not use water or metallic aids. There is a risk of a short circuit.

Storage

Before prolonged storage, remove the battery from the device and charge it fully.

Disposal and protection of the environment

Remove the battery from the device and recycle the device and packaging in an environmentally-friendly manner. Instruction on how to dispose of the rechargeable battery can be found in the separate instruction manual.

Machines do not belong with domestic waste.

• Return the unit to a recycling centre. The plastics and metals in the unit can be sorted and appropriately recycled. Ask our Service Centre for details.
• Dispose of batteries in accordance with the local regulations. Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner. For information about this, ask your local waste management company or our service centre.
  • Defective units returned to us will be disposed of for free.

Accessories

Accessories can be obtained at www.grizzlytools-service.eu

If you have issues ordering, please use the contact form. If you have any other questions, contact the "Service-Center" (see page 20).

Guarantee

Dear Customer,

This device comes with a three-year warranty from the date of purchase.

In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.

If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a

brief written description of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The warranty is only valid for material or manufacturing defects. This warranty does not extend to consumable parts exposed to normal wear and tear. This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Neither does it extend to damage resulting from water, frost, lightning and fire or improper transport. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided.

The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure efficient handling of your query, please follow the directions below:

• Please have the receipt and item number (IAN 361690_2010) ready as proof of purchase for all enquiries.
• Please find the item number on the rating plate.
• Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.

• After consultation with our

customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you. We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect.

Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.

We will dispose of your defec-

tive devices free of charge when you send them to us.

Service-Center

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IAN 361690_2010

IE. Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., off peak))

E-Mail: [e-mail]

IAN 361690_2010

Importer

Please note that the following address is not a service address. Please initially contact the service centre specified above.

Service-Center......32

Importateur ......32

Accu-LED-handlamp ophangen 37

Onderhoud 37

Reiniging ....37

Bewaring 38

Verwerking en milieubescherming......38

Accessoires ....38

Garantie ....39

Reparatieservice ....40

Service-Center......41

Importeur ....41

Accu-LED-handlamp ophangen

Service-Center......58

Dovozce....58

Service-Center......66

Dovozca......66

Service-Center......74

Importør 74

Service-Center......83

Importador 83

GBIE	Translation of the originalEC declaration of conformity
We hereby confirm that theCordless LED Work Lightseries PLHLA 20-Li A1Serial number: 000001 – 143000conforms with the following applicable relevant version of the EU guidelines:
2014/30/EU • 2014/35/EU • 2011/65/EU* & (EU) 2015/863
In order to guarantee consistency, the following harmonised standards as well as national standards and stipulations have been applied:
EN 60598-1:2015/A1:2018 • EN 60598-2-8: 2013EN 62493:2015 • EN IEC 55015:2019/A11:2020EN IEC 63000:2018 • EN 61547:2009 • IEC 62471:2006
This declaration of conformity (21)** is issued under the sole responsibility of the manufacturer:
CEGrizzly Tools GmbH & Co. KGStockstädter Straße 2063762 GroßostheimGermany20.05.2021	Christian FrankDocumentation Representative

* The object of the declaration described above satisfies the provisions of Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful substances in electrical and electronic appliances.
** The last two digits of the year in which the CE marking was affixed.